mirror of
https://github.com/hanwckf/immortalwrt-mt798x.git
synced 2025-01-10 03:09:08 +08:00
525d86686e
Update the init scripts have to use udevadm where appropriate. The udev package no longer provides separate udev utilities like udevtrigger and udevsettle. These have been incorporated into the udev admin program udevadm. Replace the udevextras sub package with config options to the udev package. Update the preinit script to check for '/lib/udev/devices', and copy it to '/dev/ if it is found, then to conditionaly setup /dev the old way with mknod etc. Udev now recommends using the directory '/lib/udev/devices' to initialize the '/dev' directory at startup. Signed-off-by: Geoff Levand <geoffrey.levand@am.sony.com> SVN-Revision: 17378
This is the buildsystem for the OpenWrt Linux distribution Please use "make menuconfig" to configure your appreciated configuration for the toolchain and firmware. You need to have installed gcc, binutils, patch, bzip2, flex, bison, make, gettext, pkg-config, unzip, libz-dev and libc headers. Simply running 'make' will build your firmware. It will download all sources, build the cross-compile toolchain, the kernel and all choosen applications. You can use scripts/flashing/flash.sh for remotely updating your embedded system via tftp. The OpenWrt system is documented in docs/. You will need a LaTeX distribution and the tex4ht package to build the documentation. Type make -C docs/ to build it. Building your own firmware you need to have access to a Linux, BSD or MacOSX system. Cygwin will not be supported because of the lack of case sensitiveness. Sunshine! Your OpenWrt Project http://openwrt.org