Perry Melange 796ad2f7ef ath79: add support for D-Link DIR-842 C3 ...

Hardware spec of DIR-842 C3:
SoC: QCA9563
DRAM: 128MB DDR2
Flash: 16MB SPI-NOR
Switch: QCA8337N
WiFi 5.8GHz: QCA9888
WiFi 2.4Ghz: QCA9563
USB: circuit onboard, but components are not soldered

Flash instructions:

1. Upgrade the factory.bin through the factory web interface or
   the u-boot failsafe interface.
   The firmware will boot up correctly for the first time.
   Do not power off the device after OpenWrt has booted.
   Otherwise the u-boot will enter failsafe mode as the checksum
   of the firmware has been changed.
2. Upgrade the sysupgrade.bin in OpenWrt.
   After upgrading completes the u-boot won't complain about the
   firmware checksum and it's OK to use now.
3. If you powered off the device before upgrading the sysupgrade.bin,
   just upgrade the factory.bin through the u-boot failsafe interface
   and then goto step 2.

Signed-off-by: Perry Melange <isprotejesvalkata@gmail.com>

2019-08-07 21:17:40 +02:00

..

imagebuilder

imagebuilder: new DISABLED_SERVICES make variable

2019-05-15 13:34:24 +02:00

linux

ath79: add support for D-Link DIR-842 C3

2019-08-07 21:17:40 +02:00

sdk

sdk: Fix cryptodev-linux build when CONFIG_ARM64_MODULE_PLTS=y

2019-08-04 22:09:20 +02:00

toolchain

target/toolchain/files/wrapper.sh: simplify 'case'

2019-07-15 19:29:08 +02:00

Config.in

build: add a config option for enabling a testing version of the target kernel

2019-05-11 11:37:10 +02:00

Makefile

build: make <subdir>/install opt-in, use it for target/ only

2017-02-09 13:51:35 +01:00