source-engine-2018-hl2_src/materialsystem/stdshaders/Engine_Post_dx9.cpp
FluorescentCIAAfricanAmerican 3bf9df6b27 1
2020-04-22 12:56:21 -04:00

228 lines
10 KiB
C++

//========= Copyright Valve Corporation, All rights reserved. ============//
//
// Purpose:
//
// $NoKeywords: $
//=============================================================================
#include "BaseVSShader.h"
#include "screenspaceeffect_vs20.inc"
#include "engine_post_ps20.inc"
#include "engine_post_ps20b.inc"
#include "../materialsystem_global.h"
DEFINE_FALLBACK_SHADER( Engine_Post, Engine_Post_dx9 )
BEGIN_VS_SHADER_FLAGS( Engine_Post_dx9, "Engine post-processing effects (software anti-aliasing, bloom, color-correction", SHADER_NOT_EDITABLE )
BEGIN_SHADER_PARAMS
SHADER_PARAM( FBTEXTURE, SHADER_PARAM_TYPE_TEXTURE, "_rt_FullFrameFB", "Full framebuffer texture" )
SHADER_PARAM( AAENABLE, SHADER_PARAM_TYPE_BOOL, "0", "Enable software anti-aliasing" )
SHADER_PARAM( AAINTERNAL1, SHADER_PARAM_TYPE_VEC4, "[0 0 0 0]", "Internal anti-aliasing values set via material proxy" )
SHADER_PARAM( AAINTERNAL2, SHADER_PARAM_TYPE_VEC4, "[0 0 0 0]", "Internal anti-aliasing values set via material proxy" )
SHADER_PARAM( AAINTERNAL3, SHADER_PARAM_TYPE_VEC4, "[0 0 0 0]", "Internal anti-aliasing values set via material proxy" )
SHADER_PARAM( BLOOMENABLE, SHADER_PARAM_TYPE_BOOL, "1", "Enable bloom" )
END_SHADER_PARAMS
SHADER_INIT_PARAMS()
{
if( !params[ AAENABLE ]->IsDefined() )
{
params[ AAENABLE ]->SetIntValue( 0 );
}
if( !params[ AAINTERNAL1 ]->IsDefined() )
{
params[ AAINTERNAL1 ]->SetVecValue( 0, 0, 0, 0 );
}
if( !params[ AAINTERNAL2 ]->IsDefined() )
{
params[ AAINTERNAL2 ]->SetVecValue( 0, 0, 0, 0 );
}
if( !params[ AAINTERNAL3 ]->IsDefined() )
{
params[ AAINTERNAL3 ]->SetVecValue( 0, 0, 0, 0 );
}
if( !params[ BLOOMENABLE ]->IsDefined() )
{
params[ BLOOMENABLE ]->SetIntValue( 1 );
}
SET_FLAGS2( MATERIAL_VAR2_NEEDS_FULL_FRAME_BUFFER_TEXTURE );
}
SHADER_FALLBACK
{
// This shader should not be *used* unless we're >= DX9 (bloomadd.vmt/screenspace_general_dx8 should be used for DX8)
return 0;
}
SHADER_INIT
{
if ( params[BASETEXTURE]->IsDefined() )
{
LoadTexture( BASETEXTURE );
}
if ( params[FBTEXTURE]->IsDefined() )
{
LoadTexture( FBTEXTURE );
}
}
SHADER_DRAW
{
SHADOW_STATE
{
// This shader uses opaque blending, but needs to match the behaviour of bloom_add/screen_spacegeneral,
// which uses additive blending (and is used when bloom is enabled but col-correction and AA are not).
// BUT!
// Hardware sRGB blending is incorrect (on pre-DX10 cards, sRGB values are added directly).
// SO...
// When doing the bloom addition in the pixel shader, we need to emulate that incorrect
// behaviour - by turning sRGB read OFF for the FB texture and by turning sRGB write OFF
// (which is fine, since the AA process works better on an sRGB framebuffer than a linear
// one; gamma colours more closely match luminance perception. The color-correction process
// has always taken gamma-space values as input anyway).
// On OpenGL OSX, we MUST do sRGB reads from the bloom and full framebuffer textures AND sRGB
// writes on the way out to the framebuffer. Hence, our colors are linear in the shader.
// Given this, we use the LINEAR_INPUTS combo to convert to sRGB for the purposes of color
// correction, since that is how the color correction textures are authored.
bool bLinearInput = IsOSX() && g_pHardwareConfig->CanDoSRGBReadFromRTs();
bool bLinearOutput = IsOSX() && !g_pHardwareConfig->FakeSRGBWrite() && g_pHardwareConfig->CanDoSRGBReadFromRTs();
bool bForceSRGBReadsAndWrites = IsOSX() && g_pHardwareConfig->CanDoSRGBReadFromRTs();
pShaderShadow->EnableBlending( false );
// The (sRGB) bloom texture is bound to sampler 0
pShaderShadow->EnableTexture( SHADER_SAMPLER0, true );
pShaderShadow->EnableSRGBRead( SHADER_SAMPLER0, bForceSRGBReadsAndWrites );
pShaderShadow->EnableSRGBWrite( bForceSRGBReadsAndWrites );
// The (sRGB) full framebuffer texture is bound to sampler 1:
pShaderShadow->EnableTexture( SHADER_SAMPLER1, true );
pShaderShadow->EnableSRGBRead( SHADER_SAMPLER1, bForceSRGBReadsAndWrites );
// Up to 4 (sRGB) color-correction lookup textures are bound to samplers 2-5:
pShaderShadow->EnableTexture( SHADER_SAMPLER2, true );
pShaderShadow->EnableTexture( SHADER_SAMPLER3, true );
pShaderShadow->EnableTexture( SHADER_SAMPLER4, true );
pShaderShadow->EnableTexture( SHADER_SAMPLER5, true );
pShaderShadow->EnableSRGBRead( SHADER_SAMPLER2, false );
pShaderShadow->EnableSRGBRead( SHADER_SAMPLER3, false );
pShaderShadow->EnableSRGBRead( SHADER_SAMPLER4, false );
pShaderShadow->EnableSRGBRead( SHADER_SAMPLER5, false );
int format = VERTEX_POSITION;
int numTexCoords = 1;
int * pTexCoordDimensions = NULL;
int userDataSize = 0;
pShaderShadow->VertexShaderVertexFormat( format, numTexCoords, pTexCoordDimensions, userDataSize );
DECLARE_STATIC_VERTEX_SHADER( screenspaceeffect_vs20 );
SET_STATIC_VERTEX_SHADER( screenspaceeffect_vs20 );
if( g_pHardwareConfig->SupportsPixelShaders_2_b() || g_pHardwareConfig->ShouldAlwaysUseShaderModel2bShaders() ) // GL always goes the ps2b way for this shader, even on "ps20" parts
{
DECLARE_STATIC_PIXEL_SHADER( engine_post_ps20b );
SET_STATIC_PIXEL_SHADER_COMBO( LINEAR_INPUT, bLinearInput );
SET_STATIC_PIXEL_SHADER_COMBO( LINEAR_OUTPUT, bLinearOutput );
SET_STATIC_PIXEL_SHADER( engine_post_ps20b );
}
else
{
DECLARE_STATIC_PIXEL_SHADER( engine_post_ps20 );
SET_STATIC_PIXEL_SHADER( engine_post_ps20 );
}
}
DYNAMIC_STATE
{
BindTexture( SHADER_SAMPLER0, BASETEXTURE, -1 );
// FIXME: need to set FBTEXTURE to be point-sampled (will speed up this shader significantly on 360)
// and assert that it's set to SHADER_TEXWRAPMODE_CLAMP (since the shader will sample offscreen)
BindTexture( SHADER_SAMPLER1, FBTEXTURE, -1 );
ShaderColorCorrectionInfo_t ccInfo;
pShaderAPI->GetCurrentColorCorrection( &ccInfo );
int colCorrectNumLookups = ccInfo.m_nLookupCount;
for( int i = 0; i < colCorrectNumLookups; i++ )
{
pShaderAPI->BindStandardTexture( (Sampler_t)(SHADER_SAMPLER2 + i), (StandardTextureId_t)(TEXTURE_COLOR_CORRECTION_VOLUME_0 + i) );
}
// Upload 1-pixel X&Y offsets [ (+dX,0,+dY,-dX) is chosen to work with the allowed ps20 swizzles ]
// The shader will sample in a cross (up/down/left/right from the current sample), for 5-tap
// (quality 0) mode and add another 4 samples in a diagonal cross, for 9-tap (quality 1) mode
ITexture * pTarget = params[FBTEXTURE]->GetTextureValue();
int width = pTarget->GetActualWidth();
int height = pTarget->GetActualHeight();
float dX = 1.0f / width;
float dY = 1.0f / height;
float offsets[4] = { +dX, 0, +dY, -dX };
pShaderAPI->SetPixelShaderConstant( 0, &offsets[0], 1 );
// Upload AA tweakables:
// x - strength (this can be used to toggle the AA off, or to weaken it where pathological cases are showing)
// y - reduction of 1-pixel-line blurring (blurring of 1-pixel lines causes issues, so it's tunable)
// z - edge threshold multiplier (default 1.0, < 1.0 => more edges softened, > 1.0 => fewer edges softened)
// w - tap offset multiplier (default 1.0, < 1.0 => sharper image, > 1.0 => blurrier image)
float tweakables[4] = { params[ AAINTERNAL1 ]->GetVecValue()[0],
params[ AAINTERNAL1 ]->GetVecValue()[1],
params[ AAINTERNAL3 ]->GetVecValue()[0],
params[ AAINTERNAL3 ]->GetVecValue()[1] };
pShaderAPI->SetPixelShaderConstant( 1, &tweakables[0], 1 );
// Upload AA UV transform (converts bloom texture UVs to framebuffer texture UVs)
// NOTE: we swap the order of the z and w components since 'wz' is an allowed ps20 swizzle, but 'zw' is not:
float uvTrans[4] = { params[ AAINTERNAL2 ]->GetVecValue()[0],
params[ AAINTERNAL2 ]->GetVecValue()[1],
params[ AAINTERNAL2 ]->GetVecValue()[3],
params[ AAINTERNAL2 ]->GetVecValue()[2] };
pShaderAPI->SetPixelShaderConstant( 2, &uvTrans[0], 1 );
// Upload color-correction weights:
pShaderAPI->SetPixelShaderConstant( 3, &ccInfo.m_flDefaultWeight );
pShaderAPI->SetPixelShaderConstant( 4, ccInfo.m_pLookupWeights );
int aaEnabled = ( params[ AAINTERNAL1 ]->GetVecValue()[0] == 0.0f ) ? 0 : 1;
int aaReduceOnePixelLineBlur = ( params[ AAINTERNAL1 ]->GetVecValue()[1] == 0.0f ) ? 0 : 1;
int aaQualityMode = (int)params[ AAINTERNAL1 ]->GetVecValue()[2];
// int aaDebugMode = (int)params[ AAINTERNAL1 ]->GetVecValue()[3];
int bloomEnabled = ( params[ BLOOMENABLE ]->GetIntValue() == 0 ) ? 0 : 1;
int colCorrectEnabled = ccInfo.m_bIsEnabled;
float flBloomFactor = bloomEnabled ? 1.0f : 0.0f;
float bloomConstant[4] = { flBloomFactor, flBloomFactor, flBloomFactor, flBloomFactor };
pShaderAPI->SetPixelShaderConstant( 5, bloomConstant );
if ( !colCorrectEnabled )
{
colCorrectNumLookups = 0;
}
if( g_pHardwareConfig->SupportsPixelShaders_2_b() || g_pHardwareConfig->ShouldAlwaysUseShaderModel2bShaders() ) // GL always goes the ps2b way for this shader, even on "ps20" parts
{
DECLARE_DYNAMIC_PIXEL_SHADER( engine_post_ps20b );
SET_DYNAMIC_PIXEL_SHADER_COMBO( AA_ENABLE, aaEnabled );
SET_DYNAMIC_PIXEL_SHADER_COMBO( AA_QUALITY_MODE, aaQualityMode );
SET_DYNAMIC_PIXEL_SHADER_COMBO( AA_REDUCE_ONE_PIXEL_LINE_BLUR, aaReduceOnePixelLineBlur );
// SET_DYNAMIC_PIXEL_SHADER_COMBO( AA_DEBUG_MODE, aaDebugMode );
SET_DYNAMIC_PIXEL_SHADER_COMBO( COL_CORRECT_NUM_LOOKUPS, colCorrectNumLookups );
SET_DYNAMIC_PIXEL_SHADER( engine_post_ps20b );
}
else
{
DECLARE_DYNAMIC_PIXEL_SHADER( engine_post_ps20 );
SET_DYNAMIC_PIXEL_SHADER_COMBO( AA_ENABLE, aaEnabled );
SET_DYNAMIC_PIXEL_SHADER_COMBO( AA_QUALITY_MODE, 0 ); // Only enough instruction slots in ps2b
SET_DYNAMIC_PIXEL_SHADER_COMBO( AA_REDUCE_ONE_PIXEL_LINE_BLUR, 0 );
// SET_DYNAMIC_PIXEL_SHADER_COMBO( AA_DEBUG_MODE, aaDebugMode );
SET_DYNAMIC_PIXEL_SHADER_COMBO( COL_CORRECT_NUM_LOOKUPS, colCorrectNumLookups );
SET_DYNAMIC_PIXEL_SHADER( engine_post_ps20 );
}
DECLARE_DYNAMIC_VERTEX_SHADER( screenspaceeffect_vs20 );
SET_DYNAMIC_VERTEX_SHADER( screenspaceeffect_vs20 );
}
Draw();
}
END_SHADER