mirror of
https://github.com/hanwckf/immortalwrt-mt798x.git
synced 2025-01-10 11:09:57 +08:00
e4cf25cfab
WPA-EAP supports several phase2 (=inner) authentication methods when using EAP-TTLS, EAP-PEAP or EAP-FAST (the latter is added as a first step towards the UCI model supporting EAP-FAST by this commit) The value of the auth config variable was previously expected to be directly parseable as the content of the 'phase2' option of wpa_supplicant. This exposed wpa_supplicant's internals, leaving it to view-level to set the value properly. Unfortunately, this is currently not the case, as LuCI currently allows values like 'PAP', 'CHAP', 'MSCHAPV2'. Users thus probably diverged and set auth to values like 'auth=MSCHAPV2' as a work-around. This behaviour isn't explicitely documented anywhere and is not quite intuitive... The phase2-string is now generated according to $eap_type and $auth, following the scheme also found in hostap's test-cases: http://w1.fi/cgit/hostap/tree/tests/hwsim/test_ap_eap.py The old behaviour is also still supported for the sake of not breaking existing, working configurations. Examples: eap_type auth 'ttls' 'EAP-MSCHAPV2' -> phase2="autheap=MSCHAPV2" 'ttls' 'MSCHAPV2' -> phase2="auth=MSCHAPV2" 'peap' 'EAP-GTC' -> phase2="auth=GTC" Deprecated syntax supported for compatibility: 'ttls' 'autheap=MSCHAPV2' -> phase2="autheap=MSCHAPV2" I will suggest a patch to LuCI adding EAP-MSCHAPV2, EAP-GTC, ... to the list of Authentication methods available. Signed-off-by: Daniel Golle <daniel@makrotopia.org> SVN-Revision: 48309
This is the buildsystem for the OpenWrt Linux distribution. Please use "make menuconfig" to configure your appreciated configuration for the toolchain and firmware. You need to have installed gcc, binutils, bzip2, flex, python, perl, make, find, grep, diff, unzip, gawk, getopt, subversion, libz-dev and libc headers. Run "./scripts/feeds update -a" to get all the latest package definitions defined in feeds.conf / feeds.conf.default respectively and "./scripts/feeds install -a" to install symlinks of all of them into package/feeds/. Use "make menuconfig" to configure your image. Simply running "make" will build your firmware. It will download all sources, build the cross-compile toolchain, the kernel and all choosen applications. You can use "scripts/flashing/flash.sh" for remotely updating your embedded system via tftp. The OpenWrt system is documented in docs/. You will need a LaTeX distribution and the tex4ht package to build the documentation. Type "make -C docs/" to build it. To build your own firmware you need to have access to a Linux, BSD or MacOSX system (case-sensitive filesystem required). Cygwin will not be supported because of the lack of case sensitiveness in the file system. Sunshine! Your OpenWrt Project http://openwrt.org