Backups/immortalwrt-mt798x
1
0
Fork 0
mirror of https://github.com/hanwckf/immortalwrt-mt798x.git synced 2025-01-09 18:59:13 +08:00
Code Issues Actions Packages Projects Releases Wiki Activity

uqmi: set plmn only if necessary

Browse Source 
Setting the plmn to '0' (auto) will implicitly lead to a (delayed)
network re-registration, which could further lead to some timing
related issues in the qmi proto handler.

On the other hand, if you switch back from manual plmn selection
to auto mode you have to set it to '0', because this setting is
permanently "saved" in the wwan module.

Conclusion:
If plmn is configured, check if it's already set euqally in the module.
If so, do nothing. Otherwise set it.

Signed-off-by: Martin Schiller <ms@dev.tdt.de>
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
This commit is contained in:
Martin Schiller 2019-08-28 07:24:33 +02:00 committed by Daniel Golle
parent bc64b9c32e
commit b4b829fe64
2 changed files with 22 additions and 8 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

2
package/network/utils/uqmi/Makefile
View File

@ -1,7 +1,7 @@
include $(TOPDIR)/rules.mk
PKG_NAME:=uqmi
PKG_RELEASE:=1
PKG_RELEASE:=2
PKG_SOURCE_PROTO:=git
PKG_SOURCE_URL=$(PROJECT_GIT)/project/uqmi.git

28
package/network/utils/uqmi/files/lib/netifd/proto/qmi.sh
View File

@ -30,7 +30,7 @@ proto_qmi_init_config() {
proto_qmi_setup() {
local interface="$1"
local dataformat connstat
local dataformat connstat plmn_mode mcc mnc
local device apn auth username password pincode delay modes pdptype
local profile dhcp dhcpv6 autoconnect plmn timeout mtu $PROTO_DEFAULT_OPTIONS
local ip4table ip6table
@ -152,24 +152,38 @@ proto_qmi_setup() {
esac
fi
[ -n "$plmn" ] && {
local mcc mnc
if [ "$plmn" = 0 ]; then
if [ -n "$plmn" ]; then
json_load "$(uqmi -s -d "$device" --get-plmn)"
json_get_var plmn_mode mode
json_get_vars mcc mnc || {
mcc=0
mnc=0
echo "Setting PLMN to auto"
else
}
if [ "$plmn" = "0" ]; then
if [ "$plmn_mode" != "automatic" ]; then
mcc=0
mnc=0
echo "Setting PLMN to auto"
fi
elif [ "$mcc" -ne "${plmn:0:3}" -o "$mnc" -ne "${plmn:3}" ]; then
mcc=${plmn:0:3}
mnc=${plmn:3}
echo "Setting PLMN to $plmn"
else
mcc=""
mnc=""
fi
fi
if [ -n "$mcc" -a -n "$mnc" ]; then
uqmi -s -d "$device" --set-plmn --mcc "$mcc" --mnc "$mnc" > /dev/null 2>&1 || {
echo "Unable to set PLMN"
proto_notify_error "$interface" PLMN_FAILED
proto_block_restart "$interface"
return 1
}
}
fi
# Cleanup current state if any
uqmi -s -d "$device" --stop-network 0xffffffff --autoconnect > /dev/null 2>&1