Merge Official Source

2025-01-09 02:43:53 +08:00 · 2020-04-27 10:29:16 +08:00 · 2020-04-27 10:29:16 +08:00 · 515108c600
commit 515108c600
parent 2fb0a167d3 3fdb08681b
39 changed files with 1071 additions and 282 deletions
--- a/include/kernel-version.mk
+++ b/include/kernel-version.mk
@ -8,11 +8,11 @@ endif

 LINUX_VERSION-4.14 = .176
 LINUX_VERSION-4.19 = .115
-LINUX_VERSION-5.4 = .34
+LINUX_VERSION-5.4 = .35

 LINUX_KERNEL_HASH-4.14.176 = bcae0956baaeb55dab5bad0401873fbc5baaa7fbe957ea6d27a5ab241cec5ca2
 LINUX_KERNEL_HASH-4.19.115 = 11b2d97c8ea5ceb40c5e1d0bb87ad5b2b8c84560181bc60c0d28ec3a3e3801c2
-LINUX_KERNEL_HASH-5.4.34 = 903ec1334daba6a626688f799cc947b420cf6fc8ce83055313dc4e9978d64cd2
+LINUX_KERNEL_HASH-5.4.35 = e16bd5f7284a80a41328bf712e1136b0adf5b71cc0bd263efa7cac75539806d4

 remove_uri_prefix=$(subst git://,,$(subst http://,,$(subst https://,,$(1))))
 sanitize_uri=$(call qstrip,$(subst @,_,$(subst :,_,$(subst .,_,$(subst -,_,$(subst /,_,$(1)))))))
--- a/include/u-boot.mk
+++ b/include/u-boot.mk
@ -3,7 +3,8 @@ PKG_NAME ?= u-boot
 ifndef PKG_SOURCE_PROTO
 PKG_SOURCE = $(PKG_NAME)-$(PKG_VERSION).tar.bz2
 PKG_SOURCE_URL = \
-	https://sources.openwrt.org \
+	https://mirror.cyberbits.eu/u-boot \
+	https://ftp.denx.de/pub/u-boot \
 	ftp://ftp.denx.de/pub/u-boot
 endif

--- a/package/boot/uboot-envtools/Makefile
+++ b/package/boot/uboot-envtools/Makefile
@ -9,16 +9,17 @@ include $(TOPDIR)/rules.mk

 PKG_NAME:=uboot-envtools
 PKG_DISTNAME:=u-boot
-PKG_VERSION:=2019.07
-PKG_RELEASE:=3
+PKG_VERSION:=2020.04
+PKG_RELEASE:=1

-PKG_SOURCE_PROTO:=git
-PKG_SOURCE:=$(PKG_DISTNAME)-$(PKG_VERSION).tar.xz
+PKG_SOURCE:=$(PKG_DISTNAME)-$(PKG_VERSION).tar.bz2
+PKG_SOURCE_URL:= \
+    https://ftp.denx.de/pub/u-boot \
+    https://mirror.cyberbits.eu/u-boot \
+    ftp://ftp.denx.de/pub/u-boot
+PKG_HASH:=fe732aaf037d9cc3c0909bad8362af366ae964bbdac6913a34081ff4ad565372
 PKG_SOURCE_SUBDIR:=$(PKG_DISTNAME)-$(PKG_VERSION)
 PKG_BUILD_DIR:=$(BUILD_DIR)/$(PKG_DISTNAME)-$(PKG_VERSION)
-PKG_SOURCE_URL:=https://git.denx.de/u-boot.git
-PKG_SOURCE_VERSION:=e5aee22e4be75e75a854ab64503fc80598bc2004
-PKG_MIRROR_HASH:=58c1ecaf901b6bf65c5e872b5449b642694ae5acebf61f91f0d4bc20b4c654b7

 PKG_BUILD_DEPENDS:=fstools

--- a/package/boot/uboot-envtools/files/ath79
+++ b/package/boot/uboot-envtools/files/ath79
@ -16,7 +16,6 @@ case "$board" in
 alfa-network,ap121f|\
 buffalo,bhr-4grv2|\
 devolo,magic-2-wifi|\
-domywifi,dw33d|\
 engenius,ecb1750|\
 etactica,eg200|\
 glinet,gl-ar300m-lite|\
@ -46,6 +45,9 @@ yuncore,xd4200)
 buffalo,wzr-hp-ag300h)
 	ubootenv_add_uci_config "/dev/mtd3" "0x0" "0x10000" "0x10000"
 	;;
+domywifi,dw33d)
+	ubootenv_add_uci_config "/dev/mtd4" "0x0" "0x10000" "0x10000"
+	;;
 glinet,gl-ar150)
 	ubootenv_add_uci_config "/dev/mtd1" "0x0" "0x8000" "0x10000"
 	;;
--- a/package/boot/uboot-envtools/files/mvebu
+++ b/package/boot/uboot-envtools/files/mvebu
@ -17,6 +17,9 @@ case "$board" in
 cznic,turris-omnia)
 	ubootenv_add_uci_config "/dev/mtd0" "0xC0000" "0x10000" "0x40000"
 	;;
+glinet,gl-mv1000)
+	ubootenv_add_uci_config "/dev/mtd1" "0x0" "0x8000" "0x8000" "1"
+	;;
 globalscale,espressobin|\
 globalscale,espressobin-emmc|\
 globalscale,espressobin-v7|\
--- a/package/devel/gdb/Makefile
+++ b/package/devel/gdb/Makefile
@ -44,6 +44,7 @@ endef
 define Package/gdbserver
 $(call Package/gdb/Default)
  TITLE:=Remote server for GNU Debugger
+  DEPENDS=@!arc
 endef

 define Package/gdbserver/description
--- a/package/devel/perf/Makefile
+++ b/package/devel/perf/Makefile
@ -48,6 +48,7 @@ MAKE_FLAGS = \
 	NO_LIBAUDIT=1 \
 	NO_LIBCRYPTO=1 \
 	NO_LIBUNWIND=1 \
+	NO_LIBCAP=1 \
 	CROSS_COMPILE="$(TARGET_CROSS)" \
 	CC="$(TARGET_CC)" \
 	LD="$(TARGET_CROSS)ld" \
--- a/package/kernel/linux/modules/netdevices.mk
+++ b/package/kernel/linux/modules/netdevices.mk
@ -107,6 +107,22 @@ endef

 $(eval $(call KernelPackage,libphy))

+
+define KernelPackage/phylink
+  SUBMENU:=$(NETWORK_DEVICES_MENU)
+  TITLE:=Model for MAC to optional PHY connection
+  KCONFIG:=CONFIG_PHYLINK
+  FILES:=$(LINUX_DIR)/drivers/net/phy/phylink.ko
+  AUTOLOAD:=$(call AutoLoad,15,phylink,1)
+endef
+
+define KernelPackage/phylink/description
+ Model for MAC to optional PHY connection
+endef
+
+$(eval $(call KernelPackage,phylink))
+
+
 define KernelPackage/mii
  SUBMENU:=$(NETWORK_DEVICES_MENU)
  TITLE:=MII library
@ -733,6 +749,48 @@ endef
 $(eval $(call KernelPackage,i40evf))


+define KernelPackage/i40e
+  SUBMENU:=$(NETWORK_DEVICES_MENU)
+  TITLE:=Intel(R) Ethernet Controller XL710 Family support
+  DEPENDS:=@PCI_SUPPORT +kmod-mdio +kmod-ptp +kmod-hwmon-core +LINUX_5_4:kmod-libphy
+  KCONFIG:=CONFIG_I40E \
+    CONFIG_I40E_VXLAN=n \
+    CONFIG_I40E_HWMON=y \
+    CONFIG_I40E_DCA=n
+  FILES:=$(LINUX_DIR)/drivers/net/ethernet/intel/i40e/i40e.ko
+  AUTOLOAD:=$(call AutoProbe,i40e)
+endef
+
+define KernelPackage/i40e/description
+ Kernel modules for Intel(R) Ethernet Controller XL710 Family 40 Gigabit Ethernet adapters.
+endef
+
+$(eval $(call KernelPackage,i40e))
+
+
+define KernelPackage/iavf
+  SUBMENU:=$(NETWORK_DEVICES_MENU)
+  TITLE:=Intel(R) Ethernet Adaptive Virtual Function support
+  DEPENDS:=@PCI_SUPPORT
+  KCONFIG:= \
+       CONFIG_I40EVF \
+       CONFIG_IAVF
+  FILES:= \
+       $(LINUX_DIR)/drivers/net/ethernet/intel/i40evf/i40evf.ko@lt4.20 \
+       $(LINUX_DIR)/drivers/net/ethernet/intel/iavf/iavf.ko@ge4.20
+  AUTOLOAD:=$(call AutoProbe,i40evf iavf)
+  AUTOLOAD:=$(call AutoProbe,iavf)
+endef
+
+define KernelPackage/iavf/description
+ Kernel modules for Intel XL710,
+	  X710, X722, XXV710, and all devices advertising support for
+	  Intel Ethernet Adaptive Virtual Function devices.
+endef
+
+$(eval $(call KernelPackage,iavf))
+
+
 define KernelPackage/b44
  TITLE:=Broadcom 44xx driver
  KCONFIG:=CONFIG_B44
@ -1195,3 +1253,23 @@ define KernelPackage/mlx5-core/description
 endef

 $(eval $(call KernelPackage,mlx5-core))
+
+
+define KernelPackage/sfp
+  SUBMENU:=$(NETWORK_DEVICES_MENU)
+  TITLE:=SFP cage support
+  DEPENDS:=+kmod-i2c-core +kmod-hwmon-core +kmod-phylink
+  KCONFIG:= \
+	CONFIG_SFP \
+	CONFIG_MDIO_I2C
+  FILES:= \
+	$(LINUX_DIR)/drivers/net/phy/sfp.ko \
+	$(LINUX_DIR)/drivers/net/phy/mdio-i2c.ko
+  AUTOLOAD:=$(call AutoProbe,mdio-i2c sfp)
+endef
+
+define KernelPackage/sfp/description
+ Kernel module to support SFP cages
+endef
+
+$(eval $(call KernelPackage,sfp))
--- a/package/kernel/mac80211/patches/ath/922-ath10k-increase-rx-buffer-size-to-2048.patch
+++ b/package/kernel/mac80211/patches/ath/922-ath10k-increase-rx-buffer-size-to-2048.patch
@ -0,0 +1,37 @@
+From: Linus Lüssing <ll@simonwunderlich.de>
+Date: Wed, 5 Feb 2020 20:10:43 +0100
+Subject: ath10k: increase rx buffer size to 2048
+
+Before, only frames with a maximum size of 1528 bytes could be
+transmitted between two 802.11s nodes.
+
+For batman-adv for instance, which adds its own header to each frame,
+we typically need an MTU of at least 1532 bytes to be able to transmit
+without fragmentation.
+
+This patch now increases the maxmimum frame size from 1528 to 1656
+bytes.
+
+Tested with two ath10k devices in 802.11s mode, as well as with
+batman-adv on top of 802.11s with forwarding disabled.
+
+Fix originally found and developed by Ben Greear.
+
+Link: https://github.com/greearb/ath10k-ct/issues/89
+Link: https://github.com/greearb/ath10k-ct/commit/9e5ab25027e0971fa24ccf93373324c08c4e992d
+Cc: Ben Greear <greearb@candelatech.com>
+Signed-off-by: Linus Lüssing <ll@simonwunderlich.de>
+
+Forwarded: https://patchwork.kernel.org/patch/11367055/
+
+--- a/drivers/net/wireless/ath/ath10k/htt.h
+++ b/drivers/net/wireless/ath/ath10k/htt.h
+@@ -2219,7 +2219,7 @@ struct htt_rx_chan_info {
+  * Should be: sizeof(struct htt_host_rx_desc) + max rx MSDU size,
+  * rounded up to a cache line size.
+  */
+-#define HTT_RX_BUF_SIZE 1920
+#define HTT_RX_BUF_SIZE 2048
+ #define HTT_RX_MSDU_SIZE (HTT_RX_BUF_SIZE - (int)sizeof(struct htt_rx_desc))
+ 
+ /* Refill a bunch of RX buffers for each refill round so that FW/HW can handle
--- a/package/kernel/mac80211/patches/subsys/353-mac80211-use-more-bits-for-ack_frame_id.patch
+++ b/package/kernel/mac80211/patches/subsys/353-mac80211-use-more-bits-for-ack_frame_id.patch
@ -59,7 +59,7 @@ Acked-by: Toke Høiland-Jørgensen <toke@redhat.com>
 	if (id < 0) {
 --- a/net/mac80211/tx.c
 +++ b/net/mac80211/tx.c
-@@ -2452,7 +2452,7 @@ static int ieee80211_store_ack_skb(struc
+@@ -2458,7 +2458,7 @@ static int ieee80211_store_ack_skb(struc
 
 		spin_lock_irqsave(&local->ack_status_lock, flags);
 		id = idr_alloc(&local->ack_status_frames, ack_skb,
--- a/package/network/services/relayd/Makefile
+++ b/package/network/services/relayd/Makefile
@ -12,9 +12,9 @@ PKG_RELEASE:=1

 PKG_SOURCE_URL=$(PROJECT_GIT)/project/relayd.git
 PKG_SOURCE_PROTO:=git
-PKG_SOURCE_DATE:=2020-04-20
-PKG_SOURCE_VERSION:=ad0b25ad74345d367c62311e14b279f5ccb8ef13
-PKG_MIRROR_HASH:=e3e3598e5d37ea225db153288726036c5164bfc98e46d76ad8c317cc19b25a22
+PKG_SOURCE_DATE:=2020-04-25
+PKG_SOURCE_VERSION:=f4d759be54ceb37714e9a6ca320d5b50c95e9ce9
+PKG_MIRROR_HASH:=b1ff6e99072867be0975ba0be52ba9da3a876c8b8da893d68301e8238243a51e

 PKG_MAINTAINER:=Felix Fietkau <nbd@nbd.name>
 PKG_LICENSE:=GPL-2.0
--- a/package/network/services/umdns/Makefile
+++ b/package/network/services/umdns/Makefile
@ -12,9 +12,9 @@ PKG_RELEASE:=1

 PKG_SOURCE_URL=$(PROJECT_GIT)/project/mdnsd.git
 PKG_SOURCE_PROTO:=git
-PKG_SOURCE_DATE:=2020-04-20
-PKG_SOURCE_VERSION:=e74a3f9883199e9db7220d52b78e5fbdb4441ca3
-PKG_MIRROR_HASH:=a54410a6407c3dad985c94e3ca6f9c2bb5786876c9545cf65a56e4dfc2b380ff
+PKG_SOURCE_DATE:=2020-04-25
+PKG_SOURCE_VERSION:=cdac0460ba50dc45735f0be2e19a5a8efc3dafe1
+PKG_MIRROR_HASH:=261cb929dfc03c1f293156cfdec8c2cd1541dcdc57ae42a323f9df5d26e6f7d2

 PKG_MAINTAINER:=John Crispin <john@phrozen.org>
 PKG_LICENSE:=LGPL-2.1
--- a/package/system/procd/Makefile
+++ b/package/system/procd/Makefile
@ -12,9 +12,9 @@ PKG_RELEASE:=1

 PKG_SOURCE_PROTO:=git
 PKG_SOURCE_URL=$(PROJECT_GIT)/project/procd.git
-PKG_SOURCE_DATE:=2020-04-19
-PKG_SOURCE_VERSION:=d200b70e5d5b0b3b61e2573f1c2fa22b3fa9d63a
-PKG_MIRROR_HASH:=f56a7d8d74a9996fb83b6815446979550b7786019c97343fa5591d78e2b9c528
+PKG_SOURCE_DATE:=2020-04-25
+PKG_SOURCE_VERSION:=17e7ae769a4739e4b41a93f588d52cfd216b8eb2
+PKG_MIRROR_HASH:=6763cb63a53222d44be3b1ef238f3b9198d31fd533534abbbdc02202d3ef88e0
 CMAKE_INSTALL:=1

 PKG_LICENSE:=GPL-2.0
--- a/target/linux/bcm27xx/patches-5.4/950-0281-drm-vc4-A-present-but-empty-dmas-disables-audio.patch
+++ b/target/linux/bcm27xx/patches-5.4/950-0281-drm-vc4-A-present-but-empty-dmas-disables-audio.patch
@ -16,7 +16,7 @@ Signed-off-by: Phil Elwell <phil@raspberrypi.org>

 --- a/drivers/gpu/drm/vc4/vc4_hdmi.c
 +++ b/drivers/gpu/drm/vc4/vc4_hdmi.c
-@@ -1054,10 +1054,12 @@ static int vc4_hdmi_audio_init(struct vc
+@@ -1066,10 +1066,12 @@ static int vc4_hdmi_audio_init(struct vc
 	struct device *dev = &hdmi->pdev->dev;
 	const __be32 *addr;
 	int ret;
--- a/target/linux/bcm53xx/config-5.4
+++ b/target/linux/bcm53xx/config-5.4
@ -307,10 +307,8 @@ CONFIG_MODULES_USE_ELF_REL=y
 CONFIG_MTD_BCM47XXSFLASH=y
 CONFIG_MTD_BCM47XX_PARTS=y
 # CONFIG_MTD_HYPERBUS is not set
-CONFIG_MTD_NAND=y
 CONFIG_MTD_NAND_BRCMNAND=y
 CONFIG_MTD_NAND_CORE=y
-CONFIG_MTD_NAND_ECC=y
 CONFIG_MTD_NAND_ECC_SW_HAMMING=y
 CONFIG_MTD_PARSER_TRX=y
 CONFIG_MTD_RAW_NAND=y
--- a/target/linux/generic/backport-4.14/050-v4.19-f2fs-skip-verifying-block-address-non-regular-inode.patch
+++ b/target/linux/generic/backport-4.14/050-v4.19-f2fs-skip-verifying-block-address-non-regular-inode.patch
@ -0,0 +1,69 @@
+From dda9f4b9cac6bdd2a96253b4444d7a6ce5132edb Mon Sep 17 00:00:00 2001
+From: Chao Yu <yuchao0@huawei.com>
+Date: Sat, 11 Aug 2018 23:42:09 +0800
+Subject: f2fs: fix to skip verifying block address for non-regular inode
+
+generic/184 1s ... [failed, exit status 1]- output mismatch
+    --- tests/generic/184.out	2015-01-11 16:52:27.643681072 +0800
+     QA output created by 184 - silence is golden
+    +rm: cannot remove '/mnt/f2fs/null': Bad address
+    +mknod: '/mnt/f2fs/null': Bad address
+    +chmod: cannot access '/mnt/f2fs/null': Bad address
+    +./tests/generic/184: line 36: /mnt/f2fs/null: Bad address
+    ...
+
+F2FS-fs (zram0): access invalid blkaddr:259
+EIP: f2fs_is_valid_blkaddr+0x14b/0x1b0 [f2fs]
+ f2fs_iget+0x927/0x1010 [f2fs]
+ f2fs_lookup+0x26e/0x630 [f2fs]
+ __lookup_slow+0xb3/0x140
+ lookup_slow+0x31/0x50
+ walk_component+0x185/0x1f0
+ path_lookupat+0x51/0x190
+ filename_lookup+0x7f/0x140
+ user_path_at_empty+0x36/0x40
+ vfs_statx+0x61/0xc0
+ __do_sys_stat64+0x29/0x40
+ sys_stat64+0x13/0x20
+ do_fast_syscall_32+0xaa/0x22c
+ entry_SYSENTER_32+0x53/0x86
+
+In f2fs_iget(), we will check inode's first block address, if it is valid,
+we will set FI_FIRST_BLOCK_WRITTEN flag in inode.
+
+But we should only do this for regular inode, otherwise, like special
+inode, i_addr[0] is used for storing device info instead of block address,
+it will fail checking flow obviously.
+
+So for non-regular inode, let's skip verifying address and setting flag.
+
+Signed-off-by: Chao Yu <yuchao0@huawei.com>
+Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
+---
+ fs/f2fs/inode.c | 14 ++++++++------
+ 1 file changed, 8 insertions(+), 6 deletions(-)
+
+--- a/fs/f2fs/inode.c
+++ b/fs/f2fs/inode.c
+@@ -310,13 +310,15 @@ static int do_read_inode(struct inode *i
+ 	/* get rdev by using inline_info */
+ 	__get_inode_rdev(inode, ri);
+ 
+-	err = __written_first_block(sbi, ri);
+-	if (err < 0) {
+-		f2fs_put_page(node_page, 1);
+-		return err;
+	if (S_ISREG(inode->i_mode)) {
+		err = __written_first_block(sbi, ri);
+		if (err < 0) {
+			f2fs_put_page(node_page, 1);
+			return err;
+		}
+		if (!err)
+			set_inode_flag(inode, FI_FIRST_BLOCK_WRITTEN);
+ 	}
+-	if (!err)
+-		set_inode_flag(inode, FI_FIRST_BLOCK_WRITTEN);
+ 
+ 	if (!need_inode_block_update(sbi, inode->i_ino))
+ 		fi->last_disk_size = inode->i_size;
--- a/target/linux/generic/backport-5.4/750-v5.5-net-phy-add-support-for-clause-37-auto-negotiation.patch
+++ b/target/linux/generic/backport-5.4/750-v5.5-net-phy-add-support-for-clause-37-auto-negotiation.patch
@ -0,0 +1,199 @@
+From fa6e98cee558622565c97924e922b97340aeabd8 Mon Sep 17 00:00:00 2001
+From: Heiner Kallweit <hkallweit1@gmail.com>
+Date: Tue, 22 Oct 2019 11:31:07 -0700
+Subject: [PATCH] net: phy: add support for clause 37 auto-negotiation
+MIME-Version: 1.0
+Content-Type: text/plain; charset=UTF-8
+Content-Transfer-Encoding: 8bit
+
+This patch adds support for clause 37 1000Base-X auto-negotiation.
+
+Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
+Signed-off-by: Tao Ren <taoren@fb.com>
+Tested-by: René van Dorst <opensource@vdorst.com>
+Reviewed-by: Andrew Lunn <andrew@lunn.ch>
+Signed-off-by: David S. Miller <davem@davemloft.net>
+---
+ drivers/net/phy/phy_device.c | 139 +++++++++++++++++++++++++++++++++++
+ include/linux/phy.h          |   4 +
+ 2 files changed, 143 insertions(+)
+
+diff --git a/drivers/net/phy/phy_device.c b/drivers/net/phy/phy_device.c
+index f1f60bd4865a..fa71998fea51 100644
+--- a/drivers/net/phy/phy_device.c
+++ b/drivers/net/phy/phy_device.c
+@@ -1607,6 +1607,40 @@ static int genphy_config_advert(struct phy_device *phydev)
+ 	return changed;
+ }
+ 
+/**
+ * genphy_c37_config_advert - sanitize and advertise auto-negotiation parameters
+ * @phydev: target phy_device struct
+ *
+ * Description: Writes MII_ADVERTISE with the appropriate values,
+ *   after sanitizing the values to make sure we only advertise
+ *   what is supported.  Returns < 0 on error, 0 if the PHY's advertisement
+ *   hasn't changed, and > 0 if it has changed. This function is intended
+ *   for Clause 37 1000Base-X mode.
+ */
+static int genphy_c37_config_advert(struct phy_device *phydev)
+{
+	u16 adv = 0;
+
+	/* Only allow advertising what this PHY supports */
+	linkmode_and(phydev->advertising, phydev->advertising,
+		     phydev->supported);
+
+	if (linkmode_test_bit(ETHTOOL_LINK_MODE_1000baseX_Full_BIT,
+			      phydev->advertising))
+		adv |= ADVERTISE_1000XFULL;
+	if (linkmode_test_bit(ETHTOOL_LINK_MODE_Pause_BIT,
+			      phydev->advertising))
+		adv |= ADVERTISE_1000XPAUSE;
+	if (linkmode_test_bit(ETHTOOL_LINK_MODE_Asym_Pause_BIT,
+			      phydev->advertising))
+		adv |= ADVERTISE_1000XPSE_ASYM;
+
+	return phy_modify_changed(phydev, MII_ADVERTISE,
+				  ADVERTISE_1000XFULL | ADVERTISE_1000XPAUSE |
+				  ADVERTISE_1000XHALF | ADVERTISE_1000XPSE_ASYM,
+				  adv);
+}
+
+ /**
+  * genphy_config_eee_advert - disable unwanted eee mode advertisement
+  * @phydev: target phy_device struct
+@@ -1715,6 +1749,54 @@ int __genphy_config_aneg(struct phy_device *phydev, bool changed)
+ }
+ EXPORT_SYMBOL(__genphy_config_aneg);
+ 
+/**
+ * genphy_c37_config_aneg - restart auto-negotiation or write BMCR
+ * @phydev: target phy_device struct
+ *
+ * Description: If auto-negotiation is enabled, we configure the
+ *   advertising, and then restart auto-negotiation.  If it is not
+ *   enabled, then we write the BMCR. This function is intended
+ *   for use with Clause 37 1000Base-X mode.
+ */
+int genphy_c37_config_aneg(struct phy_device *phydev)
+{
+	int err, changed;
+
+	if (phydev->autoneg != AUTONEG_ENABLE)
+		return genphy_setup_forced(phydev);
+
+	err = phy_modify(phydev, MII_BMCR, BMCR_SPEED1000 | BMCR_SPEED100,
+			 BMCR_SPEED1000);
+	if (err)
+		return err;
+
+	changed = genphy_c37_config_advert(phydev);
+	if (changed < 0) /* error */
+		return changed;
+
+	if (!changed) {
+		/* Advertisement hasn't changed, but maybe aneg was never on to
+		 * begin with?  Or maybe phy was isolated?
+		 */
+		int ctl = phy_read(phydev, MII_BMCR);
+
+		if (ctl < 0)
+			return ctl;
+
+		if (!(ctl & BMCR_ANENABLE) || (ctl & BMCR_ISOLATE))
+			changed = 1; /* do restart aneg */
+	}
+
+	/* Only restart aneg if we are advertising something different
+	 * than we were before.
+	 */
+	if (changed > 0)
+		return genphy_restart_aneg(phydev);
+
+	return 0;
+}
+EXPORT_SYMBOL(genphy_c37_config_aneg);
+
+ /**
+  * genphy_aneg_done - return auto-negotiation status
+  * @phydev: target phy_device struct
+@@ -1886,6 +1968,63 @@ int genphy_read_status(struct phy_device *phydev)
+ }
+ EXPORT_SYMBOL(genphy_read_status);
+ 
+/**
+ * genphy_c37_read_status - check the link status and update current link state
+ * @phydev: target phy_device struct
+ *
+ * Description: Check the link, then figure out the current state
+ *   by comparing what we advertise with what the link partner
+ *   advertises. This function is for Clause 37 1000Base-X mode.
+ */
+int genphy_c37_read_status(struct phy_device *phydev)
+{
+	int lpa, err, old_link = phydev->link;
+
+	/* Update the link, but return if there was an error */
+	err = genphy_update_link(phydev);
+	if (err)
+		return err;
+
+	/* why bother the PHY if nothing can have changed */
+	if (phydev->autoneg == AUTONEG_ENABLE && old_link && phydev->link)
+		return 0;
+
+	phydev->duplex = DUPLEX_UNKNOWN;
+	phydev->pause = 0;
+	phydev->asym_pause = 0;
+
+	if (phydev->autoneg == AUTONEG_ENABLE && phydev->autoneg_complete) {
+		lpa = phy_read(phydev, MII_LPA);
+		if (lpa < 0)
+			return lpa;
+
+		linkmode_mod_bit(ETHTOOL_LINK_MODE_Autoneg_BIT,
+				 phydev->lp_advertising, lpa & LPA_LPACK);
+		linkmode_mod_bit(ETHTOOL_LINK_MODE_1000baseX_Full_BIT,
+				 phydev->lp_advertising, lpa & LPA_1000XFULL);
+		linkmode_mod_bit(ETHTOOL_LINK_MODE_Pause_BIT,
+				 phydev->lp_advertising, lpa & LPA_1000XPAUSE);
+		linkmode_mod_bit(ETHTOOL_LINK_MODE_Asym_Pause_BIT,
+				 phydev->lp_advertising,
+				 lpa & LPA_1000XPAUSE_ASYM);
+
+		phy_resolve_aneg_linkmode(phydev);
+	} else if (phydev->autoneg == AUTONEG_DISABLE) {
+		int bmcr = phy_read(phydev, MII_BMCR);
+
+		if (bmcr < 0)
+			return bmcr;
+
+		if (bmcr & BMCR_FULLDPLX)
+			phydev->duplex = DUPLEX_FULL;
+		else
+			phydev->duplex = DUPLEX_HALF;
+	}
+
+	return 0;
+}
+EXPORT_SYMBOL(genphy_c37_read_status);
+
+ /**
+  * genphy_soft_reset - software reset the PHY via BMCR_RESET bit
+  * @phydev: target phy_device struct
+diff --git a/include/linux/phy.h b/include/linux/phy.h
+index 9a0e981df502..78436d58ce7c 100644
+--- a/include/linux/phy.h
+++ b/include/linux/phy.h
+@@ -1106,6 +1106,10 @@ int genphy_read_mmd_unsupported(struct phy_device *phdev, int devad,
+ int genphy_write_mmd_unsupported(struct phy_device *phdev, int devnum,
+ 				 u16 regnum, u16 val);
+ 
+/* Clause 37 */
+int genphy_c37_config_aneg(struct phy_device *phydev);
+int genphy_c37_read_status(struct phy_device *phydev);
+
+ /* Clause 45 PHY */
+ int genphy_c45_restart_aneg(struct phy_device *phydev);
+ int genphy_c45_check_and_restart_aneg(struct phy_device *phydev, bool restart);
--- a/target/linux/imx6/config-5.4
+++ b/target/linux/imx6/config-5.4
@ -202,6 +202,7 @@ CONFIG_FIXED_PHY=y
 CONFIG_FIX_EARLYCON_MEM=y
 CONFIG_FSL_GUTS=y
 CONFIG_FS_ENCRYPTION=y
+# CONFIG_FSL_IMX8_DDR_PMU is not set
 CONFIG_FS_IOMAP=y
 CONFIG_FS_MBCACHE=y
 CONFIG_FS_POSIX_ACL=y
--- a/target/linux/mvebu/cortexa53/base-files/etc/board.d/02_network
+++ b/target/linux/mvebu/cortexa53/base-files/etc/board.d/02_network
@ -11,6 +11,7 @@ board_config_update
 board=$(board_name)

 case "$board" in
+glinet,gl-mv1000|\
 globalscale,espressobin|\
 globalscale,espressobin-emmc|\
 globalscale,espressobin-v7|\
--- a/target/linux/mvebu/files-4.19/arch/arm64/boot/dts/marvell/armada-3720-gl-mv1000.dts
+++ b/target/linux/mvebu/files-4.19/arch/arm64/boot/dts/marvell/armada-3720-gl-mv1000.dts
@ -0,0 +1,162 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+
+/dts-v1/;
+#include <dt-bindings/gpio/gpio.h>
+#include "armada-372x.dtsi"
+
+/ {
+	model = "GL.iNet GL-MV1000";
+	compatible = "glinet,gl-mv1000", "marvell,armada3720";
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	memory@0 {
+		device_type = "memory";
+		reg = <0x00000000 0x00000000 0x00000000 0x20000000>;
+	};
+
+	vcc_sd_reg1: regulator {
+		compatible = "regulator-gpio";
+		regulator-name = "vcc_sd1";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-boot-on;
+        
+		gpios-states = <0>;
+		states = <1800000 0x1
+			3300000 0x0>;
+		enable-active-high;
+	};
+};
+
+&spi0 {
+	status = "okay";
+
+	flash@0 {
+		reg = <0>;
+		compatible = "jedec,spi-nor";
+		spi-max-frequency = <104000000>;
+		m25p,fast-read;
+		partitions {
+			compatible = "fixed-partitions";
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			partition@0 {
+				label = "u-boot";
+				reg = <0 0xf0000>;
+			};
+
+			partition@f0000 {
+				label = "u-boot-env";
+				reg = <0Xf0000 0x8000>;
+			};
+
+			factory: partition@f8000 {
+				label = "factory";
+				reg = <0xf8000 0x8000>;
+			};
+		};
+	};
+};
+
+&sdhci1 {
+	wp-inverted;
+	bus-width = <4>;
+	cd-gpios = <&gpionb 17 GPIO_ACTIVE_LOW>;
+	marvell,pad-type = "sd";
+	no-1-8-v;
+	vqmmc-supply = <&vcc_sd_reg1>;
+	status = "okay";
+};
+
+&sdhci0 {
+	bus-width = <8>;
+	mmc-ddr-1_8v;
+	mmc-hs400-1_8v;
+	non-removable;
+	no-sd;
+	no-sdio;
+	marvell,pad-type = "fixed-1-8v";
+	status = "okay";
+};
+
+&usb3 {
+	status = "okay";
+};
+
+&usb2 {
+	status = "okay";
+};
+
+&uart0 {
+	status = "okay";
+};
+
+&mdio {
+	switch0: switch0@1 {
+		compatible = "marvell,mv88e6085";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		reg = <1>;
+
+		dsa,member = <0 0>;
+
+		ports: ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port@0 {
+				reg = <0>;
+				label = "cpu";
+				ethernet = <&eth0>;
+			};
+
+			port@1 {
+				reg = <1>;
+				label = "wan";
+				phy-handle = <&switch0phy0>;
+			};
+
+			port@2 {
+				reg = <2>;
+				label = "lan0";
+				phy-handle = <&switch0phy1>;
+			};
+
+			port@3 {
+				reg = <3>;
+				label = "lan1";
+				phy-handle = <&switch0phy2>;
+			};
+		};
+
+		mdio {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			switch0phy0: switch0phy0@11 {
+				reg = <0x11>;
+			};
+			switch0phy1: switch0phy1@12 {
+				reg = <0x12>;
+			};
+			switch0phy2: switch0phy2@13 {
+				reg = <0x13>;
+			};
+		};
+	};
+};
+
+&eth0 {
+	mtd-mac-address = <&factory 0x0>;
+	phy-mode = "rgmii-id";
+	status = "okay";
+
+	fixed-link {
+		speed = <1000>;
+		full-duplex;
+	};
+};
--- a/target/linux/mvebu/files-5.4/arch/arm64/boot/dts/marvell/armada-3720-gl-mv1000.dts
+++ b/target/linux/mvebu/files-5.4/arch/arm64/boot/dts/marvell/armada-3720-gl-mv1000.dts
@ -0,0 +1,162 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+
+/dts-v1/;
+#include <dt-bindings/gpio/gpio.h>
+#include "armada-372x.dtsi"
+
+/ {
+	model = "GL.iNet GL-MV1000";
+	compatible = "glinet,gl-mv1000", "marvell,armada3720";
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	memory@0 {
+		device_type = "memory";
+		reg = <0x00000000 0x00000000 0x00000000 0x20000000>;
+	};
+
+	vcc_sd_reg1: regulator {
+		compatible = "regulator-gpio";
+		regulator-name = "vcc_sd1";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-boot-on;
+        
+		gpios-states = <0>;
+		states = <1800000 0x1
+			3300000 0x0>;
+		enable-active-high;
+	};
+};
+
+&spi0 {
+	status = "okay";
+
+	flash@0 {
+		reg = <0>;
+		compatible = "jedec,spi-nor";
+		spi-max-frequency = <104000000>;
+		m25p,fast-read;
+		partitions {
+			compatible = "fixed-partitions";
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			partition@0 {
+				label = "u-boot";
+				reg = <0 0xf0000>;
+			};
+
+			partition@f0000 {
+				label = "u-boot-env";
+				reg = <0Xf0000 0x8000>;
+			};
+
+			factory: partition@f8000 {
+				label = "factory";
+				reg = <0xf8000 0x8000>;
+			};
+		};
+	};
+};
+
+&sdhci1 {
+	wp-inverted;
+	bus-width = <4>;
+	cd-gpios = <&gpionb 17 GPIO_ACTIVE_LOW>;
+	marvell,pad-type = "sd";
+	no-1-8-v;
+	vqmmc-supply = <&vcc_sd_reg1>;
+	status = "okay";
+};
+
+&sdhci0 {
+	bus-width = <8>;
+	mmc-ddr-1_8v;
+	mmc-hs400-1_8v;
+	non-removable;
+	no-sd;
+	no-sdio;
+	marvell,pad-type = "fixed-1-8v";
+	status = "okay";
+};
+
+&usb3 {
+	status = "okay";
+};
+
+&usb2 {
+	status = "okay";
+};
+
+&uart0 {
+	status = "okay";
+};
+
+&mdio {
+	switch0: switch0@1 {
+		compatible = "marvell,mv88e6085";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		reg = <1>;
+
+		dsa,member = <0 0>;
+
+		ports: ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port@0 {
+				reg = <0>;
+				label = "cpu";
+				ethernet = <&eth0>;
+			};
+
+			port@1 {
+				reg = <1>;
+				label = "wan";
+				phy-handle = <&switch0phy0>;
+			};
+
+			port@2 {
+				reg = <2>;
+				label = "lan0";
+				phy-handle = <&switch0phy1>;
+			};
+
+			port@3 {
+				reg = <3>;
+				label = "lan1";
+				phy-handle = <&switch0phy2>;
+			};
+		};
+
+		mdio {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			switch0phy0: switch0phy0@11 {
+				reg = <0x11>;
+			};
+			switch0phy1: switch0phy1@12 {
+				reg = <0x12>;
+			};
+			switch0phy2: switch0phy2@13 {
+				reg = <0x13>;
+			};
+		};
+	};
+};
+
+&eth0 {
+	mtd-mac-address = <&factory 0x0>;
+	phy-mode = "rgmii-id";
+	status = "okay";
+
+	fixed-link {
+		speed = <1000>;
+		full-duplex;
+	};
+};
--- a/target/linux/mvebu/image/cortexa53.mk
+++ b/target/linux/mvebu/image/cortexa53.mk
@ -1,3 +1,11 @@
+define Device/glinet_gl-mv1000
+  $(call Device/Default-arm64)
+  DEVICE_VENDOR := GL.iNet
+  DEVICE_MODEL := GL-MV1000
+  SOC := armada-3720
+endef
+TARGET_DEVICES += glinet_gl-mv1000
+
 define Device/globalscale_espressobin
  $(call Device/Default-arm64)
  DEVICE_VENDOR := Marvell
--- a/target/linux/oxnas/base-files/etc/init.d/set-irq-affinity
+++ b/target/linux/oxnas/base-files/etc/init.d/set-irq-affinity
--- a/target/linux/ramips/dts/mt7621_ubnt_edgerouter-x-sfp.dts
+++ b/target/linux/ramips/dts/mt7621_ubnt_edgerouter-x-sfp.dts
@ -5,13 +5,71 @@
 / {
 	model = "Ubiquiti EdgeRouter X SFP";
 	compatible = "ubnt,edgerouter-x-sfp", "mediatek,mt7621-soc";
+
+	sfp_eth5: sfp_eth5 {
+		compatible = "sff,sfp";
+		i2c-bus = <&i2c>;
+		mod-def0-gpio = <&expander0 5 GPIO_ACTIVE_LOW>;
+		maximum-power-milliwatt = <1000>;
+	};
 };

 &i2c {
 	status = "okay";

-	pca9555@25 {
+	/*
+	 * PCA9655 GPIO expander
+	 *  0-POE power port eth0
+	 *  1-POE power port eth1
+	 *  2-POE power port eth2
+	 *  3-POE power port eth3
+	 *  4-POE power port eth4
+	 *  5-SFP_MOD_DEF0#
+	 *  6-
+	 *  7-
+	 *  8-Pull up to VCC
+	 *  9-Pull down to GND
+	 * 10-Pull down to GND
+	 * 11-Pull down to GND
+	 * 12-Pull down to GND
+	 * 13-Pull down to GND
+	 * 14-Pull down to GND
+	 * 15-Pull down to GND
+	 */
+	expander0: pca9555@25 {
 		compatible = "nxp,pca9555";
+		interrupt-parent = <&gpio>;
+		interrupts = <8 IRQ_TYPE_EDGE_FALLING>;
+		gpio-controller;
+		#gpio-cells = <2>;
 		reg = <0x25>;
 	};
 };
+
+&gpio {
+	sfp_i2c_clk_gate {
+		gpio-hog;
+		gpios = <7 GPIO_ACTIVE_LOW>;
+		output-high;
+	};
+};
+
+&mdio {
+	ephy7: ethernet-phy@7 {
+		reg = <7>;
+		sfp = <&sfp_eth5>;
+	};
+};
+
+&switch0 {
+	ports {
+		port@5 {
+			reg = <5>;
+			label = "eth5";
+			phy-handle = <&ephy7>;
+			phy-mode = "rgmii-rxid";
+			mtd-mac-address = <&factory 0x22>;
+			mtd-mac-address-increment = <5>;
+		};
+	};
+};
--- a/target/linux/ramips/image/mt7621.mk
+++ b/target/linux/ramips/image/mt7621.mk
@ -818,7 +818,7 @@ TARGET_DEVICES += ubnt_edgerouter-x
 define Device/ubnt_edgerouter-x-sfp
  $(Device/ubnt_edgerouter_common)
  DEVICE_MODEL := EdgeRouter X SFP
-  DEVICE_PACKAGES += kmod-i2c-algo-pca kmod-gpio-pca953x
+  DEVICE_PACKAGES += kmod-i2c-algo-pca kmod-gpio-pca953x kmod-sfp
  SUPPORTED_DEVICES += ubnt-erx-sfp ubiquiti,edgerouterx-sfp
 endef
 TARGET_DEVICES += ubnt_edgerouter-x-sfp
--- a/target/linux/ramips/image/mt76x8.mk
+++ b/target/linux/ramips/image/mt76x8.mk
@ -161,7 +161,6 @@ define Device/mercury_mac1200r-v2
  DEVICE_VENDOR := Mercury
  DEVICE_MODEL := MAC1200R
  DEVICE_VARIANT := v2.0
-  SUPPORTED_DEVICES := mac1200rv2
  DEVICE_PACKAGES := kmod-mt76x2
  SUPPORTED_DEVICES += mac1200rv2
 endef
--- a/target/linux/ramips/image/rt305x.mk
+++ b/target/linux/ramips/image/rt305x.mk
@ -298,7 +298,6 @@ define Device/belkin_f7c027
  IMAGE_SIZE := 7616k
  DEVICE_VENDOR := Belkin
  DEVICE_MODEL := F7C027
-  DEVICE_PACKAGES := --kmod-usb-dwc2 -kmod-usb-ledtrig-usbport
  SUPPORTED_DEVICES += f7c027
 endef
 TARGET_DEVICES += belkin_f7c027
--- a/target/linux/ramips/mt7621/base-files/etc/board.d/02_network
+++ b/target/linux/ramips/mt7621/base-files/etc/board.d/02_network
@ -42,10 +42,12 @@ ramips_setup_interfaces()
 	mikrotik,routerboard-750gr3)
 		ucidef_set_interfaces_lan_wan "lan2 lan3 lan4 lan5" "wan"
 		;;
-	ubnt,edgerouter-x|\
-	ubnt,edgerouter-x-sfp)
+	ubnt,edgerouter-x)
 		ucidef_set_interface_lan "eth0 eth1 eth2 eth3 eth4"
 		;;
+	ubnt,edgerouter-x-sfp)
+		ucidef_set_interface_lan "eth0 eth1 eth2 eth3 eth4 eth5"
+		;;
 	*)
 		ucidef_set_interfaces_lan_wan "lan1 lan2 lan3 lan4" "wan"
 		;;
--- a/target/linux/ramips/mt7621/config-5.4
+++ b/target/linux/ramips/mt7621/config-5.4
@ -19,6 +19,7 @@ CONFIG_ARCH_USE_QUEUED_RWLOCKS=y
 CONFIG_ARCH_USE_QUEUED_SPINLOCKS=y
 CONFIG_ARCH_WANT_DEFAULT_TOPDOWN_MMAP_LAYOUT=y
 CONFIG_ARCH_WANT_IPC_PARSE_VERSION=y
+CONFIG_AT803X_PHY=y
 CONFIG_BLK_MQ_PCI=y
 CONFIG_BOARD_SCACHE=y
 CONFIG_BOUNCE=y
--- a/target/linux/ramips/patches-5.4/991-at803x.patch
+++ b/target/linux/ramips/patches-5.4/991-at803x.patch
@ -0,0 +1,141 @@
+From 60ae82b0ea56c279be384b99cd2a42ae5ba7c5c7 Mon Sep 17 00:00:00 2001
+From: =?UTF-8?q?Ren=C3=A9=20van=20Dorst?= <opensource@vdorst.com>
+Date: Mon, 4 Nov 2019 22:22:17 +0100
+Subject: [PATCH] net: phy: at803x: add support for SFP module in
+ RGMII-to-x-base mode
+MIME-Version: 1.0
+Content-Type: text/plain; charset=UTF-8
+Content-Transfer-Encoding: 8bit
+
+Signed-off-by: René van Dorst <opensource@vdorst.com>
+---
+ drivers/net/phy/at803x.c | 74 ++++++++++++++++++++++++++++++++++++++++
+ 1 file changed, 74 insertions(+)
+
+diff --git a/drivers/net/phy/at803x.c b/drivers/net/phy/at803x.c
+index 481cf48c9b9e4..a6536ecf15db4 100644
+--- a/drivers/net/phy/at803x.c
+++ b/drivers/net/phy/at803x.c
+@@ -19,6 +19,7 @@
+ #include <linux/etherdevice.h>
+ #include <linux/of_gpio.h>
+ #include <linux/gpio/consumer.h>
+#include <linux/sfp.h>
+ 
+ #define AT803X_SPECIFIC_STATUS			0x11
+ #define AT803X_SS_SPEED_MASK			(3 << 14)
+@@ -57,9 +58,18 @@
+ 
+ #define AT803X_MODE_CFG_MASK			0x0F
+ #define AT803X_MODE_CFG_SGMII			0x01
+#define AT803X_MODE_CFG_BX1000_RGMII_50		0x02
+#define AT803X_MODE_CFG_BX1000_RGMII_75		0x03
+#define AT803X_MODE_FIBER			0x01
+#define AT803X_MODE_COPPER			0x00
+ 
+ #define AT803X_PSSR			0x11	/*PHY-Specific Status Register*/
+ #define AT803X_PSSR_MR_AN_COMPLETE	0x0200
+#define	 PSSR_LINK			BIT(10)
+#define	 PSSR_SYNC_STATUS		BIT(8)
+#define	 PSSR_DUPLEX			BIT(13)
+#define	 PSSR_SPEED_1000		BIT(15)
+#define	 PSSR_SPEED_100			BIT(14)
+ 
+ #define AT803X_DEBUG_REG_0			0x00
+ #define AT803X_DEBUG_RX_CLK_DLY_EN		BIT(15)
+@@ -475,10 +485,56 @@ static int at803x_parse_dt(struct phy_device *phydev)
+ 	return 0;
+ }
+ 
+static int at803x_mode(struct phy_device *phydev)
+{
+	int mode;
+
+	mode = phy_read(phydev, AT803X_REG_CHIP_CONFIG) & AT803X_MODE_CFG_MASK;
+
+	if (mode == AT803X_MODE_CFG_BX1000_RGMII_50 ||
+	    mode == AT803X_MODE_CFG_BX1000_RGMII_75)
+		return AT803X_MODE_FIBER;
+	return AT803X_MODE_COPPER;
+}
+
+static int at803x_sfp_insert(void *upstream, const struct sfp_eeprom_id *id)
+{
+	struct phy_device *phydev = upstream;
+	__ETHTOOL_DECLARE_LINK_MODE_MASK(support) = { 0, };
+	phy_interface_t iface;
+
+	sfp_parse_support(phydev->sfp_bus, id, support);
+	iface = sfp_select_interface(phydev->sfp_bus, support);
+
+	if (iface != PHY_INTERFACE_MODE_SGMII &&
+	    iface != PHY_INTERFACE_MODE_1000BASEX) {
+		dev_info(&phydev->mdio.dev, "incompatible SFP module inserted;"
+			 "Only SGMII/1000BASEX are supported!\n");
+		return -EINVAL;
+	}
+
+	dev_info(&phydev->mdio.dev, "SFP interface %s", phy_modes(iface));
+
+	return 0;
+}
+
+static const struct sfp_upstream_ops at803x_sfp_ops = {
+	.attach = phy_sfp_attach,
+	.detach = phy_sfp_detach,
+	.module_insert = at803x_sfp_insert,
+};
+
+ static int at803x_probe(struct phy_device *phydev)
+ {
+ 	struct device *dev = &phydev->mdio.dev;
+ 	struct at803x_priv *priv;
+	int ret;
+
+	if (at803x_mode(phydev) == AT803X_MODE_FIBER) {
+		ret = phy_sfp_probe(phydev, &at803x_sfp_ops);
+		if (ret < 0)
+			return ret;
+	}
+ 
+ 	priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL);
+ 	if (!priv)
+@@ -658,6 +714,10 @@ static int at803x_read_status(struct phy_device *phydev)
+ {
+ 	int ss, err, old_link = phydev->link;
+ 
+	/* Handle (Fiber) SGMII to RGMII mode */
+	if (at803x_mode(phydev) == AT803X_MODE_FIBER)
+		return genphy_c37_read_status(phydev);
+
+ 	/* Update the link, but return if there was an error */
+ 	err = genphy_update_link(phydev);
+ 	if (err)
+@@ -712,6 +772,19 @@ static int at803x_read_status(struct phy_device *phydev)
+ 	return 0;
+ }
+ 
+static int at803x_config_aneg(struct phy_device *phydev)
+{
+	/* Handle (Fiber) SerDes to RGMII mode */
+	if (at803x_mode(phydev) == AT803X_MODE_FIBER) {
+		pr_warn("%s: fiber\n", __func__);
+		return genphy_c37_config_aneg(phydev);
+	}
+
+	pr_warn("%s: enter\n", __func__);
+
+	return genphy_config_aneg(phydev);
+}
+
+ static struct phy_driver at803x_driver[] = {
+ {
+ 	/* Qualcomm Atheros AR8035 */
+@@ -758,6 +831,7 @@ static struct phy_driver at803x_driver[] = {
+ 	.suspend		= at803x_suspend,
+ 	.resume			= at803x_resume,
+ 	/* PHY_GBIT_FEATURES */
+	.config_aneg		= at803x_config_aneg,
+ 	.read_status		= at803x_read_status,
+ 	.aneg_done		= at803x_aneg_done,
+ 	.ack_interrupt		= &at803x_ack_interrupt,
--- a/target/linux/x86/image/Makefile
+++ b/target/linux/x86/image/Makefile
@ -111,8 +111,8 @@ define Device/Default
  IMAGE/combined.img.gz := grub-config pc | combined | grub-install | gzip | append-metadata
  IMAGE/combined.vdi := grub-config pc | combined | grub-install | qemu-image vdi
  IMAGE/combined.vmdk := grub-config pc | combined | grub-install | qemu-image vmdk
-  IMAGE/rootfs.img := append-rootfs
-  IMAGE/rootfs.img.gz := append-rootfs | gzip
+  IMAGE/rootfs.img := append-rootfs | pad-to $(ROOTFS_PARTSIZE)
+  IMAGE/rootfs.img.gz := append-rootfs | pad-to $(ROOTFS_PARTSIZE) | gzip
  ARTIFACT/image-efi.iso := grub-config iso | iso efi
  IMAGE/combined-efi.img := grub-config efi | combined efi | grub-install efi | append-metadata
  IMAGE/combined-efi.img.gz := grub-config efi | combined efi | grub-install efi | gzip | append-metadata
--- a/toolchain/gcc/common.mk
+++ b/toolchain/gcc/common.mk
@ -115,7 +115,8 @@ GCC_CONFIGURE:= \
 		--with-mpfr=$(TOPDIR)/staging_dir/host \
 		--with-mpc=$(TOPDIR)/staging_dir/host \
 		--disable-decimal-float \
-		--with-diagnostics-color=auto-if-env
+		--with-diagnostics-color=auto-if-env \
+		--enable-__cxa_atexit
 ifneq ($(CONFIG_mips)$(CONFIG_mipsel),)
  GCC_CONFIGURE += --with-mips-plt
 endif
@ -150,14 +151,6 @@ ifdef CONFIG_sparc
 		--with-long-double-128
 endif

-ifeq ($(LIBC),uClibc)
-  GCC_CONFIGURE+= \
-		--disable-__cxa_atexit
-else
-  GCC_CONFIGURE+= \
-		--enable-__cxa_atexit
-endif
-
 ifneq ($(GCC_ARCH),)
  GCC_CONFIGURE+= --with-arch=$(GCC_ARCH)
 endif
--- a/tools/mkimage/Makefile
+++ b/tools/mkimage/Makefile
@ -7,11 +7,14 @@
 include $(TOPDIR)/rules.mk

 PKG_NAME:=mkimage
-PKG_VERSION:=2019.07
+PKG_VERSION:=2020.04

 PKG_SOURCE:=u-boot-$(PKG_VERSION).tar.bz2
-PKG_SOURCE_URL:=http://ftp.denx.de/pub/u-boot
-PKG_HASH:=bff4fa77e8da17521c030ca4c5b947a056c1b1be4d3e6ee8637020b8d50251d0
+PKG_SOURCE_URL:= \
+	https://mirror.cyberbits.eu/u-boot \
+	https://ftp.denx.de/pub/u-boot \
+	ftp://ftp.denx.de/pub/u-boot
+PKG_HASH:=fe732aaf037d9cc3c0909bad8362af366ae964bbdac6913a34081ff4ad565372

 HOST_BUILD_DIR:=$(BUILD_DIR_HOST)/u-boot-$(PKG_VERSION)

--- a/tools/mkimage/patches/030-allow-to-use-different-magic.patch
+++ b/tools/mkimage/patches/030-allow-to-use-different-magic.patch
@ -50,7 +50,7 @@ This patch makes it possible to set a custom image magic.
 			break;
 --- a/tools/default_image.c
 +++ b/tools/default_image.c
-@@ -116,7 +116,7 @@ static void image_set_header(void *ptr,
+@@ -120,7 +120,7 @@ static void image_set_header(void *ptr,
 	}
 
 	/* Build new header */
--- a/tools/mkimage/patches/050-Add-compatibility-with-non-Linux-hosts.patch
+++ b/tools/mkimage/patches/050-Add-compatibility-with-non-Linux-hosts.patch
@ -0,0 +1,95 @@
+From 590b23a46b7ae0f5ec5e8f57a85c0e7578c71141 Mon Sep 17 00:00:00 2001
+From: Hauke Mehrtens <hauke@hauke-m.de>
+Date: Sun, 26 Apr 2020 17:15:17 +0200
+Subject: [PATCH 1/2] Add compatibility with non Linux hosts
+
+This adds some changes to the u-boot tools to make it possible to build
+them on non Linux hosts like MacOS or FreeBSD.
+
+asm/byteorder.h, asm/posix_types.h, asm/types.h and linux/kernel.h are
+not available on such systems. Remove the include and add the necessary
+parts for these header files manually or remove the usage too.
+
+__u64 is not available on FreeBSD, remove its usage.
+
+<malloc.h> has been replaced by <stdlib.h>
+
+Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
+---
+ include/image.h             | 2 ++
+ include/imx8image.h         | 5 +++++
+ include/linux/posix_types.h | 2 ++
+ include/linux/types.h       | 4 +++-
+ lib/rsa/rsa-sign.c          | 2 +-
+ 5 files changed, 13 insertions(+), 2 deletions(-)
+
+--- a/include/image.h
+++ b/include/image.h
+@@ -16,7 +16,9 @@
+ #define __IMAGE_H__
+ 
+ #include "compiler.h"
+#ifdef linux
+ #include <asm/byteorder.h>
+#endif
+ #include <stdbool.h>
+ 
+ /* Define this to avoid #ifdefs later on */
+--- a/include/imx8image.h
+++ b/include/imx8image.h
+@@ -11,7 +11,12 @@
+ #include <image.h>
+ #include <inttypes.h>
+ #include "imagetool.h"
+#ifdef linux
+ #include "linux/kernel.h"
+#else
+#define ALIGN(x,a)		__ALIGN_MASK((x),(typeof(x))(a)-1)
+#define __ALIGN_MASK(x,mask)	(((x)+(mask))&~(mask))
+#endif
+ 
+ #define __packed   __attribute__((packed))
+ 
+--- a/include/linux/posix_types.h
+++ b/include/linux/posix_types.h
+@@ -43,6 +43,8 @@ typedef void (*__kernel_sighandler_t)(in
+ /* Type of a SYSV IPC key.  */
+ typedef int __kernel_key_t;
+ 
+#ifdef linux
+ #include <asm/posix_types.h>
+#endif
+ 
+ #endif /* _LINUX_POSIX_TYPES_H */
+--- a/include/linux/types.h
+++ b/include/linux/types.h
+@@ -2,7 +2,9 @@
+ #define _LINUX_TYPES_H
+ 
+ #include <linux/posix_types.h>
+#ifdef linux
+ #include <asm/types.h>
+#endif
+ #include <stdbool.h>
+ 
+ #ifndef __KERNEL_STRICT_NAMES
+@@ -142,7 +144,7 @@ typedef __u16 __bitwise __le16;
+ typedef __u16 __bitwise __be16;
+ typedef __u32 __bitwise __le32;
+ typedef __u32 __bitwise __be32;
+-#if defined(__GNUC__)
+#if defined(__GNUC__) && defined(linux)
+ typedef __u64 __bitwise __le64;
+ typedef __u64 __bitwise __be64;
+ #endif
+--- a/lib/rsa/rsa-sign.c
+++ b/lib/rsa/rsa-sign.c
+@@ -4,7 +4,7 @@
+  */
+ 
+ #include "mkimage.h"
+-#include <malloc.h>
+#include <stdlib.h>
+ #include <stdio.h>
+ #include <string.h>
+ #include <image.h>
--- a/tools/mkimage/patches/050-image_h_portability.patch
+++ b/tools/mkimage/patches/050-image_h_portability.patch
@ -1,207 +0,0 @@
-Some of the Linux header files are not available on non Linux host
-systems like FreeBSD or MacOSX.
-
-The __le32 and __be32 types are only defined in Linux in
-asm/byteorder.h, but not on all other BSD systems.
-Use uint32_t instead of __le32 and __be32.
-
-__swab32 is also a Linux only function, it looks like be32_to_cpu()
-would be better here anyway.
-
--- a/include/image.h
-+++ b/include/image.h
-@@ -16,7 +16,6 @@
- #define __IMAGE_H__
- 
- #include "compiler.h"
-#include <asm/byteorder.h>
- #include <stdbool.h>
- 
- /* Define this to avoid #ifdefs later on */
-@@ -317,13 +316,13 @@ enum {
-  * all data in network byte order (aka natural aka bigendian).
-  */
- typedef struct image_header {
-	__be32		ih_magic;	/* Image Header Magic Number	*/
-	__be32		ih_hcrc;	/* Image Header CRC Checksum	*/
-	__be32		ih_time;	/* Image Creation Timestamp	*/
-	__be32		ih_size;	/* Image Data Size		*/
-	__be32		ih_load;	/* Data	 Load  Address		*/
-	__be32		ih_ep;		/* Entry Point Address		*/
-	__be32		ih_dcrc;	/* Image Data CRC Checksum	*/
-+	uint32_t	ih_magic;	/* Image Header Magic Number	*/
-+	uint32_t	ih_hcrc;	/* Image Header CRC Checksum	*/
-+	uint32_t	ih_time;	/* Image Creation Timestamp	*/
-+	uint32_t	ih_size;	/* Image Data Size		*/
-+	uint32_t	ih_load;	/* Data	 Load  Address		*/
-+	uint32_t	ih_ep;		/* Entry Point Address		*/
-+	uint32_t	ih_dcrc;	/* Image Data CRC Checksum	*/
- 	uint8_t		ih_os;		/* Operating System		*/
- 	uint8_t		ih_arch;	/* CPU architecture		*/
- 	uint8_t		ih_type;	/* Image Type			*/
--- a/tools/mtk_image.h
-+++ b/tools/mtk_image.h
-@@ -15,8 +15,8 @@
- union gen_boot_header {
- 	struct {
- 		char name[12];
-		__le32 version;
-		__le32 size;
-+		uint32_t version;
-+		uint32_t size;
- 	};
- 
- 	uint8_t pad[0x200];
-@@ -32,14 +32,14 @@ union nand_boot_header {
- 		char name[12];
- 		char version[4];
- 		char id[8];
-		__le16 ioif;
-		__le16 pagesize;
-		__le16 addrcycles;
-		__le16 oobsize;
-		__le16 pages_of_block;
-		__le16 numblocks;
-		__le16 writesize_shift;
-		__le16 erasesize_shift;
-+		uint16_t ioif;
-+		uint16_t pagesize;
-+		uint16_t addrcycles;
-+		uint16_t oobsize;
-+		uint16_t pages_of_block;
-+		uint16_t numblocks;
-+		uint16_t writesize_shift;
-+		uint16_t erasesize_shift;
- 		uint8_t dummy[60];
- 		uint8_t ecc_parity[28];
- 	};
-@@ -54,14 +54,14 @@ union nand_boot_header {
- /* BootROM layout header */
- struct brom_layout_header {
- 	char name[8];
-	__le32 version;
-	__le32 header_size;
-	__le32 total_size;
-	__le32 magic;
-	__le32 type;
-	__le32 header_size_2;
-	__le32 total_size_2;
-	__le32 unused;
-+	uint32_t version;
-+	uint32_t header_size;
-+	uint32_t total_size;
-+	uint32_t magic;
-+	uint32_t type;
-+	uint32_t header_size_2;
-+	uint32_t total_size_2;
-+	uint32_t unused;
- };
- 
- #define BRLYT_NAME		"BRLYT"
-@@ -90,8 +90,8 @@ struct gen_device_header {
- struct gfh_common_header {
- 	uint8_t magic[3];
- 	uint8_t version;
-	__le16 size;
-	__le16 type;
-+	uint16_t size;
-+	uint16_t type;
- };
- 
- #define GFH_HEADER_MAGIC	"MMM"
-@@ -106,17 +106,17 @@ struct gfh_common_header {
- struct gfh_file_info {
- 	struct gfh_common_header gfh;
- 	char name[12];
-	__le32 unused;
-	__le16 file_type;
-+	uint32_t unused;
-+	uint16_t file_type;
- 	uint8_t flash_type;
- 	uint8_t sig_type;
-	__le32 load_addr;
-	__le32 total_size;
-	__le32 max_size;
-	__le32 hdr_size;
-	__le32 sig_size;
-	__le32 jump_offset;
-	__le32 processed;
-+	uint32_t load_addr;
-+	uint32_t total_size;
-+	uint32_t max_size;
-+	uint32_t hdr_size;
-+	uint32_t sig_size;
-+	uint32_t jump_offset;
-+	uint32_t processed;
- };
- 
- #define GFH_FILE_INFO_NAME	"FILE_INFO"
-@@ -129,16 +129,16 @@ struct gfh_file_info {
- 
- struct gfh_bl_info {
- 	struct gfh_common_header gfh;
-	__le32 attr;
-+	uint32_t attr;
- };
- 
- struct gfh_brom_cfg {
- 	struct gfh_common_header gfh;
-	__le32 cfg_bits;
-	__le32 usbdl_by_auto_detect_timeout_ms;
-+	uint32_t cfg_bits;
-+	uint32_t usbdl_by_auto_detect_timeout_ms;
- 	uint8_t unused[0x48];
-	__le32 usbdl_by_kcol0_timeout_ms;
-	__le32 usbdl_by_flag_timeout_ms;
-+	uint32_t usbdl_by_kcol0_timeout_ms;
-+	uint32_t usbdl_by_flag_timeout_ms;
- 	uint32_t pad;
- };
- 
-@@ -157,15 +157,15 @@ struct gfh_anti_clone {
- 	uint8_t ac_b2k;
- 	uint8_t ac_b2c;
- 	uint16_t pad;
-	__le32 ac_offset;
-	__le32 ac_len;
-+	uint32_t ac_offset;
-+	uint32_t ac_len;
- };
- 
- struct gfh_brom_sec_cfg {
- 	struct gfh_common_header gfh;
-	__le32 cfg_bits;
-+	uint32_t cfg_bits;
- 	char customer_name[0x20];
-	__le32 pad;
-+	uint32_t pad;
- };
- 
- #define BROM_SEC_CFG_JTAG_EN	1
-@@ -184,11 +184,11 @@ struct gfh_header {
- 
- union lk_hdr {
- 	struct {
-		__le32 magic;
-		__le32 size;
-+		uint32_t magic;
-+		uint32_t size;
- 		char name[32];
-		__le32 loadaddr;
-		__le32 mode;
-+		uint32_t loadaddr;
-+		uint32_t mode;
- 	};
- 
- 	uint8_t data[512];
--- a/tools/zynqmpbif.c
-+++ b/tools/zynqmpbif.c
-@@ -517,7 +517,7 @@ static int bif_add_bit(struct bif_entry
- 	debug("Bitstream Length: 0x%x\n", bitlen);
- 	for (i = 0; i < bitlen; i += sizeof(uint32_t)) {
- 		uint32_t *bitbin32 = (uint32_t *)&bitbin[i];
-		*bitbin32 = __swab32(*bitbin32);
-+		*bitbin32 = be32_to_cpu(*bitbin32);
- 	}
- 
- 	if (!bf->dest_dev)
--- a/tools/mkimage/patches/060-remove_kernel_includes.patch
+++ b/tools/mkimage/patches/060-remove_kernel_includes.patch
@ -1,29 +0,0 @@
-The Kernel includes are only available on Linux hosts, remove then on
-non Linux hosts. 
-
--- a/include/linux/posix_types.h
-+++ b/include/linux/posix_types.h
-@@ -43,6 +43,8 @@ typedef void (*__kernel_sighandler_t)(in
- /* Type of a SYSV IPC key.  */
- typedef int __kernel_key_t;
- 
-+#ifdef linux
- #include <asm/posix_types.h>
-+#endif
- 
- #endif /* _LINUX_POSIX_TYPES_H */
--- a/include/imx8image.h
-+++ b/include/imx8image.h
-@@ -11,7 +11,12 @@
- #include <image.h>
- #include <inttypes.h>
- #include "imagetool.h"
-+#ifdef linux
- #include "linux/kernel.h"
-+#else
-+#define ALIGN(x,a)		__ALIGN_MASK((x),(typeof(x))(a)-1)
-+#define __ALIGN_MASK(x,mask)	(((x)+(mask))&~(mask))
-+#endif
- 
- #define __packed   __attribute__((packed))
- 
--- a/tools/mkimage/patches/070-remove_generated_autoconf.patch
+++ b/tools/mkimage/patches/070-remove_generated_autoconf.patch
@ -0,0 +1,10 @@
+--- a/tools/imximage.c
+++ b/tools/imximage.c
+@@ -11,7 +11,6 @@
+ #include "imagetool.h"
+ #include <image.h>
+ #include "imximage.h"
+-#include <generated/autoconf.h>
+ 
+ #define UNDEFINED 0xFFFFFFFF
+ 
--- a/tools/mkimage/patches/210-link-libcrypto-static.patch
+++ b/tools/mkimage/patches/210-link-libcrypto-static.patch
@ -3,7 +3,7 @@ needed dependencies are added too.

 --- a/tools/Makefile
 +++ b/tools/Makefile
-@@ -151,7 +151,7 @@ ifneq ($(CONFIG_MX23)$(CONFIG_MX28)$(CON
+@@ -162,7 +162,7 @@ ifneq ($(CONFIG_MX23)$(CONFIG_MX28)$(CON
 HOSTCFLAGS_kwbimage.o += \
 	$(shell pkg-config --cflags libssl libcrypto 2> /dev/null || echo "")
 HOSTLOADLIBES_mkimage += \