mirror of
https://github.com/hanwckf/immortalwrt-mt798x.git
synced 2025-01-07 01:53:34 +08:00
mediatek: add Nokia EA0326GMP support (#270)
Hardware specification: SoC: MediaTek MT7981B 2x A53 Flash: 128 MB SPI-NAND RAM: 256MB Ethernet: 4x 10/100/1000 Mbps Switch: MediaTek MT7531AE WiFi: MediaTek MT7976C Button: Reset, WPS/Mesh Power: DC 12V 1A Gain SSH access: 1. Login into web interface, and download the configuration. 2. Download the configration utilities: https://firmware.download.immortalwrt.eu.org/cnsztl/mediatek/filogic/openwrt-mediatek-mt7981-nokia-ea0326gmp-config-utils.tar.gz These binaries are extraced from the factory firmware, which are dynamically linked with aarch64 musl 1.1.24. To use them, you must run them under the same runtime environment, otherwise the binaries will not work! 3. Upload the configuration and utilities to a suitable environment. 4. Uncompress the utilities, move them to '/bin' and give them executable permisison: tar -zxf openwrt-mediatek-mt7981-nokia-ea0326gmp-config-utils.tar.gz mv mkconfig seama /bin chmod +x /bin/mkconfig chmod +x /bin/seama 5. Decrypt and uncompress the configuration: Enter fakeroot if you are not login as root. mkconfig -a de-enca -m EA0326GMP_3FE79221BAAA -i EA0326GMP_3FE79221BAAA-xxxxxxxx-backup.tar.gz -o backup.tar.gz tar -zxf backup.tar.gz 6. Edit 'etc/config/dropbear', set 'enable' to '1'. 7. Edit `etc/passwd`, remove root password: 'root::1:0:99999:7:::'. 8. Repack the configuration: tar -zcf backup.tar.gz etc/ mkconfig -a enca -m EA0326GMP_3FE79221BAAA -i backup.tar.gz -o EA0326GMP_3FE79221BAAA-xxxxxxxx-backup.tar.gz 9. Upload new configuration via web interface, now you can SSH to EA0326GMP. A minimum configuration which enabled SSH access is also provided to simplify the process: https://firmware.download.immortalwrt.eu.org/cnsztl/mediatek/filogic/openwrt-mediatek-mt7981-nokia-ea0326gmp-enable-ssh.tar.gz Flash instructions: 1. SSH to EA0326GMP, backup everything, especially 'Factory' part. 2. Write new FIP provided by https://github.com/hanwckf/bl-mt798x. 3. Reboot, enter web failsafe and upload -factory.bin firmware. Signed-off-by: Tianling Shen <cnsztl@immortalwrt.org>
This commit is contained in:
Tianling Shen
GitHub
parent
eb586ee966
commit
82f852cda1
@ -757,6 +757,7 @@ setup_model()
|
||||
*rax3000m* |\
|
||||
h3c,nx30pro |\
|
||||
konka,komi-a31 |\
|
||||
*nokia,ea0326gmp* |\
|
||||
nradio,wt9103 |\
|
||||
*7981*)
|
||||
MT7981_whnat $num_of_wifi $usbnet
|
||||
|
||||
@ -0,0 +1,257 @@
|
||||
// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
|
||||
|
||||
/dts-v1/;
|
||||
#include <dt-bindings/gpio/gpio.h>
|
||||
#include <dt-bindings/input/input.h>
|
||||
|
||||
#include "mt7981.dtsi"
|
||||
|
||||
/ {
|
||||
model = "Nokia EA0326GMP";
|
||||
compatible = "nokia,ea0326gmp", "mediatek,mt7981";
|
||||
|
||||
aliases {
|
||||
led-boot = &power_led;
|
||||
led-running = &power_led;
|
||||
led-failsafe = &power_led;
|
||||
led-upgrade = &power_led;
|
||||
};
|
||||
|
||||
chosen {
|
||||
bootargs = "console=ttyS0,115200n1 loglevel=8 earlycon=uart8250,mmio32,0x11002000";
|
||||
};
|
||||
|
||||
memory@40000000 {
|
||||
reg = <0 0x40000000 0 0x10000000>;
|
||||
};
|
||||
|
||||
gpio-keys {
|
||||
compatible = "gpio-keys";
|
||||
|
||||
button-reset {
|
||||
label = "reset";
|
||||
linux,code = <KEY_RESTART>;
|
||||
gpios = <&pio 1 GPIO_ACTIVE_LOW>;
|
||||
};
|
||||
|
||||
button-wps {
|
||||
label = "wps";
|
||||
linux,code = <KEY_WPS_BUTTON>;
|
||||
gpios = <&pio 0 GPIO_ACTIVE_LOW>;
|
||||
};
|
||||
};
|
||||
|
||||
gpio-leds {
|
||||
compatible = "gpio-leds";
|
||||
|
||||
power_led: led-0 {
|
||||
label = "green:power";
|
||||
gpios = <&pio 4 GPIO_ACTIVE_LOW>;
|
||||
};
|
||||
|
||||
led-1 {
|
||||
label = "green:wan";
|
||||
gpios = <&pio 5 GPIO_ACTIVE_LOW>;
|
||||
};
|
||||
|
||||
led-2 {
|
||||
label = "red:wan";
|
||||
gpios = <&pio 6 GPIO_ACTIVE_LOW>;
|
||||
};
|
||||
|
||||
led-3 {
|
||||
label = "green:lan";
|
||||
gpios = <&pio 7 GPIO_ACTIVE_LOW>;
|
||||
};
|
||||
|
||||
led-4 {
|
||||
label = "green:wlan";
|
||||
gpios = <&pio 8 GPIO_ACTIVE_LOW>;
|
||||
};
|
||||
|
||||
led-5 {
|
||||
label = "green:wps";
|
||||
gpios = <&pio 9 GPIO_ACTIVE_LOW>;
|
||||
};
|
||||
};
|
||||
|
||||
gsw: gsw@0 {
|
||||
compatible = "mediatek,mt753x";
|
||||
mediatek,ethsys = <ðsys>;
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
};
|
||||
|
||||
nmbm_spim_nand {
|
||||
compatible = "generic,nmbm";
|
||||
|
||||
#address-cells = <1>;
|
||||
#size-cells = <1>;
|
||||
|
||||
lower-mtd-device = <&spi_nand>;
|
||||
forced-create;
|
||||
|
||||
partitions {
|
||||
compatible = "fixed-partitions";
|
||||
#address-cells = <1>;
|
||||
#size-cells = <1>;
|
||||
|
||||
partition@0 {
|
||||
label = "BL2";
|
||||
reg = <0x0 0x100000>;
|
||||
};
|
||||
|
||||
partition@100000 {
|
||||
label = "u-boot-env";
|
||||
reg = <0x100000 0x80000>;
|
||||
};
|
||||
|
||||
partition@180000 {
|
||||
label = "Factory";
|
||||
reg = <0x180000 0x200000>;
|
||||
};
|
||||
|
||||
partition@380000 {
|
||||
label = "FIP";
|
||||
reg = <0x380000 0x200000>;
|
||||
};
|
||||
|
||||
partition@580000 {
|
||||
label = "Config";
|
||||
reg = <0x580000 0x200000>;
|
||||
};
|
||||
|
||||
partition@780000 {
|
||||
label = "Config2";
|
||||
reg = <0x780000 0x200000>;
|
||||
};
|
||||
|
||||
partition@980000 {
|
||||
label = "ubi";
|
||||
reg = <0x980000 0x6e00000>;
|
||||
};
|
||||
|
||||
/* Leave last 8.5 MiB for NMBM bad block table */
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
ð {
|
||||
status = "okay";
|
||||
|
||||
gmac0: mac@0 {
|
||||
compatible = "mediatek,eth-mac";
|
||||
reg = <0>;
|
||||
phy-mode = "2500base-x";
|
||||
|
||||
fixed-link {
|
||||
speed = <2500>;
|
||||
full-duplex;
|
||||
pause;
|
||||
};
|
||||
};
|
||||
|
||||
gmac1: mac@1 {
|
||||
compatible = "mediatek,eth-mac";
|
||||
reg = <1>;
|
||||
phy-mode = "gmii";
|
||||
phy-handle = <&phy0>;
|
||||
};
|
||||
|
||||
mdio: mdio-bus {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
|
||||
phy0: ethernet-phy@0 {
|
||||
compatible = "ethernet-phy-id03a2.9461";
|
||||
reg = <0>;
|
||||
phy-mode = "gmii";
|
||||
nvmem-cells = <&phy_calibration>;
|
||||
nvmem-cell-names = "phy-cal-data";
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&gsw {
|
||||
mediatek,mdio = <&mdio>;
|
||||
mediatek,mdio_master_pinmux = <0>;
|
||||
reset-gpios = <&pio 39 0>;
|
||||
interrupt-parent = <&pio>;
|
||||
interrupts = <38 IRQ_TYPE_LEVEL_HIGH>;
|
||||
status = "okay";
|
||||
|
||||
port6: port@6 {
|
||||
compatible = "mediatek,mt753x-port";
|
||||
mediatek,ssc-on;
|
||||
reg = <6>;
|
||||
phy-mode = "sgmii";
|
||||
|
||||
fixed-link {
|
||||
speed = <2500>;
|
||||
full-duplex;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&hnat {
|
||||
mtketh-wan = "eth1";
|
||||
mtketh-lan = "eth0";
|
||||
mtketh-max-gmac = <2>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&spi0 {
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&spi0_flash_pins>;
|
||||
status = "okay";
|
||||
|
||||
spi_nand: flash@0 {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <1>;
|
||||
compatible = "spi-nand";
|
||||
reg = <0>;
|
||||
spi-max-frequency = <52000000>;
|
||||
|
||||
spi-cal-enable;
|
||||
spi-cal-mode = "read-data";
|
||||
spi-cal-datalen = <7>;
|
||||
spi-cal-data = /bits/ 8 <0x53 0x50 0x49 0x4E 0x41 0x4E 0x44>;
|
||||
spi-cal-addrlen = <5>;
|
||||
spi-cal-addr = /bits/ 32 <0x0 0x0 0x0 0x0 0x0>;
|
||||
|
||||
spi-tx-bus-width = <4>;
|
||||
spi-rx-bus-width = <4>;
|
||||
mediatek,nmbm;
|
||||
mediatek,bmt-max-ratio = <1>;
|
||||
mediatek,bmt-max-reserved-blocks = <64>;
|
||||
};
|
||||
};
|
||||
|
||||
&pio {
|
||||
spi0_flash_pins: spi0-pins {
|
||||
mux {
|
||||
function = "spi";
|
||||
groups = "spi0", "spi0_wp_hold";
|
||||
};
|
||||
|
||||
conf-pu {
|
||||
pins = "SPI0_CS", "SPI0_HOLD", "SPI0_WP";
|
||||
drive-strength = <8>;
|
||||
bias-pull-up = <103>;
|
||||
};
|
||||
|
||||
conf-pd {
|
||||
pins = "SPI0_CLK", "SPI0_MOSI", "SPI0_MISO";
|
||||
drive-strength = <8>;
|
||||
bias-pull-down = <103>;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&uart0 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&watchdog {
|
||||
status = "okay";
|
||||
};
|
||||
@ -520,6 +520,23 @@ define Device/imou_lc-hx3001
|
||||
endef
|
||||
TARGET_DEVICES += imou_lc-hx3001
|
||||
|
||||
define Device/nokia_ea0326gmp
|
||||
DEVICE_VENDOR := Nokia
|
||||
DEVICE_MODEL := EA0326GMP
|
||||
DEVICE_DTS := mt7981-nokia-ea0326gmp
|
||||
DEVICE_DTS_DIR := $(DTS_DIR)/mediatek
|
||||
SUPPORTED_DEVICES := nokia,ea0326gmp
|
||||
UBINIZE_OPTS := -E 5
|
||||
BLOCKSIZE := 128k
|
||||
PAGESIZE := 2048
|
||||
IMAGE_SIZE := 112640k
|
||||
KERNEL_IN_UBI := 1
|
||||
IMAGES += factory.bin
|
||||
IMAGE/factory.bin := append-ubi | check-size $$$$(IMAGE_SIZE)
|
||||
IMAGE/sysupgrade.bin := sysupgrade-tar | append-metadata
|
||||
endef
|
||||
TARGET_DEVICES += nokia_ea0326gmp
|
||||
|
||||
define Device/nradio_wt9103
|
||||
DEVICE_VENDOR := NRADIO
|
||||
DEVICE_MODEL := WT9103
|
||||
|
||||
@ -21,7 +21,8 @@ clt,r30b1)
|
||||
ucidef_set_led_default "internet" "INTERNET" "led_internet" "1"
|
||||
ucidef_set_led_default "power_red" "POWER_RED" "led_power" "0"
|
||||
;;
|
||||
imou,lc-hx3001)
|
||||
imou,lc-hx3001|\
|
||||
nokia,ea0326gmp)
|
||||
ucidef_set_led_netdev "wan" "WAN" "green:wan" "eth1" "link"
|
||||
ucidef_set_led_netdev "lan" "LAN" "green:lan" "eth0" "link"
|
||||
ucidef_set_led_netdev "wlan" "WLAN" "green:wlan" "rax0" "link"
|
||||
|
||||
@ -3,6 +3,7 @@
|
||||
. /lib/functions.sh
|
||||
. /lib/functions/uci-defaults.sh
|
||||
. /lib/functions/system.sh
|
||||
. /lib/functions/caldata.sh
|
||||
|
||||
mediatek_setup_interfaces()
|
||||
{
|
||||
@ -62,6 +63,11 @@ mediatek_setup_interfaces()
|
||||
ucidef_add_switch "switch0" \
|
||||
"0:lan:3" "1:lan:2" "2:lan:1" "6u@eth0"
|
||||
;;
|
||||
*nokia,ea0326gmp*)
|
||||
ucidef_set_interfaces_lan_wan "eth0" "eth1"
|
||||
ucidef_add_switch "switch0" \
|
||||
"1:lan" "2:lan" "3:lan" "6u@eth0"
|
||||
;;
|
||||
*mt3000* |\
|
||||
glinet,x3000-emmc |\
|
||||
*xe3000* |\
|
||||
@ -89,18 +95,12 @@ mtk_facrory_write_mac()
|
||||
local macaddr=$3 #aa:bb:cc:dd:ee:ff
|
||||
local data=""
|
||||
|
||||
part=$(find_mtd_part $part_name)
|
||||
part="$(find_mtd_part $part_name)"
|
||||
if [ -n "$part" ] && [ -n "$macaddr" ]; then
|
||||
local i=1
|
||||
for x in ${macaddr//:/ }; do
|
||||
[ $i -gt 6 ] && break
|
||||
data=${data}"\x${x}"
|
||||
i=$((i+1))
|
||||
done
|
||||
dd if=$part of=/tmp/Factory.backup
|
||||
printf "${data}" | dd conv=notrunc of=/tmp/Factory.backup bs=1 seek=$((${offset}))
|
||||
mtd write /tmp/Factory.backup $part_name
|
||||
rm -rf /tmp/Factory.backup
|
||||
dd if="$part" of="/tmp/Factory.backup"
|
||||
caldata_patch_mac "$macaddr" "0x4" "" "/tmp/Factory.backup"
|
||||
mtd write "/tmp/Factory.backup" "$part_name"
|
||||
rm -rf "/tmp/Factory.backup"
|
||||
fi
|
||||
}
|
||||
|
||||
@ -202,6 +202,16 @@ mediatek_setup_macs()
|
||||
wan_mac=$(macaddr_add $wifi_mac 1)
|
||||
fi
|
||||
;;
|
||||
nokia,ea0326gmp)
|
||||
lan_mac=$(mtd_get_mac_binary Factory 0x28)
|
||||
wan_mac=$(macaddr_add $lan_mac 3)
|
||||
label_mac=$wan_mac
|
||||
|
||||
if [ "$(mtk_factory_get_byte Factory 4 2)" = "00-0c" ]; then
|
||||
local wifi_mac="$(macaddr_add $lan_mac 1)"
|
||||
mtk_facrory_write_mac Factory 4 "$wifi_mac"
|
||||
fi
|
||||
;;
|
||||
nradio,wt9103)
|
||||
lan_mac=$(mtd_get_mac_ascii bdinfo "fac_mac ")
|
||||
label_mac=$lan_mac
|
||||
|
||||
@ -205,6 +205,7 @@ platform_do_upgrade() {
|
||||
cmcc,rax3000m |\
|
||||
h3c,nx30pro |\
|
||||
*konka,komi-a31* |\
|
||||
*nokia,ea0326gmp* |\
|
||||
*snand*)
|
||||
nand_do_upgrade "$1"
|
||||
;;
|
||||
@ -251,6 +252,7 @@ platform_check_image() {
|
||||
cmcc,rax3000m* |\
|
||||
h3c,nx30pro |\
|
||||
*konka,komi-a31* |\
|
||||
*nokia,ea0326gmp* |\
|
||||
nradio,wt9103 |\
|
||||
*snand* |\
|
||||
*emmc*)
|
||||
|
||||
Loading…
x
Reference in New Issue
Block a user