bcm27xx: update patches from RPi foundation

bcm2708: boot tested on RPi B+ v1.2
bcm2709: boot tested on RPi 3B v1.2
bcm2710: boot tested on RPi 3B v1.2
bcm2711: boot tested on RPi 4B v1.1 4G

Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>

target/linux/bcm27xx/bcm2708/config-5.4

@@ -43,6 +43,7 @@ CONFIG_ARM_ERRATA_411920=y
 CONFIG_ARM_HAS_SG_CHAIN=y
 CONFIG_ARM_L1_CACHE_SHIFT=5
 CONFIG_ARM_PATCH_PHYS_VIRT=y
+# CONFIG_ARM_RASPBERRYPI_CPUFREQ is not set
 # CONFIG_ARM_SCMI_PROTOCOL is not set
 CONFIG_ARM_THUMB=y
 CONFIG_ARM_TIMER_SP804=y
@@ -79,7 +80,7 @@ CONFIG_CC_HAS_KASAN_GENERIC=y
 CONFIG_CLKDEV_LOOKUP=y
 CONFIG_CLKSRC_MMIO=y
 CONFIG_CLK_BCM2835=y
-# CONFIG_CLK_RASPBERRYPI is not set
+CONFIG_CLK_RASPBERRYPI=y
 CONFIG_CLONE_BACKWARDS=y
 CONFIG_CMA=y
 CONFIG_CMA_ALIGNMENT=8
@@ -136,6 +137,9 @@ CONFIG_DCACHE_WORD_ACCESS=y
 CONFIG_DEBUG_BUGVERBOSE=y
 CONFIG_DEBUG_INFO=y
 CONFIG_DEBUG_LL_INCLUDE="mach/debug-macro.S"
+CONFIG_DMABUF_HEAPS=y
+CONFIG_DMABUF_HEAPS_CMA=y
+CONFIG_DMABUF_HEAPS_SYSTEM=y
 CONFIG_DMADEVICES=y
 CONFIG_DMA_BCM2708=y
 CONFIG_DMA_BCM2835=y
@@ -249,6 +253,7 @@ CONFIG_HZ_FIXED=0
 CONFIG_I2C=y
 # CONFIG_I2C_BCM2708 is not set
 CONFIG_I2C_BOARDINFO=y
+# CONFIG_I2C_BRCMSTB is not set
 CONFIG_IKCONFIG=y
 CONFIG_IKCONFIG_PROC=y
 CONFIG_INPUT=y
@@ -342,6 +347,7 @@ CONFIG_REGMAP_MMIO=y
 CONFIG_REGULATOR=y
 CONFIG_REGULATOR_FIXED_VOLTAGE=y
 CONFIG_RESET_CONTROLLER=y
+CONFIG_RESET_SIMPLE=y
 # CONFIG_RPIVID_MEM is not set
 CONFIG_SCSI=y
 # CONFIG_SCSI_LOWLEVEL is not set

target/linux/bcm27xx/bcm2709/config-5.4

@@ -183,6 +183,9 @@ CONFIG_DEBUG_BUGVERBOSE=y
 CONFIG_DEBUG_INFO=y
 CONFIG_DEBUG_LL_INCLUDE="mach/debug-macro.S"
 CONFIG_DIMLIB=y
+CONFIG_DMABUF_HEAPS=y
+CONFIG_DMABUF_HEAPS_CMA=y
+CONFIG_DMABUF_HEAPS_SYSTEM=y
 CONFIG_DMADEVICES=y
 CONFIG_DMA_BCM2708=y
 CONFIG_DMA_BCM2835=y
@@ -317,6 +320,7 @@ CONFIG_HZ_FIXED=0
 CONFIG_I2C=y
 # CONFIG_I2C_BCM2708 is not set
 CONFIG_I2C_BOARDINFO=y
+# CONFIG_I2C_BRCMSTB is not set
 CONFIG_IKCONFIG=y
 CONFIG_IKCONFIG_PROC=y
 CONFIG_INPUT=y
@@ -441,6 +445,7 @@ CONFIG_REGULATOR=y
 CONFIG_REGULATOR_FIXED_VOLTAGE=y
 CONFIG_REGULATOR_GPIO=y
 CONFIG_RESET_CONTROLLER=y
+CONFIG_RESET_SIMPLE=y
 CONFIG_RFS_ACCEL=y
 # CONFIG_RPIVID_MEM is not set
 CONFIG_RPS=y

target/linux/bcm27xx/bcm2710/config-5.4

@@ -224,6 +224,9 @@ CONFIG_CRYPTO_XTS=y
 CONFIG_DCACHE_WORD_ACCESS=y
 CONFIG_DEBUG_BUGVERBOSE=y
 CONFIG_DEBUG_INFO=y
+CONFIG_DMABUF_HEAPS=y
+CONFIG_DMABUF_HEAPS_CMA=y
+CONFIG_DMABUF_HEAPS_SYSTEM=y
 CONFIG_DMADEVICES=y
 CONFIG_DMA_BCM2708=y
 CONFIG_DMA_BCM2835=y
@@ -232,6 +235,7 @@ CONFIG_DMA_DIRECT_REMAP=y
 CONFIG_DMA_ENGINE=y
 CONFIG_DMA_OF=y
 CONFIG_DMA_REMAP=y
+CONFIG_DMA_SHARED_BUFFER=y
 CONFIG_DMA_VIRTUAL_CHANNELS=y
 CONFIG_DNOTIFY=y
 CONFIG_DRM_RCAR_WRITEBACK=y
@@ -372,6 +376,7 @@ CONFIG_HZ_250=y
 CONFIG_I2C=y
 # CONFIG_I2C_BCM2708 is not set
 CONFIG_I2C_BOARDINFO=y
+# CONFIG_I2C_BRCMSTB is not set
 CONFIG_IKCONFIG=y
 CONFIG_IKCONFIG_PROC=y
 CONFIG_ILLEGAL_POINTER_VALUE=0xdead000000000000
@@ -513,6 +518,7 @@ CONFIG_REGULATOR=y
 CONFIG_REGULATOR_FIXED_VOLTAGE=y
 CONFIG_REGULATOR_GPIO=y
 CONFIG_RESET_CONTROLLER=y
+CONFIG_RESET_SIMPLE=y
 CONFIG_RFS_ACCEL=y
 CONFIG_RODATA_FULL_DEFAULT_ENABLED=y
 # CONFIG_RPIVID_MEM is not set

target/linux/bcm27xx/bcm2711/config-5.4

@@ -229,6 +229,9 @@ CONFIG_DCACHE_WORD_ACCESS=y
 CONFIG_DEBUG_BUGVERBOSE=y
 CONFIG_DEBUG_INFO=y
 CONFIG_DIMLIB=y
+CONFIG_DMABUF_HEAPS=y
+CONFIG_DMABUF_HEAPS_CMA=y
+CONFIG_DMABUF_HEAPS_SYSTEM=y
 CONFIG_DMADEVICES=y
 CONFIG_DMA_BCM2708=y
 CONFIG_DMA_BCM2835=y
@@ -237,6 +240,7 @@ CONFIG_DMA_DIRECT_REMAP=y
 CONFIG_DMA_ENGINE=y
 CONFIG_DMA_OF=y
 CONFIG_DMA_REMAP=y
+CONFIG_DMA_SHARED_BUFFER=y
 CONFIG_DMA_VIRTUAL_CHANNELS=y
 CONFIG_DNOTIFY=y
 CONFIG_DRM_RCAR_WRITEBACK=y
@@ -378,6 +382,7 @@ CONFIG_HZ_250=y
 CONFIG_I2C=y
 # CONFIG_I2C_BCM2708 is not set
 CONFIG_I2C_BOARDINFO=y
+# CONFIG_I2C_BRCMSTB is not set
 CONFIG_IKCONFIG=y
 CONFIG_IKCONFIG_PROC=y
 CONFIG_ILLEGAL_POINTER_VALUE=0xdead000000000000
@@ -523,6 +528,7 @@ CONFIG_REGULATOR=y
 CONFIG_REGULATOR_FIXED_VOLTAGE=y
 CONFIG_REGULATOR_GPIO=y
 CONFIG_RESET_CONTROLLER=y
+CONFIG_RESET_SIMPLE=y
 CONFIG_RFS_ACCEL=y
 CONFIG_RODATA_FULL_DEFAULT_ENABLED=y
 # CONFIG_RPIVID_MEM is not set

target/linux/bcm27xx/modules/sound.mk

@@ -268,6 +268,33 @@ endef
 $(eval $(call KernelPackage,sound-soc-allo-katana-codec))
 
 
+define KernelPackage/sound-soc-audioinjector-isolated-soundcard
+  TITLE:=Support for AudioInjector Isolated soundcard
+  KCONFIG:= \
+    CONFIG_SND_AUDIOINJECTOR_ISOLATED_SOUNDCARD \
+    CONFIG_SND_SOC_CS4271 \
+    CONFIG_SND_SOC_CS4271_I2C
+  FILES:= \
+    $(LINUX_DIR)/sound/soc/bcm/snd-soc-audioinjector-isolated-soundcard.ko \
+    $(LINUX_DIR)/sound/soc/codecs/snd-soc-wm8731.ko
+  AUTOLOAD:=$(call AutoLoad,68,snd-soc-cs4271.o \
+    snd-soc-cs4271-i2c \
+    snd-soc-audioinjector-isolated-soundcard)
+  DEPENDS:= \
+    kmod-sound-soc-bcm2835-i2s \
+    +kmod-i2c-bcm2835 \
+    +kmod-regmap-i2c \
+    +kmod-regmap-spi
+  $(call AddDepends/sound)
+endef
+
+define KernelPackage/sound-soc-audioinjector-isolated-soundcard/description
+  This package contains support for AudioInjector Isolated soundcard
+endef
+
+$(eval $(call KernelPackage,sound-soc-audioinjector-isolated-soundcard))
+
+
 define KernelPackage/sound-soc-audioinjector-octo-soundcard
   TITLE:=Support for AudioInjector Octo soundcard
   KCONFIG:= \
@@ -884,6 +911,28 @@ endef
 $(eval $(call KernelPackage,sound-soc-rpi-dac))
 
 
+define KernelPackage/sound-soc-merus-amp
+  TITLE:=Support for Infineon Merus Amp
+  KCONFIG:= \
+    CONFIG_SND_SOC_MA120X0P
+  FILES:= \
+    $(LINUX_DIR)/sound/soc/codecs/snd-soc-ma120x0p.ko
+  AUTOLOAD:=$(call AutoLoad,68,snd-soc-ma120x0p)
+  DEPENDS:= \
+    kmod-sound-soc-bcm2835-i2s \
+    +kmod-sound-soc-rpi-simple-soundcard \
+    +kmod-i2c-bcm2835 \
+    +kmod-regmap-i2c
+  $(call AddDepends/sound)
+endef
+
+define KernelPackage/sound-soc-merus-amp/description
+  This package contains support for Infineon Merus Amp
+endef
+
+$(eval $(call KernelPackage,sound-soc-merus-amp))
+
+
 define KernelPackage/sound-soc-rpi-proto
   TITLE:=Support for RPi-PROTO
   KCONFIG:= \

target/linux/bcm27xx/modules/video.mk

@@ -33,12 +33,13 @@ define KernelPackage/drm-vc4
     +kmod-sound-soc-core
   KCONFIG:= \
     CONFIG_DRM_VC4 \
-    CONFIG_DRM_VC4_HDMI_CEC=n \
+    CONFIG_DRM_VC4_HDMI_CEC=y \
     CONFIG_DRM_V3D=n \
     CONFIG_DRM_TVE200=n
   FILES:= \
     $(LINUX_DIR)/drivers/gpu/drm/vc4/vc4.ko \
-    $(LINUX_DIR)/drivers/gpu/drm/drm_kms_helper.ko
+    $(LINUX_DIR)/drivers/gpu/drm/drm_kms_helper.ko \
+    $(LINUX_DIR)/drivers/media/cec/cec.ko
   AUTOLOAD:=$(call AutoProbe,vc4)
 endef
 

target/linux/bcm27xx/patches-5.4/950-0351-v3d_drv-Allow-clock-retrieval-by-name.patch

@@ -1,23 +0,0 @@
-From a19956ff2941b73204c96127a22edef71b5d0d34 Mon Sep 17 00:00:00 2001
-From: popcornmix <popcornmix@gmail.com>
-Date: Mon, 9 Sep 2019 23:50:44 +0100
-Subject: [PATCH] v3d_drv: Allow clock retrieval by name
-
-Signed-off-by: Phil Elwell <phil@raspberrypi.org>
----
- drivers/gpu/drm/v3d/v3d_drv.c | 4 +++-
- 1 file changed, 3 insertions(+), 1 deletion(-)
-
---- a/drivers/gpu/drm/v3d/v3d_drv.c
-+++ b/drivers/gpu/drm/v3d/v3d_drv.c
-@@ -285,7 +285,9 @@ static int v3d_platform_drm_probe(struct
- 		}
- 	}
- 
--	v3d->clk = devm_clk_get(dev, NULL);
-+	v3d->clk = devm_clk_get(dev, "v3d");
-+	if (!v3d->clk)
-+		v3d->clk = devm_clk_get(dev, NULL);
- 	if (IS_ERR_OR_NULL(v3d->clk)) {
- 		if (PTR_ERR(v3d->clk) != -EPROBE_DEFER)
- 			dev_err(dev, "Failed to get clock (%ld)\n", PTR_ERR(v3d->clk));

target/linux/bcm27xx/patches-5.4/950-0354-clk-raspberrypi-Also-support-v3d-clock.patch

@@ -1,647 +0,0 @@
-From e2262c8ab4755ab574580611d7da22509f07871c Mon Sep 17 00:00:00 2001
-From: popcornmix <popcornmix@gmail.com>
-Date: Wed, 21 Aug 2019 14:55:56 +0100
-Subject: [PATCH] clk-raspberrypi: Also support v3d clock
-
-Signed-off-by: popcornmix <popcornmix@gmail.com>
----
- drivers/clk/bcm/clk-raspberrypi.c | 501 ++++++++++++++++++++++++------
- 1 file changed, 412 insertions(+), 89 deletions(-)
-
---- a/drivers/clk/bcm/clk-raspberrypi.c
-+++ b/drivers/clk/bcm/clk-raspberrypi.c
-@@ -15,33 +15,103 @@
- #include <linux/io.h>
- #include <linux/module.h>
- #include <linux/platform_device.h>
--
-+#include <dt-bindings/clock/bcm2835.h>
- #include <soc/bcm2835/raspberrypi-firmware.h>
- 
- #define RPI_FIRMWARE_ARM_CLK_ID		0x00000003
-+#define RPI_FIRMWARE_V3D_CLK_ID		0x00000005
- 
- #define RPI_FIRMWARE_STATE_ENABLE_BIT	BIT(0)
- #define RPI_FIRMWARE_STATE_WAIT_BIT	BIT(1)
- 
--/*
-- * Even though the firmware interface alters 'pllb' the frequencies are
-- * provided as per 'pllb_arm'. We need to scale before passing them trough.
-- */
--#define RPI_FIRMWARE_PLLB_ARM_DIV_RATE	2
--
- #define A2W_PLL_FRAC_BITS		20
- 
-+#define SOC_BCM2835		BIT(0)
-+#define SOC_BCM2711		BIT(1)
-+#define SOC_ALL			(SOC_BCM2835 | SOC_BCM2711)
-+
- struct raspberrypi_clk {
- 	struct device *dev;
- 	struct rpi_firmware *firmware;
- 	struct platform_device *cpufreq;
-+};
-+
-+typedef int (*raspberrypi_clk_register)(struct raspberrypi_clk *rpi,
-+					      const void *data);
-+
-+
-+/* assignment helper macros for different clock types */
-+#define _REGISTER(f, s, ...) { .clk_register = (raspberrypi_clk_register)f, \
-+			       .supported = s,				\
-+			       .data = __VA_ARGS__ }
-+#define REGISTER_PLL(s, ...)	_REGISTER(&raspberrypi_register_pll,	\
-+					  s,				\
-+					  &(struct raspberrypi_pll_data)	\
-+					  {__VA_ARGS__})
-+#define REGISTER_PLL_DIV(s, ...) _REGISTER(&raspberrypi_register_pll_divider, \
-+					   s,				  \
-+					   &(struct raspberrypi_pll_divider_data) \
-+					   {__VA_ARGS__})
-+#define REGISTER_CLK(s, ...)	_REGISTER(&raspberrypi_register_clock,	\
-+					  s,				\
-+					  &(struct raspberrypi_clock_data)	\
-+					  {__VA_ARGS__})
-+
-+
-+struct raspberrypi_pll_data {
-+	const char *name;
-+	const char *const *parents;
-+	int num_parents;
-+	u32 clock_id;
-+};
-+
-+struct raspberrypi_clock_data {
-+	const char *name;
-+	const char *const *parents;
-+	int num_parents;
-+	u32 flags;
-+	u32 clock_id;
-+};
-+
-+struct raspberrypi_pll_divider_data {
-+	const char *name;
-+	const char *divider_name;
-+	const char *lookup;
-+	const char *source_pll;
-+
-+	u32 fixed_divider;
-+	u32 flags;
-+	u32 clock_id;
-+};
- 
--	unsigned long min_rate;
--	unsigned long max_rate;
-+struct raspberrypi_clk_desc {
-+	raspberrypi_clk_register clk_register;
-+	unsigned int supported;
-+	const void *data;
-+};
- 
--	struct clk_hw pllb;
--	struct clk_hw *pllb_arm;
--	struct clk_lookup *pllb_arm_lookup;
-+struct raspberrypi_clock {
-+	struct clk_hw hw;
-+	struct raspberrypi_clk *rpi;
-+	u32 min_rate;
-+	u32 max_rate;
-+	const struct raspberrypi_clock_data *data;
-+};
-+
-+struct raspberrypi_pll {
-+	struct clk_hw hw;
-+	struct raspberrypi_clk *rpi;
-+	u32 min_rate;
-+	u32 max_rate;
-+	const struct raspberrypi_pll_data *data;
-+};
-+
-+struct raspberrypi_pll_divider {
-+	struct clk_divider div;
-+	struct raspberrypi_clk *rpi;
-+	u32 min_rate;
-+	u32 max_rate;
-+	const struct raspberrypi_pll_divider_data *data;
- };
- 
- /*
-@@ -83,56 +153,49 @@ static int raspberrypi_clock_property(st
- 	return 0;
- }
- 
--static int raspberrypi_fw_pll_is_on(struct clk_hw *hw)
-+static int raspberrypi_fw_is_on(struct raspberrypi_clk *rpi, u32 clock_id, const char *name)
- {
--	struct raspberrypi_clk *rpi = container_of(hw, struct raspberrypi_clk,
--						   pllb);
- 	u32 val = 0;
- 	int ret;
- 
- 	ret = raspberrypi_clock_property(rpi->firmware,
- 					 RPI_FIRMWARE_GET_CLOCK_STATE,
--					 RPI_FIRMWARE_ARM_CLK_ID, &val);
-+					 clock_id, &val);
- 	if (ret)
- 		return 0;
- 
- 	return !!(val & RPI_FIRMWARE_STATE_ENABLE_BIT);
- }
- 
--
--static unsigned long raspberrypi_fw_pll_get_rate(struct clk_hw *hw,
--						 unsigned long parent_rate)
-+static unsigned long raspberrypi_fw_get_rate(struct raspberrypi_clk *rpi,
-+						 u32 clock_id, const char *name, unsigned long parent_rate)
- {
--	struct raspberrypi_clk *rpi = container_of(hw, struct raspberrypi_clk,
--						   pllb);
- 	u32 val = 0;
- 	int ret;
- 
- 	ret = raspberrypi_clock_property(rpi->firmware,
- 					 RPI_FIRMWARE_GET_CLOCK_RATE,
--					 RPI_FIRMWARE_ARM_CLK_ID,
-+					 clock_id,
- 					 &val);
- 	if (ret)
--		return ret;
--
--	return val * RPI_FIRMWARE_PLLB_ARM_DIV_RATE;
-+		dev_err_ratelimited(rpi->dev, "Failed to get %s frequency: %d",
-+				    name, ret);
-+	return val;
- }
- 
--static int raspberrypi_fw_pll_set_rate(struct clk_hw *hw, unsigned long rate,
--				       unsigned long parent_rate)
-+static int raspberrypi_fw_set_rate(struct raspberrypi_clk *rpi,
-+				   u32 clock_id, const char *name, u32 rate,
-+				   unsigned long parent_rate)
- {
--	struct raspberrypi_clk *rpi = container_of(hw, struct raspberrypi_clk,
--						   pllb);
--	u32 new_rate = rate / RPI_FIRMWARE_PLLB_ARM_DIV_RATE;
- 	int ret;
- 
- 	ret = raspberrypi_clock_property(rpi->firmware,
- 					 RPI_FIRMWARE_SET_CLOCK_RATE,
--					 RPI_FIRMWARE_ARM_CLK_ID,
--					 &new_rate);
-+					 clock_id,
-+					 &rate);
- 	if (ret)
- 		dev_err_ratelimited(rpi->dev, "Failed to change %s frequency: %d",
--				    clk_hw_get_name(hw), ret);
-+				    name, ret);
- 
- 	return ret;
- }
-@@ -141,16 +204,18 @@ static int raspberrypi_fw_pll_set_rate(s
-  * Sadly there is no firmware rate rounding interface. We borrowed it from
-  * clk-bcm2835.
-  */
--static int raspberrypi_pll_determine_rate(struct clk_hw *hw,
-+static int raspberrypi_determine_rate(struct raspberrypi_clk *rpi,
-+					  u32 clock_id, const char *name, unsigned long min_rate, unsigned long max_rate,
- 					  struct clk_rate_request *req)
- {
--	struct raspberrypi_clk *rpi = container_of(hw, struct raspberrypi_clk,
--						   pllb);
-+#if 1
-+	req->rate = clamp(req->rate, min_rate, max_rate);
-+#else
- 	u64 div, final_rate;
- 	u32 ndiv, fdiv;
- 
- 	/* We can't use req->rate directly as it would overflow */
--	final_rate = clamp(req->rate, rpi->min_rate, rpi->max_rate);
-+	final_rate = clamp(req->rate, min_rate, max_rate);
- 
- 	div = (u64)final_rate << A2W_PLL_FRAC_BITS;
- 	do_div(div, req->best_parent_rate);
-@@ -163,9 +228,129 @@ static int raspberrypi_pll_determine_rat
- 
- 	req->rate = final_rate >> A2W_PLL_FRAC_BITS;
- 
-+#endif
- 	return 0;
- }
- 
-+static int raspberrypi_fw_clock_is_on(struct clk_hw *hw)
-+{
-+	struct raspberrypi_clock *pll = container_of(hw, struct raspberrypi_clock, hw);
-+	struct raspberrypi_clk *rpi = pll->rpi;
-+	const struct raspberrypi_clock_data *data = pll->data;
-+
-+	return raspberrypi_fw_is_on(rpi, data->clock_id, data->name);
-+}
-+
-+static unsigned long raspberrypi_fw_clock_get_rate(struct clk_hw *hw,
-+						 unsigned long parent_rate)
-+{
-+	struct raspberrypi_clock *pll = container_of(hw, struct raspberrypi_clock, hw);
-+	struct raspberrypi_clk *rpi = pll->rpi;
-+	const struct raspberrypi_clock_data *data = pll->data;
-+
-+	return raspberrypi_fw_get_rate(rpi, data->clock_id, data->name, parent_rate);
-+}
-+
-+static int raspberrypi_fw_clock_set_rate(struct clk_hw *hw, unsigned long rate,
-+				       unsigned long parent_rate)
-+{
-+	struct raspberrypi_clock *pll = container_of(hw, struct raspberrypi_clock, hw);
-+	struct raspberrypi_clk *rpi = pll->rpi;
-+	const struct raspberrypi_clock_data *data = pll->data;
-+
-+	return raspberrypi_fw_set_rate(rpi, data->clock_id, data->name, rate, parent_rate);
-+}
-+
-+static int raspberrypi_clock_determine_rate(struct clk_hw *hw,
-+					  struct clk_rate_request *req)
-+{
-+	struct raspberrypi_clock *pll = container_of(hw, struct raspberrypi_clock, hw);
-+	struct raspberrypi_clk *rpi = pll->rpi;
-+	const struct raspberrypi_clock_data *data = pll->data;
-+
-+	return raspberrypi_determine_rate(rpi, data->clock_id, data->name, pll->min_rate, pll->max_rate, req);
-+}
-+
-+static int raspberrypi_fw_pll_is_on(struct clk_hw *hw)
-+{
-+	struct raspberrypi_pll *pll = container_of(hw, struct raspberrypi_pll, hw);
-+	struct raspberrypi_clk *rpi = pll->rpi;
-+	const struct raspberrypi_pll_data *data = pll->data;
-+
-+	return raspberrypi_fw_is_on(rpi, data->clock_id, data->name);
-+}
-+
-+static unsigned long raspberrypi_fw_pll_get_rate(struct clk_hw *hw,
-+						 unsigned long parent_rate)
-+{
-+	struct raspberrypi_pll *pll = container_of(hw, struct raspberrypi_pll, hw);
-+	struct raspberrypi_clk *rpi = pll->rpi;
-+	const struct raspberrypi_pll_data *data = pll->data;
-+
-+	return raspberrypi_fw_get_rate(rpi, data->clock_id, data->name, parent_rate);
-+}
-+
-+static int raspberrypi_fw_pll_set_rate(struct clk_hw *hw, unsigned long rate,
-+				       unsigned long parent_rate)
-+{
-+	struct raspberrypi_pll *pll = container_of(hw, struct raspberrypi_pll, hw);
-+	struct raspberrypi_clk *rpi = pll->rpi;
-+	const struct raspberrypi_pll_data *data = pll->data;
-+
-+	return raspberrypi_fw_set_rate(rpi, data->clock_id, data->name, rate, parent_rate);
-+}
-+
-+static int raspberrypi_pll_determine_rate(struct clk_hw *hw,
-+					  struct clk_rate_request *req)
-+{
-+	struct raspberrypi_pll *pll = container_of(hw, struct raspberrypi_pll, hw);
-+	struct raspberrypi_clk *rpi = pll->rpi;
-+	const struct raspberrypi_pll_data *data = pll->data;
-+
-+	return raspberrypi_determine_rate(rpi, data->clock_id, data->name, pll->min_rate, pll->max_rate, req);
-+}
-+
-+
-+static int raspberrypi_fw_pll_div_is_on(struct clk_hw *hw)
-+{
-+	struct raspberrypi_pll_divider *pll = container_of(hw, struct raspberrypi_pll_divider, div.hw);
-+	struct raspberrypi_clk *rpi = pll->rpi;
-+	const struct raspberrypi_pll_divider_data *data = pll->data;
-+
-+	return raspberrypi_fw_is_on(rpi, data->clock_id, data->name);
-+}
-+
-+static unsigned long raspberrypi_fw_pll_div_get_rate(struct clk_hw *hw,
-+						 unsigned long parent_rate)
-+{
-+	struct raspberrypi_pll_divider *pll = container_of(hw, struct raspberrypi_pll_divider, div.hw);
-+	struct raspberrypi_clk *rpi = pll->rpi;
-+	const struct raspberrypi_pll_divider_data *data = pll->data;
-+
-+	return raspberrypi_fw_get_rate(rpi, data->clock_id, data->name, parent_rate);
-+}
-+
-+static int raspberrypi_fw_pll_div_set_rate(struct clk_hw *hw, unsigned long rate,
-+				       unsigned long parent_rate)
-+{
-+	struct raspberrypi_pll_divider *pll = container_of(hw, struct raspberrypi_pll_divider, div.hw);
-+	struct raspberrypi_clk *rpi = pll->rpi;
-+	const struct raspberrypi_pll_divider_data *data = pll->data;
-+
-+	return raspberrypi_fw_set_rate(rpi, data->clock_id, data->name, rate, parent_rate);
-+}
-+
-+static int raspberrypi_pll_div_determine_rate(struct clk_hw *hw,
-+					  struct clk_rate_request *req)
-+{
-+	struct raspberrypi_pll_divider *pll = container_of(hw, struct raspberrypi_pll_divider, div.hw);
-+	struct raspberrypi_clk *rpi = pll->rpi;
-+	const struct raspberrypi_pll_divider_data *data = pll->data;
-+
-+	return raspberrypi_determine_rate(rpi, data->clock_id, data->name, pll->min_rate, pll->max_rate, req);
-+}
-+
-+
- static const struct clk_ops raspberrypi_firmware_pll_clk_ops = {
- 	.is_prepared = raspberrypi_fw_pll_is_on,
- 	.recalc_rate = raspberrypi_fw_pll_get_rate,
-@@ -173,87 +358,225 @@ static const struct clk_ops raspberrypi_
- 	.determine_rate = raspberrypi_pll_determine_rate,
- };
- 
--static int raspberrypi_register_pllb(struct raspberrypi_clk *rpi)
-+static const struct clk_ops raspberrypi_firmware_pll_divider_clk_ops = {
-+	.is_prepared = raspberrypi_fw_pll_div_is_on,
-+	.recalc_rate = raspberrypi_fw_pll_div_get_rate,
-+	.set_rate = raspberrypi_fw_pll_div_set_rate,
-+	.determine_rate = raspberrypi_pll_div_determine_rate,
-+};
-+
-+static const struct clk_ops raspberrypi_firmware_clk_ops = {
-+	.is_prepared = raspberrypi_fw_clock_is_on,
-+	.recalc_rate = raspberrypi_fw_clock_get_rate,
-+	.set_rate = raspberrypi_fw_clock_set_rate,
-+	.determine_rate = raspberrypi_clock_determine_rate,
-+};
-+
-+
-+static int raspberrypi_get_clock_range(struct raspberrypi_clk *rpi, u32 clock_id, u32 *min_rate, u32 *max_rate)
- {
--	u32 min_rate = 0, max_rate = 0;
-+	int ret;
-+
-+	/* Get min & max rates set by the firmware */
-+	ret = raspberrypi_clock_property(rpi->firmware,
-+					 RPI_FIRMWARE_GET_MIN_CLOCK_RATE,
-+					 clock_id,
-+					 min_rate);
-+	if (ret) {
-+		dev_err(rpi->dev, "Failed to get clock %d min freq: %d (%d)\n",
-+			clock_id, *min_rate, ret);
-+		return ret;
-+	}
-+
-+	ret = raspberrypi_clock_property(rpi->firmware,
-+					 RPI_FIRMWARE_GET_MAX_CLOCK_RATE,
-+					 clock_id,
-+					 max_rate);
-+	if (ret) {
-+		dev_err(rpi->dev, "Failed to get clock %d max freq: %d (%d)\n",
-+			clock_id, *max_rate, ret);
-+		return ret;
-+	}
-+	return 0;
-+}
-+
-+
-+static int raspberrypi_register_pll(struct raspberrypi_clk *rpi,
-+					   const struct raspberrypi_pll_data *data)
-+{
-+	struct raspberrypi_pll *pll;
- 	struct clk_init_data init;
- 	int ret;
- 
- 	memset(&init, 0, sizeof(init));
- 
- 	/* All of the PLLs derive from the external oscillator. */
--	init.parent_names = (const char *[]){ "osc" };
--	init.num_parents = 1;
--	init.name = "pllb";
-+	init.parent_names = data->parents;
-+	init.num_parents = data->num_parents;
-+	init.name = data->name;
- 	init.ops = &raspberrypi_firmware_pll_clk_ops;
- 	init.flags = CLK_GET_RATE_NOCACHE | CLK_IGNORE_UNUSED;
- 
--	/* Get min & max rates set by the firmware */
--	ret = raspberrypi_clock_property(rpi->firmware,
--					 RPI_FIRMWARE_GET_MIN_CLOCK_RATE,
--					 RPI_FIRMWARE_ARM_CLK_ID,
--					 &min_rate);
-+	pll = kzalloc(sizeof(*pll), GFP_KERNEL);
-+	if (!pll)
-+		return -ENOMEM;
-+	pll->rpi = rpi;
-+	pll->data = data;
-+	pll->hw.init = &init;
-+
-+	ret = raspberrypi_get_clock_range(rpi, data->clock_id, &pll->min_rate, &pll->max_rate);
- 	if (ret) {
--		dev_err(rpi->dev, "Failed to get %s min freq: %d\n",
--			init.name, ret);
-+		dev_err(rpi->dev, "%s: raspberrypi_get_clock_range(%s) failed: %d\n", __func__, init.name, ret);
- 		return ret;
- 	}
- 
--	ret = raspberrypi_clock_property(rpi->firmware,
--					 RPI_FIRMWARE_GET_MAX_CLOCK_RATE,
--					 RPI_FIRMWARE_ARM_CLK_ID,
--					 &max_rate);
-+	ret = devm_clk_hw_register(rpi->dev, &pll->hw);
- 	if (ret) {
--		dev_err(rpi->dev, "Failed to get %s max freq: %d\n",
--			init.name, ret);
-+		dev_err(rpi->dev, "%s: devm_clk_hw_register(%s) failed: %d\n", __func__, init.name, ret);
- 		return ret;
- 	}
-+	return 0;
-+}
- 
--	if (!min_rate || !max_rate) {
--		dev_err(rpi->dev, "Unexpected frequency range: min %u, max %u\n",
--			min_rate, max_rate);
--		return -EINVAL;
--	}
-+static int
-+raspberrypi_register_pll_divider(struct raspberrypi_clk *rpi,
-+			     const struct raspberrypi_pll_divider_data *data)
-+{
-+	struct raspberrypi_pll_divider *divider;
-+	struct clk_init_data init;
-+	int ret;
-+
-+	memset(&init, 0, sizeof(init));
-+
-+	init.parent_names = &data->source_pll;
-+	init.num_parents = 1;
-+	init.name = data->name;
-+	init.ops = &raspberrypi_firmware_pll_divider_clk_ops;
-+	init.flags = data->flags | CLK_IGNORE_UNUSED;
- 
--	dev_info(rpi->dev, "CPU frequency range: min %u, max %u\n",
--		 min_rate, max_rate);
-+	divider = devm_kzalloc(rpi->dev, sizeof(*divider), GFP_KERNEL);
-+	if (!divider)
-+		return -ENOMEM;
-+
-+	divider->div.hw.init = &init;
-+	divider->rpi = rpi;
-+	divider->data = data;
-+
-+	ret = raspberrypi_get_clock_range(rpi, data->clock_id, &divider->min_rate, &divider->max_rate);
-+	if (ret) {
-+		dev_err(rpi->dev, "%s: raspberrypi_get_clock_range(%s) failed: %d\n", __func__, init.name, ret);
-+		return ret;
-+	}
- 
--	rpi->min_rate = min_rate * RPI_FIRMWARE_PLLB_ARM_DIV_RATE;
--	rpi->max_rate = max_rate * RPI_FIRMWARE_PLLB_ARM_DIV_RATE;
-+	ret = devm_clk_hw_register(rpi->dev, &divider->div.hw);
-+	if (ret) {
-+		dev_err(rpi->dev, "%s: devm_clk_hw_register(%s) failed: %d\n", __func__, init.name, ret);
-+		return ret;
-+	}
- 
--	rpi->pllb.init = &init;
-+	/*
-+	 * PLLH's channels have a fixed divide by 10 afterwards, which
-+	 * is what our consumers are actually using.
-+	 */
-+	if (data->fixed_divider != 0) {
-+		struct clk_lookup *lookup;
-+		struct clk_hw *clk = clk_hw_register_fixed_factor(rpi->dev,
-+						    data->divider_name,
-+						    data->name,
-+						    CLK_SET_RATE_PARENT,
-+						    1,
-+						    data->fixed_divider);
-+		if (IS_ERR(clk)) {
-+			dev_err(rpi->dev, "%s: clk_hw_register_fixed_factor(%s) failed: %ld\n", __func__, init.name, PTR_ERR(clk));
-+			return PTR_ERR(clk);
-+		}
-+		if (data->lookup) {
-+			lookup = clkdev_hw_create(clk, NULL, data->lookup);
-+			if (IS_ERR(lookup)) {
-+				dev_err(rpi->dev, "%s: clk_hw_register_fixed_factor(%s) failed: %ld\n", __func__, init.name, PTR_ERR(lookup));
-+				return PTR_ERR(lookup);
-+			}
-+		}
-+	}
- 
--	return devm_clk_hw_register(rpi->dev, &rpi->pllb);
-+	return 0;
- }
- 
--static int raspberrypi_register_pllb_arm(struct raspberrypi_clk *rpi)
-+static int raspberrypi_register_clock(struct raspberrypi_clk *rpi,
-+					  const struct raspberrypi_clock_data *data)
- {
--	rpi->pllb_arm = clk_hw_register_fixed_factor(rpi->dev,
--				"pllb_arm", "pllb",
--				CLK_SET_RATE_PARENT | CLK_GET_RATE_NOCACHE,
--				1, 2);
--	if (IS_ERR(rpi->pllb_arm)) {
--		dev_err(rpi->dev, "Failed to initialize pllb_arm\n");
--		return PTR_ERR(rpi->pllb_arm);
--	}
-+	struct raspberrypi_clock *clock;
-+	struct clk_init_data init;
-+	struct clk *clk;
-+	int ret;
-+
-+	memset(&init, 0, sizeof(init));
-+	init.parent_names = data->parents;
-+	init.num_parents = data->num_parents;
-+	init.name = data->name;
-+	init.flags = data->flags | CLK_IGNORE_UNUSED;
- 
--	rpi->pllb_arm_lookup = clkdev_hw_create(rpi->pllb_arm, NULL, "cpu0");
--	if (!rpi->pllb_arm_lookup) {
--		dev_err(rpi->dev, "Failed to initialize pllb_arm_lookup\n");
--		clk_hw_unregister_fixed_factor(rpi->pllb_arm);
-+	init.ops = &raspberrypi_firmware_clk_ops;
-+
-+	clock = devm_kzalloc(rpi->dev, sizeof(*clock), GFP_KERNEL);
-+	if (!clock)
- 		return -ENOMEM;
--	}
- 
-+	clock->rpi = rpi;
-+	clock->data = data;
-+	clock->hw.init = &init;
-+
-+	ret = raspberrypi_get_clock_range(rpi, data->clock_id, &clock->min_rate, &clock->max_rate);
-+	if (ret) {
-+		dev_err(rpi->dev, "%s: raspberrypi_get_clock_range(%s) failed: %d\n", __func__, init.name, ret);
-+		return ret;
-+	}
-+	clk = devm_clk_register(rpi->dev, &clock->hw);
-+	if (IS_ERR(clk)) {
-+		dev_err(rpi->dev, "%s: devm_clk_register(%s) failed: %ld\n", __func__, init.name, PTR_ERR(clk));
-+		return PTR_ERR(clk);
-+	}
-+	ret = clk_register_clkdev(clk, init.name, NULL);
-+	if (ret) {
-+		dev_err(rpi->dev, "%s: clk_register_clkdev(%s) failed: %d\n", __func__, init.name, ret);
-+		return ret;
-+	}
- 	return 0;
- }
- 
-+
-+/*
-+ * the real definition of all the pll, pll_dividers and clocks
-+ * these make use of the above REGISTER_* macros
-+ */
-+static const struct raspberrypi_clk_desc clk_desc_array[] = {
-+	/* the PLL + PLL dividers */
-+	[BCM2835_CLOCK_V3D]     = REGISTER_CLK(
-+		SOC_ALL,
-+		.name = "v3d",
-+		.parents = (const char *[]){ "osc" },
-+		.num_parents = 1,
-+		.clock_id = RPI_FIRMWARE_V3D_CLK_ID),
-+	[BCM2835_PLLB_ARM]      = REGISTER_PLL_DIV(
-+		SOC_ALL,
-+		.name = "pllb",
-+		.source_pll = "osc",
-+		.divider_name = "pllb_arm",
-+		.lookup = "cpu0",
-+		.fixed_divider = 1,
-+		.clock_id = RPI_FIRMWARE_ARM_CLK_ID,
-+		.flags = CLK_SET_RATE_PARENT),
-+};
-+
- static int raspberrypi_clk_probe(struct platform_device *pdev)
- {
- 	struct device_node *firmware_node;
- 	struct device *dev = &pdev->dev;
- 	struct rpi_firmware *firmware;
- 	struct raspberrypi_clk *rpi;
--	int ret;
-+	const struct raspberrypi_clk_desc *desc;
-+	const size_t asize = ARRAY_SIZE(clk_desc_array);
-+	int i;
- 
- 	firmware_node = of_find_compatible_node(NULL, NULL,
- 					"raspberrypi,bcm2835-firmware");
-@@ -275,16 +598,16 @@ static int raspberrypi_clk_probe(struct
- 	rpi->firmware = firmware;
- 	platform_set_drvdata(pdev, rpi);
- 
--	ret = raspberrypi_register_pllb(rpi);
--	if (ret) {
--		dev_err(dev, "Failed to initialize pllb, %d\n", ret);
--		return ret;
-+	for (i = 0; i < asize; i++) {
-+		desc = &clk_desc_array[i];
-+		if (desc->clk_register && desc->data /*&&
-+		    (desc->supported & pdata->soc)*/) {
-+			int ret = desc->clk_register(rpi, desc->data);
-+			if (ret)
-+				return ret;
-+		}
- 	}
- 
--	ret = raspberrypi_register_pllb_arm(rpi);
--	if (ret)
--		return ret;
--
- 	rpi->cpufreq = platform_device_register_data(dev, "raspberrypi-cpufreq",
- 						     -1, NULL, 0);
-