David Bauer 1e06482f7d mtd: add logic for TP-Link ramips recovery magic
This adds an option to set the recovery flag of newer TP-Link MediaTek
boards and remove it after a successful write.

To make use of this feature, add the '-t' option to mtd-write.

The '-t' option takes the mtd partition containing the recovery flag
(usually 'romfile') as an argument. Make sure this partition is not
flagged as read-only!

Example:
 > mtd -t romfile write owrt.bin firmware

This command writes the recovery-flag before it begins writing the image
to the firmware partition. After the image-write has been successful,
the recovery flag is removed.

This way, the TP-Link web-recovery is automatically enabled on an
unsucessful flash (e.g. power loss).

This option is only available if the mtd package is compiled for the
ramips target.

Signed-off-by: David Bauer <mail@david-bauer.net>
2019-01-26 21:46:32 +01:00
2019-01-22 12:08:03 +01:00
2007-02-26 01:05:09 +00:00
2016-03-20 17:29:15 +01:00
2018-08-25 11:10:28 +02:00
2018-07-08 12:05:16 +01:00
2019-01-22 13:29:46 +01:00

  _______                     ________        __
 |       |.-----.-----.-----.|  |  |  |.----.|  |_
 |   -   ||  _  |  -__|     ||  |  |  ||   _||   _|
 |_______||   __|_____|__|__||________||__|  |____|
          |__| W I R E L E S S   F R E E D O M
 -----------------------------------------------------

This is the buildsystem for the OpenWrt Linux distribution.

To build your own firmware you need a Linux, BSD or MacOSX system (case
sensitive filesystem required). Cygwin is unsupported because of the lack
of a case sensitive file system.

You need gcc, binutils, bzip2, flex, python, perl, make, find, grep, diff,
unzip, gawk, getopt, subversion, libz-dev and libc headers installed.

1. Run "./scripts/feeds update -a" to obtain all the latest package definitions
defined in feeds.conf / feeds.conf.default

2. Run "./scripts/feeds install -a" to install symlinks for all obtained
packages into package/feeds/

3. Run "make menuconfig" to select your preferred configuration for the
toolchain, target system & firmware packages.

4. Run "make" to build your firmware. This will download all sources, build
the cross-compile toolchain and then cross-compile the Linux kernel & all
chosen applications for your target system.

Sunshine!
	Your OpenWrt Community
	http://www.openwrt.org


Description
An Immortalwrt variant fot mediatek mt798x routers.
Readme
Languages
C 70%
Makefile 12.4%
Shell 6%
Roff 3.9%
Perl 2%
Other 5.6%