mediatek: add iKuai-Q3000 model support; (#291)

Co-authored-by: seer300 <youremail@eg.com>
Co-authored-by: hanwckf <hanwckf@vip.qq.com>

target/linux/mediatek/files-5.4/arch/arm64/boot/dts/mediatek/mt7981-ikuai-q3000.dts

@@ -0,0 +1,330 @@
+/dts-v1/;
+#include "mt7981.dtsi"
+/ {
+	compatible = "ikuai,q3000", "mediatek,mt7981-spim-snand-rfb";
+	model = "q3000";
+
+	aliases {
+		led-boot = &red_led;
+		led-failsafe = &red_led;
+		led-running = &green_led;
+		led-upgrade = &blue_led;
+	};
+
+	chosen {
+		bootargs = "console=ttyS0,115200n1 loglevel=8 earlycon=uart8250,mmio32,0x11002000 clk_ignore_unused";
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+		reset {
+			label = "reset";
+			linux,code = <KEY_RESTART>;
+			gpios = <&pio 1 GPIO_ACTIVE_LOW>;
+		};
+
+		wps {
+			label = "wps";
+			linux,code = <KEY_WPS_BUTTON>;
+			gpios = <&pio 0 GPIO_ACTIVE_LOW>;
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		green_led: green {
+			label = "q3000:green";
+			gpios = <&pio 11 1>;
+		};
+
+		red_led: red {
+			label = "q3000:red";
+			gpios = <&pio 10 1>;
+		};
+
+		blue_led: blue {
+			label = "q3000:blue";
+			gpios = <&pio 12 1>;
+		};
+	};
+
+	nmbm_spim_nand {
+		compatible = "generic,nmbm";
+
+		#address-cells = <1>;
+		#size-cells = <1>;
+
+		lower-mtd-device = <&spi_nand>;
+		forced-create;
+
+		partitions {
+			compatible = "fixed-partitions";
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			partition@0 {
+				label = "BL2";
+				reg = <0x00000 0x0100000>;
+				read-only;
+			};
+
+			partition@100000 {
+				label = "u-boot-env";
+				reg = <0x0100000 0x0080000>;
+			};
+
+			partition@180000 {
+				label = "Factory";
+				reg = <0x180000 0x0200000>;
+			};
+
+			partition@380000 {
+				label = "FIP";
+				reg = <0x380000 0x0200000>;
+			};
+
+			partition@580000 {
+				label = "ubi";
+				reg = <0x580000 0x4000000>;
+			};
+		};
+	};
+
+	sound_wm8960 {
+		compatible = "mediatek,mt79xx-wm8960-machine";
+		mediatek,platform = <&afe>;
+		audio-routing = "Headphone", "HP_L",
+				"Headphone", "HP_R",
+				"LINPUT1", "AMIC",
+				"RINPUT1", "AMIC";
+		mediatek,audio-codec = <&wm8960>;
+		status = "disabled";
+	};
+
+	sound_si3218x {
+		compatible = "mediatek,mt79xx-si3218x-machine";
+		mediatek,platform = <&afe>;
+		mediatek,ext-codec = <&proslic_spi>;
+		status = "disabled";
+	};
+};
+
+&afe {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pcm_pins>;
+	status = "okay";
+};
+
+&i2c0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c_pins>;
+	status = "disabled";
+
+	wm8960: wm8960@1a {
+		compatible = "wlf,wm8960";
+		reg = <0x1a>;
+	};
+};
+
+&uart0 {
+	status = "okay";
+};
+
+&watchdog {
+	status = "okay";
+};
+
+&eth {
+	status = "okay";
+
+	gmac0: mac@0 {
+		compatible = "mediatek,eth-mac";
+		reg = <0>;
+		phy-mode = "2500base-x";
+
+		fixed-link {
+			speed = <2500>;
+			full-duplex;
+			pause;
+		};
+	};
+
+
+	mdio: mdio-bus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		switch@0 {
+			compatible = "mediatek,mt7531";
+			reg = <31>;
+			reset-gpios = <&pio 39 0>;
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@0 {
+					reg = <0>;
+					label = "lan1";
+				};
+
+				port@1 {
+					reg = <1>;
+					label = "lan2";
+				};
+
+				port@2 {
+					reg = <2>;
+					label = "lan3";
+				};
+
+				port@3 {
+					reg = <3>;
+					label = "wan";
+				};
+
+				port@6 {
+					reg = <6>;
+					label = "cpu";
+					ethernet = <&gmac0>;
+					phy-mode = "2500base-x";
+
+					fixed-link {
+						speed = <2500>;
+						full-duplex;
+						pause;
+					};
+				};
+			};
+		};
+	};
+};
+
+&hnat {
+	mtketh-wan = "wan";
+	mtketh-lan = "lan";
+	mtketh-max-gmac = <2>;
+	status = "okay";
+};
+
+&spi0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&spi0_flash_pins>;
+	status = "okay";
+	spi_nand: spi_nand@0 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "spi-nand";
+		reg = <0>;
+		spi-max-frequency = <52000000>;
+		spi-tx-buswidth = <4>;
+		spi-rx-buswidth = <4>;
+	};
+};
+
+&spi1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&spic_pins>;
+	status = "okay";
+
+	proslic_spi: proslic_spi@0 {
+		compatible = "silabs,proslic_spi";
+		reg = <0>;
+		spi-max-frequency = <10000000>;
+		spi-cpha = <1>;
+		spi-cpol = <1>;
+		channel_count = <1>;
+		debug_level = <4>;       /* 1 = TRC, 2 = DBG, 4 = ERR */
+		reset_gpio = <&pio 15 0>;
+		ig,enable-spi = <1>;     /* 1: Enable, 0: Disable */
+	};
+};
+
+&pio {
+	i2c_pins: i2c-pins-g0 {
+		mux {
+			function = "i2c";
+			groups = "i2c0_0";
+		};
+	};
+
+	pcm_pins: pcm-pins-g0 {
+		mux {
+			function = "pcm";
+			groups = "pcm";
+		};
+	};
+
+	pwm0_pin: pwm0-pin-g0 {
+		mux {
+			function = "pwm";
+			groups = "pwm0_0";
+		};
+	};
+
+	pwm1_pin: pwm1-pin-g0 {
+		mux {
+			function = "pwm";
+			groups = "pwm1_0";
+		};
+	};
+
+	pwm2_pin: pwm2-pin {
+		mux {
+			function = "pwm";
+			groups = "pwm2";
+		};
+	};
+
+	spi0_flash_pins: spi0-pins {
+		mux {
+			function = "spi";
+			groups = "spi0", "spi0_wp_hold";
+		};
+
+		conf-pu {
+			pins = "SPI0_CS", "SPI0_HOLD", "SPI0_WP";
+			drive-strength = <MTK_DRIVE_8mA>;
+			bias-pull-up = <MTK_PUPD_SET_R1R0_11>;
+		};
+
+		conf-pd {
+			pins = "SPI0_CLK", "SPI0_MOSI", "SPI0_MISO";
+			drive-strength = <MTK_DRIVE_8mA>;
+			bias-pull-down = <MTK_PUPD_SET_R1R0_11>;
+		};
+	};
+
+	spic_pins: spi1-pins {
+		mux {
+			function = "spi";
+			groups = "spi1_1";
+		};
+	};
+
+	uart1_pins: uart1-pins-g1 {
+		mux {
+			function = "uart";
+			groups = "uart1_1";
+		};
+	};
+
+	uart2_pins: uart2-pins-g1 {
+		mux {
+			function = "uart";
+			groups = "uart2_1";
+		};
+	};
+};
+
+&xhci {
+	mediatek,u3p-dis-msk = <0x0>;
+	phys = <&u2port0 PHY_TYPE_USB2>,
+	       <&u3port0 PHY_TYPE_USB3>;
+	status = "okay";
+};
+
+&trng {
+	status = "disabled";
+};

target/linux/mediatek/image/mt7981.mk

@@ -501,6 +501,23 @@ define Device/jcg_q30
 endef
 TARGET_DEVICES += jcg_q30
 
+define Device/ikuai_q3000
+  DEVICE_VENDOR := iKuai
+  DEVICE_MODEL := Q3000
+  DEVICE_DTS := mt7981-ikuai-q3000
+  DEVICE_DTS_DIR := $(DTS_DIR)/mediatek
+  SUPPORTED_DEVICES := ikuai,q3000
+  UBINIZE_OPTS := -E 5
+  BLOCKSIZE := 128k
+  PAGESIZE := 2048
+  IMAGE_SIZE := 114816k
+  KERNEL_IN_UBI := 1
+  IMAGES += factory.bin
+  IMAGE/factory.bin := append-ubi | check-size $$$$(IMAGE_SIZE)
+  IMAGE/sysupgrade.bin := sysupgrade-tar | append-metadata
+endef
+TARGET_DEVICES += ikuai_q3000
+
 define Device/livinet_zr-3020
   DEVICE_VENDOR := Livinet
   DEVICE_MODEL := ZR-3020

target/linux/mediatek/mt7981/base-files/etc/board.d/01_leds

@@ -43,6 +43,11 @@ h3c,nx30pro)
 	ucidef_set_led_default "green" "GREEN" "nx30pro:green" "1"
 	ucidef_set_led_default "red" "RED" "nx30pro:red" "0"
 	;;
+ikuai,q3000)
+	ucidef_set_led_default "green" "GREEN" "q3000:green" "1"
+	ucidef_set_led_default "blue" "BLUE" "q3000:blue" "0"
+	ucidef_set_led_default "red" "RED" "q3000:red" "0"
+	;;
 konka,komi-a31)
         ucidef_set_led_netdev "blue" "BLUE" "blue:status" "eth1" "link"
 	;;

target/linux/mediatek/mt7981/base-files/etc/board.d/02_network

@@ -82,6 +82,7 @@ mediatek_setup_interfaces()
 	nradio,wt9103)
 		ucidef_set_interfaces_lan_wan "lan1 lan2 lan3 lan4" eth1
 		;;
+	ikuai,q3000 |\
 	ruijie,rg-x30e*)
 		ucidef_set_interfaces_lan_wan "lan1 lan2 lan3" wan
 		;;
@@ -241,6 +242,10 @@ mediatek_setup_macs()
 		label_mac=$wan_mac
 		local wifi_mac="$(mtd_get_mac_binary $part_name 0x04)"
 		;;
+	ikuai,q3000)
+		wan_mac=$(mtd_get_mac_binary $part_name 0x10048)
+		lan_mac=$(macaddr_add $wan_mac 1)
+    ;;
 	ruijie,rg-x30e*)
 		label_mac=$(mtd_get_mac_ascii product_info ethaddr)
 		wan_mac=$label_mac