Tobias Welz 816973f42a ramips: enable flashing WizFi630S via OEM firmware ...

WIZnet WizFi630s board name is written slightly different it its OEM
OpenWrt firmware. This causes an incompatibility warning during flashing
with sysupgrade. This patch is adding the vendor board name to the
supported devices list to avoid this warning. For initial flashing you
can use sysupgrade via command line or luci beside of TFTP.
Do not keep the OEM configuration during sysupgrade.

Signed-off-by: Tobias Welz <tw@wiznet.eu>

2020-08-05 23:08:03 +02:00

..

lzma-loader

ramips: Add support for mt7621 to lzma-loader

2018-06-21 06:54:42 +02:00

common-tp-link.mk

treewide: omit IMAGE_SIZE argument from check-size

2020-03-21 20:02:55 +01:00

Makefile

ramips: consolidate Netgear devices for mt7628

2020-07-13 10:37:22 +02:00

mt76x8.mk

ramips: enable flashing WizFi630S via OEM firmware

2020-08-05 23:08:03 +02:00

mt7620.mk

ramips: consolidate recipes with uimage_padhdr

2020-07-11 18:38:42 +02:00

mt7621.mk

ramips: add support for D-Link DIR-1960 A1

2020-07-27 12:37:07 +02:00

rt288x.mk

ramips: tidy up image subtarget Makefiles

2020-05-08 18:58:39 +02:00

rt305x.mk

ramips: add support for ZyXEL Keenetic Lite Rev.B

2020-07-08 22:52:40 +02:00

rt3883.mk

ramips: tidy up image subtarget Makefiles

2020-05-08 18:58:39 +02:00