mirror of
https://github.com/hanwckf/immortalwrt-mt798x.git
synced 2025-01-10 03:09:08 +08:00
ath79: add support for TP-Link TL-WA850RE v1
This ports support for the TL-WA850RE v1 range extender from ar71xx to ath79. Specifications: Board: AP123 / AR9341 rev. 3 Flash/RAM: 4/32 MiB CPU: 535 MHz WiFi: 2.4 GHz b/g/n Ethernet: 1 port (100M) Flashing instructions: Upload the factory image via the vendor firmware upgrade option. Recovery: Note that this device does not provide TFTP via ethernet like many other TP-Link devices do. You will have to open the case if you require recovery beyond failsafe. Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
This commit is contained in:
parent
3d6c571083
commit
6eaea3a8ba
82
target/linux/ath79/dts/ar9341_tplink_tl-wa.dtsi
Normal file
82
target/linux/ath79/dts/ar9341_tplink_tl-wa.dtsi
Normal file
@ -0,0 +1,82 @@
|
||||
// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
|
||||
|
||||
#include <dt-bindings/gpio/gpio.h>
|
||||
#include <dt-bindings/input/input.h>
|
||||
|
||||
#include "ar9341.dtsi"
|
||||
|
||||
/ {
|
||||
aliases {
|
||||
serial0 = &uart;
|
||||
label-mac-device = &wmac;
|
||||
};
|
||||
};
|
||||
|
||||
&ref {
|
||||
clock-frequency = <25000000>;
|
||||
};
|
||||
|
||||
&spi {
|
||||
status = "okay";
|
||||
|
||||
num-cs = <1>;
|
||||
|
||||
flash@0 {
|
||||
compatible = "jedec,spi-nor";
|
||||
reg = <0>;
|
||||
spi-max-frequency = <25000000>;
|
||||
|
||||
partitions {
|
||||
compatible = "fixed-partitions";
|
||||
#address-cells = <1>;
|
||||
#size-cells = <1>;
|
||||
|
||||
uboot: partition@0 {
|
||||
label = "u-boot";
|
||||
reg = <0x000000 0x020000>;
|
||||
read-only;
|
||||
};
|
||||
|
||||
partition@20000 {
|
||||
compatible = "tplink,firmware";
|
||||
label = "firmware";
|
||||
reg = <0x020000 0x3d0000>;
|
||||
};
|
||||
|
||||
art: partition@3f0000 {
|
||||
label = "art";
|
||||
reg = <0x3f0000 0x010000>;
|
||||
read-only;
|
||||
};
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&uart {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
ð0 {
|
||||
status = "okay";
|
||||
|
||||
phy-handle = <&swphy0>;
|
||||
|
||||
mtd-mac-address = <&uboot 0x1fc00>;
|
||||
|
||||
gmac-config {
|
||||
device = <&gmac>;
|
||||
|
||||
switch-phy-swap = <1>;
|
||||
};
|
||||
};
|
||||
|
||||
ð1 {
|
||||
compatible = "syscon", "simple-mfd";
|
||||
};
|
||||
|
||||
&wmac {
|
||||
status = "okay";
|
||||
|
||||
mtd-cal-data = <&art 0x1000>;
|
||||
mtd-mac-address = <&uboot 0x1fc00>;
|
||||
};
|
79
target/linux/ath79/dts/ar9341_tplink_tl-wa850re-v1.dts
Normal file
79
target/linux/ath79/dts/ar9341_tplink_tl-wa850re-v1.dts
Normal file
@ -0,0 +1,79 @@
|
||||
// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
|
||||
/dts-v1/;
|
||||
|
||||
#include "ar9341_tplink_tl-wa.dtsi"
|
||||
|
||||
/ {
|
||||
model = "TP-Link TL-WA850RE v1";
|
||||
compatible = "tplink,tl-wa850re-v1", "qca,ar9341";
|
||||
|
||||
aliases {
|
||||
led-boot = &led_re;
|
||||
led-failsafe = &led_re;
|
||||
led-running = &led_re;
|
||||
led-upgrade = &led_re;
|
||||
};
|
||||
|
||||
keys {
|
||||
compatible = "gpio-keys";
|
||||
|
||||
reset {
|
||||
label = "Reset";
|
||||
linux,code = <KEY_RESTART>;
|
||||
gpios = <&gpio 17 GPIO_ACTIVE_LOW>;
|
||||
debounce-interval = <60>;
|
||||
};
|
||||
|
||||
wps {
|
||||
label = "WPS";
|
||||
linux,code = <KEY_WPS_BUTTON>;
|
||||
gpios = <&gpio 16 GPIO_ACTIVE_LOW>;
|
||||
debounce-interval = <60>;
|
||||
};
|
||||
};
|
||||
|
||||
leds {
|
||||
compatible = "gpio-leds";
|
||||
|
||||
lan {
|
||||
label = "tp-link:blue:lan";
|
||||
gpios = <&gpio 20 GPIO_ACTIVE_LOW>;
|
||||
};
|
||||
|
||||
wlan {
|
||||
label = "tp-link:blue:wlan";
|
||||
gpios = <&gpio 13 GPIO_ACTIVE_LOW>;
|
||||
linux,default-trigger = "phy0tpt";
|
||||
};
|
||||
|
||||
led_re: re {
|
||||
label = "tp-link:blue:re";
|
||||
gpios = <&gpio 15 GPIO_ACTIVE_LOW>;
|
||||
};
|
||||
|
||||
signal1 {
|
||||
label = "tp-link:blue:signal1";
|
||||
gpios = <&gpio 0 GPIO_ACTIVE_LOW>;
|
||||
};
|
||||
|
||||
signal2 {
|
||||
label = "tp-link:blue:signal2";
|
||||
gpios = <&gpio 1 GPIO_ACTIVE_LOW>;
|
||||
};
|
||||
|
||||
signal3 {
|
||||
label = "tp-link:blue:signal3";
|
||||
gpios = <&gpio 2 GPIO_ACTIVE_LOW>;
|
||||
};
|
||||
|
||||
signal4 {
|
||||
label = "tp-link:blue:signal4";
|
||||
gpios = <&gpio 3 GPIO_ACTIVE_LOW>;
|
||||
};
|
||||
|
||||
signal5 {
|
||||
label = "tp-link:blue:signal5";
|
||||
gpios = <&gpio 4 GPIO_ACTIVE_LOW>;
|
||||
};
|
||||
};
|
||||
};
|
@ -66,6 +66,17 @@ define Device/tplink_tl-mr3420-v2
|
||||
endef
|
||||
TARGET_DEVICES += tplink_tl-mr3420-v2
|
||||
|
||||
define Device/tplink_tl-wa850re-v1
|
||||
$(Device/tplink-4mlzma)
|
||||
SOC := ar9341
|
||||
DEVICE_MODEL := TL-WA850RE
|
||||
DEVICE_VARIANT := v1
|
||||
TPLINK_HWID := 0x08500001
|
||||
DEVICE_PACKAGES := rssileds
|
||||
SUPPORTED_DEVICES += tl-wa850re
|
||||
endef
|
||||
TARGET_DEVICES += tplink_tl-wa850re-v1
|
||||
|
||||
define Device/tplink_tl-wa901nd-v2
|
||||
$(Device/tplink-4m)
|
||||
SOC := ar9132
|
||||
|
@ -54,6 +54,15 @@ tplink,tl-wr841-v8)
|
||||
ucidef_set_led_switch "lan3" "LAN3" "tp-link:green:lan3" "switch0" "0x10"
|
||||
ucidef_set_led_switch "lan4" "LAN4" "tp-link:green:lan4" "switch0" "0x02"
|
||||
;;
|
||||
tplink,tl-wa850re-v1)
|
||||
ucidef_set_led_netdev "lan" "LAN" "tp-link:blue:lan" "eth0"
|
||||
ucidef_set_rssimon "wlan0" "200000" "1"
|
||||
ucidef_set_led_rssi "rssilow" "RSSILOW" "tp-link:blue:signal1" "wlan0" "1" "100"
|
||||
ucidef_set_led_rssi "rssimediumlow" "RSSIMEDIUMLOW" "tp-link:blue:signal2" "wlan0" "20" "100"
|
||||
ucidef_set_led_rssi "rssimedium" "RSSIMEDIUM" "tp-link:blue:signal3" "wlan0" "40" "100"
|
||||
ucidef_set_led_rssi "rssimediumhigh" "RSSIMEDIUMHIGH" "tp-link:blue:signal4" "wlan0" "60" "100"
|
||||
ucidef_set_led_rssi "rssihigh" "RSSIHIGH" "tp-link:blue:signal5" "wlan0" "80" "100"
|
||||
;;
|
||||
tplink,tl-wr740n-v1|\
|
||||
tplink,tl-wr740n-v3|\
|
||||
tplink,tl-wr741-v1|\
|
||||
|
@ -32,6 +32,7 @@ ath79_setup_interfaces()
|
||||
tplink,tl-mr10u|\
|
||||
tplink,tl-mr3020-v1|\
|
||||
tplink,tl-mr3040-v2|\
|
||||
tplink,tl-wa850re-v1|\
|
||||
tplink,tl-wa901nd-v2|\
|
||||
tplink,tl-wr703n)
|
||||
ucidef_set_interface_lan "eth0"
|
||||
|
Loading…
x
Reference in New Issue
Block a user