Backups/immortalwrt-mt798x
1
0
Fork 0
mirror of https://github.com/hanwckf/immortalwrt-mt798x.git synced 2025-01-09 02:43:53 +08:00
Code Issues Actions Packages Projects Releases Wiki Activity
immortalwrt-mt798x/package/network/services/hostapd/Makefile
David Bauer 18cf41172c
hostapd: update to 2022-07-29 
b704dc72e tests: sigma_dut and updated ConfResult value for Configurator failures
89de431f2 DPP: Add config response status value to DPP-CONF-SENT
10104915a tests: sigma_dut and DPP PB session overlap
80d5e264c Enhance QCA vendor roam event to indicate MLO links after reassociation
662249306 Update copyright notices for the QCA vendor definitions
8adcdd659 tests: Temporary workaround for dpp_chirp_ap_5g
ddcd15c2d tests: Fix fuzzing/sae build
7fa67861a tests: Fix p2p_channel_avoid3
ee3567d65 tests: Add more time for scan/connection
1d08b238c nl80211: Allow more time for the initial scan with 6 GHz
ac9e6a2ab tests: Allow 6 GHz opclasses in MBO checks
faf9c04cb Remove a host of unnecessary OPENSSL_IS_BORINGSSL ifdefs
b9cd5a82f Always process pending QCA_NL80211_VENDOR_SUBCMD_KEY_MGMT_ROAM_AUTH data
ef4cd8e33 QoS: Use common classifier_mask for ipv4/ipv6
93be02592 Add fixed FDD mode to qca_btc_chain_mode QCA vendor attribute
e7cbfa1c1 tests: sigma_dut and DPP Enrollee unsupported curves
5565fbee2 DPP: Check Enrollee supported curves when building Config Response
ceae05cec tests: sigma_dut and DPP MUDURL setting for hostapd
4cfb484e9 DPP: Allow dpp_controller_start without arguments in CLIs
c97000933 Fix ifdef condition for imsi_privacy_cert
2a9a61d6c tests: SAE with extended key AKM
e35f6ed1d tests: More detailed report on SAE PMKSA caching error case
f70db167a SAE: Derive a variable length PMK with the new AKM suites
91010e6f6 SAE: Indicate AKM suite selector in commit for new AKM suites
e81ec0962 SAE: Use H2E unconditionally with the new AKM suites
f8eed2e8b SAE: Store PMK length and AKM in SAE data
9dc4e9d13 SAE: EAPOL-Key and key/MIC length information for the new AKM suites
a32ef3cfb SAE: Driver capability flags for the new SAE AKM suites
91df8c9c6 SAE: Internal WPA_KEY_MGMT_* defines for extended key AKMs
5c8a714b1 SAE: Use wpa_key_mgmt_sae() helper
5456b0f26 Define new RSN AKM suite selector values
def33101c DPP: Clear push button announcement state on wpa_supplicant FLUSH
35587fa8f tests: DPP Controller/Relay with need to discover Controller
d22dfe918 DPP: Event message for indicating when Relay would need a Controller
ca7892e98 tests: DPP Relay and adding/removing connection to a Controller
bfe3cfc38 DPP: Allow Relay connections to Controllers to be added and removed
808834b18 Add a comparison function for hostapd_ip_addr
f7763880b DPP: Advertise Configurator connectivity on Relay automatically
ff7cc1d49 tests: DPP Relay and dynamic Controller addition
ca682f80a DPP: Dynamic Controller initiated connection on Relay
d2388bcca DPP: Strict validation of PKEX peer bootstrapping key during auth
a7b8cef8b DPP3: Fix push button boostrapping key passing through PKEX
69d7c8e6b DPP: Add peer=id entry for PKEX-over-TCP case
b607d2723 tests: sigma_dut and DPP PB Configurator in wpa_supplicant
1ff9251a8 DPP3: Push button Configurator in wpa_supplicant
b94e46bc7 tests: PB Configurator in wpa_supplicant
ca4e82cbf tests: sigma_dut DPP/PKEX initiator as Configurator over TCP and Wi-Fi
e9137950f DPP: Recognize own PKEX Exchange Request if it ends up being received
692956446 DPP: Note PKEX code/identifier deletion in debug log
dfa9183b1 tests: DPP reconfig after Controller-initiated operation through Relay
ae4a3a6f6 DPP: Add DPP-CONF-REQ-RX event for Controller
17216b524 tests: sigma_dut DPP/PKEX initiator as Configurator (TCP) through Relay
fb2937b85 DPP: Allow Controller to initiate PKEX through Relay
15af83cf1 DPP: Delete PKEX code and identifier on success completion of PKEX
d86ed5b72 tests: Allow DPP_PKEX_REMOVE success in dpp_pkex_hostapd_errors
0a4f391b1 tests: sigma_dut and DPP Connector Privacy
479e412a6 DPP3: Default value for dpp_connector_privacy
7d12871ba test: DPP Private Peer Introduction protocol
148de3e0d DPP3: Private Peer Introduction protocol
786ea402b HPKE base mode with single-shot API
f0273bc81 OpenSSL: Remove a forgotten debug print
f2bb0839f test: DPP 3rd party config information
68209ddbe DPP: Allow 3rd party information to be added into config object
0e2217c95 DPP: Allow 3rd party information to be added into config request obj
3d82fbe05 Add QCA vendor subcommand and attributes for SCS rule configuration
16b62ddfa QCA vendor attribute for DBAM configuration
004b1ff47 tests: DPP Controller initiating through Relay
451ede2c3 DPP: Allow AP/Relay to be configured to listed for new TCP connections
248654d36 tests: sigma_dut DPP PB test cases
697b7d7ec tests: DPP push button
7bbe85987 DPP3: Allow external configuration to be specified on AP for PB
8db786a43 DPP3: Testing functionality for push button announcements
37bccfcab DPP3: Push button bootstrap mechanism
a0054fe7c Add AP and STA specific P802.11az security capabilities (vendor command)
159e63613 QCA vendor command for CoAP offload processing
3b7bb17f6 Add QCA vendor attribute for TIM beacon statistics
09a281e52 Add QCA vendor interface for PASN offload to userspace
809fb96fa Add a vendor attribute to configure concurrency policy for AP interface
a5754f531 Rename QCA_NL80211_VENDOR_SUBCMD_CONCURRENT_MULTI_STA_POLICY
085a3fc76 EHT: Add 320 channel width support
bafe35df0 Move CHANWIDTH_* definitions from ieee80211_defs.h to defs.h
92f549901 tests: Remove the 80+80 vs. 160 part from wpa2_ocv_ap_vht160_mismatch
c580c2aec tests: Make OCV negative test error cases more robust
3c2ba98ad Add QCA vendor event to indicate driver recovery after internal failures
6b461f68c Set current_ssid before changing state to ASSOCIATING
8dd826741 QCA vendor attribute to configure direct data path for audio traffic
504be2f9d QCA vendor command support to get WLAN radio combinations
d5905dbc8 OCV: Check the Frequency Segment 1 Channel Number only on 80+80 MHz

Signed-off-by: David Bauer <mail@david-bauer.net>
(cherry picked from commit 94037ab6b03141de2c2c7c66ca76435044fc30a4)
2022-09-27 17:13:47 +08:00

719 lines
21 KiB
Makefile
Raw Permalink Blame History

# SPDX-License-Identifier: GPL-2.0-only
#
# Copyright (C) 2006-2021 OpenWrt.org
include $(TOPDIR)/rules.mk
PKG_NAME:=hostapd
PKG_RELEASE:=$(AUTORELEASE)
PKG_SOURCE_URL:=http://w1.fi/hostap.git
PKG_SOURCE_PROTO:=git
PKG_SOURCE_DATE:=2022-07-29
PKG_SOURCE_VERSION:=b704dc72ef824dfdd96674b90179b274d1d38105
PKG_MIRROR_HASH:=6c9dd359ef5a4595b6576e07928566d6864957c4af6466d641d6c3f7717f4689
PKG_MAINTAINER:=Felix Fietkau <nbd@nbd.name>
PKG_LICENSE:=BSD-3-Clause
PKG_CPE_ID:=cpe:/a:w1.fi:hostapd
PKG_BUILD_PARALLEL:=1
PKG_ASLR_PIE_REGULAR:=1
PKG_CONFIG_DEPENDS:= \
CONFIG_PACKAGE_kmod-ath9k \
CONFIG_PACKAGE_kmod-cfg80211 \
CONFIG_PACKAGE_hostapd \
CONFIG_PACKAGE_hostapd-basic \
CONFIG_PACKAGE_hostapd-mini \
CONFIG_WPA_RFKILL_SUPPORT \
CONFIG_DRIVER_WEXT_SUPPORT \
CONFIG_DRIVER_11N_SUPPORT \
CONFIG_DRIVER_11AC_SUPPORT \
CONFIG_DRIVER_11AX_SUPPORT \
CONFIG_WPA_ENABLE_WEP
EAPOL_TEST_PROVIDERS:=eapol-test eapol-test-openssl eapol-test-wolfssl
SUPPLICANT_PROVIDERS:=
HOSTAPD_PROVIDERS:=
LOCAL_TYPE=$(strip \
$(if $(findstring wpad,$(BUILD_VARIANT)),wpad, \
$(if $(findstring supplicant,$(BUILD_VARIANT)),supplicant, \
hostapd \
)))
LOCAL_AND_LIB_VARIANT=$(patsubst hostapd-%,%,\
$(patsubst wpad-%,%,\
$(patsubst supplicant-%,%,\
$(BUILD_VARIANT)\
)))
LOCAL_VARIANT=$(patsubst %-internal,%,\
$(patsubst %-openssl,%,\
$(patsubst %-wolfssl,%,\
$(LOCAL_AND_LIB_VARIANT)\
)))
SSL_VARIANT=$(strip \
$(if $(findstring openssl,$(LOCAL_AND_LIB_VARIANT)),openssl,\
$(if $(findstring wolfssl,$(LOCAL_AND_LIB_VARIANT)),wolfssl,\
internal\
)))
CONFIG_VARIANT:=$(LOCAL_VARIANT)
ifeq ($(LOCAL_VARIANT),mesh)
CONFIG_VARIANT:=full
endif
include $(INCLUDE_DIR)/package.mk
STAMP_CONFIGURED:=$(STAMP_CONFIGURED)_$(CONFIG_WPA_MSG_MIN_PRIORITY)
ifneq ($(CONFIG_DRIVER_11N_SUPPORT),)
HOSTAPD_IEEE80211N:=y
endif
ifneq ($(CONFIG_DRIVER_11AC_SUPPORT),)
HOSTAPD_IEEE80211AC:=y
endif
ifneq ($(CONFIG_DRIVER_11AX_SUPPORT),)
HOSTAPD_IEEE80211AX:=y
endif
DRIVER_MAKEOPTS= \
CONFIG_ACS=$(CONFIG_PACKAGE_kmod-cfg80211) \
CONFIG_DRIVER_NL80211=$(CONFIG_PACKAGE_kmod-cfg80211) \
CONFIG_IEEE80211N=$(HOSTAPD_IEEE80211N) \
CONFIG_IEEE80211AC=$(HOSTAPD_IEEE80211AC) \
CONFIG_IEEE80211AX=$(HOSTAPD_IEEE80211AX) \
CONFIG_DRIVER_WEXT=$(CONFIG_DRIVER_WEXT_SUPPORT) \
CONFIG_MBO=$(CONFIG_WPA_MBO_SUPPORT)
ifeq ($(SSL_VARIANT),openssl)
DRIVER_MAKEOPTS += CONFIG_TLS=openssl CONFIG_SAE=y
TARGET_LDFLAGS += -lcrypto -lssl
ifeq ($(LOCAL_VARIANT),basic)
DRIVER_MAKEOPTS += CONFIG_OWE=y
endif
ifeq ($(LOCAL_VARIANT),mesh)
DRIVER_MAKEOPTS += CONFIG_AP=y CONFIG_MESH=y
endif
ifeq ($(LOCAL_VARIANT),full)
DRIVER_MAKEOPTS += CONFIG_OWE=y CONFIG_SUITEB192=y CONFIG_AP=y CONFIG_MESH=y
endif
endif
ifeq ($(SSL_VARIANT),wolfssl)
DRIVER_MAKEOPTS += CONFIG_TLS=wolfssl CONFIG_SAE=y
TARGET_LDFLAGS += -lwolfssl
ifeq ($(LOCAL_VARIANT),basic)
DRIVER_MAKEOPTS += CONFIG_OWE=y
endif
ifeq ($(LOCAL_VARIANT),mesh)
DRIVER_MAKEOPTS += CONFIG_AP=y CONFIG_MESH=y CONFIG_WPS_NFC=1
endif
ifeq ($(LOCAL_VARIANT),full)
DRIVER_MAKEOPTS += CONFIG_OWE=y CONFIG_SUITEB192=y CONFIG_AP=y CONFIG_MESH=y CONFIG_WPS_NFC=1
endif
endif
ifneq ($(LOCAL_TYPE),hostapd)
ifdef CONFIG_WPA_RFKILL_SUPPORT
DRIVER_MAKEOPTS += NEED_RFKILL=y
endif
endif
ifdef CONFIG_USE_GLIBC
TARGET_LDFLAGS += -lrt
TARGET_LDFLAGS_C += -lrt
endif
DRV_DEPENDS:=+PACKAGE_kmod-cfg80211:libnl-tiny
define Package/hostapd/Default
SECTION:=net
CATEGORY:=Network
SUBMENU:=WirelessAPD
TITLE:=IEEE 802.1x Authenticator
URL:=http://hostap.epitest.fi/
DEPENDS:=$(DRV_DEPENDS) +hostapd-common +libubus
EXTRA_DEPENDS:=hostapd-common (=$(PKG_VERSION)-$(PKG_RELEASE))
USERID:=network=101:network=101
PROVIDES:=hostapd
CONFLICTS:=$(HOSTAPD_PROVIDERS)
HOSTAPD_PROVIDERS+=$(1)
endef
define Package/hostapd
$(call Package/hostapd/Default,$(1))
TITLE+= (built-in full)
VARIANT:=full-internal
endef
define Package/hostapd/description
This package contains a full featured IEEE 802.1x/WPA/EAP/RADIUS
Authenticator.
endef
define Package/hostapd-openssl
$(call Package/hostapd/Default,$(1))
TITLE+= (OpenSSL full)
VARIANT:=full-openssl
DEPENDS+=+PACKAGE_hostapd-openssl:libopenssl
endef
Package/hostapd-openssl/description = $(Package/hostapd/description)
define Package/hostapd-wolfssl
$(call Package/hostapd/Default,$(1))
TITLE+= (wolfSSL full)
VARIANT:=full-wolfssl
DEPENDS+=+PACKAGE_hostapd-wolfssl:libwolfssl
endef
Package/hostapd-wolfssl/description = $(Package/hostapd/description)
define Package/hostapd-basic
$(call Package/hostapd/Default,$(1))
TITLE+= (WPA-PSK, 11r, 11w)
VARIANT:=basic
endef
define Package/hostapd-basic/description
This package contains a basic IEEE 802.1x/WPA Authenticator with WPA-PSK, 802.11r and 802.11w support.
endef
define Package/hostapd-basic-openssl
$(call Package/hostapd/Default,$(1))
TITLE+= (WPA-PSK, 11r and 11w)
VARIANT:=basic-openssl
DEPENDS+=+PACKAGE_hostapd-basic-openssl:libopenssl
endef
define Package/hostapd-basic-openssl/description
This package contains a basic IEEE 802.1x/WPA Authenticator with WPA-PSK, 802.11r and 802.11w support.
endef
define Package/hostapd-basic-wolfssl
$(call Package/hostapd/Default,$(1))
TITLE+= (WPA-PSK, 11r and 11w)
VARIANT:=basic-wolfssl
DEPENDS+=+PACKAGE_hostapd-basic-wolfssl:libwolfssl
endef
define Package/hostapd-basic-wolfssl/description
This package contains a basic IEEE 802.1x/WPA Authenticator with WPA-PSK, 802.11r and 802.11w support.
endef
define Package/hostapd-mini
$(call Package/hostapd/Default,$(1))
TITLE+= (WPA-PSK only)
VARIANT:=mini
endef
define Package/hostapd-mini/description
This package contains a minimal IEEE 802.1x/WPA Authenticator (WPA-PSK only).
endef
define Package/wpad/Default
SECTION:=net
CATEGORY:=Network
SUBMENU:=WirelessAPD
TITLE:=IEEE 802.1x Auth/Supplicant
DEPENDS:=$(DRV_DEPENDS) +hostapd-common +libubus
EXTRA_DEPENDS:=hostapd-common (=$(PKG_VERSION)-$(PKG_RELEASE))
USERID:=network=101:network=101
URL:=http://hostap.epitest.fi/
PROVIDES:=hostapd wpa-supplicant
CONFLICTS:=$(HOSTAPD_PROVIDERS) $(SUPPLICANT_PROVIDERS)
HOSTAPD_PROVIDERS+=$(1)
SUPPLICANT_PROVIDERS+=$(1)
endef
define Package/wpad
$(call Package/wpad/Default,$(1))
TITLE+= (built-in full)
VARIANT:=wpad-full-internal
endef
define Package/wpad/description
This package contains a full featured IEEE 802.1x/WPA/EAP/RADIUS
Authenticator and Supplicant
endef
define Package/wpad-openssl
$(call Package/wpad/Default,$(1))
TITLE+= (OpenSSL full)
VARIANT:=wpad-full-openssl
DEPENDS+=+PACKAGE_wpad-openssl:libopenssl
endef
Package/wpad-openssl/description = $(Package/wpad/description)
define Package/wpad-wolfssl
$(call Package/wpad/Default,$(1))
TITLE+= (wolfSSL full)
VARIANT:=wpad-full-wolfssl
DEPENDS+=+PACKAGE_wpad-wolfssl:libwolfssl
endef
Package/wpad-wolfssl/description = $(Package/wpad/description)
define Package/wpad-basic
$(call Package/wpad/Default,$(1))
TITLE+= (WPA-PSK, 11r, 11w)
VARIANT:=wpad-basic
endef
define Package/wpad-basic/description
This package contains a basic IEEE 802.1x/WPA Authenticator and Supplicant with WPA-PSK, 802.11r and 802.11w support.
endef
define Package/wpad-basic-openssl
$(call Package/wpad/Default,$(1))
TITLE+= (OpenSSL, 11r, 11w)
VARIANT:=wpad-basic-openssl
DEPENDS+=+PACKAGE_wpad-basic-openssl:libopenssl
endef
define Package/wpad-basic-openssl/description
This package contains a basic IEEE 802.1x/WPA Authenticator and Supplicant with WPA-PSK, SAE (WPA3-Personal), 802.11r and 802.11w support.
endef
define Package/wpad-basic-wolfssl
$(call Package/wpad/Default,$(1))
TITLE+= (wolfSSL, 11r, 11w)
VARIANT:=wpad-basic-wolfssl
DEPENDS+=+PACKAGE_wpad-basic-wolfssl:libwolfssl
endef
define Package/wpad-basic-wolfssl/description
This package contains a basic IEEE 802.1x/WPA Authenticator and Supplicant with WPA-PSK, SAE (WPA3-Personal), 802.11r and 802.11w support.
endef
define Package/wpad-mini
$(call Package/wpad/Default,$(1))
TITLE+= (WPA-PSK only)
VARIANT:=wpad-mini
endef
define Package/wpad-mini/description
This package contains a minimal IEEE 802.1x/WPA Authenticator and Supplicant (WPA-PSK only).
endef
define Package/wpad-mesh
$(call Package/wpad/Default,$(1))
DEPENDS+=@PACKAGE_kmod-cfg80211 @(!TARGET_uml||BROKEN)
PROVIDES+=wpa-supplicant-mesh wpad-mesh
endef
define Package/wpad-mesh/description
This package contains a minimal IEEE 802.1x/WPA Authenticator and Supplicant (with 802.11s mesh and SAE support).
endef
define Package/wpad-mesh-openssl
$(call Package/wpad-mesh,$(1))
TITLE+= (OpenSSL, 11s, SAE)
DEPENDS+=+PACKAGE_wpad-mesh-openssl:libopenssl
VARIANT:=wpad-mesh-openssl
endef
Package/wpad-mesh-openssl/description = $(Package/wpad-mesh/description)
define Package/wpad-mesh-wolfssl
$(call Package/wpad-mesh,$(1))
TITLE+= (wolfSSL, 11s, SAE)
DEPENDS+=+PACKAGE_wpad-mesh-wolfssl:libwolfssl
VARIANT:=wpad-mesh-wolfssl
endef
Package/wpad-mesh-wolfssl/description = $(Package/wpad-mesh/description)
define Package/wpa-supplicant/Default
SECTION:=net
CATEGORY:=Network
SUBMENU:=WirelessAPD
TITLE:=WPA Supplicant
URL:=http://hostap.epitest.fi/wpa_supplicant/
DEPENDS:=$(DRV_DEPENDS) +hostapd-common +libubus
EXTRA_DEPENDS:=hostapd-common (=$(PKG_VERSION)-$(PKG_RELEASE))
USERID:=network=101:network=101
PROVIDES:=wpa-supplicant
CONFLICTS:=$(SUPPLICANT_PROVIDERS)
SUPPLICANT_PROVIDERS+=$(1)
endef
define Package/wpa-supplicant
$(call Package/wpa-supplicant/Default,$(1))
TITLE+= (built-in full)
VARIANT:=supplicant-full-internal
endef
define Package/wpa-supplicant-openssl
$(call Package/wpa-supplicant/Default,$(1))
TITLE+= (OpenSSL full)
VARIANT:=supplicant-full-openssl
DEPENDS+=+PACKAGE_wpa-supplicant-openssl:libopenssl
endef
define Package/wpa-supplicant-wolfssl
$(call Package/wpa-supplicant/Default,$(1))
TITLE+= (wolfSSL full)
VARIANT:=supplicant-full-wolfssl
DEPENDS+=+PACKAGE_wpa-supplicant-wolfssl:libwolfssl
endef
define Package/wpa-supplicant/config
source "$(SOURCE)/Config.in"
endef
define Package/wpa-supplicant-p2p
$(call Package/wpa-supplicant/Default,$(1))
TITLE+= (Wi-Fi P2P support)
DEPENDS+=@PACKAGE_kmod-cfg80211
VARIANT:=supplicant-p2p-internal
endef
define Package/wpa-supplicant-mesh/Default
$(call Package/wpa-supplicant/Default,$(1))
DEPENDS+=@PACKAGE_kmod-cfg80211 @(!TARGET_uml||BROKEN)
PROVIDES+=wpa-supplicant-mesh
endef
define Package/wpa-supplicant-mesh-openssl
$(call Package/wpa-supplicant-mesh/Default,$(1))
TITLE+= (OpenSSL, 11s, SAE)
VARIANT:=supplicant-mesh-openssl
DEPENDS+=+PACKAGE_wpa-supplicant-mesh-openssl:libopenssl
endef
define Package/wpa-supplicant-mesh-wolfssl
$(call Package/wpa-supplicant-mesh/Default,$(1))
TITLE+= (wolfSSL, 11s, SAE)
VARIANT:=supplicant-mesh-wolfssl
DEPENDS+=+PACKAGE_wpa-supplicant-mesh-wolfssl:libwolfssl
endef
define Package/wpa-supplicant-basic
$(call Package/wpa-supplicant/Default,$(1))
TITLE+= (11r, 11w)
VARIANT:=supplicant-basic
endef
define Package/wpa-supplicant-mini
$(call Package/wpa-supplicant/Default,$(1))
TITLE+= (minimal)
VARIANT:=supplicant-mini
endef
define Package/hostapd-common
TITLE:=hostapd/wpa_supplicant common support files
SECTION:=net
CATEGORY:=Network
SUBMENU:=WirelessAPD
endef
define Package/hostapd-utils
SECTION:=net
CATEGORY:=Network
SUBMENU:=WirelessAPD
TITLE:=IEEE 802.1x Authenticator (utils)
URL:=http://hostap.epitest.fi/
DEPENDS:=@$(subst $(space),||,$(foreach pkg,$(HOSTAPD_PROVIDERS),PACKAGE_$(pkg)))
VARIANT:=*
endef
define Package/hostapd-utils/description
This package contains a command line utility to control the
IEEE 802.1x/WPA/EAP/RADIUS Authenticator.
endef
define Package/wpa-cli
SECTION:=net
CATEGORY:=Network
SUBMENU:=WirelessAPD
DEPENDS:=@$(subst $(space),||,$(foreach pkg,$(SUPPLICANT_PROVIDERS),PACKAGE_$(pkg)))
TITLE:=WPA Supplicant command line control utility
VARIANT:=*
endef
define Package/eapol-test/Default
TITLE:=802.1x auth test utility
SECTION:=net
SUBMENU:=WirelessAPD
CATEGORY:=Network
DEPENDS:=$(DRV_DEPENDS) +libubus
endef
define Package/eapol-test
$(call Package/eapol-test/Default,$(1))
TITLE+= (built-in full)
VARIANT:=supplicant-full-internal
endef
define Package/eapol-test-openssl
$(call Package/eapol-test/Default,$(1))
TITLE+= (OpenSSL full)
VARIANT:=supplicant-full-openssl
CONFLICTS:=$(filter-out eapol-test-openssl ,$(EAPOL_TEST_PROVIDERS))
DEPENDS+=+PACKAGE_eapol-test-openssl:libopenssl
PROVIDES:=eapol-test
endef
define Package/eapol-test-wolfssl
$(call Package/eapol-test/Default,$(1))
TITLE+= (wolfSSL full)
VARIANT:=supplicant-full-wolfssl
CONFLICTS:=$(filter-out eapol-test-openssl ,$(filter-out eapol-test-wolfssl ,$(EAPOL_TEST_PROVIDERS)))
DEPENDS+=+PACKAGE_eapol-test-wolfssl:libwolfssl
PROVIDES:=eapol-test
endef
ifneq ($(wildcard $(PKG_BUILD_DIR)/.config_*),$(subst .configured_,.config_,$(STAMP_CONFIGURED)))
define Build/Configure/rebuild
$(FIND) $(PKG_BUILD_DIR) -name \*.o -or -name \*.a | $(XARGS) rm -f
rm -f $(PKG_BUILD_DIR)/hostapd/hostapd
rm -f $(PKG_BUILD_DIR)/wpa_supplicant/wpa_supplicant
rm -f $(PKG_BUILD_DIR)/.config_*
touch $(subst .configured_,.config_,$(STAMP_CONFIGURED))
endef
endif
define Build/Configure
$(Build/Configure/rebuild)
$(if $(wildcard ./files/hostapd-$(CONFIG_VARIANT).config), \
$(CP) ./files/hostapd-$(CONFIG_VARIANT).config $(PKG_BUILD_DIR)/hostapd/.config \
)
$(if $(wildcard ./files/wpa_supplicant-$(CONFIG_VARIANT).config), \
$(CP) ./files/wpa_supplicant-$(CONFIG_VARIANT).config $(PKG_BUILD_DIR)/wpa_supplicant/.config
)
endef
TARGET_CPPFLAGS := \
-I$(STAGING_DIR)/usr/include/libnl-tiny \
-I$(PKG_BUILD_DIR)/src/crypto \
$(TARGET_CPPFLAGS) \
-DCONFIG_LIBNL20 \
-D_GNU_SOURCE \
$(if $(CONFIG_WPA_MSG_MIN_PRIORITY),-DCONFIG_MSG_MIN_PRIORITY=$(CONFIG_WPA_MSG_MIN_PRIORITY))
TARGET_CFLAGS += -ffunction-sections -fdata-sections -flto
TARGET_LDFLAGS += -Wl,--gc-sections -flto=jobserver -fuse-linker-plugin -lubox -lubus
ifdef CONFIG_PACKAGE_kmod-cfg80211
TARGET_LDFLAGS += -lm -lnl-tiny
endif
ifdef CONFIG_WPA_ENABLE_WEP
DRIVER_MAKEOPTS += CONFIG_WEP=y
endif
define Build/RunMake
CFLAGS="$(TARGET_CPPFLAGS) $(TARGET_CFLAGS)" \
$(MAKE) $(PKG_JOBS) -C $(PKG_BUILD_DIR)/$(1) \
$(TARGET_CONFIGURE_OPTS) \
$(DRIVER_MAKEOPTS) \
LIBS="$(TARGET_LDFLAGS)" \
LIBS_c="$(TARGET_LDFLAGS_C)" \
AR="$(TARGET_CROSS)gcc-ar" \
BCHECK= \
$(if $(findstring s,$(OPENWRT_VERBOSE)),V=1) \
$(2)
endef
define Build/Compile/wpad
echo ` \
$(call Build/RunMake,hostapd,-s MULTICALL=1 dump_cflags); \
$(call Build/RunMake,wpa_supplicant,-s MULTICALL=1 dump_cflags) | \
sed -e 's,-n ,,g' -e 's^$(TARGET_CFLAGS)^^' \
` > $(PKG_BUILD_DIR)/.cflags
sed -i 's/"/\\"/g' $(PKG_BUILD_DIR)/.cflags
+$(call Build/RunMake,hostapd, \
CFLAGS="$$$$(cat $(PKG_BUILD_DIR)/.cflags)" \
MULTICALL=1 \
hostapd_cli hostapd_multi.a \
)
+$(call Build/RunMake,wpa_supplicant, \
CFLAGS="$$$$(cat $(PKG_BUILD_DIR)/.cflags)" \
MULTICALL=1 \
wpa_cli wpa_supplicant_multi.a \
)
+export MAKEFLAGS="$(MAKE_JOBSERVER)"; $(TARGET_CC) -o $(PKG_BUILD_DIR)/wpad \
$(TARGET_CFLAGS) \
./files/multicall.c \
$(PKG_BUILD_DIR)/hostapd/hostapd_multi.a \
$(PKG_BUILD_DIR)/wpa_supplicant/wpa_supplicant_multi.a \
$(TARGET_LDFLAGS)
endef
define Build/Compile/hostapd
+$(call Build/RunMake,hostapd, \
hostapd hostapd_cli \
)
endef
define Build/Compile/supplicant
+$(call Build/RunMake,wpa_supplicant, \
wpa_cli wpa_supplicant \
)
endef
define Build/Compile/supplicant-full-internal
+$(call Build/RunMake,wpa_supplicant, \
eapol_test \
)
endef
define Build/Compile/supplicant-full-openssl
+$(call Build/RunMake,wpa_supplicant, \
eapol_test \
)
endef
define Build/Compile/supplicant-full-wolfssl
+$(call Build/RunMake,wpa_supplicant, \
eapol_test \
)
endef
define Build/Compile
$(Build/Compile/$(LOCAL_TYPE))
$(Build/Compile/$(BUILD_VARIANT))
endef
define Install/hostapd
$(INSTALL_DIR) $(1)/usr/sbin
endef
define Install/supplicant
$(INSTALL_DIR) $(1)/usr/sbin
endef
define Package/hostapd-common/install
$(INSTALL_DIR) $(1)/etc/capabilities $(1)/etc/rc.button $(1)/etc/hotplug.d/ieee80211 $(1)/etc/init.d $(1)/lib/netifd $(1)/usr/share/acl.d
$(INSTALL_BIN) ./files/dhcp-get-server.sh $(1)/lib/netifd/dhcp-get-server.sh
$(INSTALL_DATA) ./files/hostapd.sh $(1)/lib/netifd/hostapd.sh
$(INSTALL_BIN) ./files/wpad.init $(1)/etc/init.d/wpad
$(INSTALL_BIN) ./files/wps-hotplug.sh $(1)/etc/rc.button/wps
$(INSTALL_DATA) ./files/wpad_acl.json $(1)/usr/share/acl.d
$(INSTALL_DATA) ./files/wpad.json $(1)/etc/capabilities
endef
define Package/hostapd/install
$(call Install/hostapd,$(1))
$(INSTALL_BIN) $(PKG_BUILD_DIR)/hostapd/hostapd $(1)/usr/sbin/
endef
Package/hostapd-basic/install = $(Package/hostapd/install)
Package/hostapd-basic-openssl/install = $(Package/hostapd/install)
Package/hostapd-basic-wolfssl/install = $(Package/hostapd/install)
Package/hostapd-mini/install = $(Package/hostapd/install)
Package/hostapd-openssl/install = $(Package/hostapd/install)
Package/hostapd-wolfssl/install = $(Package/hostapd/install)
ifneq ($(LOCAL_TYPE),supplicant)
define Package/hostapd-utils/install
$(INSTALL_DIR) $(1)/usr/sbin
$(INSTALL_BIN) $(PKG_BUILD_DIR)/hostapd/hostapd_cli $(1)/usr/sbin/
endef
endif
define Package/wpad/install
$(call Install/hostapd,$(1))
$(call Install/supplicant,$(1))
$(INSTALL_BIN) $(PKG_BUILD_DIR)/wpad $(1)/usr/sbin/
$(LN) wpad $(1)/usr/sbin/hostapd
$(LN) wpad $(1)/usr/sbin/wpa_supplicant
endef
Package/wpad-basic/install = $(Package/wpad/install)
Package/wpad-basic-openssl/install = $(Package/wpad/install)
Package/wpad-basic-wolfssl/install = $(Package/wpad/install)
Package/wpad-mini/install = $(Package/wpad/install)
Package/wpad-openssl/install = $(Package/wpad/install)
Package/wpad-wolfssl/install = $(Package/wpad/install)
Package/wpad-mesh-openssl/install = $(Package/wpad/install)
Package/wpad-mesh-wolfssl/install = $(Package/wpad/install)
define Package/wpa-supplicant/install
$(call Install/supplicant,$(1))
$(INSTALL_BIN) $(PKG_BUILD_DIR)/wpa_supplicant/wpa_supplicant $(1)/usr/sbin/
endef
Package/wpa-supplicant-basic/install = $(Package/wpa-supplicant/install)
Package/wpa-supplicant-mini/install = $(Package/wpa-supplicant/install)
Package/wpa-supplicant-p2p/install = $(Package/wpa-supplicant/install)
Package/wpa-supplicant-openssl/install = $(Package/wpa-supplicant/install)
Package/wpa-supplicant-wolfssl/install = $(Package/wpa-supplicant/install)
Package/wpa-supplicant-mesh-openssl/install = $(Package/wpa-supplicant/install)
Package/wpa-supplicant-mesh-wolfssl/install = $(Package/wpa-supplicant/install)
ifneq ($(LOCAL_TYPE),hostapd)
define Package/wpa-cli/install
$(INSTALL_DIR) $(1)/usr/sbin
$(CP) $(PKG_BUILD_DIR)/wpa_supplicant/wpa_cli $(1)/usr/sbin/
endef
endif
ifeq ($(BUILD_VARIANT),supplicant-full-internal)
define Package/eapol-test/install
$(INSTALL_DIR) $(1)/usr/sbin
$(CP) $(PKG_BUILD_DIR)/wpa_supplicant/eapol_test $(1)/usr/sbin/
endef
endif
ifeq ($(BUILD_VARIANT),supplicant-full-openssl)
define Package/eapol-test-openssl/install
$(INSTALL_DIR) $(1)/usr/sbin
$(CP) $(PKG_BUILD_DIR)/wpa_supplicant/eapol_test $(1)/usr/sbin/
endef
endif
ifeq ($(BUILD_VARIANT),supplicant-full-wolfssl)
define Package/eapol-test-wolfssl/install
$(INSTALL_DIR) $(1)/usr/sbin
$(CP) $(PKG_BUILD_DIR)/wpa_supplicant/eapol_test $(1)/usr/sbin/
endef
endif
# Build hostapd-common before its dependents, to avoid
# spurious rebuilds when building multiple variants.
$(eval $(call BuildPackage,hostapd-common))
$(eval $(call BuildPackage,hostapd))
$(eval $(call BuildPackage,hostapd-basic))
$(eval $(call BuildPackage,hostapd-basic-openssl))
$(eval $(call BuildPackage,hostapd-basic-wolfssl))
$(eval $(call BuildPackage,hostapd-mini))
$(eval $(call BuildPackage,hostapd-openssl))
$(eval $(call BuildPackage,hostapd-wolfssl))
$(eval $(call BuildPackage,wpad))
$(eval $(call BuildPackage,wpad-mesh-openssl))
$(eval $(call BuildPackage,wpad-mesh-wolfssl))
$(eval $(call BuildPackage,wpad-basic))
$(eval $(call BuildPackage,wpad-basic-openssl))
$(eval $(call BuildPackage,wpad-basic-wolfssl))
$(eval $(call BuildPackage,wpad-mini))
$(eval $(call BuildPackage,wpad-openssl))
$(eval $(call BuildPackage,wpad-wolfssl))
$(eval $(call BuildPackage,wpa-supplicant))
$(eval $(call BuildPackage,wpa-supplicant-mesh-openssl))
$(eval $(call BuildPackage,wpa-supplicant-mesh-wolfssl))
$(eval $(call BuildPackage,wpa-supplicant-basic))
$(eval $(call BuildPackage,wpa-supplicant-mini))
$(eval $(call BuildPackage,wpa-supplicant-p2p))
$(eval $(call BuildPackage,wpa-supplicant-openssl))
$(eval $(call BuildPackage,wpa-supplicant-wolfssl))
$(eval $(call BuildPackage,wpa-cli))
$(eval $(call BuildPackage,hostapd-utils))
$(eval $(call BuildPackage,eapol-test))
$(eval $(call BuildPackage,eapol-test-openssl))
$(eval $(call BuildPackage,eapol-test-wolfssl))
Reference in New Issue View Git Blame Copy Permalink