mirror of
https://github.com/hanwckf/immortalwrt-mt798x.git
synced 2025-01-09 02:43:53 +08:00
ath79: add support for Aerohive HiveAP 121
This commit adds support for the Aerohive HiveAP-121. It was previously already supported in the ar71xx subtarget. The following is copied from the commit which added ar71xx support: Specification: - SoC: Atheros AR9344-BC2A at 560MHz - WiFi 1: 2.4GHz Atheros AR9340? - SoC - WiFi 2: 5.0GHz Atheros AR9382-AL1A - Memory: 128MB from 2x Nanya NT5TU32M16DG-AC - SPI: 1MB Macronix MX25L8006E - NAND: 128MB Hynix H27U1G8F2BTR-BC - Ethernet: Atheros AR8035-A - USB: 1x 2.0 - TPM: Atmel SC3204 Flashing: 1. Hook into UART (9600 baud) and enter U-Boot. You may need to enter a password of administrator or AhNf?d@ta06 if prompted. 2. Once in U-Boot, download and flash LEDE factory image over tftp: dhcp; setenv serverip tftp-server-ip; tftpboot 0x81000000 lede-ar71xx-nand-hiveap-121-squashfs-factory.bin; nand erase 0x800000 0x800000; nand write 0x81000000 0x800000 0x800000; reset; Signed-off-by: David Bauer <mail@david-bauer.net>
This commit is contained in:
David Bauer
parent
08a134820f
commit
62db255543
237
target/linux/ath79/dts/ar9344_aerohive_hiveap-121.dts
Normal file
237
target/linux/ath79/dts/ar9344_aerohive_hiveap-121.dts
Normal file
@ -0,0 +1,237 @@
|
||||
// SPDX-License-Identifier: GPL-2.0
|
||||
/dts-v1/;
|
||||
|
||||
#include <dt-bindings/gpio/gpio.h>
|
||||
#include <dt-bindings/input/input.h>
|
||||
|
||||
#include "ar9344.dtsi"
|
||||
|
||||
/ {
|
||||
compatible = "aerohive,hiveap-121", "qca,ar9344";
|
||||
model = "Aerohive HiveAP 121";
|
||||
|
||||
aliases {
|
||||
led-boot = &power_white;
|
||||
led-failsafe = &power_orange;
|
||||
led-running = &power_white;
|
||||
led-upgrade = &power_orange;
|
||||
label-mac-device = ð0;
|
||||
};
|
||||
|
||||
chosen {
|
||||
bootargs = "console=ttyS0,9600";
|
||||
};
|
||||
|
||||
keys {
|
||||
compatible = "gpio-keys";
|
||||
|
||||
reset {
|
||||
label = "Reset button";
|
||||
linux,code = <KEY_RESTART>;
|
||||
gpios = <&gpio 4 GPIO_ACTIVE_LOW>;
|
||||
debounce-interval = <60>;
|
||||
};
|
||||
};
|
||||
|
||||
leds {
|
||||
compatible = "gpio-leds";
|
||||
|
||||
power_orange: power_orange {
|
||||
label = "hiveap-121:orange:power";
|
||||
gpios = <&gpio 14 GPIO_ACTIVE_LOW>;
|
||||
};
|
||||
|
||||
power_white: power_white {
|
||||
label = "hiveap-121:white:power";
|
||||
gpios = <&gpio 21 GPIO_ACTIVE_LOW>;
|
||||
};
|
||||
};
|
||||
|
||||
i2c {
|
||||
compatible = "i2c-gpio";
|
||||
gpios = <&gpio 13 GPIO_ACTIVE_HIGH /* sda */
|
||||
&gpio 12 GPIO_ACTIVE_HIGH /* scl */
|
||||
>;
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
|
||||
tpm@29 {
|
||||
compatible = "atmel,at97sc3204t";
|
||||
reg = <0x29>;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&ref {
|
||||
clock-frequency = <40000000>;
|
||||
};
|
||||
|
||||
&uart {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&gpio {
|
||||
status = "okay";
|
||||
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&jtag_disable_pins>;
|
||||
|
||||
gpio_ext_lna0 {
|
||||
gpio-hog;
|
||||
gpios = <20 0>;
|
||||
output-low;
|
||||
line-name = "hiveap-121:ext:lna0";
|
||||
};
|
||||
|
||||
gpio_ext_lna1 {
|
||||
gpio-hog;
|
||||
gpios = <19 0>;
|
||||
output-low;
|
||||
line-name = "hiveap-121:ext:lna1";
|
||||
};
|
||||
|
||||
gpio_usb_power {
|
||||
gpio-hog;
|
||||
gpios = <15 0>;
|
||||
output-high;
|
||||
line-name = "hiveap-121:power:usb";
|
||||
};
|
||||
};
|
||||
|
||||
&usb {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&usb_phy {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&pcie {
|
||||
status = "okay";
|
||||
|
||||
wifi@0,0 {
|
||||
compatible = "pci168c,0030";
|
||||
reg = <0x0000 0 0 0 0>;
|
||||
|
||||
mtd-mac-address = <&hw_info 0x0>;
|
||||
mtd-mac-address-increment = <2>;
|
||||
};
|
||||
};
|
||||
|
||||
&spi {
|
||||
status = "okay";
|
||||
num-cs = <1>;
|
||||
|
||||
flash@0 {
|
||||
compatible = "jedec,spi-nor";
|
||||
reg = <0>;
|
||||
spi-max-frequency = <25000000>;
|
||||
|
||||
partitions {
|
||||
compatible = "fixed-partitions";
|
||||
#address-cells = <1>;
|
||||
#size-cells = <1>;
|
||||
|
||||
partition@0 {
|
||||
label = "u-boot";
|
||||
reg = <0x000000 0x80000>;
|
||||
read-only;
|
||||
};
|
||||
|
||||
partition@80000 {
|
||||
label = "u-boot-env";
|
||||
reg = <0x80000 0x10000>;
|
||||
read-only;
|
||||
};
|
||||
|
||||
hw_info: partition@90000 {
|
||||
label = "hw-info";
|
||||
reg = <0x90000 0x10000>;
|
||||
read-only;
|
||||
};
|
||||
|
||||
partition@a0000 {
|
||||
label = "boot-info";
|
||||
reg = <0xa0000 0x10000>;
|
||||
read-only;
|
||||
};
|
||||
|
||||
partition@b0000 {
|
||||
label = "boot-sinfo";
|
||||
reg = <0xb0000 0x10000>;
|
||||
read-only;
|
||||
};
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&wmac {
|
||||
status = "okay";
|
||||
|
||||
mtd-mac-address = <&hw_info 0x0>;
|
||||
mtd-mac-address-increment = <1>;
|
||||
};
|
||||
|
||||
&nand {
|
||||
status = "okay";
|
||||
|
||||
partitions {
|
||||
compatible = "fixed-partitions";
|
||||
#address-cells = <1>;
|
||||
#size-cells = <1>;
|
||||
|
||||
partition@0 {
|
||||
label = "u-boot1";
|
||||
reg = <0x0 0x400000>;
|
||||
read-only;
|
||||
};
|
||||
|
||||
partition@400000 {
|
||||
label = "u-boot-env1";
|
||||
reg = <0x400000 0x400000>;
|
||||
read-only;
|
||||
};
|
||||
|
||||
partition@800000 {
|
||||
label = "kernel";
|
||||
reg = <0x800000 0x500000>;
|
||||
};
|
||||
|
||||
partition@d00000 {
|
||||
label = "ubi";
|
||||
reg = <0xd00000 0x6f00000>;
|
||||
};
|
||||
|
||||
partition@2e00000 {
|
||||
label = "wifi-info";
|
||||
reg = <0x7c00000 0x400000>;
|
||||
read-only;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&mdio0 {
|
||||
status = "okay";
|
||||
|
||||
phy0: ethernet-phy@0 {
|
||||
reg = <0>;
|
||||
};
|
||||
};
|
||||
|
||||
ð0 {
|
||||
status = "okay";
|
||||
|
||||
pll-data = <0x06000000 0x00000101 0x00001313>;
|
||||
|
||||
mtd-mac-address = <&hw_info 0x0>;
|
||||
|
||||
phy-mode = "rgmii-id";
|
||||
phy-handle = <&phy0>;
|
||||
|
||||
gmac-config {
|
||||
device = <&gmac>;
|
||||
rgmii-gmac0 = <1>;
|
||||
rxd-delay = <1>;
|
||||
rxdv-delay = <1>;
|
||||
};
|
||||
};
|
||||
@ -26,6 +26,23 @@ define Build/zyxel-factory
|
||||
fi
|
||||
endef
|
||||
|
||||
define Device/aerohive_hiveap-121
|
||||
ATH_SOC := ar9344
|
||||
DEVICE_VENDOR := Aerohive
|
||||
DEVICE_MODEL := HiveAP 121
|
||||
DEVICE_PACKAGES := kmod-usb2
|
||||
BLOCKSIZE := 128k
|
||||
PAGESIZE := 2048
|
||||
IMAGE_SIZE := 116m
|
||||
KERNEL_SIZE := 5120k
|
||||
UBINIZE_OPTS := -E 5
|
||||
SUPPORTED_DEVICES += hiveap-121
|
||||
IMAGES += factory.bin
|
||||
IMAGE/factory.bin := append-kernel | pad-to $$$$(KERNEL_SIZE) | append-ubi | check-size $$$$(IMAGE_SIZE)
|
||||
IMAGE/sysupgrade.bin := sysupgrade-tar | append-metadata
|
||||
endef
|
||||
TARGET_DEVICES += aerohive_hiveap-121
|
||||
|
||||
define Device/glinet_gl-ar300m-nand
|
||||
ATH_SOC := qca9531
|
||||
DEVICE_VENDOR := GL.iNet
|
||||
|
||||
@ -8,6 +8,9 @@ ath79_setup_interfaces()
|
||||
local board="$1"
|
||||
|
||||
case "$board" in
|
||||
aerohive,hiveap-121)
|
||||
ucidef_set_interface_lan "eth0"
|
||||
;;
|
||||
*)
|
||||
ucidef_set_interfaces_lan_wan "eth0" "eth1"
|
||||
;;
|
||||
|
||||
@ -13,6 +13,9 @@ platform_do_upgrade() {
|
||||
local board=$(board_name)
|
||||
|
||||
case "$board" in
|
||||
aerohive,hiveap-121)
|
||||
nand_do_upgrade "$1"
|
||||
;;
|
||||
*)
|
||||
default_do_upgrade "$1"
|
||||
;;
|
||||
|
||||
@ -1,3 +1,4 @@
|
||||
CONFIG_AT803X_PHY=y
|
||||
CONFIG_BCH=y
|
||||
CONFIG_MTD_NAND=y
|
||||
CONFIG_MTD_NAND_AR934X=y
|
||||
@ -8,8 +9,11 @@ CONFIG_MTD_SPINAND_MT29F=y
|
||||
CONFIG_MTD_SPINAND_ONDIEECC=y
|
||||
CONFIG_MTD_UBI=y
|
||||
CONFIG_MTD_UBI_BEB_LIMIT=20
|
||||
# CONFIG_MTD_UBI_BLOCK is not set
|
||||
CONFIG_MTD_UBI_BLOCK=y
|
||||
# CONFIG_MTD_UBI_FASTMAP is not set
|
||||
# CONFIG_MTD_UBI_GLUEBI is not set
|
||||
CONFIG_MTD_UBI_WL_THRESHOLD=4096
|
||||
# CONFIG_UBIFS_FS is not set
|
||||
CONFIG_UBIFS_FS=y
|
||||
CONFIG_UBIFS_FS_ADVANCED_COMPR=y
|
||||
CONFIG_UBIFS_FS_LZO=y
|
||||
CONFIG_UBIFS_FS_ZLIB=y
|
||||
|
||||
Loading…
x
Reference in New Issue
Block a user