mirror of
https://github.com/hanwckf/immortalwrt-mt798x.git
synced 2025-01-09 18:59:13 +08:00
43ae50978a
https://patchwork.kernel.org/patch/11224189/ -- On 2019-10-28 06:07, wbob wrote: > Hello Roman, > > while reading around drivers/net/wireless/ralink/rt2x00/rt2800lib.c > I stumbled on what I think is an edit of yours made in error in march > 2017: > > https://github.com/torvalds/linux/commit/41977e86#diff-dae5dc10da180f3b055809a48118e18aR5281 > > RT6352 in line 5281 should not have been introduced as the "else if" > below line 5291 can then not take effect for a RT6352 device. Another > possibility is for line 5291 to be not for RT6352, but this seems > very unlikely. Are you able to clarify still after this substantial time? > > 5277: static int rt2800_init_registers(struct rt2x00_dev *rt2x00dev) > ... > 5279: } else if (rt2x00_rt(rt2x00dev, RT5390) || > 5280: rt2x00_rt(rt2x00dev, RT5392) || > 5281: rt2x00_rt(rt2x00dev, RT6352)) { > ... > 5291: } else if (rt2x00_rt(rt2x00dev, RT6352)) { > ... Hence remove errornous line 5281 to make the driver actually execute the correct initialization routine for MT7620 chips. As it was requested by Stanislaw Gruszka remove setting values of MIMO_PS_CFG and TX_PIN_CFG. MIMO_PS_CFG is responsible for MIMO power-safe mode (which is disabled), hence we can drop setting it. TX_PIN_CFG is set correctly in other functions, and as setting this value breaks some devices, rather don't set it here during init, but only modify it later on. Fixes: 41977e86c984 ("rt2x00: add support for MT7620") Reported-by: wbob <wbob@jify.de> Reported-by: Roman Yeryomin <roman@advem.lv> Signed-off-by: Daniel Golle <daniel@makrotopia.org> Acked-by: Stanislaw Gruszka <sgruszka@redhat.com> -- Signed-off-by: Daniel Golle <daniel@makrotopia.org>
_______ ________ __
| |.-----.-----.-----.| | | |.----.| |_
| - || _ | -__| || | | || _|| _|
|_______|| __|_____|__|__||________||__| |____|
|__| W I R E L E S S F R E E D O M
-----------------------------------------------------
This is the buildsystem for the OpenWrt Linux distribution.
To build your own firmware you need a Linux, BSD or MacOSX system (case
sensitive filesystem required). Cygwin is unsupported because of the lack
of a case sensitive file system.
You need gcc, binutils, bzip2, flex, python3.5+, perl, make, find, grep, diff,
unzip, gawk, getopt, subversion, libz-dev and libc headers installed.
1. Run "./scripts/feeds update -a" to obtain all the latest package definitions
defined in feeds.conf / feeds.conf.default
2. Run "./scripts/feeds install -a" to install symlinks for all obtained
packages into package/feeds/
3. Run "make menuconfig" to select your preferred configuration for the
toolchain, target system & firmware packages.
4. Run "make" to build your firmware. This will download all sources, build
the cross-compile toolchain and then cross-compile the Linux kernel & all
chosen applications for your target system.
Sunshine!
Your OpenWrt Community
http://www.openwrt.org