Backups/immortalwrt-mt798x
1
0
Fork 0
mirror of https://github.com/hanwckf/immortalwrt-mt798x.git synced 2025-01-10 11:09:57 +08:00
Code Issues Actions Packages Projects Releases Wiki Activity

ipq40xx: Add files for 4.19

Browse Source 
This copies over files from 4.14

Signed-off-by: Robert Marko <robimarko@gmail.com>
This commit is contained in:
Robert Marko 2018-12-18 12:47:57 +01:00 committed by Christian Lamparter
parent e67da34431
commit 96b69c2e9a
16 changed files with 3613 additions and 0 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

215
target/linux/ipq40xx/files-4.19/arch/arm/boot/dts/qcom-ipq4018-a42.dts Normal file
View File

@ -0,0 +1,215 @@
/* Copyright (c) 2015, The Linux Foundation. All rights reserved.
* Copyright (c) 2017, Sven Eckelmann <sven.eckelmann@openmesh.com>
*
* Permission to use, copy, modify, and/or distribute this software for any
* purpose with or without fee is hereby granted, provided that the above
* copyright notice and this permission notice appear in all copies.
*
* THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
* WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
* MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
* ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
* WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
* ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
* OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
*
*/
#include "qcom-ipq4019.dtsi"
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/input/input.h>
#include <dt-bindings/soc/qcom,tcsr.h>
/ {
model = "OpenMesh A42";
compatible = "openmesh,a42", "qcom,ipq4019";
soc {
mdio@90000 {
status = "okay";
};
ess-psgmii@98000 {
status = "okay";
};
tcsr@194b000 {
/* select hostmode */
compatible = "qcom,tcsr";
reg = <0x194b000 0x100>;
qcom,usb-hsphy-mode-select = <TCSR_USB_HSPHY_HOST_MODE>;
status = "okay";
};
tcsr@1949000 {
compatible = "qcom,tcsr";
reg = <0x1949000 0x100>;
qcom,wifi_glb_cfg = <TCSR_WIFI_GLB_CFG>;
};
ess_tcsr@1953000 {
compatible = "qcom,tcsr";
reg = <0x1953000 0x1000>;
qcom,ess-interface-select = <TCSR_ESS_PSGMII>;
};
tcsr@1957000 {
compatible = "qcom,tcsr";
reg = <0x1957000 0x100>;
qcom,wifi_noc_memtype_m0_m2 = <TCSR_WIFI_NOC_MEMTYPE_M0_M2>;
};
usb2: usb2@60f8800 {
status = "okay";
};
crypto@8e3a000 {
status = "okay";
};
watchdog@b017000 {
status = "okay";
};
ess-switch@c000000 {
status = "okay";
};
edma@c080000 {
status = "okay";
};
};
gpio-keys {
compatible = "gpio-keys";
reset {
label = "reset";
gpios = <&tlmm 59 GPIO_ACTIVE_LOW>;
linux,code = <KEY_RESTART>;
};
};
aliases {
led-boot = &power;
led-failsafe = &power;
led-running = &power;
led-upgrade = &power;
};
gpio-leds {
compatible = "gpio-leds";
red {
label = "a42:red:status";
gpios = <&tlmm 0 GPIO_ACTIVE_HIGH>;
linux,default-trigger = "default-off";
};
power: green {
label = "a42:green:status";
gpios = <&tlmm 1 GPIO_ACTIVE_HIGH>;
};
blue {
label = "a42:blue:status";
gpios = <&tlmm 2 GPIO_ACTIVE_HIGH>;
linux,default-trigger = "default-off";
};
};
watchdog {
compatible = "linux,wdt-gpio";
gpios = <&tlmm 5 GPIO_ACTIVE_LOW>;
hw_algo = "toggle";
/* hw_margin_ms is actually 300s but driver limits it to 60s */
hw_margin_ms = <60000>;
always-running;
};
};
&tlmm {
serial_pins: serial_pinmux {
mux {
pins = "gpio60", "gpio61";
function = "blsp_uart0";
bias-disable;
};
};
spi_0_pins: spi_0_pinmux {
pin {
function = "blsp_spi0";
pins = "gpio55", "gpio56", "gpio57";
drive-strength = <12>;
bias-disable;
};
pin_cs {
function = "gpio";
pins = "gpio54";
drive-strength = <2>;
bias-disable;
output-high;
};
};
};
&blsp_dma {
status = "okay";
};
&blsp1_spi1 {
pinctrl-0 = <&spi_0_pins>;
pinctrl-names = "default";
status = "okay";
cs-gpios = <&tlmm 54 GPIO_ACTIVE_HIGH>;
m25p80@0 {
#address-cells = <1>;
#size-cells = <1>;
compatible = "jedec,spi-nor";
reg = <0>;
spi-max-frequency = <24000000>;
/* partitions are passed via bootloader */
};
};
&blsp1_uart1 {
pinctrl-0 = <&serial_pins>;
pinctrl-names = "default";
status = "okay";
};
&cryptobam {
status = "okay";
};
&gmac0 {
qcom,phy_mdio_addr = <4>;
qcom,poll_required = <1>;
qcom,forced_speed = <1000>;
qcom,forced_duplex = <1>;
vlan_tag = <2 0x20>;
};
&gmac1 {
qcom,phy_mdio_addr = <3>;
qcom,poll_required = <1>;
qcom,forced_speed = <1000>;
qcom,forced_duplex = <1>;
vlan_tag = <1 0x10>;
};
&usb2_hs_phy {
status = "okay";
};
&wifi0 {
status = "okay";
qcom,ath10k-calibration-variant = "OM-A42";
};
&wifi1 {
status = "okay";
qcom,ath10k-calibration-variant = "OM-A42";
};

231
target/linux/ipq40xx/files-4.19/arch/arm/boot/dts/qcom-ipq4018-eap1300.dts Normal file
View File

@ -0,0 +1,231 @@
// SPDX-License-Identifier: GPL-2.0-or-later
#include "qcom-ipq4019.dtsi"
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/input/input.h>
#include <dt-bindings/soc/qcom,tcsr.h>
/ {
model = "EnGenius EAP1300";
compatible = "engenius,eap1300", "qcom,ipq4019";
soc {
mdio@90000 {
status = "okay";
};
ess-psgmii@98000 {
status = "okay";
};
tcsr@1949000 {
compatible = "qcom,tcsr";
reg = <0x1949000 0x100>;
qcom,wifi_glb_cfg = <TCSR_WIFI_GLB_CFG>;
};
ess_tcsr@1953000 {
compatible = "qcom,tcsr";
reg = <0x1953000 0x1000>;
qcom,ess-interface-select = <TCSR_ESS_PSGMII>;
};
tcsr@1957000 {
compatible = "qcom,tcsr";
reg = <0x1957000 0x100>;
qcom,wifi_noc_memtype_m0_m2 = <TCSR_WIFI_NOC_MEMTYPE_M0_M2>;
};
crypto@8e3a000 {
status = "okay";
};
watchdog@b017000 {
status = "okay";
};
ess-switch@c000000 {
status = "okay";
};
edma@c080000 {
status = "okay";
};
};
gpio-keys {
compatible = "gpio-keys";
reset {
label = "reset";
gpios = <&tlmm 18 GPIO_ACTIVE_HIGH>;
linux,code = <KEY_RESTART>;
};
};
aliases {
led-boot = &power;
led-failsafe = &power;
led-running = &power;
led-upgrade = &power;
};
gpio-leds {
compatible = "gpio-leds";
power: orange {
label = "eap1300:orange:power";
gpios = <&tlmm 58 GPIO_ACTIVE_LOW>;
};
lan {
label = "eap1300:blue:lan";
gpios = <&tlmm 2 GPIO_ACTIVE_HIGH>;
};
mesh {
label = "eap1300:blue:mesh";
gpios = <&tlmm 1 GPIO_ACTIVE_HIGH>;
};
wlan2g {
label = "eap1300:blue:wlan2g";
gpios = <&tlmm 3 GPIO_ACTIVE_HIGH>;
};
wlan5g {
label = "eap1300:yellow:wlan5g";
gpios = <&tlmm 0 GPIO_ACTIVE_HIGH>;
};
};
};
&tlmm {
serial_pins: serial_pinmux {
mux {
pins = "gpio60", "gpio61";
function = "blsp_uart0";
bias-disable;
};
};
spi_0_pins: spi_0_pinmux {
pin {
function = "blsp_spi0";
pins = "gpio54", "gpio55", "gpio56", "gpio57";
drive-strength = <12>;
bias-disable;
};
pin_cs {
function = "gpio";
pins = "gpio54";
drive-strength = <2>;
bias-disable;
output-high;
};
};
};
&blsp_dma {
status = "okay";
};
&blsp1_spi1 {
pinctrl-0 = <&spi_0_pins>;
pinctrl-names = "default";
status = "okay";
cs-gpios = <&tlmm 54 GPIO_ACTIVE_HIGH>;
m25p80@0 {
compatible = "jedec,spi-nor";
reg = <0>;
spi-max-frequency = <24000000>;
partitions {
compatible = "fixed-partitions";
#address-cells = <1>;
#size-cells = <1>;
partition@0 {
label = "0:SBL1";
reg = <0x00000000 0x00040000>;
read-only;
};
partition1@40000 {
label = "0:MIBIB";
reg = <0x00040000 0x00020000>;
read-only;
};
partition2@60000 {
label = "0:QSEE";
reg = <0x00060000 0x00060000>;
read-only;
};
partition3@c0000 {
label = "0:CDT";
reg = <0x000c0000 0x00010000>;
read-only;
};
partition4@d0000 {
label = "0:DDRPARAMS";
reg = <0x000d0000 0x00010000>;
read-only;
};
partition5@e0000 {
label = "0:APPSBLENV";
reg = <0x000e0000 0x00010000>;
read-only;
};
partition6@f0000 {
label = "0:APPSBL";
reg = <0x000f0000 0x00090000>;
read-only;
};
partition7@180000 {
label = "0:ART";
reg = <0x00180000 0x00010000>;
read-only;
};
partition8@190000 {
compatible = "denx,fit";
label = "firmware";
reg = <0x190000 0x1dc0000>;
};
partition9@1f50000 {
label = "u-boot-env";
reg = <0x01f50000 0x00010000>;
};
partition10@1f60000 {
label = "userconfig";
reg = <0x01f60000 0x000a0000>;
};
};
};
};
&blsp1_uart1 {
pinctrl-0 = <&serial_pins>;
pinctrl-names = "default";
status = "okay";
};
&cryptobam {
status = "okay";
};
&gmac0 {
vlan_tag = <2 0x20>;
};
&gmac1 {
vlan_tag = <1 0x10>;
};
&wifi0 {
status = "okay";
qcom,ath10k-calibration-variant = "EnGenius-EAP1300";
};
&wifi1 {
status = "okay";
qcom,ath10k-calibration-variant = "EnGenius-EAP1300";
};

33
target/linux/ipq40xx/files-4.19/arch/arm/boot/dts/qcom-ipq4018-ex6100v2.dts Normal file
View File

@ -0,0 +1,33 @@
/* Copyright (c) 2015, The Linux Foundation. All rights reserved.
* Copyright (c) 2018, David Bauer <mail@david-bauer.net>
*
* Permission to use, copy, modify, and/or distribute this software for any
* purpose with or without fee is hereby granted, provided that the above
* copyright notice and this permission notice appear in all copies.
*
* THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
* WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
* MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
* ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
* WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
* ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
* OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
*
*/
#include "qcom-ipq4018-ex61x0v2.dtsi"
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/input/input.h>
/ {
model = "Netgear EX6100v2";
compatible = "netgear,ex6100v2", "qcom,ipq4019";
};
&wifi0 {
qcom,ath10k-calibration-variant = "Netgear-EX6100v2";
};
&wifi1 {
qcom,ath10k-calibration-variant = "Netgear-EX6100v2";
};

33
target/linux/ipq40xx/files-4.19/arch/arm/boot/dts/qcom-ipq4018-ex6150v2.dts Normal file
View File

@ -0,0 +1,33 @@
/* Copyright (c) 2015, The Linux Foundation. All rights reserved.
* Copyright (c) 2018, David Bauer <mail@david-bauer.net>
*
* Permission to use, copy, modify, and/or distribute this software for any
* purpose with or without fee is hereby granted, provided that the above
* copyright notice and this permission notice appear in all copies.
*
* THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
* WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
* MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
* ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
* WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
* ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
* OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
*
*/
#include "qcom-ipq4018-ex61x0v2.dtsi"
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/input/input.h>
/ {
model = "Netgear EX6150v2";
compatible = "netgear,ex6150v2", "qcom,ipq4019";
};
&wifi0 {
qcom,ath10k-calibration-variant = "Netgear-EX6150v2";
};
&wifi1 {
qcom,ath10k-calibration-variant = "Netgear-EX6150v2";
};

307
target/linux/ipq40xx/files-4.19/arch/arm/boot/dts/qcom-ipq4018-ex61x0v2.dtsi Normal file
View File

@ -0,0 +1,307 @@
/* Copyright (c) 2015, The Linux Foundation. All rights reserved.
* Copyright (c) 2018, David Bauer <mail@david-bauer.net>
*
* Permission to use, copy, modify, and/or distribute this software for any
* purpose with or without fee is hereby granted, provided that the above
* copyright notice and this permission notice appear in all copies.
*
* THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
* WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
* MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
* ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
* WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
* ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
* OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
*
*/
#include "qcom-ipq4019.dtsi"
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/input/input.h>
#include <dt-bindings/soc/qcom,tcsr.h>
/ {
model = "Netgear EX61X0v2";
compatible = "netgear,ex61x0v2", "qcom,ipq4019";
soc {
mdio@90000 {
status = "okay";
};
ess-psgmii@98000 {
status = "okay";
};
tcsr@1949000 {
compatible = "qcom,tcsr";
reg = <0x1949000 0x100>;
qcom,wifi_glb_cfg = <TCSR_WIFI_GLB_CFG>;
};
ess_tcsr@1953000 {
compatible = "qcom,tcsr";
reg = <0x1953000 0x1000>;
qcom,ess-interface-select = <TCSR_ESS_PSGMII>;
};
tcsr@1957000 {
compatible = "qcom,tcsr";
reg = <0x1957000 0x100>;
qcom,wifi_noc_memtype_m0_m2 = <TCSR_WIFI_NOC_MEMTYPE_M0_M2>;
};
crypto@8e3a000 {
status = "okay";
};
watchdog@b017000 {
status = "okay";
};
ess-switch@c000000 {
status = "okay";
};
edma@c080000 {
status = "okay";
qcom,num_gmac = <1>;
};
};
aliases {
led-boot = &power_amber;
led-failsafe = &power_amber;
led-running = &power_green;
led-upgrade = &power_amber;
};
gpio-keys {
compatible = "gpio-keys";
wps {
label = "wps";
gpios = <&tlmm 0 GPIO_ACTIVE_LOW>;
linux,code = <KEY_WPS_BUTTON>;
};
reset {
label = "reset";
gpios = <&tlmm 63 GPIO_ACTIVE_LOW>;
linux,code = <KEY_RESTART>;
};
};
led_spi {
compatible = "spi-gpio";
#address-cells = <1>;
#size-cells = <0>;
gpio-sck = <&tlmm 5 GPIO_ACTIVE_HIGH>;
gpio-mosi = <&tlmm 4 GPIO_ACTIVE_HIGH>;
num-chipselects = <0>;
led_gpio: led_gpio@0 {
compatible = "fairchild,74hc595";
reg = <0>;
gpio-controller;
#gpio-cells = <2>;
registers-number = <1>;
spi-max-frequency = <1000000>;
};
};
gpio-leds {
compatible = "gpio-leds";
power_amber: power_amber {
label = "ex61x0v2:amber:power";
gpios = <&led_gpio 7 GPIO_ACTIVE_LOW>;
};
power_green: power_green {
label = "ex61x0v2:green:power";
gpios = <&led_gpio 6 GPIO_ACTIVE_LOW>;
};
right {
label = "ex61x0v2:blue:right";
gpios = <&led_gpio 5 GPIO_ACTIVE_LOW>;
};
left {
label = "ex61x0v2:blue:left";
gpios = <&led_gpio 4 GPIO_ACTIVE_LOW>;
};
client_green {
label = "ex61x0v2:green:client";
gpios = <&led_gpio 3 GPIO_ACTIVE_LOW>;
};
client_red {
label = "ex61x0v2:red:client";
gpios = <&led_gpio 2 GPIO_ACTIVE_LOW>;
};
router_green {
label = "ex61x0v2:green:router";
gpios = <&led_gpio 1 GPIO_ACTIVE_LOW>;
};
router_red {
label = "ex61x0v2:red:router";
gpios = <&led_gpio 0 GPIO_ACTIVE_LOW>;
};
wps {
label = "ex61x0v2:green:wps";
gpios = <&tlmm 1 GPIO_ACTIVE_LOW>;
};
};
};
&tlmm {
serial_pins: serial_pinmux {
mux {
pins = "gpio60", "gpio61";
function = "blsp_uart0";
bias-disable;
};
};
spi_0_pins: spi_0_pinmux {
pin {
function = "blsp_spi0";
pins = "gpio55", "gpio56", "gpio57";
drive-strength = <12>;
bias-disable;
};
pin_cs {
function = "gpio";
pins = "gpio54";
drive-strength = <2>;
bias-disable;
output-high;
};
};
};
&blsp1_spi1 {
pinctrl-0 = <&spi_0_pins>;
pinctrl-names = "default";
status = "okay";
cs-gpios = <&tlmm 54 GPIO_ACTIVE_HIGH>;
mx25l12805d@0 {
compatible = "jedec,spi-nor";
reg = <0>;
spi-max-frequency = <24000000>;
partitions {
compatible = "fixed-partitions";
#address-cells = <1>;
#size-cells = <1>;
partition0@0 {
label = "SBL1";
reg = <0x00000000 0x00040000>;
read-only;
};
partition1@40000 {
label = "MIBIB";
reg = <0x00040000 0x00020000>;
read-only;
};
partition2@60000 {
label = "QSEE";
reg = <0x00060000 0x00060000>;
read-only;
};
partition3@c0000 {
label = "CDT";
reg = <0x000c0000 0x00010000>;
read-only;
};
partition4@d0000 {
label = "DDRPARAMS";
reg = <0x000d0000 0x00010000>;
read-only;
};
partition5@E0000 {
label = "APPSBLENV";
reg = <0x000e0000 0x00010000>;
read-only;
};
partition6@F0000 {
label = "APPSBL";
reg = <0x000f0000 0x00080000>;
read-only;
};
partition7@170000 {
label = "ART";
reg = <0x00170000 0x00010000>;
read-only;
};
partition8@180000 {
label = "config";
reg = <0x00180000 0x00010000>;
read-only;
};
partition9@190000 {
label = "pot";
reg = <0x00190000 0x00010000>;
read-only;
};
partition10@1a0000 {
label = "dnidata";
reg = <0x001a0000 0x00010000>;
read-only;
};
partition11@1b0000 {
compatible = "denx,fit";
label = "firmware";
reg = <0x001b0000 0x00e10000>;
};
partition12@fc0000 {
label = "language";
reg = <0x00fc0000 0x00040000>;
read-only;
};
};
};
};
&blsp1_uart1 {
pinctrl-0 = <&serial_pins>;
pinctrl-names = "default";
status = "okay";
};
&blsp_dma {
status = "okay";
};
&cryptobam {
status = "okay";
};
&wifi0 {
status = "okay";
};
&wifi1 {
status = "okay";
};

289
target/linux/ipq40xx/files-4.19/arch/arm/boot/dts/qcom-ipq4018-fritz4040.dts Normal file
View File

@ -0,0 +1,289 @@
// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
#include "qcom-ipq4019.dtsi"
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/input/input.h>
#include <dt-bindings/soc/qcom,tcsr.h>
/ {
model = "AVM FRITZ!Box 4040";
compatible = "avm,fritzbox-4040", "qcom,ipq4019";
aliases {
led-boot = &power;
led-failsafe = &flash;
led-running = &power;
led-upgrade = &flash;
};
soc {
mdio@90000 {
status = "okay";
};
ess-psgmii@98000 {
status = "okay";
};
tcsr@1949000 {
compatible = "qcom,tcsr";
reg = <0x1949000 0x100>;
qcom,wifi_glb_cfg = <TCSR_WIFI_GLB_CFG>;
};
tcsr@194b000 {
compatible = "qcom,tcsr";
reg = <0x194b000 0x100>;
qcom,usb-hsphy-mode-select = <TCSR_USB_HSPHY_HOST_MODE>;
};
ess_tcsr@1953000 {
compatible = "qcom,tcsr";
reg = <0x1953000 0x1000>;
qcom,ess-interface-select = <TCSR_ESS_PSGMII>;
};
tcsr@1957000 {
compatible = "qcom,tcsr";
reg = <0x1957000 0x100>;
qcom,wifi_noc_memtype_m0_m2 = <TCSR_WIFI_NOC_MEMTYPE_M0_M2>;
};
usb2@60f8800 {
status = "okay";
};
usb3@8af8800 {
status = "okay";
};
crypto@8e3a000 {
status = "okay";
};
watchdog@b017000 {
status = "okay";
};
qca8075: ess-switch@c000000 {
status = "okay";
#gpio-cells = <2>;
gpio-controller;
enable-usb-power {
gpio-hog;
line-name = "enable USB3 power";
gpios = <7 GPIO_ACTIVE_HIGH>;
output-high;
};
};
edma@c080000 {
status = "okay";
};
};
keys {
compatible = "gpio-keys";
wlan {
label = "wlan";
gpios = <&tlmm 58 GPIO_ACTIVE_LOW>;
linux,code = <KEY_RFKILL>;
};
wps {
label = "wps";
gpios = <&tlmm 63 GPIO_ACTIVE_LOW>;
linux,code = <KEY_WPS_BUTTON>;
};
};
switch-leds {
compatible = "gpio-leds";
wlan {
label = "fritz4040:green:wlan";
gpios = <&qca8075 1 GPIO_ACTIVE_HIGH>;
};
panic: info_red {
label = "fritz4040:red:info";
gpios = <&qca8075 3 GPIO_ACTIVE_HIGH>;
panic-indicator;
};
wan {
label = "fritz4040:green:wan";
gpios = <&qca8075 5 GPIO_ACTIVE_HIGH>;
};
power: power {
label = "fritz4040:green:power";
gpios = <&qca8075 11 GPIO_ACTIVE_HIGH>;
};
lan {
label = "fritz4040:green:lan";
gpios = <&qca8075 13 GPIO_ACTIVE_HIGH>;
};
flash: info_amber {
label = "fritz4040:amber:info";
gpios = <&qca8075 15 GPIO_ACTIVE_HIGH>;
};
};
};
&tlmm {
serial_pins: serial_pinmux {
mux {
pins = "gpio60", "gpio61";
function = "blsp_uart0";
bias-disable;
};
};
spi_0_pins: spi_0_pinmux {
mux {
function = "blsp_spi0";
pins = "gpio55", "gpio56", "gpio57";
drive-strength = <12>;
bias-disable;
};
mux_cs {
function = "gpio";
pins = "gpio54";
drive-strength = <2>;
bias-disable;
output-high;
};
};
};
&cryptobam {
status = "okay";
};
&blsp_dma {
status = "okay";
};
&blsp1_spi1 { /* BLSP1 QUP1 */
pinctrl-0 = <&spi_0_pins>;
pinctrl-names = "default";
status = "okay";
cs-gpios = <&tlmm 54 GPIO_ACTIVE_HIGH>;
flash@0 {
compatible = "jedec,spi-nor";
#address-cells = <1>;
#size-cells = <0>;
reg = <0>;
spi-max-frequency = <24000000>;
status = "okay";
m25p,fast-read;
partitions {
compatible = "fixed-partitions";
#address-cells = <1>;
#size-cells = <1>;
partition0@0 {
label = "SBL1";
reg = <0x00000000 0x00040000>;
read-only;
};
partition1@40000 {
label = "MIBIB";
reg = <0x00040000 0x00020000>;
read-only;
};
partition2@60000 {
label = "QSEE";
reg = <0x00060000 0x00060000>;
read-only;
};
partition3@c0000 {
label = "CDT";
reg = <0x000c0000 0x00010000>;
read-only;
};
partition4@d0000 {
label = "DDRPARAMS";
reg = <0x000d0000 0x00010000>;
read-only;
};
partition5@e0000 {
label = "APPSBLENV"; /* uboot env - empty */
reg = <0x000e0000 0x00010000>;
read-only;
};
partition6@f0000 {
label = "urlader"; /* APPSBL */
reg = <0x000f0000 0x0002dc000>;
read-only;
};
partition7@11dc00 {
/* make a backup of this partition! */
label = "urlader_config";
reg = <0x0011dc00 0x00002400>;
read-only;
};
partition8@120000 {
label = "tffs1";
reg = <0x00120000 0x00080000>;
read-only;
};
partition9@1a0000 {
label = "tffs2";
reg = <0x001a0000 0x00080000>;
read-only;
};
partition10@220000 {
label = "uboot";
reg = <0x00220000 0x00080000>;
read-only;
};
partition11@2A0000 {
compatible = "denx,fit";
label = "firmware";
reg = <0x002a0000 0x01c60000>;
};
partition12@1f00000 {
label = "jffs2";
reg = <0x01f00000 0x00100000>;
};
};
};
};
&blsp1_uart1 {
pinctrl-0 = <&serial_pins>;
pinctrl-names = "default";
status = "okay";
};
&usb3_ss_phy {
status = "okay";
};
&usb3_hs_phy {
status = "okay";
};
&usb2_hs_phy {
status = "okay";
};
&wifi0 {
status = "okay";
qcom,ath10k-calibration-variant = "AVM-FRITZBox-4040";
};
&wifi1 {
status = "okay";
qcom,ath10k-calibration-variant = "AVM-FRITZBox-4040";
};

266
target/linux/ipq40xx/files-4.19/arch/arm/boot/dts/qcom-ipq4018-jalapeno.dts Normal file
View File

@ -0,0 +1,266 @@
/* Copyright (c) 2015, The Linux Foundation. All rights reserved.
* Copyright (c) 2018, Robert Marko <robimarko@gmail.com>
*
* Permission to use, copy, modify, and/or distribute this software for any
* purpose with or without fee is hereby granted, provided that the above
* copyright notice and this permission notice appear in all copies.
*
* THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
* WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
* MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
* ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
* WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
* ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
* OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
*
*/
#include "qcom-ipq4019.dtsi"
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/input/input.h>
#include <dt-bindings/soc/qcom,tcsr.h>
/ {
model = "8devices Jalapeno";
compatible = "8dev,jalapeno", "qcom,ipq4019";
soc {
mdio@90000 {
status = "okay";
pinctrl-0 = <&mdio_pins>;
pinctrl-names = "default";
};
ess-psgmii@98000 {
status = "okay";
};
counter@4a1000 {
compatible = "qcom,qca-gcnt";
reg = <0x4a1000 0x4>;
};
tcsr@1949000 {
compatible = "qcom,tcsr";
reg = <0x1949000 0x100>;
qcom,wifi_glb_cfg = <TCSR_WIFI_GLB_CFG>;
};
tcsr@194b000 {
/* select hostmode */
compatible = "qcom,tcsr";
reg = <0x194b000 0x100>;
qcom,usb-hsphy-mode-select = <TCSR_USB_HSPHY_HOST_MODE>;
status = "okay";
};
ess_tcsr@1953000 {
compatible = "qcom,tcsr";
reg = <0x1953000 0x1000>;
qcom,ess-interface-select = <TCSR_ESS_PSGMII>;
};
tcsr@1957000 {
compatible = "qcom,tcsr";
reg = <0x1957000 0x100>;
qcom,wifi_noc_memtype_m0_m2 = <TCSR_WIFI_NOC_MEMTYPE_M0_M2>;
};
usb2: usb2@60f8800 {
status = "okay";
};
usb3: usb3@8af8800 {
status = "okay";
};
crypto@8e3a000 {
status = "okay";
};
watchdog@b017000 {
status = "okay";
};
ess-switch@c000000 {
status = "okay";
switch_lan_bmp = <0x10>; /* lan port bitmap */
};
edma@c080000 {
status = "okay";
};
};
};
&tlmm {
mdio_pins: mdio_pinmux {
pinmux_1 {
pins = "gpio53";
function = "mdio";
};
pinmux_2 {
pins = "gpio52";
function = "mdc";
};
pinconf {
pins = "gpio52", "gpio53";
bias-pull-up;
};
};
serial_pins: serial_pinmux {
mux {
pins = "gpio60", "gpio61";
function = "blsp_uart0";
bias-disable;
};
};
spi_0_pins: spi_0_pinmux {
pin {
function = "blsp_spi0";
pins = "gpio55", "gpio56", "gpio57";
drive-strength = <2>;
bias-disable;
};
pin_cs {
function = "gpio";
pins = "gpio54", "gpio59";
drive-strength = <2>;
bias-disable;
output-high;
};
};
};
&blsp_dma {
status = "okay";
};
&blsp1_spi1 {
pinctrl-0 = <&spi_0_pins>;
pinctrl-names = "default";
cs-gpios = <&tlmm 54 GPIO_ACTIVE_HIGH>, <&tlmm 59 GPIO_ACTIVE_HIGH>;
status = "okay";
m25p80@0 {
#address-cells = <1>;
#size-cells = <0>;
reg = <0>;
compatible = "jedec,spi-nor";
spi-max-frequency = <24000000>;
partitions {
compatible = "fixed-partitions";
#address-cells = <1>;
#size-cells = <1>;
partition0@0 {
label = "SBL1";
reg = <0x00000000 0x00040000>;
read-only;
};
partition1@40000 {
label = "MIBIB";
reg = <0x00040000 0x00020000>;
read-only;
};
partition2@60000 {
label = "QSEE";
reg = <0x00060000 0x00060000>;
read-only;
};
partition3@c0000 {
label = "CDT";
reg = <0x000c0000 0x00010000>;
read-only;
};
partition4@d0000 {
label = "DDRPARAMS";
reg = <0x000d0000 0x00010000>;
read-only;
};
partition5@e0000 {
label = "APPSBLENV"; /* uboot env*/
reg = <0x000e0000 0x00010000>;
read-only;
};
partition5@f0000 {
label = "APPSBL"; /* uboot */
reg = <0x000f0000 0x00080000>;
read-only;
};
partition5@170000 {
label = "ART";
reg = <0x00170000 0x00010000>;
read-only;
};
};
};
mt29f@1 {
status = "okay";
#address-cells = <1>;
#size-cells = <0>;
compatible = "spinand,mt29f", "w25n01gv";
reg = <1>;
spi-max-frequency = <24000000>;
partitions {
compatible = "fixed-partitions";
#address-cells = <1>;
#size-cells = <1>;
partition0@0 {
label = "ubi";
reg = <0x00000000 0x08000000>;
};
};
};
};
&blsp1_uart1 {
pinctrl-0 = <&serial_pins>;
pinctrl-names = "default";
status = "okay";
};
&cryptobam {
status = "okay";
};
&gmac0 {
qcom,poll_required = <1>;
qcom,poll_required_dynamic = <1>;
qcom,phy_mdio_addr = <3>;
vlan_tag = <1 0x10>;
};
&gmac1 {
qcom,poll_required = <1>;
qcom,poll_required_dynamic = <1>;
qcom,phy_mdio_addr = <4>;
vlan_tag = <2 0x20>;
};
&wifi0 {
status = "okay";
qcom,ath10k-calibration-variant = "8devices-Jalapeno";
};
&wifi1 {
status = "okay";
qcom,ath10k-calibration-variant = "8devices-Jalapeno";
};
&usb3_ss_phy {
status = "okay";
};
&usb3_hs_phy {
status = "okay";
};
&usb2_hs_phy {
status = "okay";
};

308
target/linux/ipq40xx/files-4.19/arch/arm/boot/dts/qcom-ipq4018-nbg6617.dts Normal file
View File

@ -0,0 +1,308 @@
// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
#include "qcom-ipq4019.dtsi"
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/input/input.h>
#include <dt-bindings/input/linux-event-codes.h>
#include <dt-bindings/soc/qcom,tcsr.h>
/ {
model = "ZyXEL NBG6617";
compatible = "zyxel,nbg6617", "qcom,ipq4019";
chosen {
/*
* the vendor u-boot adds root and mtdparts cmdline parameters
* which we don't want... but we have to overwrite them or else
* the kernel will take them at face value.
*/
bootargs-append = " mtdparts= root=31:13";
};
aliases {
led-boot = &power;
led-failsafe = &power;
led-running = &power;
led-upgrade = &power;
};
soc {
mdio@90000 {
status = "okay";
};
ess-psgmii@98000 {
status = "okay";
};
tcsr@1949000 {
compatible = "qcom,tcsr";
reg = <0x1949000 0x100>;
qcom,wifi_glb_cfg = <TCSR_WIFI_GLB_CFG>;
};
tcsr@194b000 {
compatible = "qcom,tcsr";
reg = <0x194b000 0x100>;
qcom,usb-hsphy-mode-select = <TCSR_USB_HSPHY_HOST_MODE>;
};
ess_tcsr@1953000 {
compatible = "qcom,tcsr";
reg = <0x1953000 0x1000>;
qcom,ess-interface-select = <TCSR_ESS_PSGMII>;
};
tcsr@1957000 {
compatible = "qcom,tcsr";
reg = <0x1957000 0x100>;
qcom,wifi_noc_memtype_m0_m2 = <TCSR_WIFI_NOC_MEMTYPE_M0_M2>;
};
usb2@60f8800 {
status = "okay";
};
usb3@8af8800 {
status = "okay";
};
crypto@8e3a000 {
status = "okay";
};
watchdog@b017000 {
status = "okay";
};
ess-switch@c000000 {
status = "okay";
};
edma@c080000 {
status = "okay";
};
};
keys {
compatible = "gpio-keys";
wlan {
label = "wlan";
gpios = <&tlmm 2 GPIO_ACTIVE_HIGH>;
linux,code = <KEY_RFKILL>;
linux,input-type = <EV_SW>;
};
wps {
label = "wps";
gpios = <&tlmm 63 GPIO_ACTIVE_LOW>;
linux,code = <KEY_WPS_BUTTON>;
};
reset {
label = "reset";
gpios = <&tlmm 4 GPIO_ACTIVE_LOW>;
linux,code = <KEY_RESTART>;
};
};
leds {
compatible = "gpio-leds";
pinctrl-0 = <&led_pins>;
pinctrl-names = "default";
power: power {
label = "nbg6617:green:power";
gpios = <&tlmm 3 GPIO_ACTIVE_HIGH>;
};
usb {
label = "nbg6617:green:usb";
gpios = <&tlmm 0 GPIO_ACTIVE_HIGH>;
};
wlan2G {
label = "nbg6617:green:wlan2G";
gpios = <&tlmm 58 GPIO_ACTIVE_HIGH>;
};
wlan5G {
label = "nbg6617:green:wlan5G";
gpios = <&tlmm 5 GPIO_ACTIVE_HIGH>;
};
wps {
label = "nbg6617:green:wps";
gpios = <&tlmm 1 GPIO_ACTIVE_HIGH>;
};
};
};
&tlmm {
serial_pins: serial_pinmux {
mux {
pins = "gpio60", "gpio61";
function = "blsp_uart0";
bias-disable;
};
};
spi_0_pins: spi_0_pinmux {
mux {
function = "blsp_spi0";
pins = "gpio55", "gpio56", "gpio57";
drive-strength = <12>;
bias-disable;
};
mux_cs {
function = "gpio";
pins = "gpio54";
drive-strength = <2>;
bias-disable;
output-low;
};
};
led_pins: led_pinmux {
mux {
pins = "gpio0", "gpio1", "gpio3", "gpio5", "gpio58";
drive-strength = <0x8>;
bias-disable;
output-low;
};
};
};
&blsp1_spi1 { /* BLSP1 QUP1 */
pinctrl-0 = <&spi_0_pins>;
pinctrl-names = "default";
status = "okay";
cs-gpios = <&tlmm 54 GPIO_ACTIVE_HIGH>;
mx25l25635f@0 {
compatible = "mx25l25635f", "jedec,spi-nor";
#address-cells = <1>;
#size-cells = <0>;
reg = <0>;
spi-max-frequency = <24000000>;
status = "okay";
m25p,fast-read;
partitions {
compatible = "fixed-partitions";
#address-cells = <1>;
#size-cells = <1>;
partition0@0 {
label = "SBL1";
reg = <0x00000000 0x00040000>;
read-only;
};
partition1@40000 {
label = "MIBIB";
reg = <0x00040000 0x00020000>;
read-only;
};
partition2@60000 {
label = "QSEE";
reg = <0x00060000 0x00060000>;
read-only;
};
partition3@c0000 {
label = "CDT";
reg = <0x000c0000 0x00010000>;
read-only;
};
partition4@d0000 {
label = "DDRPARAMS";
reg = <0x000d0000 0x00010000>;
read-only;
};
partition5@e0000 {
label = "APPSBL"; /* u-boot */
reg = <0x000e0000 0x00080000>;
/* U-Boot Standalone App "zloader" is located at 0x64000 */
read-only;
};
partition6@160000 {
label = "APPSBLENV"; /* u-boot env */
reg = <0x00160000 0x00010000>;
};
partition7@170000 {
/* make a backup of this partition! */
label = "ART";
reg = <0x00170000 0x00010000>;
read-only;
};
partition8@180000 {
label = "kernel";
reg = <0x00180000 0x00400000>;
};
partition9@580000 {
label = "dualflag";
reg = <0x00580000 0x00010000>;
read-only;
};
partition10@590000 {
label = "header";
reg = <0x00590000 0x00010000>;
};
partition11@5a0000 {
label = "romd";
reg = <0x005a0000 0x00100000>;
read-only;
};
partition12@6a0000 {
label = "not_root_data";
/*
* for some strange reason, someone at ZyXEL
* had the "great" idea to put the rootfs_data
* in front of rootfs... Don't do that!
* As a result this one, full MebiByte remains
* unused.
*/
reg = <0x006a0000 0x00100000>;
};
partition13@7a0000 {
label = "rootfs";
reg = <0x007a0000 0x01860000>;
};
};
};
};
&blsp1_uart1 {
pinctrl-0 = <&serial_pins>;
pinctrl-names = "default";
status = "okay";
};
&cryptobam {
status = "okay";
};
&blsp_dma {
status = "okay";
};
&wifi0 {
status = "okay";
qcom,ath10k-calibration-variant = "ZyXEL-NBG6617";
};
&wifi1 {
status = "okay";
qcom,ath10k-calibration-variant = "ZyXEL-NBG6617";
};
&usb3_ss_phy {
status = "okay";
};
&usb3_hs_phy {
status = "okay";
};
&usb2_hs_phy {
status = "okay";
};

293
target/linux/ipq40xx/files-4.19/arch/arm/boot/dts/qcom-ipq4018-rt-ac58u.dts Normal file
View File

@ -0,0 +1,293 @@
// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
#include "qcom-ipq4019.dtsi"
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/input/input.h>
#include <dt-bindings/soc/qcom,tcsr.h>
/ {
model = "ASUS RT-AC58U";
compatible = "asus,rt-ac58u", "qcom,ipq4019";
memory {
device_type = "memory";
reg = <0x80000000 0x8000000>;
};
aliases {
led-boot = &power;
led-failsafe = &power;
led-running = &power;
led-upgrade = &power;
};
chosen {
bootargs-append = " ubi.mtd=UBI_DEV";
};
soc {
mdio@90000 {
status = "okay";
};
ess-psgmii@98000 {
status = "okay";
};
tcsr@1949000 {
compatible = "qcom,tcsr";
reg = <0x1949000 0x100>;
qcom,wifi_glb_cfg = <TCSR_WIFI_GLB_CFG>;
};
tcsr@194b000 {
compatible = "qcom,tcsr";
reg = <0x194b000 0x100>;
qcom,usb-hsphy-mode-select = <TCSR_USB_HSPHY_HOST_MODE>;
};
ess_tcsr@1953000 {
compatible = "qcom,tcsr";
reg = <0x1953000 0x1000>;
qcom,ess-interface-select = <TCSR_ESS_PSGMII>;
};
tcsr@1957000 {
compatible = "qcom,tcsr";
reg = <0x1957000 0x100>;
qcom,wifi_noc_memtype_m0_m2 = <TCSR_WIFI_NOC_MEMTYPE_M0_M2>;
};
usb2@60f8800 {
status = "okay";
};
usb3@8af8800 {
status = "okay";
};
crypto@8e3a000 {
status = "okay";
};
wifi@a000000 {
status = "okay";
qcom,ath10k-calibration-variant = "RT-AC58U";
};
wifi@a800000 {
status = "okay";
qcom,ath10k-calibration-variant = "RT-AC58U";
};
watchdog@b017000 {
status = "okay";
};
ess-switch@c000000 {
status = "okay";
};
edma@c080000 {
status = "okay";
};
};
gpio-keys {
compatible = "gpio-keys";
reset {
label = "reset";
gpios = <&tlmm 4 GPIO_ACTIVE_LOW>;
linux,code = <KEY_RESTART>;
};
wps {
label = "wps";
gpios = <&tlmm 63 GPIO_ACTIVE_LOW>;
linux,code = <KEY_WPS_BUTTON>;
};
};
gpio-leds {
compatible = "gpio-leds";
power: status {
label = "rt-ac58u:blue:status";
gpios = <&tlmm 3 GPIO_ACTIVE_HIGH>;
};
wan {
label = "rt-ac58u:blue:wan";
gpios = <&tlmm 1 GPIO_ACTIVE_HIGH>;
};
wlan2G {
label = "rt-ac58u:blue:wlan2G";
gpios = <&tlmm 58 GPIO_ACTIVE_HIGH>;
};
wan5G {
label = "rt-ac58u:blue:wlan5G";
gpios = <&tlmm 5 GPIO_ACTIVE_HIGH>;
};
usb {
label = "rt-ac58u:blue:usb";
gpios = <&tlmm 0 GPIO_ACTIVE_HIGH>;
};
lan {
label = "rt-ac58u:blue:lan";
gpios = <&tlmm 2 GPIO_ACTIVE_HIGH>;
};
};
};
&cryptobam {
status = "okay";
};
&blsp_dma {
status = "okay";
};
&tlmm {
serial_pins: serial_pinmux {
mux {
pins = "gpio60", "gpio61";
function = "blsp_uart0";
bias-disable;
};
};
spi_0_pins: spi_0_pinmux {
mux {
function = "blsp_spi0";
pins = "gpio55", "gpio56", "gpio57";
drive-strength = <12>;
bias-disable;
};
mux_cs {
function = "gpio";
pins = "gpio54", "gpio59";
drive-strength = <2>;
bias-disable;
output-high;
};
};
};
&blsp1_spi1 { /* BLSP1 QUP1 */
pinctrl-0 = <&spi_0_pins>;
pinctrl-names = "default";
status = "okay";
cs-gpios = <&tlmm 54 GPIO_ACTIVE_HIGH>,
<&tlmm 59 GPIO_ACTIVE_HIGH>;
flash@0 {
#address-cells = <1>;
#size-cells = <0>;
/*
* U-boot looks for "n25q128a11" node,
* if we don't have it, it will spit out the following warning:
* "ipq: fdt fixup unable to find compatible node".
*/
compatible = "jedec,spi-nor";
reg = <0>;
linux,modalias = "m25p80", "mx25l1606e", "n25q128a11";
spi-max-frequency = <24000000>;
partitions {
compatible = "fixed-partitions";
#address-cells = <1>;
#size-cells = <1>;
partition0@0 {
label = "SBL1";
reg = <0x00000000 0x00040000>;
read-only;
};
partition1@40000 {
label = "MIBIB";
reg = <0x00040000 0x00020000>;
read-only;
};
partition2@60000 {
label = "QSEE";
reg = <0x00060000 0x00060000>;
read-only;
};
partition3@c0000 {
label = "CDT";
reg = <0x000c0000 0x00010000>;
read-only;
};
partition4@d0000 {
label = "DDRPARAMS";
reg = <0x000d0000 0x00010000>;
read-only;
};
partition5@e0000 {
label = "APPSBLENV"; /* uboot env*/
reg = <0x000e0000 0x00010000>;
read-only;
};
partition5@f0000 {
label = "APPSBL"; /* uboot */
reg = <0x000f0000 0x00080000>;
read-only;
};
partition5@170000 {
label = "ART";
reg = <0x00170000 0x00010000>;
read-only;
};
/* 0x00180000 - 0x00200000 unused */
};
};
flash@1 {
#address-cells = <1>;
#size-cells = <0>;
compatible = "spinand,mt29f";
reg = <1>;
spi-max-frequency = <24000000>;
/*
* U-boot looks for "spinand,mt29f" node,
* if we don't have it, it will spit out the following warning:
* "ipq: fdt fixup unable to find compatible node".
*/
partitions {
compatible = "fixed-partitions";
#address-cells = <1>;
#size-cells = <1>;
partition@0 {
label = "ubi";
reg = <0x00000000 0x08000000>;
};
};
};
};
&blsp1_uart1 {
pinctrl-0 = <&serial_pins>;
pinctrl-names = "default";
status = "okay";
};
&usb3_ss_phy {
status = "okay";
};
&usb3_hs_phy {
status = "okay";
};
&usb2_hs_phy {
status = "okay";
};

261
target/linux/ipq40xx/files-4.19/arch/arm/boot/dts/qcom-ipq4018-wre6606.dts Normal file
View File

@ -0,0 +1,261 @@
/* Copyright (c) 2015, The Linux Foundation. All rights reserved.
* Copyright (c) 2018, David Bauer <mail@david-bauer.net>
*
* Permission to use, copy, modify, and/or distribute this software for any
* purpose with or without fee is hereby granted, provided that the above
* copyright notice and this permission notice appear in all copies.
*
* THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
* WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
* MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
* ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
* WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
* ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
* OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
*
*/
#include "qcom-ipq4019.dtsi"
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/input/input.h>
#include <dt-bindings/soc/qcom,tcsr.h>
/ {
model = "ZyXEL WRE6606";
compatible = "zyxel,wre6606", "qcom,ipq4019";
aliases {
led-boot = &power;
led-failsafe = &power;
led-running = &power;
led-upgrade = &power;
};
chosen {
bootargs-append = " mtdparts=";
};
soc {
mdio@90000 {
status = "okay";
};
ess-psgmii@98000 {
status = "okay";
};
tcsr@1949000 {
compatible = "qcom,tcsr";
reg = <0x1949000 0x100>;
qcom,wifi_glb_cfg = <TCSR_WIFI_GLB_CFG>;
};
ess_tcsr@1953000 {
compatible = "qcom,tcsr";
reg = <0x1953000 0x1000>;
qcom,ess-interface-select = <TCSR_ESS_PSGMII>;
};
tcsr@1957000 {
compatible = "qcom,tcsr";
reg = <0x1957000 0x100>;
qcom,wifi_noc_memtype_m0_m2 = <TCSR_WIFI_NOC_MEMTYPE_M0_M2>;
};
crypto@8e3a000 {
status = "okay";
};
watchdog@b017000 {
status = "okay";
};
ess-switch@c000000 {
status = "okay";
};
edma@c080000 {
status = "okay";
qcom,num_gmac = <1>;
};
};
gpio-leds {
compatible = "gpio-leds";
wps {
label = "wre6606:green:wps";
gpios = <&tlmm 1 GPIO_ACTIVE_HIGH>;
};
wlan5g_green {
label = "wre6606:green:wlan5g";
gpios = <&tlmm 3 GPIO_ACTIVE_HIGH>;
};
power: power {
label = "wre6606:green:power";
gpios = <&tlmm 4 GPIO_ACTIVE_HIGH>;
};
wlan5g_red {
label = "wre6606:red:wlan5g";
gpios = <&tlmm 5 GPIO_ACTIVE_HIGH>;
};
wlan2g_red {
label = "wre6606:red:wlan2g";
gpios = <&tlmm 58 GPIO_ACTIVE_HIGH>;
};
wlan2g_green {
label = "wre6606:green:wlan2g";
gpios = <&tlmm 59 GPIO_ACTIVE_HIGH>;
};
};
gpio-keys {
compatible = "gpio-keys";
wps {
label = "wps";
gpios = <&tlmm 63 GPIO_ACTIVE_LOW>;
linux,code = <KEY_WPS_BUTTON>;
};
};
};
&tlmm {
serial_pins: serial_pinmux {
mux {
pins = "gpio60", "gpio61";
function = "blsp_uart0";
bias-disable;
};
};
spi_0_pins: spi_0_pinmux {
pin {
function = "blsp_spi0";
pins = "gpio55", "gpio56", "gpio57";
drive-strength = <12>;
bias-disable;
};
pin_cs {
function = "gpio";
pins = "gpio54";
drive-strength = <2>;
bias-disable;
output-high;
};
};
};
&blsp_dma {
status = "okay";
};
&blsp1_spi1 {
pinctrl-0 = <&spi_0_pins>;
pinctrl-names = "default";
status = "okay";
cs-gpios = <&tlmm 54 GPIO_ACTIVE_HIGH>;
mx25l12805d@0 {
compatible = "jedec,spi-nor";
reg = <0>;
spi-max-frequency = <24000000>;
partitions {
compatible = "fixed-partitions";
#address-cells = <1>;
#size-cells = <1>;
partition0@0 {
label = "SBL1";
reg = <0x00000000 0x00040000>;
read-only;
};
partition1@40000 {
label = "MIBIB";
reg = <0x00040000 0x00020000>;
read-only;
};
partition2@60000 {
label = "QSEE";
reg = <0x00060000 0x00060000>;
read-only;
};
partition3@c0000 {
label = "CDT";
reg = <0x000c0000 0x00010000>;
read-only;
};
partition4@d0000 {
label = "DDRPARAMS";
reg = <0x000d0000 0x00010000>;
read-only;
};
partition5@E0000 {
label = "APPSBLENV";
reg = <0x000e0000 0x00010000>;
read-only;
};
partition6@F0000 {
label = "APPSBL";
reg = <0x000f0000 0x00080000>;
read-only;
};
partition7@170000 {
label = "ART";
reg = <0x00170000 0x00010000>;
read-only;
};
partition8@180000 {
compatible = "denx,fit";
label = "firmware";
reg = <0x00180000 0x00ce0000>;
};
partition9@e60000 {
label = "manufacture";
reg = <0x00e60000 0x00050000>;
read-only;
};
partition10@eb0000 {
label = "storage";
reg = <0x00eb0000 0x00150000>;
read-only;
};
};
};
};
&blsp1_uart1 {
pinctrl-0 = <&serial_pins>;
pinctrl-names = "default";
status = "okay";
};
&cryptobam {
status = "okay";
};
&wifi0 {
status = "okay";
qcom,ath10k-calibration-variant = "ZyXEL-WRE6606";
};
&wifi1 {
status = "okay";
qcom,ath10k-calibration-variant = "ZyXEL-WRE6606";
};

239
target/linux/ipq40xx/files-4.19/arch/arm/boot/dts/qcom-ipq4019-a62.dts Normal file
View File

@ -0,0 +1,239 @@
/* Copyright (c) 2015, The Linux Foundation. All rights reserved.
* Copyright (c) 2017-2018, Sven Eckelmann <sven.eckelmann@openmesh.com>
*
* Permission to use, copy, modify, and/or distribute this software for any
* purpose with or without fee is hereby granted, provided that the above
* copyright notice and this permission notice appear in all copies.
*
* THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
* WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
* MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
* ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
* WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
* ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
* OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
*
*/
#include "qcom-ipq4019.dtsi"
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/input/input.h>
#include <dt-bindings/soc/qcom,tcsr.h>
/ {
model = "OpenMesh A62";
compatible = "openmesh,a62", "qcom,ipq4019";
soc {
mdio@90000 {
status = "okay";
};
ess-psgmii@98000 {
status = "okay";
};
tcsr@194b000 {
/* select hostmode */
compatible = "qcom,tcsr";
reg = <0x194b000 0x100>;
qcom,usb-hsphy-mode-select = <TCSR_USB_HSPHY_HOST_MODE>;
status = "okay";
};
tcsr@1949000 {
compatible = "qcom,tcsr";
reg = <0x1949000 0x100>;
qcom,wifi_glb_cfg = <TCSR_WIFI_GLB_CFG>;
};
ess_tcsr@1953000 {
compatible = "qcom,tcsr";
reg = <0x1953000 0x1000>;
qcom,ess-interface-select = <TCSR_ESS_PSGMII>;
};
tcsr@1957000 {
compatible = "qcom,tcsr";
reg = <0x1957000 0x100>;
qcom,wifi_noc_memtype_m0_m2 = <TCSR_WIFI_NOC_MEMTYPE_M0_M2>;
};
usb2: usb2@60f8800 {
status = "okay";
};
crypto@8e3a000 {
status = "okay";
};
watchdog@b017000 {
status = "okay";
};
ess-switch@c000000 {
switch_lan_bmp = <0x10>;
switch_wan_bmp = <0x20>;
status = "okay";
};
edma@c080000 {
status = "okay";
};
};
gpio-keys {
compatible = "gpio-keys";
reset {
label = "reset";
gpios = <&tlmm 18 GPIO_ACTIVE_LOW>;
linux,code = <KEY_RESTART >;
};
};
aliases {
led-boot = &power;
led-failsafe = &power;
led-running = &power;
led-upgrade = &power;
};
gpio-leds {
compatible = "gpio-leds";
red {
label = "a62:red:status";
gpios = <&tlmm 43 GPIO_ACTIVE_HIGH>;
linux,default-trigger = "default-off";
};
power: green {
label = "a62:green:status";
gpios = <&tlmm 45 GPIO_ACTIVE_HIGH>;
};
blue {
label = "a62:blue:status";
gpios = <&tlmm 46 GPIO_ACTIVE_HIGH>;
linux,default-trigger = "default-off";
};
};
watchdog {
compatible = "linux,wdt-gpio";
gpios = <&tlmm 59 GPIO_ACTIVE_LOW>;
hw_algo = "toggle";
/* hw_margin_ms is actually 300s but driver limits it to 60s */
hw_margin_ms = <60000>;
always-running;
};
};
&tlmm {
serial_pins: serial_pinmux {
mux {
pins = "gpio16", "gpio17";
function = "blsp_uart0";
bias-disable;
};
};
spi_0_pins: spi_0_pinmux {
pin {
function = "blsp_spi0";
pins = "gpio13", "gpio14", "gpio15";
drive-strength = <12>;
bias-disable;
};
pin_cs {
function = "gpio";
pins = "gpio12";
drive-strength = <2>;
bias-disable;
output-high;
};
};
enable-usb-power {
gpio-hog;
gpios = <58 GPIO_ACTIVE_HIGH>;
output-low;
line-name = "enable USB2 power";
};
};
&blsp_dma {
status = "okay";
};
&blsp1_spi1 {
pinctrl-0 = <&spi_0_pins>;
pinctrl-names = "default";
status = "okay";
cs-gpios = <&tlmm 12 GPIO_ACTIVE_HIGH>;
m25p80@0 {
#address-cells = <1>;
#size-cells = <1>;
compatible = "jedec,spi-nor";
reg = <0>;
spi-max-frequency = <24000000>;
/* partitions are passed via bootloader */
};
};
&blsp1_uart1 {
pinctrl-0 = <&serial_pins>;
pinctrl-names = "default";
status = "okay";
};
&cryptobam {
status = "okay";
};
&gmac0 {
qcom,phy_mdio_addr = <3>;
qcom,poll_required = <1>;
qcom,forced_speed = <1000>;
qcom,forced_duplex = <1>;
vlan_tag = <1 0x10>;
};
&usb2_hs_phy {
status = "okay";
};
&pcie0 {
status = "okay";
perst-gpio = <&tlmm 38 GPIO_ACTIVE_LOW>;
wake-gpio = <&tlmm 50 GPIO_ACTIVE_LOW>;
bridge@0,0 {
reg = <0x00000000 0 0 0 0>;
#address-cells = <3>;
#size-cells = <2>;
ranges;
wifi2: wifi@0,0 {
compatible = "qcom,ath10k";
status = "okay";
reg = <0x00010000 0 0 0 0>;
qcom,ath10k-calibration-variant = "OM-A62";
ieee80211-freq-limit = <5170000 5350000>;
};
};
};
&wifi0 {
status = "okay";
qcom,ath10k-calibration-variant = "OM-A62";
};
&wifi1 {
status = "okay";
qcom,ath10k-calibration-variant = "OM-A62";
ieee80211-freq-limit = <5470000 5875000>;
};

21
target/linux/ipq40xx/files-4.19/arch/arm/boot/dts/qcom-ipq4019-ap.dk04.1-c1.dts Normal file
View File

@ -0,0 +1,21 @@
/* Copyright (c) 2015, The Linux Foundation. All rights reserved.
*
* Permission to use, copy, modify, and/or distribute this software for any
* purpose with or without fee is hereby granted, provided that the above
* copyright notice and this permission notice appear in all copies.
*
* THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
* WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
* MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
* ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
* WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
* ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
* OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
*
*/
#include "qcom-ipq4019-ap.dk04.1.dtsi"
/ {
model = "Qualcomm Technologies, Inc. IPQ40xx/AP-DK04.1-C1";
};

177
target/linux/ipq40xx/files-4.19/arch/arm/boot/dts/qcom-ipq4019-ap.dk04.1.dtsi Normal file
View File

@ -0,0 +1,177 @@
/* Copyright (c) 2015, The Linux Foundation. All rights reserved.
*
* Permission to use, copy, modify, and/or distribute this software for any
* purpose with or without fee is hereby granted, provided that the above
* copyright notice and this permission notice appear in all copies.
*
* THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
* WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
* MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
* ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
* WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
* ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
* OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
*
*/
#include "qcom-ipq4019.dtsi"
#include <dt-bindings/gpio/gpio.h>
/ {
model = "Qualcomm Technologies, Inc. IPQ4019/AP-DK04.1";
compatible = "qcom,ipq4019";
soc {
pinctrl@1000000 {
serial_0_pins: serial_pinmux {
mux {
pins = "gpio16", "gpio17";
function = "blsp_uart0";
bias-disable;
};
};
serial_1_pins: serial1_pinmux {
mux {
pins = "gpio8", "gpio9";
function = "blsp_uart1";
bias-disable;
};
};
spi_0_pins: spi_0_pinmux {
pinmux {
function = "blsp_spi0";
pins = "gpio13", "gpio14", "gpio15";
};
pinmux_cs {
function = "gpio";
pins = "gpio12";
};
pinconf {
pins = "gpio13", "gpio14", "gpio15";
drive-strength = <12>;
bias-disable;
};
pinconf_cs {
pins = "gpio12";
drive-strength = <2>;
bias-disable;
output-high;
};
};
i2c_0_pins: i2c_0_pinmux {
pinmux {
function = "blsp_i2c0";
pins = "gpio10", "gpio11";
};
pinconf {
pins = "gpio10", "gpio11";
drive-strength = <16>;
bias-disable;
};
};
nand_pins: nand_pins {
pullups {
pins = "gpio52", "gpio53", "gpio58",
"gpio59";
function = "qpic";
bias-pull-up;
};
pulldowns {
pins = "gpio54", "gpio55", "gpio56",
"gpio57", "gpio60", "gpio61",
"gpio62", "gpio63", "gpio64",
"gpio65", "gpio66", "gpio67",
"gpio68", "gpio69";
function = "qpic";
bias-pull-down;
};
};
};
blsp_dma: dma@7884000 {
status = "okay";
};
spi0: spi@78b5000 {
pinctrl-0 = <&spi_0_pins>;
pinctrl-names = "default";
status = "okay";
cs-gpios = <&tlmm 12 GPIO_ACTIVE_HIGH>;
mx25l25635e@0 {
#address-cells = <1>;
#size-cells = <1>;
reg = <0>;
compatible = "mx25l25635e";
spi-max-frequency = <24000000>;
};
};
i2c0: i2c@78b7000 { /* BLSP1 QUP2 */
pinctrl-0 = <&i2c_0_pins>;
pinctrl-names = "default";
status = "okay";
};
serial@78af000 {
pinctrl-0 = <&serial_0_pins>;
pinctrl-names = "default";
status = "okay";
};
serial@78b0000 {
pinctrl-0 = <&serial_1_pins>;
pinctrl-names = "default";
status = "okay";
};
usb3_ss_phy: ssphy@9a000 {
status = "okay";
};
usb3_hs_phy: hsphy@a6000 {
status = "okay";
};
usb3: usb3@8af8800 {
status = "okay";
};
usb2_hs_phy: hsphy@a8000 {
status = "okay";
};
usb2: usb2@60f8800 {
status = "okay";
};
cryptobam: dma@8e04000 {
status = "okay";
};
crypto@8e3a000 {
status = "okay";
};
watchdog@b017000 {
status = "okay";
};
qpic_bam: dma@7984000 {
status = "okay";
};
nand: qpic-nand@79b0000 {
pinctrl-0 = <&nand_pins>;
pinctrl-names = "default";
status = "okay";
};
};
};

268
target/linux/ipq40xx/files-4.19/arch/arm/boot/dts/qcom-ipq4028-wpj428.dts Normal file
View File

@ -0,0 +1,268 @@
/* Copyright (c) 2015, The Linux Foundation. All rights reserved.
* Copyright (c) 2017, Christian Mehlis <christian@m3hlis.de>
* Copyright (c) 2017-2018, Sven Eckelmann <sven.eckelmann@openmesh.com>
*
* Permission to use, copy, modify, and/or distribute this software for any
* purpose with or without fee is hereby granted, provided that the above
* copyright notice and this permission notice appear in all copies.
*
* THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
* WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
* MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
* ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
* WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
* ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
* OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
*
*/
#include "qcom-ipq4019.dtsi"
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/input/input.h>
#include <dt-bindings/soc/qcom,tcsr.h>
/ {
model = "Compex WPJ428";
compatible = "compex,wpj428", "qcom,ipq4019";
soc {
mdio@90000 {
status = "okay";
};
ess-psgmii@98000 {
status = "okay";
};
tcsr@194b000 {
/* select hostmode */
compatible = "qcom,tcsr";
reg = <0x194b000 0x100>;
qcom,usb-hsphy-mode-select = <TCSR_USB_HSPHY_HOST_MODE>;
status = "okay";
};
tcsr@1949000 {
compatible = "qcom,tcsr";
reg = <0x1949000 0x100>;
qcom,wifi_glb_cfg = <TCSR_WIFI_GLB_CFG>;
};
ess_tcsr@1953000 {
compatible = "qcom,tcsr";
reg = <0x1953000 0x1000>;
qcom,ess-interface-select = <TCSR_ESS_PSGMII>;
};
tcsr@1957000 {
compatible = "qcom,tcsr";
reg = <0x1957000 0x100>;
qcom,wifi_noc_memtype_m0_m2 = <TCSR_WIFI_NOC_MEMTYPE_M0_M2>;
};
usb2: usb2@60f8800 {
status = "okay";
};
usb3: usb3@8af8800 {
status = "okay";
};
crypto@8e3a000 {
status = "okay";
};
watchdog@b017000 {
status = "okay";
};
ess-switch@c000000 {
switch_lan_bmp = <0x10>;
switch_wan_bmp = <0x20>;
status = "okay";
};
edma@c080000 {
status = "okay";
};
};
gpio-keys {
compatible = "gpio-keys";
reset {
label = "reset";
gpios = <&tlmm 63 GPIO_ACTIVE_LOW>;
linux,code = <KEY_RESTART>;
};
};
aliases {
led-boot = &status;
led-failsafe = &status;
led-upgrade = &status;
};
gpio-leds {
compatible = "gpio-leds";
status: rss4 {
label = "wpj428:green:rss4";
gpios = <&tlmm 5 GPIO_ACTIVE_HIGH>;
};
rss3 {
label = "wpj428:green:rss3";
gpios = <&tlmm 4 GPIO_ACTIVE_HIGH>;
};
};
beeper: beeper {
compatible = "gpio-beeper";
gpios = <&tlmm 58 GPIO_ACTIVE_HIGH>;
};
};
&tlmm {
serial_pins: serial_pinmux {
mux {
pins = "gpio60", "gpio61";
function = "blsp_uart0";
bias-disable;
};
};
spi_0_pins: spi_0_pinmux {
pin {
function = "blsp_spi0";
pins = "gpio55", "gpio56", "gpio57";
drive-strength = <12>;
bias-disable;
};
pin_cs {
function = "gpio";
pins = "gpio54";
drive-strength = <2>;
bias-disable;
output-high;
};
};
};
&blsp_dma {
status = "okay";
};
&blsp1_spi1 {
pinctrl-0 = <&spi_0_pins>;
pinctrl-names = "default";
status = "okay";
cs-gpios = <&tlmm 54 GPIO_ACTIVE_HIGH>;
m25p80@0 {
#address-cells = <1>;
#size-cells = <1>;
compatible = "jedec,spi-nor";
reg = <0>;
spi-max-frequency = <24000000>;
partitions {
compatible = "fixed-partitions";
#address-cells = <1>;
#size-cells = <1>;
partition0@0 {
label = "0:SBL1";
reg = <0x00000000 0x00040000>;
read-only;
};
partition1@40000 {
label = "0:MIBIB";
reg = <0x00040000 0x00020000>;
read-only;
};
partition2@60000 {
label = "0:QSEE";
reg = <0x00060000 0x00060000>;
read-only;
};
partition3@c0000 {
label = "0:CDT";
reg = <0x000c0000 0x00010000>;
read-only;
};
partition4@d0000 {
label = "0:DDRPARAMS";
reg = <0x000d0000 0x00010000>;
read-only;
};
partition5@e0000 {
label = "0:APPSBLENV"; /* uboot env*/
reg = <0x000e0000 0x00010000>;
read-only;
};
partition5@f0000 {
label = "0:APPSBL"; /* uboot */
reg = <0x000f0000 0x00080000>;
read-only;
};
partition5@170000 {
label = "0:ART";
reg = <0x00170000 0x00010000>;
read-only;
};
partition6@180000 {
compatible = "denx,fit";
label = "firmware";
reg = <0x00180000 0x01e80000>;
};
};
};
};
&blsp1_uart1 {
pinctrl-0 = <&serial_pins>;
pinctrl-names = "default";
status = "okay";
};
&cryptobam {
status = "okay";
};
&gmac0 {
qcom,phy_mdio_addr = <4>;
qcom,poll_required = <1>;
qcom,forced_speed = <1000>;
qcom,forced_duplex = <1>;
vlan_tag = <2 0x20>;
};
&gmac1 {
qcom,phy_mdio_addr = <3>;
qcom,poll_required = <1>;
qcom,forced_speed = <1000>;
qcom,forced_duplex = <1>;
vlan_tag = <1 0x10>;
};
&usb3_ss_phy {
status = "okay";
};
&usb3_hs_phy {
status = "okay";
};
&usb2_hs_phy {
status = "okay";
};
&wifi0 {
status = "okay";
};
&wifi1 {
status = "okay";
};

278
target/linux/ipq40xx/files-4.19/arch/arm/boot/dts/qcom-ipq4029-gl-b1300.dts Normal file
View File

@ -0,0 +1,278 @@
/* Copyright (c) 2015, The Linux Foundation. All rights reserved.
*
* Permission to use, copy, modify, and/or distribute this software for any
* purpose with or without fee is hereby granted, provided that the above
* copyright notice and this permission notice appear in all copies.
*
* THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
* WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
* MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
* ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
* WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
* ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
* OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
*
*/
#include "qcom-ipq4019.dtsi"
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/input/input.h>
#include <dt-bindings/soc/qcom,tcsr.h>
/ {
model = "GL.iNet GL-B1300";
compatible = "glinet,gl-b1300", "qcom,ipq4019";
aliases {
led-boot = &power;
led-failsafe = &power;
led-running = &power;
led-upgrade = &power;
};
memory {
device_type = "memory";
reg = <0x80000000 0x10000000>;
};
soc {
mdio@90000 {
status = "okay";
};
ess-psgmii@98000 {
status = "okay";
};
tcsr@1949000 {
compatible = "qcom,tcsr";
reg = <0x1949000 0x100>;
qcom,wifi_glb_cfg = <TCSR_WIFI_GLB_CFG>;
};
tcsr@194b000 {
/* select hostmode */
compatible = "qcom,tcsr";
reg = <0x194b000 0x100>;
qcom,usb-hsphy-mode-select = <TCSR_USB_HSPHY_HOST_MODE>;
status = "okay";
};
ess_tcsr@1953000 {
compatible = "qcom,tcsr";
reg = <0x1953000 0x1000>;
qcom,ess-interface-select = <TCSR_ESS_PSGMII>;
};
tcsr@1957000 {
compatible = "qcom,tcsr";
reg = <0x1957000 0x100>;
qcom,wifi_noc_memtype_m0_m2 = <TCSR_WIFI_NOC_MEMTYPE_M0_M2>;
};
usb2@60f8800 {
status = "okay";
};
usb3@8af8800 {
status = "okay";
};
crypto@8e3a000 {
status = "okay";
};
watchdog@b017000 {
status = "okay";
};
ess-switch@c000000 {
status = "okay";
switch_lan_bmp = <0x18>;
switch_wan_bmp = <0x20>;
};
edma@c080000 {
status = "okay";
};
};
gpio-keys {
compatible = "gpio-keys";
wps {
label = "wps";
gpios = <&tlmm 5 GPIO_ACTIVE_LOW>;
linux,code = <KEY_WPS_BUTTON>;
};
reset {
label = "reset";
gpios = <&tlmm 63 GPIO_ACTIVE_LOW>;
linux,code = <KEY_RESTART>;
};
};
gpio-leds {
compatible = "gpio-leds";
power: power {
label = "gl-b1300:green:power";
gpios = <&tlmm 4 GPIO_ACTIVE_HIGH>;
default-state = "on";
};
mesh {
label = "gl-b1300:green:mesh";
gpios = <&tlmm 3 GPIO_ACTIVE_HIGH>;
};
wlan {
label = "gl-b1300:green:wlan";
gpios = <&tlmm 2 GPIO_ACTIVE_HIGH>;
};
};
};
&blsp_dma {
status = "okay";
};
&cryptobam {
status = "okay";
};
&blsp1_spi1 {
pinctrl-0 = <&spi_0_pins>;
pinctrl-names = "default";
status = "okay";
cs-gpios = <&tlmm 54 GPIO_ACTIVE_HIGH>;
mx25l25635f@0 {
compatible = "jedec,spi-nor";
#address-cells = <1>;
#size-cells = <1>;
reg = <0>;
spi-max-frequency = <24000000>;
partitions {
compatible = "fixed-partitions";
#address-cells = <1>;
#size-cells = <1>;
SBL1@0 {
label = "SBL1";
reg = <0x0 0x40000>;
read-only;
};
MIBIB@40000 {
label = "MIBIB";
reg = <0x40000 0x20000>;
read-only;
};
QSEE@60000 {
label = "QSEE";
reg = <0x60000 0x60000>;
read-only;
};
CDT@c0000 {
label = "CDT";
reg = <0xc0000 0x10000>;
read-only;
};
DDRPARAMS@d0000 {
label = "DDRPARAMS";
reg = <0xd0000 0x10000>;
read-only;
};
APPSBLENV@e0000 {
label = "APPSBLENV";
reg = <0xe0000 0x10000>;
read-only;
};
APPSBL@f0000 {
label = "APPSBL";
reg = <0xf0000 0x80000>;
read-only;
};
ART@170000 {
label = "ART";
reg = <0x170000 0x10000>;
read-only;
};
firmware@180000 {
compatible = "denx,fit";
label = "firmware";
reg = <0x180000 0x1e80000>;
};
};
};
};
&blsp1_uart1 {
pinctrl-0 = <&serial_pins>;
pinctrl-names = "default";
status = "okay";
};
&tlmm {
serial_pins: serial_pinmux {
mux {
pins = "gpio60", "gpio61";
function = "blsp_uart0";
bias-disable;
};
};
spi_0_pins: spi_0_pinmux {
pinmux {
function = "blsp_spi0";
pins = "gpio55", "gpio56", "gpio57";
};
pinmux_cs {
function = "gpio";
pins = "gpio54";
};
pinconf {
pins = "gpio55", "gpio56", "gpio57";
drive-strength = <12>;
bias-disable;
};
pinconf_cs {
pins = "gpio54";
drive-strength = <2>;
bias-disable;
output-high;
};
};
};
&usb2_hs_phy {
status = "okay";
};
&usb3_hs_phy {
status = "okay";
};
&usb3_ss_phy {
status = "okay";
};
&wifi0 {
status = "okay";
qcom,ath10k-calibration-variant = "GL-B1300";
};
&wifi1 {
status = "okay";
qcom,ath10k-calibration-variant = "GL-B1300";
};

394
target/linux/ipq40xx/files-4.19/arch/arm/boot/dts/qcom-ipq4029-mr33.dts Normal file
View File

@ -0,0 +1,394 @@
// SPDX-License-Identifier: GPL-2.0
/*
* Device Tree Source for Meraki MR33 (Stinkbug)
*
* Copyright (C) 2017 Chris Blake <chrisrblake93@gmail.com>
* Copyright (C) 2017 Christian Lamparter <chunkeey@googlemail.com>
*
* Based on Cisco Meraki DTS from GPL release r25-linux-3.14-20170427
*
* This file is licensed under the terms of the GNU General Public
* License version 2. This program is licensed "as is" without
* any warranty of any kind, whether express or implied.
*/
#include "qcom-ipq4019.dtsi"
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/input/input.h>
#include <dt-bindings/soc/qcom,tcsr.h>
/ {
model = "Meraki MR33 Access Point";
compatible = "meraki,mr33", "qcom,ipq4019";
aliases {
led-boot = &status_green;
led-failsafe = &status_red;
led-running = &status_green;
led-upgrade = &power_orange;
};
/* Do we really need this defined? */
memory {
device_type = "memory";
reg = <0x80000000 0x10000000>;
};
soc {
mdio@90000 {
status = "okay";
pinctrl-0 = <&mdio_pins>;
pinctrl-names = "default";
/delete-node/ ethernet-phy@0;
/delete-node/ ethernet-phy@2;
/delete-node/ ethernet-phy@3;
/delete-node/ ethernet-phy@4;
};
/* It is a 56-bit counter that supplies the count to the ARM arch
timers and without upstream driver */
counter@4a1000 {
compatible = "qcom,qca-gcnt";
reg = <0x4a1000 0x4>;
};
ess_tcsr@1953000 {
compatible = "qcom,tcsr";
reg = <0x1953000 0x1000>;
qcom,ess-interface-select = <TCSR_ESS_PSGMII_RGMII5>;
};
tcsr@1949000 {
compatible = "qcom,tcsr";
reg = <0x1949000 0x100>;
qcom,wifi_glb_cfg = <TCSR_WIFI_GLB_CFG>;
};
tcsr@1957000 {
compatible = "qcom,tcsr";
reg = <0x1957000 0x100>;
qcom,wifi_noc_memtype_m0_m2 = <TCSR_WIFI_NOC_MEMTYPE_M0_M2>;
};
serial@78b0000 {
pinctrl-0 = <&serial_1_pins>;
pinctrl-names = "default";
status = "okay";
bluetooth {
compatible = "ti,cc2650";
enable-gpios = <&tlmm 12 GPIO_ACTIVE_LOW>;
};
};
crypto@8e3a000 {
status = "okay";
};
watchdog@b017000 {
status = "okay";
};
ess-switch@c000000 {
switch_mac_mode = <0x3>; /* mac mode for RGMII RMII */
switch_lan_bmp = <0x0>; /* lan port bitmap */
switch_wan_bmp = <0x10>; /* wan port bitmap */
};
edma@c080000 {
qcom,single-phy;
qcom,num_gmac = <1>;
phy-mode = "rgmii-rxid";
status = "okay";
};
};
keys {
compatible = "gpio-keys";
reset {
label = "reset";
gpios = <&tlmm 18 GPIO_ACTIVE_LOW>;
linux,code = <KEY_RESTART>;
};
};
leds {
compatible = "gpio-leds";
power_orange: power {
label = "mr33:orange:power";
gpios = <&tlmm 49 GPIO_ACTIVE_LOW>;
panic-indicator;
};
};
};
&blsp_dma {
status = "okay";
};
&blsp1_uart1 {
pinctrl-0 = <&serial_0_pins>;
pinctrl-names = "default";
status = "okay";
};
&cryptobam {
status = "okay";
};
&gmac0 {
qcom,phy_mdio_addr = <1>;
qcom,poll_required = <1>;
vlan_tag = <0 0x20>;
};
&blsp1_i2c3{
pinctrl-0 = <&i2c_0_pins>;
pinctrl-names = "default";
status = "okay";
at24@50 {
compatible = "atmel,24c64";
pagesize = <32>;
reg = <0x50>;
read-only; /* This holds our MAC & Meraki board-data */
};
};
&blsp1_i2c4{
pinctrl-0 = <&i2c_1_pins>;
pinctrl-names = "default";
status = "okay";
led-controller@30 {
compatible = "ti,lp5562";
reg = <0x30>;
clock-mode = /bits/8 <2>;
enable-gpio = <&tlmm 48 GPIO_ACTIVE_HIGH>;
/* RGB led */
status_red: chan0 {
chan-name = "mr33:red:status";
led-cur = /bits/ 8 <0x20>;
max-cur = /bits/ 8 <0x60>;
};
status_green: chan1 {
chan-name = "mr33:green:status";
led-cur = /bits/ 8 <0x20>;
max-cur = /bits/ 8 <0x60>;
};
chan2 {
chan-name = "mr33:blue:status";
led-cur = /bits/ 8 <0x20>;
max-cur = /bits/ 8 <0x60>;
};
chan3 {
chan-name = "mr33:white:status";
led-cur = /bits/ 8 <0x20>;
max-cur = /bits/ 8 <0x60>;
};
};
};
&nand {
pinctrl-0 = <&nand_pins>;
pinctrl-names = "default";
status = "okay";
nand@0 {
partitions {
compatible = "fixed-partitions";
#address-cells = <1>;
#size-cells = <1>;
partition@0 {
label = "sbl1";
reg = <0x000000000000 0x000000100000>;
read-only;
};
partition@1 {
label = "mibib";
reg = <0x000000100000 0x000000100000>;
read-only;
};
partition@2 {
label = "bootconfig";
reg = <0x000000200000 0x000000100000>;
read-only;
};
partition@3 {
label = "qsee";
reg = <0x000000300000 0x000000100000>;
read-only;
};
partition@4 {
label = "qsee_alt";
reg = <0x000000400000 0x000000100000>;
read-only;
};
partition@5 {
label = "cdt";
reg = <0x000000500000 0x000000080000>;
read-only;
};
partition@6 {
label = "cdt_alt";
reg = <0x000000580000 0x000000080000>;
read-only;
};
partition@7 {
label = "ddrparams";
reg = <0x000000600000 0x000000080000>;
read-only;
};
partition@8 {
label = "u-boot";
reg = <0x000000700000 0x000000200000>;
read-only;
};
partition@9 {
label = "u-boot-backup";
reg = <0x000000900000 0x000000200000>;
read-only;
};
partition@10 {
label = "ART";
reg = <0x000000b00000 0x000000080000>;
read-only;
};
partition@11 {
label = "ubi";
reg = <0x000000c00000 0x000007000000>;
};
};
};
};
&pcie0 {
status = "okay";
perst-gpio = <&tlmm 38 GPIO_ACTIVE_LOW>;
wake-gpio = <&tlmm 50 GPIO_ACTIVE_LOW>;
bridge@0,0 {
reg = <0x00000000 0 0 0 0>;
#address-cells = <3>;
#size-cells = <2>;
ranges;
wifi2: wifi@0,0 {
compatible = "qcom,ath10k";
status = "okay";
reg = <0x00010000 0 0 0 0>;
};
};
};
&qpic_bam {
status = "okay";
};
&tlmm {
/*
* GPIO43 should be 0/1 whenever the unit is
* powered through PoE or AC-Adapter.
* That said, playing with this seems to
* reset the AP.
*/
mdio_pins: mdio_pinmux {
mux_1 {
pins = "gpio6";
function = "mdio";
bias-pull-up;
};
mux_2 {
pins = "gpio7";
function = "mdc";
bias-pull-up;
};
};
serial_0_pins: serial_pinmux {
mux {
pins = "gpio16", "gpio17";
function = "blsp_uart0";
bias-disable;
};
};
serial_1_pins: serial1_pinmux {
mux {
/* We use the i2c-0 pins for serial_1 */
pins = "gpio8", "gpio9";
function = "blsp_uart1";
bias-disable;
};
};
i2c_0_pins: i2c_0_pinmux {
pinmux {
function = "blsp_i2c0";
pins = "gpio20", "gpio21";
};
pinconf {
pins = "gpio20", "gpio21";
drive-strength = <16>;
bias-disable;
};
};
i2c_1_pins: i2c_1_pinmux {
pinmux {
function = "blsp_i2c1";
pins = "gpio34", "gpio35";
};
pinconf {
pins = "gpio34", "gpio35";
drive-strength = <16>;
bias-disable;
};
};
nand_pins: nand_pins {
/*
* There are 18 pins. 15 pins are common between LCD and NAND.
* The QPIC controller arbitrates between LCD and NAND. Of the
* remaining 4, 2 are for NAND and 2 are for LCD exclusively.
*
* The meraki source hints that the bluetooth module claims
* pin 52 as well. But sadly, there's no data whenever this
* is a NAND or LCD exclusive pin or not.
*/
pullups {
pins = "gpio52", "gpio53", "gpio58",
"gpio59";
function = "qpic";
bias-pull-up;
};
pulldowns {
pins = "gpio54", "gpio55", "gpio56",
"gpio57", "gpio60", "gpio61",
"gpio62", "gpio63", "gpio64",
"gpio65", "gpio66", "gpio67",
"gpio68", "gpio69";
function = "qpic";
bias-pull-down;
};
};
};
&wifi0 {
status = "okay";
qcom,ath10k-calibration-variant = "Meraki-MR33";
};
&wifi1 {
status = "okay";
qcom,ath10k-calibration-variant = "Meraki-MR33";
};