Daniel Dickinson 44e22cbd49 Fixed Comtrend CT536_CT5621 board settings. These boards are based on the 96348GW-11 reference design but have different GPIOs therefore we use the board fixups now availabed (thanks the patches by Jonas Gorski) to create a separate board entry for these boards and leave the reference design with reference GPIOs. Also these boards only have enet1 (no enet0) so we set that in the board definition, and use a defconfig for a single interface network. ...

SVN-Revision: 24442

2010-12-10 18:59:58 +00:00

..

base-files

Fixed Comtrend CT536_CT5621 board settings. These boards are based on the 96348GW-11 reference design but have different GPIOs therefore we use the board fixups now availabed (thanks the patches by Jonas Gorski) to create a separate board entry for these boards and leave the reference design with reference GPIOs. Also these boards only have enet1 (no enet0) so we set that in the board definition, and use a defconfig for a single interface network.

2010-12-10 18:59:58 +00:00

files/arch/mips/include/asm/mach-bcm63xx

tools/firmware-utils/imagetag: Fixed Pirelli Alice Gate CRC calculation in imagetag (was invalid strings in bcm_tag.h). Closes #7120

2010-04-14 00:45:48 +00:00

image

Fixed Comtrend CT536_CT5621 board settings. These boards are based on the 96348GW-11 reference design but have different GPIOs therefore we use the board fixups now availabed (thanks the patches by Jonas Gorski) to create a separate board entry for these boards and leave the reference design with reference GPIOs. Also these boards only have enet1 (no enet0) so we set that in the board definition, and use a defconfig for a single interface network.

2010-12-10 18:59:58 +00:00

patches-2.6.35

Fixed Comtrend CT536_CT5621 board settings. These boards are based on the 96348GW-11 reference design but have different GPIOs therefore we use the board fixups now availabed (thanks the patches by Jonas Gorski) to create a separate board entry for these boards and leave the reference design with reference GPIOs. Also these boards only have enet1 (no enet0) so we set that in the board definition, and use a defconfig for a single interface network.

2010-12-10 18:59:58 +00:00

profiles

Profiles: GW6X00: Replace ext2 module with ext4 as ext2 and 3 are going away. Remove kmod-loop as the need for it has been superseded by block-extroot, and remove kmod-fs-vfat as it takes space and is rarely needed.

2010-12-08 00:40:31 +00:00

base-files.mk

bcm63xx: Add defconfigs.

2010-11-28 22:04:19 +00:00

config-2.6.35

restore kernel oldconfig

2010-10-17 14:09:24 +00:00

Makefile

Profiles: Make buttons and led modules included by default so that failsafe will work in the case of builds for releases.

2010-12-08 00:40:28 +00:00

modules.mk

massive: replace occurences of .$(LINUX_KMOD_SUFFIX) with .ko after r21950

2010-07-12 14:06:13 +00:00