Petr Štetiar 8743a9c9b9 sunxi: 5.4: a64-olinuxino: use red LED for status signalization ...

There is a red LED marked as `GPIO_LED1` on the silkscreen and connected
to PE17, so use this LED for status signalization.

Signed-off-by: Petr Štetiar <ynezz@true.cz>

2020-03-28 13:03:02 +01:00

..

301-orangepi_pc2_usb_otg_to_host_key_power.patch

sunxi: copy config and patches from 4.19 to 5.4

2020-03-16 22:21:45 +01:00

310-Revert-ARM-dts-sun7i-Add-BCM53125-switch-nodes-to-th.patch

sunxi: make patches apply cleanly on 5.4

2020-03-16 22:21:45 +01:00

400-arm64-allwinner-a64-sopine-Add-Sopine-flash-partitio.patch

sunxi: make patches apply cleanly on 5.4

2020-03-16 22:21:45 +01:00

420-v5.7-arm64-dts-allwinner-a64-olinuxino-add-user-red-LED.patch

sunxi: 5.4: a64-olinuxino: use red LED for status signalization

2020-03-28 13:03:02 +01:00

430-arm64-dts-allwinner-a64-olinuxino-add-status-LED-ali.patch

sunxi: 5.4: a64-olinuxino: use red LED for status signalization

2020-03-28 13:03:02 +01:00