92 Commits

Author SHA1 Message Date
hanwckf
606a7d6270 Merge branch 'openwrt-21.02' of https://github.com/immortalwrt/immortalwrt into openwrt-21.02 2022-12-15 19:51:45 +08:00
hanwckf
c1f27cf3ed mediatek: revert mtk_eth_soc & hnat driver to mtk-openwrt-feeds 'afff566' 2022-12-15 00:52:18 +08:00
Rafał Miłecki
50d255d4a8 kernel: backport b53/bcm_sf2 changes from v5.8
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
2022-12-07 10:30:14 +01:00
Rafał Miłecki
88a71fbe77 kernel: backport b53/bcm_sf2 changes from v5.7
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
2022-12-07 10:30:14 +01:00
Rafał Miłecki
1f5024aa73 kernel: backport b53/bcm_sf2 changes from v5.6
This b53 backport significantly stabilizes switch traffic performance.

Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
2022-12-07 10:30:14 +01:00
Rafał Miłecki
067d7e9f90 kernel: backport b53/bcm_sf2 changes from v5.5
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
2022-12-07 10:30:14 +01:00
developer
2899ea2b8e [Description]
Fix mtd test pagetest for QVL test, add operation count.

[Release-log]
N/A

Change-Id: I720b1c124445933bf5a277194da5d63467bb0227
Reviewed-on: https://gerrit.mediatek.inc/c/openwrt/feeds/mtk_openwrt_feeds/+/6843549
2022-12-03 01:39:45 +08:00
developer
b22475552d [Description]
Fix Converity scan error.

[Release-log]
N/A

Change-Id: I755ce2ea040b093a993a1859ff3a009c64ae6bed
Reviewed-on: https://gerrit.mediatek.inc/c/openwrt/feeds/mtk_openwrt_feeds/+/6838042
2022-12-03 01:39:41 +08:00
developer
cec6012a69 [Description]
Fix Intel X550 IOT issue.

Due to X550 doesn't advertise 2.5G/5G link capability, phlylink
cannot resolve link speed/duplex in the phy_resolve_aneg_linkmode().
Therefore, we handle the link speed from vendor registers.

If without this patch, phylink will show unknown speed messages
when link with NBASE-T link partner.

[Release-log]
N/A

Change-Id: Iaef49fe8ea6ef7c6dc022e50456903b7feb4eef6
Reviewed-on: https://gerrit.mediatek.inc/c/openwrt/feeds/mtk_openwrt_feeds/+/6852800
2022-12-03 01:34:47 +08:00
Hauke Mehrtens
e506a0d50f kernel: bump 5.4 to 5.4.224
Compile-tested: x86/64
Run-tested: x86/64

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
2022-11-27 16:28:00 +01:00
hanwckf
a8880da6ce Revert "mediatek: add mtk_eth_soc patches from upstream"
This reverts commit 9092e74f365b464f29af00203c6925063562a860.
2022-11-18 00:37:45 +08:00
hanwckf
9092e74f36 mediatek: add mtk_eth_soc patches from upstream 2022-11-16 22:08:50 +08:00
hanwckf
3015b9b636 kernel: move mtd patches from mediatek target to generic 2022-11-16 22:08:49 +08:00
hanwckf
309e64b088 mediatek: remove unneeded patches 2022-11-16 22:08:49 +08:00
hanwckf
d56beafc56 mediatek: add kernel patches 2022-11-16 22:08:49 +08:00
Hauke Mehrtens
bcaabe6d05 kernel: bump 5.4 to 5.4.211
Similar version was upstreamed:
 bcm27xx/patches-5.4/950-0392-tty-amba-pl011-Add-un-throttle-support.patch

Manually adapted:
 ipq806x/patches-5.4/0063-2-tsens-support-configurable-interrupts.patch
 layerscape/patches-5.4/301-arch-0008-arm-add-new-non-shareable-ioremap.patch

Compile-tested: x86/64
Run-tested: x86/64

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
2022-09-04 15:32:22 +02:00
Hauke Mehrtens
be0639063a kernel: bump 5.4 to 5.4.203
Merged upstream:
 bcm27xx/patches-5.4/950-1014-Revert-mailbox-avoid-timer-start-from-callback.patch
 generic/backport-5.4/080-wireguard-0021-crypto-blake2s-generic-C-library-implementation-and-.patch

Manually adapted:
 layerscape/patches-5.4/801-audio-0005-Revert-ASoC-fsl_sai-Add-support-for-SAI-new-version.patch
 oxnas/patches-5.4/100-oxnas-clk-plla-pllb.patch

Compile-tested: lantiq/xrx200
Run-tested: lantiq/xrx200

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
2022-07-03 19:58:31 +02:00
Hauke Mehrtens
7ae0f74bcd kernel: bump 5.4 to 5.4.192
Compile-tested: armvirt/64
Run-tested: armvirt/64

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
2022-05-18 00:11:17 +02:00
Hauke Mehrtens
e0bdf83972 kernel: bump 5.4 to 5.4.191
Merged upstream:
 apm821xx/patches-5.4/150-ata-sata_dwc_460ex-Fix-crash-due-to-OOB-write.patch

Similar patch merged upstream:
 bcm27xx/patches-5.4/950-0210-usb-xhci-Disable-the-XHCI-5-second-timeout.patch

Manually adapted:
 layerscape/patches-5.4/801-audio-0008-Revert-ASoC-Remove-dev_err-usage-after-platform_get_.patch

Compile-tested: armvirt/64
Run-tested: armvirt/64

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
2022-05-18 00:10:34 +02:00
Hauke Mehrtens
c6ddf8d502 kernel: bump 5.4 to 5.4.179
Many changes were done in drivers/pinctrl/bcm/pinctrl-bcm2835.c between
5.4.171 and 5.4.179.
The following 3 patches do not apply any more:
* target/linux/bcm27xx/patches-5.4/950-0316-pinctrl-bcm2835-Add-support-for-BCM2711-pull-up-func.patch
  This was already integrated in kernel v5.4-rc1, it was never needed.

* target/linux/bcm27xx/patches-5.4/950-0328-Revert-pinctrl-bcm2835-Pass-irqchip-when-adding-gpio.patch
* target/linux/bcm27xx/patches-5.4/950-0362-pinctrl-bcm2835-Change-init-order-for-gpio-hogs.patch
I think these were done to fix the problem which was really fixed in
commit 75278f1aff5e ("pinctrl: bcm2835: Change init order for gpio
hogs") from v5.4.175

target/linux/generic/backport-5.4/716-v5.5-net-sfp-move-fwnode-parsing-into-sfp-bus-layer.patch
Move fwnode_device_is_available to the same position as in kernel 5.10.

target/linux/layerscape/patches-5.4/302-dts-0083-arm64-ls1028a-qds-correct-bus-of-rtc.patch
Applied in commit 65816c1034769e714edb70f59a33bc5472d9e55f ("arm64: dts:
ls1028a-qds: move rtc node to the correct i2c bus")

Compile-tested: lantiq/xrx200, bcm27xx/bcm2710
Run-tested: lantiq/xrx200

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
2022-02-12 19:41:39 +01:00
Hauke Mehrtens
14940aee45 kernel: bump 5.4 to 5.4.163
Removed upstreamed:
 target/linux/mvebu/patches-5.4/001-PCI-aardvark-Wait-for-endpoint-to-be-ready-before-tr.patch
 target/linux/mvebu/patches-5.4/016-PCI-aardvark-Train-link-immediately-after-enabling-t.patch
 target/linux/mvebu/patches-5.4/017-PCI-aardvark-Improve-link-training.patch
 target/linux/mvebu/patches-5.4/018-PCI-aardvark-Issue-PERST-via-GPIO.patch
 target/linux/mvebu/patches-5.4/020-arm64-dts-marvell-armada-37xx-Set-pcie_reset_pin-to-.patch

The following patch does not apply to upstream any more and needs some
more work to make it work fully again. I am not sure if we are still
able to set the UART to a none standard baud rate.
 target/linux/ath79/patches-5.4/921-serial-core-add-support-for-boot-console-with-arbitr.patch

These patches needed manually changes:
  target/linux/generic/pending-5.4/110-ehci_hcd_ignore_oc.patch
  target/linux/ipq806x/patches-5.4/0065-arm-override-compiler-flags.patch
  target/linux/layerscape/patches-5.4/804-crypto-0016-MLKU-114-1-crypto-caam-reduce-page-0-regs-access-to-.patch
  target/linux/mvebu/patches-5.4/019-PCI-aardvark-Add-PHY-support.patch
  target/linux/octeontx/patches-5.4/0004-PCI-add-quirk-for-Gateworks-PLX-PEX860x-switch-with-.patch

All others updated automatically.

Compile-tested on: malta/le, armvirt/64, lantiq/xrx200
Runtime-tested on: malta/le, armvirt/64, lantiq/xrx200

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
2021-12-12 20:08:17 +01:00
Hauke Mehrtens
8cc7ac54b6 kernel: bump 5.4 to 5.4.150
Manually rebased:
  generic/backport-5.4/370-netfilter-nf_flow_table-fix-offloaded-connection-tim.patch
  generic/pending-5.4/800-bcma-get-SoC-device-struct-copy-its-DMA-params-to-th.patch
  mvebu/patches-5.4/021-arm64-dts-marvell-armada-37xx-Move-PCIe-comphy-handl.patch

Removed upstreamed:
  generic/backport-5.4/040-ARM-8918-2-only-build-return_address-if-needed.patch
  layerscape/patches-5.4/819-uart-0004-MLK-18137-fsl_lpuart-Fix-loopback-mode.patch

All others updated automatically.

Compile-tested on: lantiq/xrx200, armvirt/64
Runtime-tested on: lantiq/xrx200, armvirt/64

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
2021-10-02 16:05:34 +02:00
David Bauer
378769b555 kernel: bump 5.4 to 5.4.142
Compile-tested: ath79-generic ipq40xx-generic
Run-tested: ipq40xx-generic

Signed-off-by: David Bauer <mail@david-bauer.net>
2021-08-24 19:41:47 +02:00
Hauke Mehrtens
a1d50e7b45 kernel: bump 5.4 to 5.4.132
Manually rebased
  layerscape/patches-5.4/805-display-0002-drm-rockchip-prepare-common-code-for-cdns-and-rk-dpi.patch

All others updated automatically.

Compile-tested on: ramips/mt7621
Runtime-tested on: ramips/mt7621

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
2021-07-19 22:47:17 +02:00
Hauke Mehrtens
85cef1cf22 kernel: bump 5.4 to 5.4.128
Manually rebased
  bcm27xx/patches-5.4/950-0089-cgroup-Disable-cgroup-memory-by-default.patch
    Replaced with patch from Raspberry Pi kernel 5.10 patches
  mvebu/patches-5.4/002-PCI-aardvark-Don-t-rely-on-jiffies-while-holding-spi.patch
    Applied upstream

All others updated automatically.

Compile-tested on: ath79/generic, lantiq/xrx200, brcm27xx
Runtime-tested on: ath79/generic, lantiq/xrx200

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
2021-06-27 00:58:50 +02:00
Hauke Mehrtens
b55d3d6904 kernel: bump 5.4 to 5.4.124
Manually rebased
  generic/hack-5.4/662-remove_pfifo_fast.patch
  ramips/patches-5.4/0048-asoc-add-mt7620-support.patch

All others updated automatically.

Compile-tested on: armvirt/64, x86/generic, ath79/generic, ramips/mt7621
Runtime-tested on: armvirt/64, x86/generic, ath79/generic

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
2021-06-06 17:54:51 +02:00
Hauke Mehrtens
438718b5fb kernel: bump 5.4 to 5.4.114
Removed because in upstream*
  mvebu/patches-5.4/319-ARM-dts-turris-omnia-configure-LED-2--INTn-pin-as-interrupt-pin.patch

Manually rebased*
  generic/backport-5.4/700-v5.5-net-core-allow-fast-GRO-for-skbs-with-Ethernet-heade.patch

Added new backport*
  generic/backport-5.4/050-gro-fix-napi_gro_frags-Fast-GRO-breakage-due-to-IP-a.patch

All others updated automatically.

The new backport was included based on this[1] upstream commit that will be
mainlined soon.  This change is needed because Eric Dumazet's check for
NET_IP_ALIGN (landed in 5.4.114) causes huge slowdowns on drivers which use
napi_gro_frags().

Compile-tested on: x86/64, armvirt/64, ath79/generic
Runtime-tested on: x86/64, armvirt/64, ath79/generic

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
2021-05-02 14:32:27 +02:00
Hauke Mehrtens
3da861ccca kernel: bump 5.4 to 5.4.111
Refreshed all patches.

The following patches were manually changed:
* 610-netfilter_match_bypass_default_checks.patch
* 611-netfilter_match_bypass_default_table.patch
* 802-can-0002-can-rx-offload-fix-long-lines.patch
* 802-can-0003-can-rx-offload-can_rx_offload_compare-fix-typo.patch
* 802-can-0004-can-rx-offload-can_rx_offload_irq_offload_timestamp-.patch
* 802-can-0005-can-rx-offload-can_rx_offload_reset-remove-no-op-fun.patch
* 802-can-0006-can-rx-offload-Prepare-for-CAN-FD-support.patch
* 802-can-0018-can-flexcan-use-struct-canfd_frame-for-CAN-classic-f.patch

The can-dev.ko model was moved in the upstream kernel.

Compile-tested on: x86/64, armvirt/64, ath79/generic
Runtime-tested on: x86/64, armvirt/64, ath79/generic

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
2021-04-11 17:35:12 +02:00
Hauke Mehrtens
2464a9a8a4 kernel: bump 5.4 to 5.4.108
Refreshed all patches.

Compile-tested on: x86_64, ath79, lantiq
Runtime-tested on: x86_64, ath79

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
2021-03-27 16:26:56 +01:00
Hauke Mehrtens
8b3d879861 kernel: bump 5.4 to 5.4.102
Refreshed all patches.

Compile-tested on: ath79, lantiq, ipq40xx, x86_64
Runtime-tested on: ipq40xx, x86_64

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
2021-03-06 15:51:54 +01:00
David Bauer
194e85e7db mediatek: add support for Ubiquiti UniFi 6 LR
Hardware
--------

MediaTek MT7622
512MB DDR3 RAM
64M SPI-NOR Flash (Winbond W25Q512JV)
MediaTek MT7622 802.11bgn 4T4R WMAC
MediaTek MT7915 802.11ax 4T4R
Marvell AQR1112 100/1000/2500 NBase-T PHY
Holtek HT32F52241 LED controller
Reset Switch

UART
----

CPU UART0 at the pinout next to the Holtek MCU.

Pinout (first pin next to SoC / MCU)

0 3V3
1 RX
2 TX
3 GND

Settings are 115200 8N1.

Opening the case
----------------

Opening the case is not a nice task, as itis glued together. Insert a
flat knife between the front and back casing below the ethernet port.
Open up a gap this way and insert a flat scredriver, remove the knife.

Work your way around the casing by applying force to seperate the front
and back casing. This losens the glue and opens the plastic clips. Be
gentle, as these clips are very cheap and break quickly.

Installation
------------

1. Connect to the booted device at 192.168.1.20 using username/password
   "ubnt".

2. Transfer the OpenWrt sysupgrade image to the device using SCP.

3. Check the mtd partition number for bs / kernel0 / kernel1

   $ cat /proc/mtd

4. Set the bootselect flag to boot from kernel0

   $ dd if=/dev/zero bs=1 count=1 of=/dev/mtdblock6

5. Write the OpenWrt sysupgrade image to both kernel0 as well as kernel1

   $ dd if=openwrt.bin of=/dev/mtdblock8
   $ dd if=openwrt.bin of=/dev/mtdblock9

6. Reboot the device. It should boot into OpenWrt.

Signed-off-by: David Bauer <mail@david-bauer.net>
(cherry picked from commit 634c13c186646aff2badb51a43b248825d0fe5a0)
2021-02-18 12:14:34 +01:00
David Bauer
ee6349fbe5 mediatek: add Ubiquiti LED driver
Add a driver for controlling the RGB LED via Ubiquitis own "LEDBAR" LED
controller based on the Holtek HT32F52241 MCU.

This driver is initially used by the Ubiquiti UniFi 6 LR, however
judging from FCC pictures the MCU is also found on the U6-Mesh as well
as the U6-Extender.

Signed-off-by: David Bauer <mail@david-bauer.net>
(cherry picked from commit c9137e2ddf97ede1db399dc38acff26feb48ba7e)
2021-02-18 12:14:25 +01:00
John Audia
f3b827a965 kernel: bump 5.4 to 5.4.96
Ran update_kernel.sh in a fresh clone without any existing toolchains.

Build system: x86_64
Build-tested: ipq806x/R7800, bcm27xx/bcm2711
Run-tested: ipq806x/R7800
Run-tested [*]: ramips/mt7621 (R6800, DIR-878 A1, EAP235-Wall)

Signed-off-by: John Audia <graysky@archlinux.us>
Tested-by: Stijn Segers <foss@volatilesystems.org> [*]
2021-02-08 16:34:18 +01:00
John Audia
9ad912d159 kernel: bump 5.4 to 5.4.92
All modification made by update_kernel.sh in a fresh clone without
existing toolchains.

Build system:       x86_64
Build-tested:       ipq806x/R7800, bcm27xx/bcm2711
Run-tested:         ipq806x/R7800
Compile-tested [*]: ath79/{tiny,generic}, ipq40xx, octeon,
                    ramips/mt7621, realtek, x86/64.
Run-tested [*]:     ath79/generic, octeon, ramips/mt7621, realtek.

No dmesg regressions, everything functional

Signed-off-by: John Audia <graysky@archlinux.us>
Tested-by: Stijn Segers <foss@volatilesystems.org> [*]
2021-01-26 00:49:53 +01:00
John Audia
38bdff29aa kernel: bump 5.4 to 5.4.90
All modification made by update_kernel.sh in a fresh clone without
existing toolchains.

Build system: x86_64
Build-tested: ipq806x/R7800, bcm27xx/bcm2711
Run-tested: ipq806x/R7800

No dmesg regressions, everything functional

Signed-off-by: John Audia <graysky@archlinux.us>
Tested-by: Curtis Deptuck <curtdept@me.com> [x86/64]
2021-01-19 15:39:36 +01:00
John Audia
945a704fab kernel: bump 5.4 to 5.4.89
All modification made by update_kernel.sh in a fresh clone without
existing toolchains.

Build system: x86_64
Build-tested: ipq806x/R7800, bcm27xx/bcm2711
Run-tested: ipq806x/R7800

No dmesg regressions, everything functional

Signed-off-by: John Audia <graysky@archlinux.us>
Tested-by: Curtis Deptuck <curtdept@me.com> [x86/64]
2021-01-15 17:29:41 +01:00
Adrian Schmutzler
9b1b89229f kernel: bump 5.4 to 5.4.86
Removed upstreamed patches:
  pending-5.4/499-mtd-parser-cmdline-Fix-parsing-of-part-names-with-co.patch

Manually merged:
  pending-5.4/611-netfilter_match_bypass_default_table.patch
  layerscape/302-dts-0112-arm64-dts-fsl-ls1028a-prepare-dts-for-overlay.patch

Build-tested: ipq806x/R7800, bcm27xx/bcm2711, ath79/{generic,tiny},
              ipq40xx, octeon, ramips/mt7621, realtek, x86/64
Run-tested: ipq806x/R7800, realtek

Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
Tested-by: John Audia <graysky@archlinux.us>
Tested-by: Stijn Segers <foss@volatilesystems.org>
2021-01-01 17:07:28 +01:00
John Audia
a282a04538 kernel: bump 5.4 to 5.4.85
All modifications made by update_kernel.sh run in a fresh clone
without any existing toolchains.

Build system: x86_64
Build-tested: ipq806x/R7800, ath79/generic, bcm27xx/bcm2711
Run-tested: ipq806x/R7800

No dmesg regressions, everything functional

Signed-off-by: John Audia <graysky@archlinux.us>
2020-12-22 19:11:50 +01:00
Felix Fietkau
6244b0b6c9 kernel: improve skb hash on the mtk ethernet driver
The PPE only provides a 14 bit hash, however many uses of the skb hash
expect the hash to use the full 32 bit range.
Use jhash to extend the hash to the full size

Signed-off-by: Felix Fietkau <nbd@nbd.name>
2020-12-18 18:10:52 +01:00
John Audia
3f165fa7cc kernel: bump 5.4 to 5.4.82
Removed since included upstream and could be reverse-applied by quilt:
  backport-5.4/315-v5.10-usbnet-ipeth-fix-connectivity-with-ios-14.patch

Remaining modifications made by update_kernel.sh

Build system: x86_64
Build-tested: ipq806x/R7800, ath79/generic, bcm27xx/bcm2711
Run-tested: ipq806x/R7800

No dmesg regressions, everything functional

Signed-off-by: John Audia <graysky@archlinux.us>
Tested-by: Curtis Deptuck <curtdept@me.com> [build/run x86_64]
2020-12-09 17:05:40 +01:00
John Audia
4e39949dd1 kernel: bump 5.4 to 5.4.80
Removed since could be reverse-applied by quilt and found to be
included upstream:
  backport-5.4/789-net-usb-qmi_wwan-Set-DTR-quirk-for-MR400.patch

All modifications made by update_kernel.sh

Build system: x86_64
Build-tested: ipq806x/R7800, bcm27xx/bcm2711, ath79/generic
Run-tested: ipq806x/R7800

No dmesg regressions, everything functional

Signed-off-by: John Audia <graysky@archlinux.us>
Tested-by: Curtis Deptuck <curtdept@me.com> [x86_64 build/run]
2020-11-26 11:17:55 +01:00
John Audia
667f6c7f49 kernel: bump 5.4 to 5.4.77
Manually rebased patches:
 bcm27xx/patches-5.4/950-0135-spi-spi-bcm2835-Disable-forced-software-CS.patch
 generic-backport/744-v5.5-net-sfp-soft-status-and-control-support.patch
 layerscape/patches-5.4/819-uart-0005-tty-serial-fsl_lpuart-enable-dma-mode-for-imx8qxp.patch
 mvebu/patches-5.4/521-arm64-dts-marvell-espressobin-Add-ethernet-switch-al.patch

Removed:
 layerscape/patches-5.4/819-uart-0012-tty-serial-lpuart-add-LS1028A-support.patch

All modifications made by update_kernel.sh

Build system: x86_64
Build-tested: ipq806x/R7800, ath79/generic, bcm27xx/bcm2711,
              lantiq/Easybox 904 xDSL, x86_64
Run-tested: ipq806x/R7800, lantiq/Easybox 904 xDSL, x86_64

No dmesg regressions, everything functional

Signed-off-by: John Audia <graysky@archlinux.us>
Co-developed-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
2020-11-18 21:13:46 +01:00
Adrian Schmutzler
7661b83768 mediatek: fix mixed indent in DTS files
mediatek frequently had mixed indent (tabs vs. spaces) in DTS files
and DTS file kernel patches (probably due to careless copy/paste).

The harmonizes these cases to tabs-only, as usual for DTS(I).

Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
2020-11-16 13:43:39 +01:00
Adrian Schmutzler
2658008a2a treewide: remove default-state off for LEDs
default-state = "off" is default for LEDs, no need to specify it
explicitly.

https://www.kernel.org/doc/Documentation/devicetree/bindings/leds/common.yaml

Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
2020-11-16 13:43:39 +01:00
John Audia
a47279154e kernel: bump 5.4 to 5.4.75
Manually rebased patches:
  bcm27xx:
    patches-5.4/950-0267-xhci-add-quirk-for-host-controllers-that-don-t-updat.patch
  bcm53xx:
    patches-5.4/180-usb-xhci-add-support-for-performing-fake-doorbell.patch
  layerscape:
    patches-5.4/802-can-0025-can-flexcan-add-LPSR-mode-support-for-i.MX7D.patch
    patches-5.4/808-i2c-0002-MLK-10893-i2c-imx-add-irqf_no_suspend.patch
    patches-5.4/820-usb-0016-MLK-16735-usb-host-add-XHCI_CDNS_HOST-flag.patch

Removed since could be reverse-applied by quilt:
  mediatek:
    patches-5.4/0700-arm-dts-mt7623-add-missing-pause-for-switchport.patch

All modifications made by update_kernel.sh

Build system: x86_64
Build-tested: ipq806x/R7800, ath79/generic, bcm27xx/bcm2711, x86_64
Run-tested: ipq806x/R7800, x86_64

No dmesg regressions, everything functional

Signed-off-by: John Audia <graysky@archlinux.us>
Tested-by: Curtis Deptuck <curtdept@me.com> [x86_64]

Rebase of 802-can-0025-can-flexcan-add-LPSR-mode-support-for-i.MX7D.patch
Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com>
Signed-off-by: Kevin Darbyshire-Bryant <kevin@darbyshire-bryant.me.uk>
2020-11-10 13:11:32 +01:00
John Audia
b4c02c9998 kernel: bump 5.4 to 5.4.73
Removed upstreamed patches:
 generic/pending-5.4
   445-mtd-spinand-gigadevice-Only-one-dummy-byte-in-QUA.patch
   446-mtd-spinand-gigadevice-Add-QE-Bit.patch
 pistachio/patches-5.4
   150-pwm-img-Fix-null-pointer-access-in-probe.patch

Manually rebased:
 layerscape/patches-5.4
   801-audio-0011-Revert-ASoC-fsl_sai-add-of_match-data.patch
   801-audio-0039-MLK-16224-6-ASoC-fsl_sai-fix-DSD-suspend-resume.patch
   801-audio-0073-MLK-21957-3-ASoC-fsl_sai-add-bitcount-and-timestamp-.patch
   820-usb-0009-usb-dwc3-Add-workaround-for-host-mode-VBUS-glitch-wh.patch

All modifications made by update_kernel.sh

Build system: x86_64
Build-tested: ipq806x/R7800, ath79/generic, bcm27xx/bcm2711,
              mvebu (mamba, rango), x86_64, ramips/mt7621
Run-tested: ipq806x/R7800, mvebu (mamba, rango), x86_64, ramips (RT-AC57U)

No dmesg regressions, everything functional

Signed-off-by: John Audia <graysky@archlinux.us>
[alter 820-usb-0009-usb-dwc3-Add-workaround-for-host-mode-VBUS-glitch-wh]
Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
2020-11-01 14:44:06 +01:00
John Audia
dd20ba98e7 kernel: bump 5.4 to 5.4.72
All modifications made by update_kernel.sh

Build system: x86_64
Build-tested: ipq806x/R7800, ath79/generic, bcm27xx/bcm2711
Run-tested: ipq806x/R7800

No dmesg regressions, everything functional

Signed-off-by: John Audia <graysky@archlinux.us>
2020-10-20 03:01:27 +02:00
Felix Fietkau
b59d5c8f0e mediatek: rewrite flow offload code
The code is now much cleaner and works better than the old code.
Preparation for submitting it upstream (though with a different API)
Also add back MT7621 support and fix flow table coherence issues on
MT7622

Signed-off-by: Felix Fietkau <nbd@nbd.name>
2020-10-16 21:37:39 +02:00
John Audia
0efec6a008 kernel: bump 5.4 to 5.4.71
All modifications made by update_kernel.sh

Build system: x86_64
Build-tested: ipq806x/R7800, ath79/generic, bcm27xx/bcm2711,
              lantiq/Easybox 904 xDSL
Run-tested:   ipq806x/R7800, lantiq/Easybox 904 xDSL

No dmesg regressions, everything functional

Signed-off-by: John Audia <graysky@archlinux.us>
[add lantiq test reports]
Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
2020-10-15 17:46:54 +02:00
John Audia
d6a9a92e32 kernel: bump 5.4 to 5.4.69
Seemingly unneeded based on new upstream code so manually deleted:
 layerscape:
  820-usb-0007-usb-dwc3-gadget-increase-timeout-value-for-send-ep-c.patch

Manually merged:
 generic-hack:
  251-sound_kconfig.patch

All other modifications made by update_kernel.sh

Build system: x86_64
Build-tested: ipq806x/R7800, ath79/generic, bcm27xx/bcm2711
Run-tested: ipq806x/R7800, lantiq/Easybox 904 xDSL

No dmesg regressions, everything functional

Signed-off-by: John Audia <graysky@archlinux.us>
[add lantiq test report, minor commit message clarification]
Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
2020-10-02 22:02:26 +02:00