mirror of
https://github.com/hanwckf/immortalwrt-mt798x.git
synced 2025-01-10 19:12:33 +08:00
350dd0f9ac
By default kobs-ng will use the size of /dev/mtd0 for the IMX bootstreams. This patch allows overriding that size in order to reserve space at the end of the mtd partition for u-boot.img in the case of using an SPL bootloader. For example, to flash an SPL bootloader that loads u-boot.img from 0xe0000 (14MB) offset in a 16MB /dev/mtd0: kobs-ng init -v -x --search_exponent=1 --chip_0_size=0xe00000 SPL nandwrite --start=0xe00000 --pad /dev/mtd0 u-boot.img Signed-off-by: Tim Harvey <tharvey@gateworks.com> SVN-Revision: 40532
This is the buildsystem for the OpenWrt Linux distribution. Please use "make menuconfig" to configure your appreciated configuration for the toolchain and firmware. You need to have installed gcc, binutils, bzip2, flex, python, perl make, find, grep, diff, unzip, gawk, getopt, libz-dev and libc headers. Run "./scripts/feeds update -a" to get all the latest package definitions defined in feeds.conf / feeds.conf.default respectively and "./scripts/feeds install -a" to install symlinks of all of them into package/feeds/. Use "make menuconfig" to configure your image. Simply running "make" will build your firmware. It will download all sources, build the cross-compile toolchain, the kernel and all choosen applications. You can use "scripts/flashing/flash.sh" for remotely updating your embedded system via tftp. The OpenWrt system is documented in docs/. You will need a LaTeX distribution and the tex4ht package to build the documentation. Type "make -C docs/" to build it. To build your own firmware you need to have access to a Linux, BSD or MacOSX system (case-sensitive filesystem required). Cygwin will not be supported because of the lack of case sensitiveness in the file system. Sunshine! Your OpenWrt Project http://openwrt.org