Backups/immortalwrt-mt798x
1
0
Fork 0
mirror of https://github.com/hanwckf/immortalwrt-mt798x.git synced 2025-01-10 03:09:08 +08:00
Code Issues Actions Packages Projects Releases Wiki Activity

ath79: add support for TP-Link TL-WPA8630 v1

Browse Source 
This ports the TP-Link TL-WPA8630 v1 from ar71xx to ath79.

Specifications:

SoC: QCA9563
CPU: 750 MHz
Flash/RAM: 8 / 128 MiB
Ethernet: 3x 1G ports (QCA8337 switch)
WLAN: 2.4 GHz b/g/n, 5 GHz a/n/ac (ath10k)

Buttons, LEDs and network setup appear to be almost identical
to the v2 revision.

Powerline interface is connected to switch port 5 (Label LAN4).

Installation:

No "fresh" device was available for testing the factory image.

It is not known whether flashing via OEM firmware GUI is possible
or not. A discussion from 2018 [1] about that indicates a few
adjustments are necessary, but it is not clear whether those
are already implemented with the TPLINK_HEADER_VERSION = 2 or not.

Note that for the TL-WPA8630P v1, the TPLINK_HWID needs to be
changed to 0x86310001 to allow factory flashing.

[1] https://forum.openwrt.org/t/solved-tl-wpa8630p-lede-does-not-install/8161/27

Recovery:

Recovery is only possible via serial.

Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
This commit is contained in:
Adrian Schmutzler 2020-07-09 12:49:17 +02:00
parent 488da882f5
commit 7ef7dbaf70
8 changed files with 226 additions and 131 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

56
target/linux/ath79/dts/qca9563_tplink_tl-wpa8630-v1.dts Normal file
View File

@ -0,0 +1,56 @@
// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
/dts-v1/;
#include "qca9563_tplink_tl-wpa8630.dtsi"
/ {
compatible = "tplink,tl-wpa8630-v1", "qca,qca9563";
model = "TP-Link TL-WPA8630 v1";
aliases {
label-mac-device = &eth0;
};
};
&keys {
wifi {
label = "WiFi button";
linux,code = <KEY_RFKILL>;
gpios = <&gpio 8 GPIO_ACTIVE_LOW>;
debounce-interval = <60>;
};
};
&partitions {
uboot: partition@0 {
label = "u-boot";
reg = <0x000000 0x010000>;
read-only;
};
partition@10000 {
compatible = "tplink,firmware";
label = "firmware";
reg = <0x010000 0x7d0000>;
};
partition@7e0000 {
label = "mib0";
reg = <0x7e0000 0x010000>;
read-only;
};
art: partition@7f0000 {
label = "art";
reg = <0x7f0000 0x010000>;
read-only;
};
};
&eth0 {
mtd-mac-address = <&uboot 0x0fc00>;
};
&wmac {
mtd-mac-address = <&uboot 0x0fc00>;
};

122
target/linux/ath79/dts/qca9563_tplink_tl-wpa8630.dtsi Normal file
View File

@ -0,0 +1,122 @@
// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/input/input.h>
#include "qca956x.dtsi"
/ {
aliases {
led-boot = &led_power;
led-failsafe = &led_power;
led-running = &led_power;
led-upgrade = &led_power;
};
keys: keys {
compatible = "gpio-keys";
reset {
label = "Reset button";
linux,code = <KEY_RESTART>;
gpios = <&gpio 2 GPIO_ACTIVE_LOW>;
debounce-interval = <60>;
};
leds {
label = "LED control button";
linux,code = <BTN_0>;
gpios = <&gpio 6 GPIO_ACTIVE_LOW>;
debounce-interval = <60>;
};
pair {
label = "Pair button";
linux,code = <BTN_1>;
gpios = <&gpio 7 GPIO_ACTIVE_LOW>;
debounce-interval = <60>;
};
};
leds {
compatible = "gpio-leds";
led_power: power {
label = "tp-link:green:power";
gpios = <&gpio 1 GPIO_ACTIVE_LOW>;
};
lan {
label = "tp-link:green:lan";
gpios = <&gpio 5 GPIO_ACTIVE_LOW>;
};
wifi2g {
label = "tp-link:green:wifi2g";
gpios = <&gpio 19 GPIO_ACTIVE_LOW>;
linux,default-trigger = "phy1tpt";
};
wifi5g {
label = "tp-link:green:wifi5g";
gpios = <&gpio 21 GPIO_ACTIVE_LOW>;
linux,default-trigger = "phy0tpt";
};
};
};
&spi {
status = "okay";
num-cs = <1>;
flash@0 {
compatible = "jedec,spi-nor";
reg = <0>;
spi-max-frequency = <25000000>;
partitions: partitions {
compatible = "fixed-partitions";
#address-cells = <1>;
#size-cells = <1>;
};
};
};
&pcie {
status = "okay";
};
&uart {
status = "okay";
};
&mdio0 {
status = "okay";
phy-mask = <0>;
phy0: ethernet-phy@0 {
reg = <0>;
phy-mode = "sgmii";
qca,mib-poll-interval = <500>;
qca,ar8327-initvals = <
0x04 0x00080080 /* PORT0 PAD MODE CTRL */
0x7c 0x0000007e /* PORT0_STATUS */
>;
};
};
&eth0 {
status = "okay";
phy-handle = <&phy0>;
phy-mode = "sgmii";
};
&wmac {
status = "okay";
mtd-cal-data = <&art 0x1000>;
};

158
target/linux/ath79/dts/qca9563_tplink_tl-wpa8630p-v2.dtsi
View File

@ -1,45 +1,12 @@
// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/input/input.h>
#include "qca956x.dtsi"
#include "qca9563_tplink_tl-wpa8630.dtsi"
/ {
aliases {
led-boot = &led_power;
led-failsafe = &led_power;
led-running = &led_power;
led-upgrade = &led_power;
label-mac-device = &eth0;
};
leds {
compatible = "gpio-leds";
led_power: power {
label = "tp-link:green:power";
gpios = <&gpio 1 GPIO_ACTIVE_LOW>;
};
wifi2g {
label = "tp-link:green:wifi2g";
gpios = <&gpio 19 GPIO_ACTIVE_LOW>;
linux,default-trigger = "phy1tpt";
};
wifi5g {
label = "tp-link:green:wifi5g";
gpios = <&gpio 21 GPIO_ACTIVE_LOW>;
linux,default-trigger = "phy0tpt";
};
lan {
label = "tp-link:green:lan";
gpios = <&gpio 5 GPIO_ACTIVE_LOW>;
};
};
gpio-export {
compatible = "gpio-export";
@ -48,118 +15,47 @@
gpios = <&gpio 14 GPIO_ACTIVE_HIGH>;
};
};
};
keys {
compatible = "gpio-keys";
reset {
label = "Reset button";
linux,code = <KEY_RESTART>;
gpios = <&gpio 2 GPIO_ACTIVE_LOW>;
debounce-interval = <60>;
};
pair {
label = "Pair button";
linux,code = <BTN_1>;
gpios = <&gpio 7 GPIO_ACTIVE_LOW>;
debounce-interval = <60>;
};
leds {
label = "LED control button";
linux,code = <BTN_0>;
gpios = <&gpio 6 GPIO_ACTIVE_LOW>;
debounce-interval = <60>;
};
wps {
label = "WPS button";
linux,code = <KEY_WPS_BUTTON>;
gpios = <&gpio 8 GPIO_ACTIVE_LOW>;
debounce-interval = <60>;
};
&keys {
wps {
label = "WPS button";
linux,code = <KEY_WPS_BUTTON>;
gpios = <&gpio 8 GPIO_ACTIVE_LOW>;
debounce-interval = <60>;
};
};
&spi {
status = "okay";
num-cs = <1>;
flash@0 {
compatible = "jedec,spi-nor";
reg = <0>;
spi-max-frequency = <25000000>;
partitions: partitions {
compatible = "fixed-partitions";
#address-cells = <1>;
#size-cells = <1>;
partition@0 {
label = "factory-uboot";
reg = <0x000000 0x020000>;
read-only;
};
partition@20000 {
label = "u-boot";
reg = <0x020000 0x020000>;
read-only;
};
partition@40000 {
compatible = "tplink,firmware";
label = "firmware";
reg = <0x040000 0x5e0000>;
};
partition@620000 {
label = "partition-table";
reg = <0x620000 0x010000>;
read-only;
};
};
&partitions {
partition@0 {
label = "factory-uboot";
reg = <0x000000 0x020000>;
read-only;
};
};
&pcie {
status = "okay";
};
partition@20000 {
label = "u-boot";
reg = <0x020000 0x020000>;
read-only;
};
&uart {
status = "okay";
};
partition@40000 {
compatible = "tplink,firmware";
label = "firmware";
reg = <0x040000 0x5e0000>;
};
&mdio0 {
status = "okay";
phy-mask = <0>;
phy0: ethernet-phy@0 {
reg = <0>;
phy-mode = "sgmii";
qca,mib-poll-interval = <500>;
qca,ar8327-initvals = <
0x04 0x00080080 /* PORT0 PAD MODE CTRL */
0x7c 0x0000007e /* PORT0_STATUS */
>;
partition@620000 {
label = "partition-table";
reg = <0x620000 0x010000>;
read-only;
};
};
&eth0 {
status = "okay";
phy-handle = <&phy0>;
phy-mode = "sgmii";
mtd-mac-address = <&mac 0x8>;
};
&wmac {
status = "okay";
mtd-cal-data = <&art 0x1000>;
mtd-mac-address = <&mac 0x8>;
};

1
target/linux/ath79/generic/base-files/etc/board.d/01_leds
View File

@ -297,6 +297,7 @@ tplink,tl-mr6400-v1)
ucidef_set_led_netdev "wan" "WAN" "tp-link:white:wan" "eth1"
ucidef_set_led_netdev "4g" "4G" "tp-link:white:4g" "usb0"
;;
tplink,tl-wpa8630-v1|\
tplink,tl-wpa8630p-v2-eu|\
tplink,tl-wpa8630p-v2-int)
ucidef_set_led_switch "lan" "LAN" "tp-link:green:lan" "switch0" "0x3c"

1
target/linux/ath79/generic/base-files/etc/board.d/02_network
View File

@ -294,6 +294,7 @@ ath79_setup_interfaces()
ucidef_add_switch "switch0" \
"0@eth0" "1:lan:1" "2:lan:3" "3:lan:2"
;;
tplink,tl-wpa8630-v1|\
tplink,tl-wpa8630p-v2-eu|\
tplink,tl-wpa8630p-v2-int)
# port 5 (internal) is the power-line port

4
target/linux/ath79/generic/base-files/etc/hotplug.d/firmware/11-ath10k-caldata
View File

@ -129,6 +129,10 @@ case "$FIRMWARE" in
caldata_extract "art" 0x5000 0x844
ath10k_patch_mac $(macaddr_add $(mtd_get_mac_binary info 0x8) +1)
;;
tplink,tl-wpa8630-v1)
caldata_extract "art" 0x5000 0x844
ath10k_patch_mac $(macaddr_add $(mtd_get_mac_binary u-boot 0x0fc00) +1)
;;
tplink,tl-wr902ac-v1)
caldata_extract "art" 0x5000 0x844
ath10k_patch_mac $(macaddr_add $(mtd_get_mac_binary tplink 0x8) -1)

4
target/linux/ath79/generic/base-files/etc/uci-defaults/04_led_migration
View File

@ -45,6 +45,10 @@ tplink,re355-v1)
tplink,re450-v1)
migrate_leds "re450:=tp-link:"
;;
tplink,tl-wpa8630-v1)
migrate_leds "^tl-wpa8630:=tp-link:" \
':wlan$=:wifi2g' ':wlan5$=:wifi5g'
;;
wd,mynet-n750)
migrate_leds "wd:=mynet-n750:"
;;

11
target/linux/ath79/image/generic-tp-link.mk
View File

@ -500,6 +500,17 @@ define Device/tplink_tl-wdr4900-v2
endef
TARGET_DEVICES += tplink_tl-wdr4900-v2
define Device/tplink_tl-wpa8630-v1
$(Device/tplink-8mlzma)
SOC := qca9563
DEVICE_MODEL := TL-WPA8630
DEVICE_VARIANT := v1
DEVICE_PACKAGES := kmod-ath10k-ct ath10k-firmware-qca988x-ct
TPLINK_HWID := 0x86300001
SUPPORTED_DEVICES += tl-wpa8630
endef
TARGET_DEVICES += tplink_tl-wpa8630-v1
define Device/tplink_tl-wpa8630p-v2
$(Device/tplink-safeloader)
SOC := qca9563