mirror of
https://github.com/hanwckf/immortalwrt-mt798x.git
synced 2025-01-09 18:59:13 +08:00
c729fe0269
To work correctly hostapd requires wireless driver to allow interfaces removal. It was working with brcmfmac only partially. Firmware for BCM43602 got some special hack (feature?) that allowed removing all interfaces by disabling mbss mode. It wasn't working with BCM4366 firmware and remaining interfaces were preventing hostapd from starting again. Those patches add support for "interface_remove" firmware method which works with BCM4366 firmware and they make it finally possible to use BCM4366 & brcmfmac & multiple interfaces. Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
This is the buildsystem for the LEDE Linux distribution. Please use "make menuconfig" to choose your preferred configuration for the toolchain and firmware. You need to have installed gcc, binutils, bzip2, flex, python, perl, make, find, grep, diff, unzip, gawk, getopt, subversion, libz-dev and libc headers. Run "./scripts/feeds update -a" to get all the latest package definitions defined in feeds.conf / feeds.conf.default respectively and "./scripts/feeds install -a" to install symlinks of all of them into package/feeds/. Use "make menuconfig" to configure your image. Simply running "make" will build your firmware. It will download all sources, build the cross-compile toolchain, the kernel and all choosen applications. To build your own firmware you need to have access to a Linux, BSD or MacOSX system (case-sensitive filesystem required). Cygwin will not be supported because of the lack of case sensitiveness in the file system. Sunshine! Your LEDE Community http://www.lede-project.org