mirror of
https://github.com/hanwckf/immortalwrt-mt798x.git
synced 2025-01-10 11:09:57 +08:00
460640b6d7
r46861 introduced a new option eapol_version to hostapd, but did not provide a default value. When the option value is evaluated, the non-existing value causes errors to the systen log: "netifd: radio0: sh: out of range" Add a no-op default value 0 for eapol_version. Only values 1 or 2 are actually passed on, so 0 will not change the default action in hostapd. Signed-off-by: Hannu Nyman <hannu.nyman@iki.fi> SVN-Revision: 47361
This is the buildsystem for the OpenWrt Linux distribution. Please use "make menuconfig" to configure your appreciated configuration for the toolchain and firmware. You need to have installed gcc, binutils, bzip2, flex, python, perl, make, find, grep, diff, unzip, gawk, getopt, subversion, libz-dev and libc headers. Run "./scripts/feeds update -a" to get all the latest package definitions defined in feeds.conf / feeds.conf.default respectively and "./scripts/feeds install -a" to install symlinks of all of them into package/feeds/. Use "make menuconfig" to configure your image. Simply running "make" will build your firmware. It will download all sources, build the cross-compile toolchain, the kernel and all choosen applications. You can use "scripts/flashing/flash.sh" for remotely updating your embedded system via tftp. The OpenWrt system is documented in docs/. You will need a LaTeX distribution and the tex4ht package to build the documentation. Type "make -C docs/" to build it. To build your own firmware you need to have access to a Linux, BSD or MacOSX system (case-sensitive filesystem required). Cygwin will not be supported because of the lack of case sensitiveness in the file system. Sunshine! Your OpenWrt Project http://openwrt.org