Hardware specification:
SoC: MediaTek MT7981B 2x A53
Flash: 128 MB SPI-NAND
RAM: 256MB
Ethernet: 4x 10/100/1000 Mbps
Switch: MediaTek MT7531AE
WiFi: MediaTek MT7976C
Button: Reset, WPS/Mesh
Power: DC 12V 1A
Gain SSH access:
1. Login into web interface, and download the configuration.
2. Download the configration utilities:
https://firmware.download.immortalwrt.eu.org/cnsztl/mediatek/filogic/openwrt-mediatek-mt7981-nokia-ea0326gmp-config-utils.tar.gz
These binaries are extraced from the factory firmware, which are
dynamically linked with aarch64 musl 1.1.24. To use them, you
must run them under the same runtime environment, otherwise the
binaries will not work!
3. Upload the configuration and utilities to a suitable environment.
4. Uncompress the utilities, move them to '/bin' and give them executable permisison:
tar -zxf openwrt-mediatek-mt7981-nokia-ea0326gmp-config-utils.tar.gz
mv mkconfig seama /bin
chmod +x /bin/mkconfig
chmod +x /bin/seama
5. Decrypt and uncompress the configuration:
Enter fakeroot if you are not login as root.
mkconfig -a de-enca -m EA0326GMP_3FE79221BAAA -i EA0326GMP_3FE79221BAAA-xxxxxxxx-backup.tar.gz -o backup.tar.gz
tar -zxf backup.tar.gz
6. Edit 'etc/config/dropbear', set 'enable' to '1'.
7. Edit `etc/passwd`, remove root password: 'root::1:0:99999:7:::'.
8. Repack the configuration:
tar -zcf backup.tar.gz etc/
mkconfig -a enca -m EA0326GMP_3FE79221BAAA -i backup.tar.gz -o EA0326GMP_3FE79221BAAA-xxxxxxxx-backup.tar.gz
9. Upload new configuration via web interface, now you can SSH to EA0326GMP.
A minimum configuration which enabled SSH access is also provided to simplify the process:
https://firmware.download.immortalwrt.eu.org/cnsztl/mediatek/filogic/openwrt-mediatek-mt7981-nokia-ea0326gmp-enable-ssh.tar.gz
Flash instructions:
1. SSH to EA0326GMP, backup everything, especially 'Factory' part.
2. Write new FIP provided by https://github.com/hanwckf/bl-mt798x.
3. Reboot, enter web failsafe and upload -factory.bin firmware.
Signed-off-by: Tianling Shen <cnsztl@immortalwrt.org>
Fix BIND entry with DP=0 issue for Wifi Tx
Without this patch, the PPE entry state could be set to BIND
unexpectedly, adds a check to confirm if the copied entry
state is UNBIND.
[Release-log]
N/A
Change-Id: I49825572617eb804cda18e8f054b9106f26926bb
Reviewed-on: https://gerrit.mediatek.inc/c/openwrt/feeds/mtk_openwrt_feeds/+/8498669
Change qdma dmad from sram to dram
[Release-log]
-dmad in sram and payload in dram may probabilistic cause control
path is incoherent with payload path
-causing the actual packet sent is not the one
you really want
Change-Id: Ieeca5093f3cb24e07d659c8bec10fbaa0bbb336a
Reviewed-on: https://gerrit.mediatek.inc/c/openwrt/feeds/mtk_openwrt_feeds/+/7912387
Remove QDMA global configuration for PKT_RX_WDONE
-- customer corner test case may occur qmda rx hang
-- DE confirm this item may cause qdma rx hang, it is hw bug
[Release-log]
Change-Id: I104ffbcdf140f8f7bf66d20b3f2ad349d733158f
Reviewed-on: https://gerrit.mediatek.inc/c/openwrt/feeds/mtk_openwrt_feeds/+/6270079
Change code for memory free which may cause memory leak
-- memory leak occurs when user use DRAM for DMAD
-- SRAM ==1, no need free ring->dma
-- SRAM ==0, DMAD memory should be freed in mtk_rx_clean
[Release-log]
N/A
Change-Id: I599d3e38c66d67c0e9bfd7afc3e8f773258f97db
Reviewed-on: https://gerrit.mediatek.inc/c/openwrt/feeds/mtk_openwrt_feeds/+/6182630
