Backups/immortalwrt-mt798x
1
0
Fork 0
mirror of https://github.com/hanwckf/immortalwrt-mt798x.git synced 2025-01-07 01:53:34 +08:00
Code Issues Actions Packages Projects Releases Wiki Activity

ipq40xx: add support for AVM FRITZ!Repeater 1200

Browse Source 
Hardware
--------
SoC:   Qualcomm IPQ4019
RAM:   256M DDR3
FLASH: 128M NAND
WiFi:  2T2R IPQ4019 bgn
       2T2R IPQ4019 a/n/ac
ETH:   Atheros AR8033 RGMII PHY
BTN:   1x Connect (WPS)
LED:   Power (green/red/yellow)

Installation
------------

1. Grab the uboot for the Device from the 'u-boot-fritz1200'
   subdirectory. Place it in the same directory as the 'eva_ramboot.py'
   script. It is located in the 'scripts/flashing' subdirectory of the
   OpenWRT tree.

2. Assign yourself the IP address 192.168.178.10/24. Connect your
   Computer to one of the boxes LAN ports.

3. Connect Power to the Box. As soon as the LAN port of your computer
   shows link, load the U-Boot to the box using following command.

   > ./eva_ramboot.py --offset 0x85000000 192.168.178.1 uboot-fritz1200.bin

4. The U-Boot will now start. Now assign yourself the IP address
   192.168.1.70/24. Copy the OpenWRT initramfs (!) image to a TFTP
   server root directory and rename it to 'FRITZ1200.bin'.

5. The Box will now boot OpenWRT from RAM. This can take up to two
   minutes.

6. Copy the U-Boot and the OpenWRT sysupgrade (!) image to the Box using
   scp. SSH into the Box and first write the Bootloader to both previous
   kernel partitions.

   > mtd write /path/to/uboot-fritz1200.bin uboot0
   > mtd write /path/to/uboot-fritz1200.bin uboot1

7. Remove the AVM filesystem partitions to make room for our kernel +
   rootfs + overlayfs.

   > ubirmvol /dev/ubi0 --name=avm_filesys_0
   > ubirmvol /dev/ubi0 --name=avm_filesys_1

8. Flash OpenWRT peristently using sysupgrade.

   > sysupgrade -n /path/to/openwrt-sysupgrade.bin

Signed-off-by: David Bauer <mail@david-bauer.net>
This commit is contained in:
David Bauer 2019-09-10 21:07:23 +02:00
parent c0f4078164
commit 7f187229a8
9 changed files with 557 additions and 7 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

7
package/boot/uboot-fritz4040/Makefile
View File

@ -26,6 +26,11 @@ define U-Boot/Default
UBOOT_IMAGE:=uboot-$(1).bin
endef
define U-Boot/fritz1200
NAME:=FritzRepeater 1200
BUILD_DEVICES:=avm_fritzrepeater-1200
endef
define U-Boot/fritz3000
NAME:=FritzRepeater 3000
BUILD_DEVICES:=avm_fritzrepeater-3000
@ -67,6 +72,6 @@ define Package/u-boot/install
$(INSTALL_BIN) $(PKG_BUILD_DIR)/upload-to-f4040.sh $(1)/
endef
UBOOT_TARGETS := fritz3000 fritz4040 fritz7530
UBOOT_TARGETS := fritz1200 fritz3000 fritz4040 fritz7530
$(eval $(call BuildPackage/U-Boot))

9
target/linux/ipq40xx/base-files/etc/board.d/02_network
View File

@ -39,10 +39,7 @@ ipq40xx_setup_interfaces()
ucidef_add_switch "switch0" \
"0u@eth0" "1:lan" "2:lan" "3:lan" "4:lan"
;;
avm,fritzrepeater-3000|\
compex,wpj428)
ucidef_set_interface_lan "eth0 eth1"
;;
avm,fritzrepeater-1200|\
engenius,eap1300|\
meraki,mr33|\
netgear,ex6100v2|\
@ -50,6 +47,10 @@ ipq40xx_setup_interfaces()
zyxel,wre6606)
ucidef_set_interface_lan "eth0"
;;
avm,fritzrepeater-3000|\
compex,wpj428)
ucidef_set_interface_lan "eth0 eth1"
;;
glinet,gl-b1300)
ucidef_set_interfaces_lan_wan "eth0" "eth1"
ucidef_add_switch "switch0" \

2
target/linux/ipq40xx/base-files/etc/hotplug.d/firmware/11-ath10k-caldata
View File

@ -61,6 +61,7 @@ case "$FIRMWARE" in
/usr/bin/fritz_cal_extract -i 1 -s 0x400 -e 0x207 -l 12064 -o /lib/firmware/$FIRMWARE $(find_mtd_chardev "urlader_config")
;;
avm,fritzbox-7530 |\
avm,fritzrepeater-1200 |\
avm,fritzrepeater-3000)
/usr/bin/fritz_cal_extract -i 1 -s 0x3C000 -e 0x207 -l 12064 -o /lib/firmware/$FIRMWARE $(find_mtd_chardev "urlader0") || \
/usr/bin/fritz_cal_extract -i 1 -s 0x3C800 -e 0x207 -l 12064 -o /lib/firmware/$FIRMWARE $(find_mtd_chardev "urlader0") || \
@ -123,6 +124,7 @@ case "$FIRMWARE" in
/usr/bin/fritz_cal_extract -i 1 -s 0x400 -e 0x208 -l 12064 -o /lib/firmware/$FIRMWARE $(find_mtd_chardev "urlader_config")
;;
avm,fritzbox-7530 |\
avm,fritzrepeater-1200 |\
avm,fritzrepeater-3000)
/usr/bin/fritz_cal_extract -i 1 -s 0x3C800 -e 0x208 -l 12064 -o /lib/firmware/$FIRMWARE $(find_mtd_chardev "urlader0") || \
/usr/bin/fritz_cal_extract -i 1 -s 0x3D000 -e 0x208 -l 12064 -o /lib/firmware/$FIRMWARE $(find_mtd_chardev "urlader0") || \

1
target/linux/ipq40xx/base-files/lib/upgrade/platform.sh
View File

@ -48,6 +48,7 @@ platform_do_upgrade() {
case "$(board_name)" in
8dev,jalapeno |\
avm,fritzbox-7530 |\
avm,fritzrepeater-1200 |\
avm,fritzrepeater-3000 |\
qxwlan,e2600ac-c2)
nand_do_upgrade "$1"

262
target/linux/ipq40xx/files-4.14/arch/arm/boot/dts/qcom-ipq4019-fritzrepeater-1200.dts Normal file
View File

@ -0,0 +1,262 @@
// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
#include "qcom-ipq4019.dtsi"
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/input/input.h>
#include <dt-bindings/soc/qcom,tcsr.h>
/ {
model = "AVM FRITZ!Repeater 1200";
compatible = "avm,fritzrepeater-1200";
aliases {
led-boot = &power_green;
led-failsafe = &power_red;
led-running = &power_green;
led-upgrade = &power_red;
};
soc {
mdio@90000 {
status = "okay";
pinctrl-0 = <&mdio_pins>;
pinctrl-names = "default";
};
tcsr@1949000 {
compatible = "qcom,tcsr";
reg = <0x1949000 0x100>;
qcom,wifi_glb_cfg = <TCSR_WIFI_GLB_CFG>;
};
ess_tcsr@1953000 {
compatible = "qcom,tcsr";
reg = <0x1953000 0x1000>;
qcom,ess-interface-select = <TCSR_ESS_PSGMII_RGMII5>;
};
tcsr@1957000 {
compatible = "qcom,tcsr";
reg = <0x1957000 0x100>;
qcom,wifi_noc_memtype_m0_m2 = <TCSR_WIFI_NOC_MEMTYPE_M0_M2>;
};
crypto@8e3a000 {
status = "okay";
};
watchdog@b017000 {
status = "okay";
};
ess-switch@c000000 {
switch_mac_mode = <0x3>; /* mac mode for RGMII RMII */
switch_lan_bmp = <0x0>; /* lan port bitmap */
switch_wan_bmp = <0x10>; /* wan port bitmap */
};
edma@c080000 {
status = "okay";
phy-mode = "rgmii-rxid";
qcom,num_gmac = <1>;
qcom,single-phy;
};
};
key {
compatible = "gpio-keys";
wps {
label = "WPS button";
gpios = <&tlmm 10 GPIO_ACTIVE_LOW>;
linux,code = <KEY_WPS_BUTTON>;
};
};
leds {
compatible = "gpio-leds";
power_red: power_red {
label = "fritzwlan-1200:red:power";
gpios = <&tlmm 50 GPIO_ACTIVE_LOW>;
};
power_green: power_green {
label = "fritzwlan-1200:green:power";
gpios = <&tlmm 45 GPIO_ACTIVE_HIGH>;
};
power_yellow {
label = "fritzwlan-1200:yellow:power";
gpios = <&tlmm 49 GPIO_ACTIVE_LOW>;
};
};
};
&tlmm {
serial_0_pins: serial_pinmux {
mux {
pins = "gpio16", "gpio17";
function = "blsp_uart0";
bias-disable;
};
};
nand_pins: nand_pins {
pullups {
pins = "gpio53", "gpio58", "gpio59";
function = "qpic";
bias-pull-up;
};
pulldowns {
pins = "gpio54", "gpio55", "gpio56",
"gpio57", "gpio60", "gpio61",
"gpio62", "gpio63", "gpio64",
"gpio65", "gpio66", "gpio67",
"gpio68", "gpio69";
function = "qpic";
bias-pull-down;
};
};
mdio_pins: mdio_pinmux {
mux_1 {
pins = "gpio6";
function = "mdio";
bias-pull-up;
};
mux_2 {
pins = "gpio7";
function = "mdc";
bias-pull-up;
};
};
phy-reset {
line-name = "PHY-reset";
gpios = <19 GPIO_ACTIVE_HIGH>;
gpio-hog;
output-high;
};
phy-reset-2 {
line-name = "PHY-reset-2";
gpios = <47 GPIO_ACTIVE_HIGH>;
gpio-hog;
output-high;
};
};
&nand {
pinctrl-0 = <&nand_pins>;
pinctrl-names = "default";
status = "okay";
nand@0 {
partitions {
compatible = "fixed-partitions";
#address-cells = <1>;
#size-cells = <1>;
partition@0 {
label = "SBL1";
reg = <0x0 0x80000>;
read-only;
};
partition@80000 {
label = "MIBIB";
reg = <0x80000 0x80000>;
read-only;
};
partition@100000 {
label = "QSEE";
reg = <0x100000 0x80000>;
read-only;
};
partition@180000 {
label = "CDT";
reg = <0x180000 0x40000>;
read-only;
};
partition@1c0000 {
label = "QSEE_B";
reg = <0x1c0000 0x80000>;
read-only;
};
partition@240000 {
label = "urlader0";
reg = <0x240000 0x40000>;
read-only;
};
partition@280000 {
label = "urlader1";
reg = <0x280000 0x40000>;
read-only;
};
partition@2c0000 {
label = "nand-tffs";
reg = <0x2c0000 0x840000>;
read-only;
};
partition@b00000 {
/* 'kernel1' in AVM firmware */
label = "uboot0";
reg = <0xb00000 0x400000>;
};
partition@f00000 {
/* 'kernel2' in AVM firmware */
label = "uboot1";
reg = <0xf00000 0x400000>;
};
partition@1300000 {
label = "ubi";
reg = <0x1300000 0x6d00000>;
};
};
};
};
&cryptobam {
status = "okay";
};
&blsp_dma {
status = "okay";
};
&blsp1_uart1 {
pinctrl-0 = <&serial_0_pins>;
pinctrl-names = "default";
status = "okay";
};
&qpic_bam {
status = "okay";
};
&wifi0 {
status = "okay";
qcom,ath10k-calibration-variant = "AVM-FRITZRepeater-1200";
};
&wifi1 {
status = "okay";
qcom,ath10k-calibration-variant = "AVM-FRITZRepeater-1200";
};
&gmac0 {
qcom,phy_mdio_addr = <0>;
qcom,poll_required = <1>;
vlan_tag = <0 0x20>;
};

267
target/linux/ipq40xx/files-4.19/arch/arm/boot/dts/qcom-ipq4019-fritzrepeater-1200.dts Normal file
View File

@ -0,0 +1,267 @@
// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
#include "qcom-ipq4019.dtsi"
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/input/input.h>
#include <dt-bindings/soc/qcom,tcsr.h>
/ {
model = "AVM FRITZ!Repeater 1200";
compatible = "avm,fritzrepeater-1200";
aliases {
led-boot = &power_green;
led-failsafe = &power_red;
led-running = &power_green;
led-upgrade = &power_red;
label-mac-device = &wifi0;
};
soc {
rng@22000 {
status = "okay";
};
mdio@90000 {
status = "okay";
pinctrl-0 = <&mdio_pins>;
pinctrl-names = "default";
};
tcsr@1949000 {
compatible = "qcom,tcsr";
reg = <0x1949000 0x100>;
qcom,wifi_glb_cfg = <TCSR_WIFI_GLB_CFG>;
};
ess_tcsr@1953000 {
compatible = "qcom,tcsr";
reg = <0x1953000 0x1000>;
qcom,ess-interface-select = <TCSR_ESS_PSGMII_RGMII5>;
};
tcsr@1957000 {
compatible = "qcom,tcsr";
reg = <0x1957000 0x100>;
qcom,wifi_noc_memtype_m0_m2 = <TCSR_WIFI_NOC_MEMTYPE_M0_M2>;
};
crypto@8e3a000 {
status = "okay";
};
watchdog@b017000 {
status = "okay";
};
ess-switch@c000000 {
switch_mac_mode = <0x3>; /* mac mode for RGMII RMII */
switch_lan_bmp = <0x0>; /* lan port bitmap */
switch_wan_bmp = <0x10>; /* wan port bitmap */
};
edma@c080000 {
status = "okay";
phy-mode = "rgmii-rxid";
qcom,num_gmac = <1>;
qcom,single-phy;
};
};
key {
compatible = "gpio-keys";
wps {
label = "WPS button";
gpios = <&tlmm 10 GPIO_ACTIVE_LOW>;
linux,code = <KEY_WPS_BUTTON>;
};
};
leds {
compatible = "gpio-leds";
power_red: power_red {
label = "fritzwlan-1200:red:power";
gpios = <&tlmm 50 GPIO_ACTIVE_LOW>;
};
power_green: power_green {
label = "fritzwlan-1200:green:power";
gpios = <&tlmm 45 GPIO_ACTIVE_HIGH>;
};
power_yellow {
label = "fritzwlan-1200:yellow:power";
gpios = <&tlmm 49 GPIO_ACTIVE_LOW>;
};
};
};
&tlmm {
serial_0_pins: serial_pinmux {
mux {
pins = "gpio16", "gpio17";
function = "blsp_uart0";
bias-disable;
};
};
nand_pins: nand_pins {
pullups {
pins = "gpio53", "gpio58", "gpio59";
function = "qpic";
bias-pull-up;
};
pulldowns {
pins = "gpio54", "gpio55", "gpio56",
"gpio57", "gpio60", "gpio61",
"gpio62", "gpio63", "gpio64",
"gpio65", "gpio66", "gpio67",
"gpio68", "gpio69";
function = "qpic";
bias-pull-down;
};
};
mdio_pins: mdio_pinmux {
mux_1 {
pins = "gpio6";
function = "mdio";
bias-pull-up;
};
mux_2 {
pins = "gpio7";
function = "mdc";
bias-pull-up;
};
};
phy-reset {
line-name = "PHY-reset";
gpios = <19 GPIO_ACTIVE_HIGH>;
gpio-hog;
output-high;
};
phy-reset-2 {
line-name = "PHY-reset-2";
gpios = <47 GPIO_ACTIVE_HIGH>;
gpio-hog;
output-high;
};
};
&nand {
pinctrl-0 = <&nand_pins>;
pinctrl-names = "default";
status = "okay";
nand@0 {
partitions {
compatible = "fixed-partitions";
#address-cells = <1>;
#size-cells = <1>;
partition@0 {
label = "SBL1";
reg = <0x0 0x80000>;
read-only;
};
partition@80000 {
label = "MIBIB";
reg = <0x80000 0x80000>;
read-only;
};
partition@100000 {
label = "QSEE";
reg = <0x100000 0x80000>;
read-only;
};
partition@180000 {
label = "CDT";
reg = <0x180000 0x40000>;
read-only;
};
partition@1c0000 {
label = "QSEE_B";
reg = <0x1c0000 0x80000>;
read-only;
};
partition@240000 {
label = "urlader0";
reg = <0x240000 0x40000>;
read-only;
};
partition@280000 {
label = "urlader1";
reg = <0x280000 0x40000>;
read-only;
};
partition@2c0000 {
label = "nand-tffs";
reg = <0x2c0000 0x840000>;
read-only;
};
partition@b00000 {
/* 'kernel1' in AVM firmware */
label = "uboot0";
reg = <0xb00000 0x400000>;
};
partition@f00000 {
/* 'kernel2' in AVM firmware */
label = "uboot1";
reg = <0xf00000 0x400000>;
};
partition@1300000 {
label = "ubi";
reg = <0x1300000 0x6d00000>;
};
};
};
};
&cryptobam {
status = "okay";
};
&blsp_dma {
status = "okay";
};
&blsp1_uart1 {
pinctrl-0 = <&serial_0_pins>;
pinctrl-names = "default";
status = "okay";
};
&qpic_bam {
status = "okay";
};
&wifi0 {
status = "okay";
qcom,ath10k-calibration-variant = "AVM-FRITZRepeater-1200";
};
&wifi1 {
status = "okay";
qcom,ath10k-calibration-variant = "AVM-FRITZRepeater-1200";
};
&gmac0 {
qcom,phy_mdio_addr = <0>;
qcom,poll_required = <1>;
vlan_tag = <0 0x20>;
};

10
target/linux/ipq40xx/image/Makefile
View File

@ -144,6 +144,16 @@ define Device/avm_fritzbox-7530
endef
TARGET_DEVICES += avm_fritzbox-7530
define Device/avm_fritzrepeater-1200
$(call Device/FitImageLzma)
DEVICE_VENDOR := AVM
DEVICE_MODEL := FRITZ!Repeater 1200
DEVICE_DTS := qcom-ipq4019-fritzrepeater-1200
DEVICE_PACKAGES := fritz-caldata fritz-tffs-nand ipq-wifi-avm_fritzrepeater-1200
IMAGES := sysupgrade.bin
endef
TARGET_DEVICES += avm_fritzrepeater-1200
define Device/avm_fritzrepeater-3000
$(call Device/FitImageLzma)
DEVICE_VENDOR := AVM

3
target/linux/ipq40xx/patches-4.14/901-arm-boot-add-dts-files.patch
View File

@ -10,7 +10,7 @@ Signed-off-by: John Crispin <john@phrozen.org>
--- a/arch/arm/boot/dts/Makefile
+++ b/arch/arm/boot/dts/Makefile
@@ -697,7 +697,30 @@ dtb-$(CONFIG_ARCH_QCOM) += \
@@ -697,7 +697,31 @@ dtb-$(CONFIG_ARCH_QCOM) += \
qcom-apq8074-dragonboard.dtb \
qcom-apq8084-ifc6540.dtb \
qcom-apq8084-mtp.dtb \
@ -30,6 +30,7 @@ Signed-off-by: John Crispin <john@phrozen.org>
+ qcom-ipq4019-a62.dtb \
+ qcom-ipq4019-ap.dk04.1-c1.dtb \
+ qcom-ipq4019-fritzbox-7530.dtb \
+ qcom-ipq4019-fritzrepeater-1200.dtb \
+ qcom-ipq4019-fritzrepeater-3000.dtb \
+ qcom-ipq4019-linksys_ea8300.dtb \
+ qcom-ipq4019-map-ac2200.dtb \

3
target/linux/ipq40xx/patches-4.19/901-arm-boot-add-dts-files.patch
View File

@ -12,7 +12,7 @@ diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
index b5bd3de87..5a52a0b19 100644
--- a/arch/arm/boot/dts/Makefile
+++ b/arch/arm/boot/dts/Makefile
@@ -785,11 +785,34 @@ dtb-$(CONFIG_ARCH_QCOM) += \
@@ -785,11 +785,35 @@ dtb-$(CONFIG_ARCH_QCOM) += \
qcom-apq8074-dragonboard.dtb \
qcom-apq8084-ifc6540.dtb \
qcom-apq8084-mtp.dtb \
@ -35,6 +35,7 @@ index b5bd3de87..5a52a0b19 100644
qcom-ipq4019-ap.dk07.1-c2.dtb \
+ qcom-ipq4019-a62.dtb \
+ qcom-ipq4019-fritzbox-7530.dtb \
+ qcom-ipq4019-fritzrepeater-1200.dtb \
+ qcom-ipq4019-fritzrepeater-3000.dtb \
+ qcom-ipq4019-linksys_ea8300.dtb \
+ qcom-ipq4019-map-ac2200.dtb \