mirror of
https://github.com/hanwckf/immortalwrt-mt798x.git
synced 2025-01-08 10:23:47 +08:00
98fb380d88
d02a05b mt7603: update firmware to version 20160107100755 4d4cd05 Partially revert "mt7603: use mcu command to set timing registers, fix OFDM timeout values" 170f334 mt76x2: remove MAC address limitation for multi-vif setups 3563b8f mt76x2: clean up MAC/BSSID address initialization 9de77e1 mt76x2: drop wiphy->addresses a6a6e25 mt76x2: init: disable APCLI by default c64633e mt76x2: configure rx filter based on monitor mode setting ac815fa mt76x2: init: fix rx filter default value during init e504656 mt7603: configure other-unicast drop based on monitor mode setting Signed-off-by: Felix Fietkau <nbd@nbd.name>
This is the buildsystem for the LEDE Linux distribution. Please use "make menuconfig" to choose your preferred configuration for the toolchain and firmware. You need to have installed gcc, binutils, bzip2, flex, python, perl, make, find, grep, diff, unzip, gawk, getopt, subversion, libz-dev and libc headers. Run "./scripts/feeds update -a" to get all the latest package definitions defined in feeds.conf / feeds.conf.default respectively and "./scripts/feeds install -a" to install symlinks of all of them into package/feeds/. Use "make menuconfig" to configure your image. Simply running "make" will build your firmware. It will download all sources, build the cross-compile toolchain, the kernel and all choosen applications. To build your own firmware you need to have access to a Linux, BSD or MacOSX system (case-sensitive filesystem required). Cygwin will not be supported because of the lack of case sensitiveness in the file system. Sunshine! Your LEDE Community http://www.lede-project.org