mirror of
https://github.com/hanwckf/immortalwrt-mt798x.git
synced 2025-01-09 02:43:53 +08:00
Merge Official Source
This commit is contained in:
AmadeusGhost
commit
bb34a95f52
@ -505,7 +505,7 @@ NOTE: this patch is ready for upstream, LEDE-specific parts are in
|
||||
+#endif /* __NSA310_H */
|
||||
--- /dev/null
|
||||
+++ b/configs/nsa310_defconfig
|
||||
@@ -0,0 +1,50 @@
|
||||
@@ -0,0 +1,48 @@
|
||||
+CONFIG_ARM=y
|
||||
+CONFIG_SYS_DCACHE_OFF=y
|
||||
+CONFIG_ARCH_CPU_INIT=y
|
||||
@ -554,8 +554,6 @@ NOTE: this patch is ready for upstream, LEDE-specific parts are in
|
||||
+CONFIG_LZMA=y
|
||||
+CONFIG_LZO=y
|
||||
+CONFIG_SYS_LONGHELP=y
|
||||
+CONFIG_SATA_MV=y
|
||||
+CONFIG_CMD_IDE=y
|
||||
--- /dev/null
|
||||
+++ b/include/configs/nsa310.h
|
||||
@@ -0,0 +1,103 @@
|
||||
|
||||
@ -284,6 +284,7 @@ config MTK_DEFAULT_5G_PROFILE
|
||||
bool "5G default profile for DBDC"
|
||||
depends on MTK_DBDC_MODE
|
||||
# depends on MTK_MULTI_PROFILE_SUPPORT
|
||||
default y if TARGET_ramips_mt7621_DEVICE_phicomm_k2p
|
||||
default n
|
||||
|
||||
config MTK_WSC_INCLUDED
|
||||
|
||||
141
target/linux/ath79/dts/qca9531_compex_wpj531-16m.dts
Normal file
141
target/linux/ath79/dts/qca9531_compex_wpj531-16m.dts
Normal file
@ -0,0 +1,141 @@
|
||||
// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
|
||||
/dts-v1/;
|
||||
|
||||
#include <dt-bindings/gpio/gpio.h>
|
||||
#include <dt-bindings/input/input.h>
|
||||
|
||||
#include "qca953x.dtsi"
|
||||
|
||||
/ {
|
||||
compatible = "compex,wpj531-16m", "qca,qca9531";
|
||||
model = "Compex WPJ531 (16MB flash)";
|
||||
|
||||
aliases {
|
||||
label-mac-device = ð0;
|
||||
led-boot = &led_sig4;
|
||||
led-failsafe = &led_sig4;
|
||||
led-running = &led_sig4;
|
||||
led-upgrade = &led_sig4;
|
||||
};
|
||||
|
||||
beeper {
|
||||
compatible = "gpio-beeper";
|
||||
gpios = <&gpio 4 GPIO_ACTIVE_HIGH>;
|
||||
};
|
||||
|
||||
keys {
|
||||
compatible = "gpio-keys";
|
||||
|
||||
reset {
|
||||
label = "reset";
|
||||
linux,code = <KEY_RESTART>;
|
||||
gpios = <&gpio 17 GPIO_ACTIVE_LOW>;
|
||||
};
|
||||
};
|
||||
|
||||
leds {
|
||||
compatible = "gpio-leds";
|
||||
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&pinmux_led_eth_pins>;
|
||||
|
||||
sig1 {
|
||||
label = "wpj531:red:sig1";
|
||||
gpios = <&gpio 12 GPIO_ACTIVE_LOW>;
|
||||
};
|
||||
|
||||
sig2 {
|
||||
label = "wpj531:yellow:sig2";
|
||||
gpios = <&gpio 14 GPIO_ACTIVE_LOW>;
|
||||
};
|
||||
|
||||
sig3 {
|
||||
label = "wpj531:green:sig3";
|
||||
gpios = <&gpio 15 GPIO_ACTIVE_LOW>;
|
||||
};
|
||||
|
||||
led_sig4: sig4 {
|
||||
label = "wpj531:green:sig4";
|
||||
gpios = <&gpio 16 GPIO_ACTIVE_LOW>;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&uart {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&pinmux {
|
||||
pinmux_led_eth_pins: pinmux_led_eth_pins {
|
||||
pinctrl-single,bits = <0x8 0x2b000000 0xff000000>, <0xc 0x00002d00 0x0000ff00>;
|
||||
};
|
||||
};
|
||||
|
||||
&spi {
|
||||
status = "okay";
|
||||
|
||||
flash@0 {
|
||||
compatible = "jedec,spi-nor";
|
||||
reg = <0>;
|
||||
spi-max-frequency = <25000000>;
|
||||
|
||||
partitions {
|
||||
compatible = "fixed-partitions";
|
||||
#address-cells = <1>;
|
||||
#size-cells = <1>;
|
||||
|
||||
uboot: partition@0 {
|
||||
label = "u-boot";
|
||||
reg = <0x000000 0x030000>;
|
||||
read-only;
|
||||
};
|
||||
|
||||
partition@30000 {
|
||||
label = "firmware";
|
||||
reg = <0x030000 0xfc0000>;
|
||||
compatible = "denx,uimage";
|
||||
};
|
||||
|
||||
art: partition@ff0000 {
|
||||
label = "art";
|
||||
reg = <0xff0000 0x010000>;
|
||||
read-only;
|
||||
};
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
ð1 {
|
||||
mtd-mac-address = <&uboot 0x2e018>;
|
||||
};
|
||||
|
||||
ð0 {
|
||||
status = "okay";
|
||||
|
||||
phy-handle = <&swphy4>;
|
||||
|
||||
mtd-mac-address = <&uboot 0x2e010>;
|
||||
};
|
||||
|
||||
&wmac {
|
||||
status = "okay";
|
||||
|
||||
mtd-cal-data = <&art 0x1000>;
|
||||
};
|
||||
|
||||
&pcie0 {
|
||||
status = "okay";
|
||||
|
||||
wifi@0,0 {
|
||||
compatible = "pci168c,003c";
|
||||
reg = <0x0000 0 0 0 0>;
|
||||
};
|
||||
};
|
||||
|
||||
&usb_phy {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&usb0 {
|
||||
status = "okay";
|
||||
};
|
||||
@ -115,6 +115,13 @@ engenius,ecb1750|\
|
||||
enterasys,ws-ap3705i)
|
||||
ucidef_set_led_netdev "lan" "LAN" "$boardname:blue:lan" "eth0"
|
||||
;;
|
||||
compex,wpj531-16m)
|
||||
ucidef_set_rssimon "wlan0" "200000" "1"
|
||||
ucidef_set_led_rssi "sig1" "SIG1" "wpj531:red:sig1" "wlan0" "85" "100"
|
||||
ucidef_set_led_rssi "sig2" "SIG2" "wpj531:yellow:sig2" "wlan0" "75" "100"
|
||||
ucidef_set_led_rssi "sig3" "SIG3" "wpj531:green:sig3" "wlan0" "65" "100"
|
||||
ucidef_set_led_rssi "sig4" "SIG4" "wpj531:green:sig4" "wlan0" "50" "100"
|
||||
;;
|
||||
devolo,magic-2-wifi)
|
||||
ucidef_set_led_netdev "plcw" "dLAN" "devolo:white:dlan" "eth0.1" "rx"
|
||||
;;
|
||||
|
||||
@ -108,6 +108,7 @@ ath79_setup_interfaces()
|
||||
comfast,cf-e110n-v2|\
|
||||
comfast,cf-e120a-v3|\
|
||||
comfast,cf-e314n-v2|\
|
||||
compex,wpj531-16m|\
|
||||
tplink,cpe210-v1|\
|
||||
tplink,cpe220-v2|\
|
||||
tplink,cpe220-v3|\
|
||||
|
||||
@ -1,14 +1,6 @@
|
||||
DEVICE_VARS += TPLINK_HWID TPLINK_HWREV TPLINK_FLASHLAYOUT TPLINK_HEADER_VERSION
|
||||
DEVICE_VARS += TPLINK_BOARD_ID TPLINK_HWREVADD TPLINK_HVERSION
|
||||
|
||||
define Build/uImageArcher
|
||||
mkimage -A $(LINUX_KARCH) \
|
||||
-O linux -T kernel -C $(1) -a $(KERNEL_LOADADDR) \
|
||||
-e $(if $(KERNEL_ENTRY),$(KERNEL_ENTRY),$(KERNEL_LOADADDR)) \
|
||||
-n '$(call toupper,$(LINUX_KARCH)) OpenWrt Linux-$(LINUX_VERSION)' -d $@ $@.new
|
||||
@mv $@.new $@
|
||||
endef
|
||||
|
||||
define Device/tplink-v1
|
||||
DEVICE_VENDOR := TP-Link
|
||||
TPLINK_HWID := 0x0
|
||||
@ -48,12 +40,14 @@ define Device/tplink-4m
|
||||
$(Device/tplink-nolzma)
|
||||
TPLINK_FLASHLAYOUT := 4M
|
||||
IMAGE_SIZE := 3904k
|
||||
DEFAULT := n
|
||||
endef
|
||||
|
||||
define Device/tplink-4mlzma
|
||||
$(Device/tplink-v1)
|
||||
TPLINK_FLASHLAYOUT := 4Mlzma
|
||||
IMAGE_SIZE := 3904k
|
||||
DEFAULT := n
|
||||
endef
|
||||
|
||||
define Device/tplink-8m
|
||||
@ -86,7 +80,7 @@ endef
|
||||
|
||||
define Device/tplink-safeloader-uimage
|
||||
$(Device/tplink-safeloader)
|
||||
KERNEL := kernel-bin | append-dtb | lzma | uImageArcher lzma
|
||||
KERNEL := kernel-bin | append-dtb | lzma | uImage lzma
|
||||
KERNEL_INITRAMFS := $$(KERNEL)
|
||||
endef
|
||||
|
||||
|
||||
@ -50,6 +50,29 @@ define Build/cybertan-trx
|
||||
-rm $@-empty.bin
|
||||
endef
|
||||
|
||||
define Build/mkmylofw_16m
|
||||
$(eval device_id=$(word 1,$(1)))
|
||||
$(eval revision=$(word 2,$(1)))
|
||||
|
||||
# On WPJ344, WPJ531, and WPJ563, the default boot command tries 0x9f680000
|
||||
# first and fails if the remains of the stock image are sill there
|
||||
# - resulting in an infinite boot loop.
|
||||
# The size parameter is grown to have that block deleted if the firmware
|
||||
# isn't big enough by itself.
|
||||
|
||||
let \
|
||||
size="$$(stat -c%s $@)" \
|
||||
pad="$(subst k,* 1024,$(BLOCKSIZE))" \
|
||||
pad="(pad - (size % pad)) % pad" \
|
||||
newsize='size + pad' ; \
|
||||
[ $$newsize -lt $$((0x660000)) ] && newsize=0x660000 ; \
|
||||
$(STAGING_DIR_HOST)/bin/mkmylofw \
|
||||
-B WPE72 -i 0x11f6:$(device_id):0x11f6:$(device_id) -r $(revision) \
|
||||
-s 0x1000000 -p0x30000:$$newsize:al:0x80060000:"OpenWRT":$@ \
|
||||
$@.new
|
||||
@mv $@.new $@
|
||||
endef
|
||||
|
||||
define Build/mkwrggimg
|
||||
$(STAGING_DIR_HOST)/bin/mkwrggimg -b \
|
||||
-i $@ -o $@.imghdr -d /dev/mtdblock/1 \
|
||||
@ -418,6 +441,22 @@ define Device/comfast_cf-wr752ac-v1
|
||||
endef
|
||||
TARGET_DEVICES += comfast_cf-wr752ac-v1
|
||||
|
||||
define Device/compex_wpj531-16m
|
||||
SOC := qca9531
|
||||
DEVICE_PACKAGES := kmod-usb2
|
||||
IMAGE_SIZE := 16128k
|
||||
DEVICE_VENDOR := Compex
|
||||
DEVICE_MODEL := WPJ531
|
||||
DEVICE_VARIANT := 16M
|
||||
SUPPORTED_DEVICES += wpj531
|
||||
IMAGES += cpximg-7a03.bin cpximg-7a04.bin cpximg-7a06.bin cpximg-7a07.bin
|
||||
IMAGE/cpximg-7a03.bin := append-kernel | pad-to $$$$(BLOCKSIZE) | append-rootfs | pad-rootfs | mkmylofw_16m 0x68a 2
|
||||
IMAGE/cpximg-7a04.bin := append-kernel | pad-to $$$$(BLOCKSIZE) | append-rootfs | pad-rootfs | mkmylofw_16m 0x693 3
|
||||
IMAGE/cpximg-7a06.bin := append-kernel | pad-to $$$$(BLOCKSIZE) | append-rootfs | pad-rootfs | mkmylofw_16m 0x693 3
|
||||
IMAGE/cpximg-7a07.bin := append-kernel | pad-to $$$$(BLOCKSIZE) | append-rootfs | pad-rootfs | mkmylofw_16m 0x693 3
|
||||
endef
|
||||
TARGET_DEVICES += compex_wpj531-16m
|
||||
|
||||
define Device/devolo_dvl1200e
|
||||
SOC := qca9558
|
||||
DEVICE_VENDOR := devolo
|
||||
|
||||
@ -157,6 +157,7 @@ define Device/tplink_tl-wa850re-v2
|
||||
TPLINK_HWID := 0x08500002
|
||||
DEVICE_PACKAGES := rssileds
|
||||
SUPPORTED_DEVICES += tl-wa850re-v2
|
||||
DEFAULT := n
|
||||
endef
|
||||
TARGET_DEVICES += tplink_tl-wa850re-v2
|
||||
|
||||
|
||||
@ -13,6 +13,7 @@ define Device/Default
|
||||
KERNEL_LOADADDR := 0x80208000
|
||||
DEVICE_DTS = $$(SOC)-$(lastword $(subst _, ,$(1)))
|
||||
SUPPORTED_DEVICES := $(subst _,$(comma),$(1))
|
||||
IMAGES := sysupgrade.bin
|
||||
IMAGE/sysupgrade.bin = sysupgrade-tar | append-metadata
|
||||
IMAGE/sysupgrade.bin/squashfs :=
|
||||
endef
|
||||
@ -46,7 +47,7 @@ define Device/DniImage
|
||||
$(call Device/FitzImage)
|
||||
NETGEAR_BOARD_ID :=
|
||||
NETGEAR_HW_ID :=
|
||||
IMAGES := factory.img sysupgrade.bin
|
||||
IMAGES += factory.img
|
||||
IMAGE/factory.img := append-kernel | pad-offset 64k 64 | append-uImage-fakehdr filesystem | append-rootfs | pad-rootfs | netgear-dni
|
||||
IMAGE/sysupgrade.bin := append-kernel | pad-offset 64k 64 | append-uImage-fakehdr filesystem | \
|
||||
append-rootfs | pad-rootfs | append-metadata | check-size
|
||||
@ -110,7 +111,6 @@ define Device/8dev_habanero-dvk
|
||||
IMAGE_SIZE := 30976k
|
||||
SOC := qcom-ipq4019
|
||||
DEVICE_PACKAGES := ipq-wifi-8dev_habanero-dvk
|
||||
IMAGES := sysupgrade.bin
|
||||
IMAGE/sysupgrade.bin := append-kernel | pad-to 64k | append-rootfs | pad-rootfs | append-metadata | check-size
|
||||
endef
|
||||
TARGET_DEVICES += 8dev_habanero-dvk
|
||||
@ -151,7 +151,6 @@ define Device/aruba_glenmorangie
|
||||
DEVICE_VENDOR := Aruba
|
||||
SOC := qcom-ipq4029
|
||||
DEVICE_PACKAGES := ipq-wifi-aruba_ap-303
|
||||
IMAGES := sysupgrade.bin
|
||||
endef
|
||||
|
||||
define Device/aruba_ap-303
|
||||
@ -178,7 +177,6 @@ define Device/asus_map-ac2200
|
||||
DEVICE_VENDOR := ASUS
|
||||
DEVICE_MODEL := Lyra (MAP-AC2200)
|
||||
SOC := qcom-ipq4019
|
||||
IMAGES := sysupgrade.bin
|
||||
DEVICE_PACKAGES := ath10k-firmware-qca9888-ct kmod-ath3k
|
||||
endef
|
||||
TARGET_DEVICES += asus_map-ac2200
|
||||
@ -199,7 +197,6 @@ define Device/asus_rt-ac58u
|
||||
# to add a version... or we are very careful not to add '\0' into that
|
||||
# string and call it a day.... Yeah, we do the latter!
|
||||
UIMAGE_NAME:=$(shell echo -e '\03\01\01\01RT-AC58U')
|
||||
IMAGES := sysupgrade.bin
|
||||
DEVICE_PACKAGES := -kmod-ath10k-ct kmod-ath10k-ct-smallbuffers \
|
||||
kmod-usb-ledtrig-usbport
|
||||
endef
|
||||
@ -214,7 +211,7 @@ define Device/avm_fritzbox-4040
|
||||
IMAGE_SIZE := 29056k
|
||||
UBOOT_PATH := $(STAGING_DIR_IMAGE)/uboot-fritz4040.bin
|
||||
UBOOT_PARTITION_SIZE := 524288
|
||||
IMAGES = eva.bin sysupgrade.bin
|
||||
IMAGES += eva.bin
|
||||
IMAGE/eva.bin := append-uboot | pad-to $$$$(UBOOT_PARTITION_SIZE) | append-kernel | append-rootfs | pad-rootfs
|
||||
IMAGE/sysupgrade.bin := append-kernel | append-rootfs | pad-rootfs | append-metadata | check-size
|
||||
DEVICE_PACKAGES := fritz-tffs fritz-caldata
|
||||
@ -227,7 +224,6 @@ define Device/avm_fritzbox-7530
|
||||
DEVICE_MODEL := FRITZ!Box 7530
|
||||
SOC := qcom-ipq4019
|
||||
DEVICE_PACKAGES := fritz-caldata fritz-tffs-nand
|
||||
IMAGES := sysupgrade.bin
|
||||
endef
|
||||
TARGET_DEVICES += avm_fritzbox-7530
|
||||
|
||||
@ -237,7 +233,6 @@ define Device/avm_fritzrepeater-1200
|
||||
DEVICE_MODEL := FRITZ!Repeater 1200
|
||||
SOC := qcom-ipq4019
|
||||
DEVICE_PACKAGES := fritz-caldata fritz-tffs-nand ipq-wifi-avm_fritzrepeater-1200
|
||||
IMAGES := sysupgrade.bin
|
||||
endef
|
||||
TARGET_DEVICES += avm_fritzrepeater-1200
|
||||
|
||||
@ -247,7 +242,6 @@ define Device/avm_fritzrepeater-3000
|
||||
DEVICE_MODEL := FRITZ!Repeater 3000
|
||||
SOC := qcom-ipq4019
|
||||
DEVICE_PACKAGES := ath10k-firmware-qca9984-ct fritz-caldata fritz-tffs-nand
|
||||
IMAGES := sysupgrade.bin
|
||||
endef
|
||||
TARGET_DEVICES += avm_fritzrepeater-3000
|
||||
|
||||
@ -304,7 +298,7 @@ define Device/compex_wpj428
|
||||
BLOCKSIZE := 64k
|
||||
IMAGE_SIZE := 31232k
|
||||
KERNEL_SIZE := 4096k
|
||||
IMAGES = sysupgrade.bin cpximg-6a04.bin
|
||||
IMAGES += cpximg-6a04.bin
|
||||
IMAGE/sysupgrade.bin := append-kernel | append-rootfs | pad-rootfs | append-metadata
|
||||
IMAGE/cpximg-6a04.bin := append-kernel | append-rootfs | pad-rootfs | mkmylofw_32m 0x8A2 3
|
||||
DEVICE_PACKAGES := kmod-gpio-beeper
|
||||
@ -321,7 +315,7 @@ define Device/dlink_dap-2610
|
||||
WRGG_DEVNAME := /dev/mtdblock/8
|
||||
WRGG_SIGNATURE := wapac30_dkbs_dap2610
|
||||
IMAGE_SIZE := 14080k
|
||||
IMAGES := sysupgrade.bin factory.bin
|
||||
IMAGES += factory.bin
|
||||
# Bootloader expects a special 160 byte header which is added by
|
||||
# wrgg-image.
|
||||
# Factory image size must be larger than 6MB, and size in wrgg header must
|
||||
@ -347,7 +341,6 @@ define Device/engenius_eap1300
|
||||
SOC := qcom-ipq4018
|
||||
KERNEL_SIZE := 5120k
|
||||
IMAGE_SIZE := 25344k
|
||||
IMAGES := sysupgrade.bin
|
||||
IMAGE/sysupgrade.bin := append-kernel | append-rootfs | pad-rootfs | append-metadata
|
||||
endef
|
||||
TARGET_DEVICES += engenius_eap1300
|
||||
@ -371,7 +364,7 @@ define Device/engenius_emd1
|
||||
DEVICE_DTS_CONFIG := config@4
|
||||
SOC := qcom-ipq4018
|
||||
IMAGE_SIZE := 30720k
|
||||
IMAGES := sysupgrade.bin factory.bin
|
||||
IMAGES += factory.bin
|
||||
IMAGE/sysupgrade.bin := append-kernel | append-rootfs | pad-rootfs | append-metadata
|
||||
IMAGE/factory.bin := qsdk-ipq-factory-nor | check-size
|
||||
endef
|
||||
@ -385,7 +378,7 @@ define Device/engenius_emr3500
|
||||
SOC := qcom-ipq4018
|
||||
KERNEL_SIZE := 4096k
|
||||
IMAGE_SIZE := 30720k
|
||||
IMAGES := sysupgrade.bin factory.bin
|
||||
IMAGES += factory.bin
|
||||
IMAGE/sysupgrade.bin := append-kernel | append-rootfs | pad-rootfs | append-metadata
|
||||
IMAGE/factory.bin := qsdk-ipq-factory-nor | check-size
|
||||
endef
|
||||
@ -410,7 +403,7 @@ define Device/engenius_ens620ext
|
||||
IMAGE_SIZE := 21312k
|
||||
KERNEL_SIZE := 5120k
|
||||
FILESYSTEMS := squashfs
|
||||
IMAGES := sysupgrade.bin factory_30.bin factory_35.bin
|
||||
IMAGES += factory_30.bin factory_35.bin
|
||||
IMAGE/sysupgrade.bin := append-kernel | append-rootfs | pad-rootfs | check-size | append-metadata
|
||||
IMAGE/factory_30.bin := append-kernel | pad-to $$$$(KERNEL_SIZE) | append-rootfs | pad-rootfs | check-size | SenaoFW $$$$(PRODUCT_ID) $$$$(FW_VER)
|
||||
IMAGE/factory_35.bin := qsdk-ipq-factory-nor | check-size | SenaoFW $$$$(PRODUCT_ID_NEW) $$$$(FW_VER_NEW)
|
||||
@ -425,7 +418,6 @@ define Device/ezviz_cs-w3-wd1200g-eup
|
||||
DEVICE_DTS_CONFIG := config@4
|
||||
IMAGE_SIZE := 14848k
|
||||
SOC := qcom-ipq4018
|
||||
IMAGES := sysupgrade.bin
|
||||
IMAGE/sysupgrade.bin := append-kernel | append-rootfs | pad-rootfs | \
|
||||
append-metadata
|
||||
DEVICE_PACKAGES := -kmod-ath10k-ct kmod-ath10k-ct-smallbuffers \
|
||||
@ -441,7 +433,6 @@ define Device/glinet_gl-b1300
|
||||
SOC := qcom-ipq4029
|
||||
KERNEL_SIZE := 4096k
|
||||
IMAGE_SIZE := 26624k
|
||||
IMAGES := sysupgrade.bin
|
||||
IMAGE/sysupgrade.bin := append-kernel |append-rootfs | pad-rootfs | append-metadata
|
||||
endef
|
||||
TARGET_DEVICES += glinet_gl-b1300
|
||||
@ -477,7 +468,7 @@ define Device/linksys_ea6350v3
|
||||
KERNEL_SIZE := 3072k
|
||||
IMAGE_SIZE := 37888k
|
||||
UBINIZE_OPTS := -E 5
|
||||
IMAGES := factory.bin sysupgrade.bin
|
||||
IMAGES += factory.bin
|
||||
IMAGE/factory.bin := append-kernel | append-uImage-fakehdr filesystem | pad-to $$$$(KERNEL_SIZE) | append-ubi | linksys-image type=EA6350v3
|
||||
DEVICE_PACKAGES := uboot-envtools
|
||||
endef
|
||||
@ -493,7 +484,7 @@ define Device/linksys_ea8300
|
||||
BLOCKSIZE := 128k
|
||||
PAGESIZE := 2048
|
||||
UBINIZE_OPTS := -E 5 # EOD marks to "hide" factory sig at EOF
|
||||
IMAGES := sysupgrade.bin factory.bin
|
||||
IMAGES += factory.bin
|
||||
IMAGE/factory.bin := append-kernel | pad-to $$$$(KERNEL_SIZE) | append-ubi | linksys-image type=EA8300
|
||||
DEVICE_PACKAGES := uboot-envtools ath10k-firmware-qca9888-ct ipq-wifi-linksys_ea8300 kmod-usb-ledtrig-usbport
|
||||
endef
|
||||
@ -506,7 +497,6 @@ define Device/meraki_mr33
|
||||
SOC := qcom-ipq4029
|
||||
BLOCKSIZE := 128k
|
||||
PAGESIZE := 2048
|
||||
IMAGES = sysupgrade.bin
|
||||
DEVICE_PACKAGES := -swconfig ath10k-firmware-qca9887-ct
|
||||
endef
|
||||
TARGET_DEVICES += meraki_mr33
|
||||
@ -557,7 +547,7 @@ define Device/openmesh_a42
|
||||
BLOCKSIZE := 64k
|
||||
KERNEL = kernel-bin | lzma | fit lzma $$(DTS_DIR)/$$(DEVICE_DTS).dtb | pad-to $$(BLOCKSIZE)
|
||||
IMAGE_SIZE := 15616k
|
||||
IMAGES = factory.bin sysupgrade.bin
|
||||
IMAGES += factory.bin
|
||||
IMAGE/factory.bin := append-rootfs | pad-rootfs | openmesh-image ce_type=A42
|
||||
IMAGE/sysupgrade.bin/squashfs := append-rootfs | pad-rootfs | sysupgrade-tar rootfs=$$$$@ | append-metadata
|
||||
DEVICE_PACKAGES := uboot-envtools
|
||||
@ -573,7 +563,7 @@ define Device/openmesh_a62
|
||||
BLOCKSIZE := 64k
|
||||
KERNEL = kernel-bin | lzma | fit lzma $$(DTS_DIR)/$$(DEVICE_DTS).dtb | pad-to $$(BLOCKSIZE)
|
||||
IMAGE_SIZE := 15552k
|
||||
IMAGES = factory.bin sysupgrade.bin
|
||||
IMAGES += factory.bin
|
||||
IMAGE/factory.bin := append-rootfs | pad-rootfs | openmesh-image ce_type=A62
|
||||
IMAGE/sysupgrade.bin/squashfs := append-rootfs | pad-rootfs | sysupgrade-tar rootfs=$$$$@ | append-metadata
|
||||
DEVICE_PACKAGES := ath10k-firmware-qca9888-ct uboot-envtools
|
||||
@ -620,7 +610,6 @@ define Device/qcom_ap-dk01.1-c1
|
||||
KERNEL_SIZE := 4096k
|
||||
IMAGE_SIZE := 26624k
|
||||
$(call Device/FitImage)
|
||||
IMAGES := sysupgrade.bin
|
||||
IMAGE/sysupgrade.bin := append-kernel | pad-to $$$$(KERNEL_SIZE) | append-rootfs | pad-rootfs | append-metadata
|
||||
endef
|
||||
TARGET_DEVICES += qcom_ap-dk01.1-c1
|
||||
@ -650,7 +639,6 @@ define Device/qxwlan_e2600ac-c1
|
||||
SOC := qcom-ipq4019
|
||||
KERNEL_SIZE := 4096k
|
||||
IMAGE_SIZE := 31232k
|
||||
IMAGES := sysupgrade.bin
|
||||
IMAGE/sysupgrade.bin := append-kernel | append-rootfs | pad-rootfs | append-metadata
|
||||
DEVICE_PACKAGES := ipq-wifi-qxwlan_e2600ac
|
||||
endef
|
||||
@ -679,7 +667,6 @@ define Device/unielec_u4019-32m
|
||||
SOC := qcom-ipq4019
|
||||
KERNEL_SIZE := 4096k
|
||||
IMAGE_SIZE := 31232k
|
||||
IMAGES := sysupgrade.bin
|
||||
IMAGE/sysupgrade.bin := append-kernel | append-rootfs | pad-rootfs | append-metadata
|
||||
endef
|
||||
TARGET_DEVICES += unielec_u4019-32m
|
||||
@ -695,7 +682,7 @@ define Device/zyxel_nbg6617
|
||||
RAS_ROOTFS_SIZE := 19840k
|
||||
RAS_VERSION := "$(VERSION_DIST) $(REVISION)"
|
||||
IMAGE/sysupgrade.bin := append-kernel | append-rootfs | pad-rootfs | append-metadata
|
||||
IMAGES := sysupgrade.bin factory.bin
|
||||
IMAGES += factory.bin
|
||||
# The ZyXEL firmware allows flashing thru the web-gui only when the rootfs is
|
||||
# at least as large as the one of the initial firmware image (not the current
|
||||
# one on the device). This only applies to the Web-UI, the bootlaoder ignores
|
||||
@ -713,7 +700,6 @@ define Device/zyxel_wre6606
|
||||
DEVICE_DTS_CONFIG := config@4
|
||||
SOC := qcom-ipq4018
|
||||
IMAGE_SIZE := 13184k
|
||||
IMAGES := sysupgrade.bin
|
||||
IMAGE/sysupgrade.bin := append-kernel | append-rootfs | pad-rootfs | append-metadata | check-size
|
||||
DEVICE_PACKAGES := -kmod-ath10k-ct kmod-ath10k-ct-smallbuffers
|
||||
endef
|
||||
|
||||
@ -21,6 +21,7 @@ define Device/Default
|
||||
KERNEL_LOADADDR = 0x42208000
|
||||
DEVICE_DTS = $$(SOC)-$(lastword $(subst _, ,$(1)))
|
||||
SUPPORTED_DEVICES := $(subst _,$(comma),$(1))
|
||||
IMAGES := sysupgrade.bin
|
||||
IMAGE/sysupgrade.bin = sysupgrade-tar | append-metadata
|
||||
IMAGE/sysupgrade.bin/squashfs :=
|
||||
endef
|
||||
@ -57,7 +58,7 @@ define Device/DniImage
|
||||
NETGEAR_BOARD_ID :=
|
||||
NETGEAR_HW_ID :=
|
||||
UBINIZE_OPTS := -E 5
|
||||
IMAGES := factory.img sysupgrade.bin
|
||||
IMAGES += factory.img
|
||||
IMAGE/factory.img := append-kernel | pad-offset $$$$(BLOCKSIZE) 64 | append-uImage-fakehdr filesystem | pad-to $$$$(KERNEL_SIZE) | append-ubi | netgear-dni
|
||||
IMAGE/sysupgrade.bin := append-kernel | pad-offset $$$$(BLOCKSIZE) 64 | append-uImage-fakehdr filesystem | sysupgrade-tar kernel=$$$$@ | append-metadata
|
||||
endef
|
||||
@ -67,7 +68,7 @@ define Device/TpSafeImage
|
||||
KERNEL = kernel-bin | append-dtb | uImage none
|
||||
KERNEL_NAME := zImage
|
||||
TPLINK_BOARD_ID :=
|
||||
IMAGES := factory.bin sysupgrade.bin
|
||||
IMAGES += factory.bin
|
||||
IMAGE/factory.bin := append-rootfs | tplink-safeloader factory
|
||||
IMAGE/sysupgrade.bin := append-rootfs | tplink-safeloader sysupgrade | append-metadata
|
||||
endef
|
||||
@ -76,7 +77,7 @@ define Device/ZyXELImage
|
||||
KERNEL_SUFFIX := -uImage
|
||||
KERNEL = kernel-bin | append-dtb | uImage none | pad-to $$(KERNEL_SIZE)
|
||||
KERNEL_NAME := zImage
|
||||
IMAGES := factory.bin sysupgrade.bin
|
||||
IMAGES += factory.bin
|
||||
IMAGE/factory.bin := append-rootfs | pad-rootfs | pad-to $$$$(BLOCKSIZE) | zyxel-ras-image separate-kernel
|
||||
IMAGE/sysupgrade.bin/squashfs := append-rootfs | pad-to $$$$(BLOCKSIZE) | sysupgrade-tar rootfs=$$$$@ | append-metadata
|
||||
endef
|
||||
@ -90,7 +91,6 @@ define Device/buffalo_wxr-2533dhp
|
||||
PAGESIZE := 2048
|
||||
IMAGE_SIZE := 65536k
|
||||
KERNEL_IN_UBI := 1
|
||||
IMAGES := sysupgrade.bin
|
||||
IMAGE/sysupgrade.bin := append-rootfs | buffalo-rootfs-cksum | \
|
||||
sysupgrade-tar rootfs=$$$$@ | append-metadata
|
||||
DEVICE_PACKAGES := ath10k-firmware-qca99x0-ct
|
||||
@ -121,7 +121,7 @@ define Device/linksys_ea8500
|
||||
BOARD_NAME := ea8500
|
||||
SUPPORTED_DEVICES += ea8500
|
||||
UBINIZE_OPTS := -E 5
|
||||
IMAGES := factory.bin sysupgrade.bin
|
||||
IMAGES += factory.bin
|
||||
IMAGE/factory.bin := append-kernel | pad-to $$$$(KERNEL_SIZE) | append-ubi
|
||||
DEVICE_PACKAGES := ath10k-firmware-qca99x0-ct
|
||||
endef
|
||||
@ -134,7 +134,6 @@ define Device/nec_wg2600hp
|
||||
SOC := qcom-ipq8064
|
||||
BLOCKSIZE := 64k
|
||||
BOARD_NAME := wg2600hp
|
||||
IMAGES := sysupgrade.bin
|
||||
IMAGE/sysupgrade.bin := append-kernel | append-rootfs | pad-rootfs | append-metadata
|
||||
DEVICE_PACKAGES := ath10k-firmware-qca99x0-ct
|
||||
endef
|
||||
@ -295,7 +294,6 @@ define Device/tplink_vr2600v
|
||||
BOARD_NAME := vr2600v
|
||||
SUPPORTED_DEVICES += vr2600v
|
||||
DEVICE_PACKAGES := ath10k-firmware-qca99x0-ct
|
||||
IMAGES := sysupgrade.bin
|
||||
IMAGE/sysupgrade.bin := pad-extra 512 | append-kernel | pad-to $$$$(KERNEL_SIZE) | append-rootfs | pad-rootfs | append-metadata
|
||||
endef
|
||||
TARGET_DEVICES += tplink_vr2600v
|
||||
|
||||
@ -30,7 +30,6 @@ mvebu_setup_interfaces()
|
||||
marvell,axp-gp)
|
||||
ucidef_set_interface_lan "eth0 eth1 eth2 eth3"
|
||||
;;
|
||||
solidrun,clearfog-a1|\
|
||||
solidrun,clearfog-pro-a1)
|
||||
# eth0 is standalone ethernet
|
||||
# eth1 is switch
|
||||
|
||||
@ -104,7 +104,6 @@ define Device/Default
|
||||
KERNEL_NAME := zImage
|
||||
KERNEL := kernel-bin | append-dtb | uImage none
|
||||
IMAGES := sysupgrade.bin
|
||||
IMAGE/factory.img := append-kernel | pad-to $$$$(KERNEL_SIZE) | append-ubi | pad-to $$$$(PAGESIZE)
|
||||
IMAGE/sysupgrade.bin := sysupgrade-tar | append-metadata
|
||||
SUPPORTED_DEVICES = $(subst _,$(comma),$(1))
|
||||
UBINIZE_OPTS := -E 5
|
||||
|
||||
@ -55,6 +55,8 @@ define Device/linksys
|
||||
DEVICE_VENDOR := Linksys
|
||||
DEVICE_PACKAGES := kmod-mwlwifi wpad-basic
|
||||
IMAGES += factory.img
|
||||
IMAGE/factory.img := append-kernel | pad-to $$$$(KERNEL_SIZE) | \
|
||||
append-ubi | pad-to $$$$(PAGESIZE)
|
||||
KERNEL_SIZE := 6144k
|
||||
endef
|
||||
|
||||
@ -151,6 +153,8 @@ define Device/marvell_a385-db-ap
|
||||
DEVICE_MODEL := Armada 385 Development Board AP (DB-88F6820-AP)
|
||||
DEVICE_DTS := armada-385-db-ap
|
||||
IMAGES += factory.img
|
||||
IMAGE/factory.img := append-kernel | pad-to $$$$(KERNEL_SIZE) | \
|
||||
append-ubi | pad-to $$$$(PAGESIZE)
|
||||
KERNEL_SIZE := 8192k
|
||||
SUPPORTED_DEVICES += armada-385-db-ap
|
||||
endef
|
||||
|
||||
137
target/linux/ramips/dts/mt7628an_wavlink_wl-wn577a2.dts
Normal file
137
target/linux/ramips/dts/mt7628an_wavlink_wl-wn577a2.dts
Normal file
@ -0,0 +1,137 @@
|
||||
// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
|
||||
/dts-v1/;
|
||||
|
||||
#include <dt-bindings/input/input.h>
|
||||
#include <dt-bindings/gpio/gpio.h>
|
||||
|
||||
#include "mt7628an.dtsi"
|
||||
|
||||
/ {
|
||||
compatible = "wavlink,wl-wn577a2", "maginon,wlr-755", "mediatek,mt7628an-soc";
|
||||
model = "WAVLINK WL-WN577A2";
|
||||
|
||||
aliases {
|
||||
led-boot = &led_wps;
|
||||
led-failsafe = &led_wps;
|
||||
led-running = &led_wps;
|
||||
led-upgrade = &led_wps;
|
||||
};
|
||||
|
||||
keys {
|
||||
compatible = "gpio-keys";
|
||||
|
||||
reset {
|
||||
label = "reset";
|
||||
gpios = <&gpio 43 GPIO_ACTIVE_LOW>;
|
||||
linux,code = <KEY_RESTART>;
|
||||
};
|
||||
|
||||
wps {
|
||||
label = "wps";
|
||||
gpios = <&gpio 38 GPIO_ACTIVE_LOW>;
|
||||
linux,code = <KEY_WPS_BUTTON>;
|
||||
};
|
||||
};
|
||||
|
||||
leds {
|
||||
compatible = "gpio-leds";
|
||||
|
||||
lan {
|
||||
label = "wl-wn577a2:green:lan";
|
||||
gpios = <&gpio 40 GPIO_ACTIVE_LOW>;
|
||||
};
|
||||
|
||||
wan {
|
||||
label = "wl-wn577a2:green:wan";
|
||||
gpios = <&gpio 39 GPIO_ACTIVE_LOW>;
|
||||
};
|
||||
|
||||
led_wps: wps {
|
||||
label = "wl-wn577a2:green:wps";
|
||||
gpios = <&gpio 4 GPIO_ACTIVE_LOW>;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&state_default {
|
||||
gpio {
|
||||
groups = "i2c", "wdt", "p0led_an", "p3led_an", "p4led_an";
|
||||
function = "gpio";
|
||||
};
|
||||
};
|
||||
|
||||
&pcie {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&pcie0 {
|
||||
mt76@0,0 {
|
||||
reg = <0x0000 0 0 0 0>;
|
||||
mediatek,mtd-eeprom = <&factory 0x8000>;
|
||||
ieee80211-freq-limit = <5000000 6000000>;
|
||||
};
|
||||
};
|
||||
|
||||
&spi0 {
|
||||
status = "okay";
|
||||
|
||||
flash@0 {
|
||||
compatible = "jedec,spi-nor";
|
||||
reg = <0>;
|
||||
spi-max-frequency = <40000000>;
|
||||
|
||||
partitions {
|
||||
compatible = "fixed-partitions";
|
||||
#address-cells = <1>;
|
||||
#size-cells = <1>;
|
||||
|
||||
partition@0 {
|
||||
label = "u-boot";
|
||||
reg = <0x0 0x30000>;
|
||||
read-only;
|
||||
};
|
||||
|
||||
partition@30000 {
|
||||
label = "u-boot-env";
|
||||
reg = <0x30000 0x10000>;
|
||||
read-only;
|
||||
};
|
||||
|
||||
factory: partition@40000 {
|
||||
label = "factory";
|
||||
reg = <0x40000 0x10000>;
|
||||
read-only;
|
||||
};
|
||||
|
||||
partition@50000 {
|
||||
compatible = "denx,uimage";
|
||||
label = "firmware";
|
||||
reg = <0x50000 0x7b0000>;
|
||||
};
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&wmac {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
ðernet {
|
||||
mtd-mac-address = <&factory 0x28>;
|
||||
};
|
||||
|
||||
&esw {
|
||||
mediatek,portmap = <0x2f>;
|
||||
};
|
||||
|
||||
&usbphy {
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
&ehci {
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
&ohci {
|
||||
status = "disabled";
|
||||
};
|
||||
@ -556,6 +556,16 @@ define Device/wavlink_wl-wn575a3
|
||||
endef
|
||||
TARGET_DEVICES += wavlink_wl-wn575a3
|
||||
|
||||
define Device/wavlink_wl-wn577a2
|
||||
IMAGE_SIZE := 7872k
|
||||
DEVICE_VENDOR := Wavlink
|
||||
DEVICE_MODEL := WL-WN577A2
|
||||
DEVICE_ALT0_VENDOR := Maginon
|
||||
DEVICE_ALT0_MODEL := WLR-755
|
||||
DEVICE_PACKAGES := kmod-mt76x0e
|
||||
endef
|
||||
TARGET_DEVICES += wavlink_wl-wn577a2
|
||||
|
||||
define Device/widora_neo-16m
|
||||
IMAGE_SIZE := 16064k
|
||||
DEVICE_VENDOR := Widora
|
||||
|
||||
@ -122,6 +122,10 @@ wavlink,wl-wn575a3)
|
||||
ucidef_set_led_rssi "wifi-med" "wifi-med" "$boardname:green:wifi-med" "wlan1" "50" "84"
|
||||
ucidef_set_led_rssi "wifi-high" "wifi-high" "$boardname:green:wifi-high" "wlan1" "85" "100"
|
||||
;;
|
||||
wavlink,wl-wn577a2)
|
||||
ucidef_set_led_switch "lan" "lan" "$boardname:green:lan" "switch0" "0x8"
|
||||
ucidef_set_led_switch "wan" "wan" "$boardname:green:wan" "switch0" "0x10"
|
||||
;;
|
||||
zbtlink,zbt-we1226)
|
||||
set_wifi_led "$boardname:green:wlan"
|
||||
ucidef_set_led_switch "lan1" "LAN1" "$boardname:green:lan1" "switch0" "0x01"
|
||||
|
||||
@ -38,7 +38,8 @@ ramips_setup_interfaces()
|
||||
ucidef_add_switch "switch0" \
|
||||
"0:lan" "1:lan" "2:lan" "3:lan" "4:wan" "6@eth0"
|
||||
;;
|
||||
buffalo,wcr-1166ds)
|
||||
buffalo,wcr-1166ds|\
|
||||
wavlink,wl-wn577a2)
|
||||
ucidef_add_switch "switch0" \
|
||||
"3:lan" "4:wan" "6@eth0"
|
||||
;;
|
||||
@ -186,6 +187,10 @@ ramips_setup_macs()
|
||||
wiznet,wizfi630s)
|
||||
wan_mac=$(macaddr_add "$(mtd_get_mac_binary factory 0x28)" 1)
|
||||
;;
|
||||
wavlink,wl-wn577a2)
|
||||
wan_mac=$(mtd_get_mac_binary factory 0x2e)
|
||||
label_mac=$(mtd_get_mac_binary factory 0x4)
|
||||
;;
|
||||
skylab,skw92a|\
|
||||
totolink,lr1200)
|
||||
wan_mac=$(mtd_get_mac_binary factory 0x2e)
|
||||
|
||||
@ -23,77 +23,77 @@ endef
|
||||
|
||||
define Host/Compile
|
||||
mkdir -p $(HOST_BUILD_DIR)/bin
|
||||
$(call cc,add_header)
|
||||
$(call cc,addpattern)
|
||||
$(call cc,asustrx)
|
||||
$(call cc,lxlfw)
|
||||
$(call cc,trx)
|
||||
$(call cc,otrx)
|
||||
$(call cc,motorola-bin)
|
||||
$(call cc,dgfirmware)
|
||||
$(call cc,mksenaofw md5, -Wall --std=gnu99)
|
||||
$(call cc,trx2usr)
|
||||
$(call cc,ptgen cyg_crc32)
|
||||
$(call cc,srec2bin)
|
||||
$(call cc,mkmylofw)
|
||||
$(call cc,mkcsysimg)
|
||||
$(call cc,mkzynfw)
|
||||
$(call cc,lzma2eva,-lz)
|
||||
$(call cc,mkcasfw)
|
||||
$(call cc,mkfwimage,-lz -Wall -Werror -Wextra -D_FILE_OFFSET_BITS=64)
|
||||
$(call cc,mkfwimage2,-lz)
|
||||
$(call cc,imagetag imagetag_cmdline cyg_crc32)
|
||||
$(call cc,add_header)
|
||||
$(call cc,makeamitbin)
|
||||
$(call cc,encode_crc)
|
||||
$(call cc,nand_ecc)
|
||||
$(call cc,mkplanexfw sha1)
|
||||
$(call cc,mktplinkfw mktplinkfw-lib md5, -Wall -fgnu89-inline)
|
||||
$(call cc,mktplinkfw2 mktplinkfw-lib md5, -fgnu89-inline)
|
||||
$(call cc,tplink-safeloader md5, -Wall --std=gnu99)
|
||||
$(call cc,pc1crypt)
|
||||
$(call cc,osbridge-crc)
|
||||
$(call cc,wrt400n cyg_crc32)
|
||||
$(call cc,mkdniimg)
|
||||
$(call cc,mktitanimg)
|
||||
$(call cc,mkchkimg)
|
||||
$(call cc,mkzcfw cyg_crc32)
|
||||
$(call cc,spw303v)
|
||||
$(call cc,zyxbcm)
|
||||
$(call cc,trx2edips)
|
||||
$(call cc,xorimage)
|
||||
$(call cc,buffalo-enc buffalo-lib,-Wall)
|
||||
$(call cc,buffalo-tag buffalo-lib,-Wall)
|
||||
$(call cc,buffalo-tftp buffalo-lib,-Wall)
|
||||
$(call cc,mkwrgimg md5, -Wall)
|
||||
$(call cc,mkwrggimg md5, -Wall)
|
||||
$(call cc,mkedimaximg)
|
||||
$(call cc,mkbrncmdline)
|
||||
$(call cc,mkbrnimg)
|
||||
$(call cc,mkdapimg)
|
||||
$(call cc,mkdapimg2)
|
||||
$(call cc, mkcameofw, -Wall)
|
||||
$(call cc,seama md5)
|
||||
$(call cc,oseama md5, -Wall)
|
||||
$(call cc,dgfirmware)
|
||||
$(call cc,dgn3500sum,-Wall)
|
||||
$(call cc,dns313-header,-Wall)
|
||||
$(call cc,edimax_fw_header,-Wall)
|
||||
$(call cc,encode_crc)
|
||||
$(call cc,fix-u-media-header cyg_crc32,-Wall)
|
||||
$(call cc,hcsmakeimage bcmalgo)
|
||||
$(call cc,mkporayfw, -Wall)
|
||||
$(call cc,mkrasimage, --std=gnu99)
|
||||
$(call cc,mkhilinkfw, -lcrypto)
|
||||
$(call cc,mkheader_gemtek,-lz)
|
||||
$(call cc,mkrtn56uimg, -lz)
|
||||
$(call cc,dgn3500sum, -Wall)
|
||||
$(call cc,edimax_fw_header, -Wall)
|
||||
$(call cc,mkmerakifw sha1, -Wall)
|
||||
$(call cc,mkmerakifw-old, -Wall)
|
||||
$(call cc,imagetag imagetag_cmdline cyg_crc32)
|
||||
$(call cc,jcgimage,-lz -Wall)
|
||||
$(call cc,lxlfw)
|
||||
$(call cc,lzma2eva,-lz)
|
||||
$(call cc,makeamitbin)
|
||||
$(call cc,mkbrncmdline)
|
||||
$(call cc,mkbrnimg)
|
||||
$(call cc,mkbuffaloimg,-Wall)
|
||||
$(call cc,zyimage, -Wall)
|
||||
$(call cc,mkcameofw,-Wall)
|
||||
$(call cc,mkcasfw)
|
||||
$(call cc,mkchkimg)
|
||||
$(call cc,mkcsysimg)
|
||||
$(call cc,mkdapimg)
|
||||
$(call cc,mkdapimg2)
|
||||
$(call cc,mkdhpimg buffalo-lib,-Wall)
|
||||
$(call cc,mkdlinkfw mkdlinkfw-lib,-lz -Wall --std=c99)
|
||||
$(call cc,dns313-header, -Wall)
|
||||
$(call cc,mkdniimg)
|
||||
$(call cc,mkedimaximg)
|
||||
$(call cc,mkfwimage,-lz -Wall -Werror -Wextra -D_FILE_OFFSET_BITS=64)
|
||||
$(call cc,mkfwimage2,-lz)
|
||||
$(call cc,mkheader_gemtek,-lz)
|
||||
$(call cc,mkhilinkfw,-lcrypto)
|
||||
$(call cc,mkmerakifw sha1,-Wall)
|
||||
$(call cc,mkmerakifw-old,-Wall)
|
||||
$(call cc,mkmylofw)
|
||||
$(call cc,mkplanexfw sha1)
|
||||
$(call cc,mkporayfw,-Wall)
|
||||
$(call cc,mkrasimage,--std=gnu99)
|
||||
$(call cc,mkrtn56uimg,-lz)
|
||||
$(call cc,mksenaofw md5,-Wall --std=gnu99)
|
||||
$(call cc,mksercommfw,-Wall)
|
||||
$(call cc,mktitanimg)
|
||||
$(call cc,mktplinkfw mktplinkfw-lib md5,-Wall -fgnu89-inline)
|
||||
$(call cc,mktplinkfw2 mktplinkfw-lib md5,-fgnu89-inline)
|
||||
$(call cc,mkwrggimg md5,-Wall)
|
||||
$(call cc,mkwrgimg md5,-Wall)
|
||||
$(call cc,mkzcfw cyg_crc32)
|
||||
$(call cc,mkzynfw)
|
||||
$(call cc,motorola-bin)
|
||||
$(call cc,nand_ecc)
|
||||
$(call cc,nec-enc,-Wall --std=gnu99)
|
||||
$(call cc,osbridge-crc)
|
||||
$(call cc,oseama md5,-Wall)
|
||||
$(call cc,otrx)
|
||||
$(call cc,pc1crypt)
|
||||
$(call cc,ptgen cyg_crc32)
|
||||
$(call cc,seama md5)
|
||||
$(call cc,spw303v)
|
||||
$(call cc,srec2bin)
|
||||
$(call cc,tplink-safeloader md5,-Wall --std=gnu99)
|
||||
$(call cc,trx)
|
||||
$(call cc,trx2edips)
|
||||
$(call cc,trx2usr)
|
||||
$(call cc,uimage_padhdr,-Wall -lz)
|
||||
$(call cc,wrt400n cyg_crc32)
|
||||
$(call cc,xorimage)
|
||||
$(call cc,zyimage,-Wall)
|
||||
$(call cc,zyxbcm)
|
||||
endef
|
||||
|
||||
define Host/Install
|
||||
|
||||
Loading…
x
Reference in New Issue
Block a user