Add solution of CH395, which is an ethernet IC chip
from WCH company, to dsa, gsw for mt7981, mt7986.
1. For dsa, CR will be written in mediatek_ge.c
2. For gsw, CR will be written in mt7531.c
3. Enable mt7986 mediatek_ge.c config
[Release-log]
This patch will adjust RX min/max gain. Without this patch,
it may cause a link up fail for CH395 chip under 100Mbps.
In order to enhance the stability of your products,
it's better to merge this patch in your codebase.
Change-Id: If07b4ffc060defb5460ecf98339c1cdd3520a128
Reviewed-on: https://gerrit.mediatek.inc/c/openwrt/feeds/mtk_openwrt_feeds/+/7858068
Fix the conditions for adding vlan info.
When eth1.x -> wifi, packets cannot be forwarded through the HW path.
(due to with wrong HNAT vlan info)
The patch fix it.
[Release-log]
N/A
Change-Id: Id9e02493157bfc2f3a4dbf046be127cd491f9b17
Reviewed-on: https://gerrit.mediatek.inc/c/openwrt/feeds/mtk_openwrt_feeds/+/7778652
[Description]
Fix log print level in foe_clear_entry.
There are too many logs when neighbor update,
the logs should be printed on debug level.
[Release-log]
N/A
Change-Id: Ic9b75aa5da33f1ab1f398408811487f72ba9f29b
Reviewed-on: https://gerrit.mediatek.inc/c/openwrt/feeds/mtk_openwrt_feeds/+/7709249
Those sort out BCM53573 Ethernet info finally.
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
(cherry picked from commit ca8868a51127f6081a524d47eab937b90af0bf05)
It seems that DSA-based b53 driver never worked with BCM53573 SoCs and
BCM53125.
In case of swconfig-based b53 this fixes a regression. Switching bgmac
from using mdiobus_register() to of_mdiobus_register() resulted in MDIO
device (BCM53125) having of_node set (see of_mdiobus_register_phy()).
That made downstream b53 driver read invalid data from DT and broke
Ethernet support.
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
(cherry picked from commit 79fd3e62b4910731c13692b2daa2083e0f95c023)
Basic fan controls are working, including PWM and
tachometer.
RPM target mode is not working yet.
Signed-off-by: Robert Marko <robimarko@gmail.com>
Signed-off-by: Tianling Shen <cnsztl@immortalwrt.org>
'help' target fails not finding a file, so follow up on a change[2] made
as a fix for main README[1].
1. d0113711a31f ("README: port to 21st century")
2. 751486b31fd9 ("build: fix README.md reference after rename")
Signed-off-by: Tomasz Maciej Nowak <tmn505@gmail.com>
(cherry picked from commit 2d5f7035cf45801158bed6f5d0ac0de0002c1810)
(cherry picked from commit e9911f10e482f3174f745a36c0c9fd7964758caf)
Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
Some device recipes remove default target packages. If user tries to add
them back they will be ignored, since packages list is processed in one
go. Process the device recipe packages first and do user ones later, so
additions won't get filtered out.
Signed-off-by: Tomasz Maciej Nowak <tmn505@gmail.com>
(cherry picked from commit e40b9a7fa002154e85459791101a0444d99dfb86)
Fix possibly null pointer and memory leak.
When skb_headroom(skb) < FOE_INFO_LEN, it means that hnat headroom of
the message is incomplete and may have been truncated by other functions.
HNAT should return and not relalloc skb.
If without the patch, may met NULL pointer and memory leak issue.
[Release-log]
N/A
Change-Id: I490191fa2be5fd1d664b228ef7c97951d0efe036
Reviewed-on: https://gerrit.mediatek.inc/c/openwrt/feeds/mtk_openwrt_feeds/+/7694271
* autocore: remove ethinfo for mtk arm boards
mediatek target uses legacy swconfig which is not supported by autocore.
Signed-off-by: Tianling Shen <cnsztl@immortalwrt.org>
* mediatek: add support for Livinet ZR-3020
Signed-off-by: Tianling Shen <cnsztl@immortalwrt.org>
---------
Signed-off-by: Tianling Shen <cnsztl@immortalwrt.org>
Fix hook drop normal packet
In some cases, the packet match the to the logic
of eth->wlan of the legacy chip(mt7621).
After failing to find the interface,
it will be discarded by the hnat function.
Here packets should be handed over to the kernel
[Release-log]
N/A
Change-Id: Idca4c6e899e743c89fbcb562f2695a77b02a98af
Reviewed-on: https://gerrit.mediatek.inc/c/openwrt/feeds/mtk_openwrt_feeds/+/7265953
The DGND3700v2 renames the cferam bootloader from cferam to cfeXXX, where XXX
is the number of firmware upgrades performed by the bootloader. Other bcm63xx
devices rename cferam.000 to cferam.XXX, but this device is special because
the cferam name isn't changed on the first firmware flashing but it's changed
on the subsequent ones.
Therefore, we need to look for "cfe" instead of "cferam" to properly detect
the cferam partition and fix the bootlop.
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
(cherry picked from commit cdfcac6e246de9f237d1425e498db3f34ddebbaf)
Some devices rename cferam bootloader using specific patterns and don't follow
broadcom standards for renaming cferam files. This requires supporting
different cferam file names.
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
(cherry picked from commit 8813edd8d9695d4e3939fdaa3c530c682f91de11)
The FriendlyARM NanoPi R4SE is a minor variant of R4S with a on-board eMMC.
Signed-off-by: Tianling Shen <cnsztl@immortalwrt.org>
(cherry picked from commit 1ef239173c8728e28ee913a333944c5f78276915)
Import commit "ubi: Fix failure attaching when vid_hdr offset equals to
(sub)page size" which did not yet make it to stable upstream Linux trees.
Fixes: #12232Fixes: #12339
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
(cherry picked from commit aad34818b50029e07ed9221ae46f9770d6e29785)
Setting this options modifies the rootfs size of created images. When
installing a large number of packages it may become necessary to
increase the size to have enough storage.
This option is only useful for supported devices, i.e. with an attached
SD Card or installed on a hard drive.
Signed-off-by: Paul Spooren <mail@aparcar.org>
(cherry picked from commit 7b7edd25a571568438c886529d3443054e02f55f)
There's no valid mac address for the second band in the eeprom.
The vendor fw uses 2.4G mac + 4 as the mac for 5G radio.
Do the same in our firmware.
Fixes: 23be410b3d ("ramips: add support for TOTOLINK X5000R")
Signed-off-by: Chuanhong Guo <gch981213@gmail.com>
(cherry picked from commit 212632540043cc9b911c2efb86156479f2710836)
Keep this for shortcut-fe.
This reverts commit cbe73ea33d027dbb4b2cf1eca947ae746119e7d2.
Fixes: #923
Signed-off-by: Tianling Shen <cnsztl@immortalwrt.org>
On any currently supported hardware, the performance impact should not
matter anymore.
Signed-off-by: Felix Fietkau <nbd@nbd.name>
(cherry picked from commit 75e78bcaab847557ce1782eb2dea9dff9a029171)
The USB port on the MR8300 randomly fails to feed bus-powered devices.
This is caused by a misconfigured pinmux. The GPIO68 should be used to
enable the USB power (active low), but it's inside the NAND pinmux.
This GPIO pin was found in the original firmware at a startup script in
both MR8300 and EA8300. Therefore apply the fix for both boards.
Signed-off-by: Daniel González Cabanelas <dgcbueu@gmail.com>
Reviewed-by: Robert Marko <robimarko@gmail.com>
(cherry picked from commit ed64c3323590e3c9fa8b423bf37689023a7a101f)
Signed-off-by: Steffen Scheib <steffen@scheib.me>
