mirror of
https://github.com/hanwckf/immortalwrt-mt798x.git
synced 2025-01-09 02:43:53 +08:00
ath79: Add support for OpenMesh MR600 v1
Device specifications: ====================== * Qualcomm/Atheros AR9344 rev 2 * 560/450/225 MHz (CPU/DDR/AHB) * 128 MB of RAM * 16 MB of SPI NOR flash - 2x 7 MB available; but one of the 7 MB regions is the recovery image * 2T2R 2.4 GHz Wi-Fi * 2T2R 5 GHz Wi-Fi * 4x GPIO-LEDs (2x wifi, 1x wps, 1x power) * 1x GPIO-button (reset) * TTL pins are on board (arrow points to VCC, then follows: GND, TX, RX) * 1x ethernet - AR8035 ethernet PHY (RGMII) - 10/100/1000 Mbps Ethernet - 802.3af POE - used as LAN interface * 12-24V 1A DC * internal antennas Flashing instructions: ====================== Various methods can be used to install the actual image on the flash. Two easy ones are: ap51-flash ---------- The tool ap51-flash (https://github.com/ap51-flash/ap51-flash) should be used to transfer the image to the u-boot when the device boots up. initramfs from TFTP ------------------- The serial console must be used to access the u-boot shell during bootup. It can then be used to first boot up the initramfs image from a TFTP server (here with the IP 192.168.1.21): setenv serverip 192.168.1.21 setenv ipaddr 192.168.1.1 tftpboot 0c00000 <filename-of-initramfs-kernel>.bin && bootm $fileaddr The actual sysupgrade image can then be transferred (on the LAN port) to the device via scp <filename-of-squashfs-sysupgrade>.bin root@192.168.1.1:/tmp/ On the device, the sysupgrade must then be started using sysupgrade -n /tmp/<filename-of-squashfs-sysupgrade>.bin Signed-off-by: Sven Eckelmann <sven@narfation.org> [rebase, make WLAN LEDs consistent, add LED migration] Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
This commit is contained in:
Sven Eckelmann
Adrian Schmutzler
parent
0fda8049a7
commit
4b35999588
@ -48,6 +48,7 @@ netgear,wnr2200-16m|\
|
||||
netgear,wnr612-v2|\
|
||||
ocedo,koala|\
|
||||
ocedo,raccoon|\
|
||||
openmesh,mr600-v1|\
|
||||
openmesh,om5p|\
|
||||
openmesh,om5p-ac-v2|\
|
||||
samsung,wam250|\
|
||||
|
||||
46
target/linux/ath79/dts/ar9344_openmesh_mr600-v1.dts
Normal file
46
target/linux/ath79/dts/ar9344_openmesh_mr600-v1.dts
Normal file
@ -0,0 +1,46 @@
|
||||
// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
|
||||
|
||||
#include "ar9344_openmesh_mr600.dtsi"
|
||||
|
||||
/ {
|
||||
compatible = "openmesh,mr600-v1", "qca,ar9344";
|
||||
model = "OpenMesh MR600 v1";
|
||||
|
||||
aliases {
|
||||
led-boot = &led_power_orange;
|
||||
led-failsafe = &led_power_orange;
|
||||
led-running = &led_power_orange;
|
||||
led-upgrade = &led_power_orange;
|
||||
};
|
||||
|
||||
leds {
|
||||
compatible = "gpio-leds";
|
||||
|
||||
wifi5g_green {
|
||||
label = "green:wifi5g";
|
||||
gpios = <&gpio 12 GPIO_ACTIVE_LOW>;
|
||||
linux,default-trigger = "phy0tpt";
|
||||
};
|
||||
|
||||
wps_blue {
|
||||
label = "blue:wps";
|
||||
gpios = <&gpio 13 GPIO_ACTIVE_LOW>;
|
||||
};
|
||||
|
||||
led_power_orange: power_orange {
|
||||
label = "orange:power";
|
||||
gpios = <&gpio 14 GPIO_ACTIVE_LOW>;
|
||||
default-state = "on";
|
||||
};
|
||||
};
|
||||
|
||||
leds-ath9k {
|
||||
compatible = "gpio-leds";
|
||||
|
||||
wifi2g {
|
||||
label = "blue:wifi2g";
|
||||
gpios = <&ath9k 0 GPIO_ACTIVE_LOW>;
|
||||
linux,default-trigger = "phy1tpt";
|
||||
};
|
||||
};
|
||||
};
|
||||
133
target/linux/ath79/dts/ar9344_openmesh_mr600.dtsi
Normal file
133
target/linux/ath79/dts/ar9344_openmesh_mr600.dtsi
Normal file
@ -0,0 +1,133 @@
|
||||
// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
|
||||
|
||||
#include "ar9344.dtsi"
|
||||
|
||||
#include <dt-bindings/gpio/gpio.h>
|
||||
#include <dt-bindings/input/input.h>
|
||||
|
||||
/ {
|
||||
chosen {
|
||||
/delete-property/ bootargs;
|
||||
};
|
||||
|
||||
aliases {
|
||||
serial0 = &uart;
|
||||
label-mac-device = ð0;
|
||||
};
|
||||
|
||||
keys {
|
||||
compatible = "gpio-keys";
|
||||
|
||||
reset {
|
||||
label = "reset";
|
||||
linux,code = <KEY_RESTART>;
|
||||
gpios = <&gpio 17 GPIO_ACTIVE_LOW>;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&ref {
|
||||
clock-frequency = <40000000>;
|
||||
};
|
||||
|
||||
&uart {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&spi {
|
||||
status = "okay";
|
||||
|
||||
flash@0 {
|
||||
compatible = "jedec,spi-nor";
|
||||
reg = <0>;
|
||||
spi-max-frequency = <40000000>;
|
||||
|
||||
/* partitions are passed via bootloader */
|
||||
partitions {
|
||||
compatible = "fixed-partitions";
|
||||
#address-cells = <1>;
|
||||
#size-cells = <1>;
|
||||
|
||||
partition@0 {
|
||||
label = "u-boot";
|
||||
reg = <0x000000 0x040000>;
|
||||
read-only;
|
||||
};
|
||||
|
||||
partition@40000 {
|
||||
label = "u-boot-env";
|
||||
reg = <0x040000 0x010000>;
|
||||
};
|
||||
|
||||
partition@50000 {
|
||||
label = "custom";
|
||||
reg = <0x050000 0x060000>;
|
||||
read-only;
|
||||
};
|
||||
|
||||
partition@b0000 {
|
||||
label = "inactive";
|
||||
reg = <0x0b0000 0x7a0000>;
|
||||
};
|
||||
|
||||
partition@850000 {
|
||||
label = "inactive2";
|
||||
reg = <0x850000 0x7a0000>;
|
||||
};
|
||||
|
||||
art: partition@ff0000 {
|
||||
label = "ART";
|
||||
reg = <0xff0000 0x010000>;
|
||||
read-only;
|
||||
};
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&mdio0 {
|
||||
status = "okay";
|
||||
|
||||
phy-mask = <0x1>;
|
||||
|
||||
phy0: ethernet-phy@0 {
|
||||
reg = <0>;
|
||||
eee-broken-100tx;
|
||||
eee-broken-1000t;
|
||||
};
|
||||
};
|
||||
|
||||
ð0 {
|
||||
status = "okay";
|
||||
|
||||
pll-data = <0x06000000 0x00000101 0x00001313>;
|
||||
|
||||
mtd-mac-address = <&art 0x0>;
|
||||
|
||||
phy-mode = "rgmii";
|
||||
phy-handle = <&phy0>;
|
||||
|
||||
gmac-config {
|
||||
device = <&gmac>;
|
||||
rgmii-gmac0 = <1>;
|
||||
};
|
||||
};
|
||||
|
||||
&wmac {
|
||||
status = "okay";
|
||||
|
||||
mtd-cal-data = <&art 0x1000>;
|
||||
mtd-mac-address = <&art 0x0>;
|
||||
mtd-mac-address-increment = <1>;
|
||||
};
|
||||
|
||||
&pcie {
|
||||
status = "okay";
|
||||
|
||||
ath9k: wifi@0,0 {
|
||||
compatible = "pci168c,0030";
|
||||
reg = <0x0000 0 0 0 0>;
|
||||
qca,no-eeprom;
|
||||
mtd-mac-address = <&art 0x0>;
|
||||
mtd-mac-address-increment = <8>;
|
||||
};
|
||||
};
|
||||
@ -46,6 +46,7 @@ ath79_setup_interfaces()
|
||||
netgear,ex7300|\
|
||||
ocedo,koala|\
|
||||
ocedo,raccoon|\
|
||||
openmesh,mr600-v1|\
|
||||
pcs,cap324|\
|
||||
pisen,ts-d084|\
|
||||
pisen,wmb001n|\
|
||||
|
||||
@ -120,6 +120,9 @@ case "$FIRMWARE" in
|
||||
ubnt,rocket-m)
|
||||
caldata_extract "art" 0x1000 0x1000
|
||||
;;
|
||||
openmesh,mr600-v1)
|
||||
caldata_extract "ART" 0x5000 0x440
|
||||
;;
|
||||
wd,mynet-n750)
|
||||
caldata_extract "art" 0x5000 0x440
|
||||
ath9k_patch_mac $(mtd_get_mac_ascii devdata "wlan5mac")
|
||||
|
||||
@ -17,6 +17,9 @@ engenius,epg5000)
|
||||
glinet,gl-mifi)
|
||||
migrate_leds ":net=:3g4g"
|
||||
;;
|
||||
openmesh,mr600-v1)
|
||||
migrate_leds ":wlan58=:wifi5g"
|
||||
;;
|
||||
pcs,cap324)
|
||||
migrate_leds "lan:amber=amber:lan" "lan:green=green:lan"
|
||||
;;
|
||||
|
||||
@ -50,6 +50,7 @@ platform_do_upgrade() {
|
||||
jjplus,ja76pf2)
|
||||
redboot_fis_do_upgrade "$1" linux
|
||||
;;
|
||||
openmesh,mr600-v1|\
|
||||
openmesh,om2p-v2|\
|
||||
openmesh,om2p-v4|\
|
||||
openmesh,om2p-hs-v1|\
|
||||
|
||||
@ -1525,6 +1525,26 @@ define Device/ocedo_ursus
|
||||
endef
|
||||
TARGET_DEVICES += ocedo_ursus
|
||||
|
||||
define Device/openmesh_mr600-common
|
||||
SOC := ar9344
|
||||
DEVICE_VENDOR := OpenMesh
|
||||
DEVICE_MODEL := MR600
|
||||
DEVICE_PACKAGES := uboot-envtools
|
||||
IMAGE_SIZE := 7808k
|
||||
BLOCKSIZE := 64k
|
||||
KERNEL := kernel-bin | append-dtb | lzma | uImage lzma | \
|
||||
pad-to $$(BLOCKSIZE)
|
||||
IMAGE/sysupgrade.bin := append-rootfs | pad-rootfs | \
|
||||
openmesh-image ce_type=MR600 | append-metadata
|
||||
endef
|
||||
|
||||
define Device/openmesh_mr600-v1
|
||||
$(Device/openmesh_mr600-common)
|
||||
DEVICE_VARIANT := v1
|
||||
SUPPORTED_DEVICES += mr600
|
||||
endef
|
||||
TARGET_DEVICES += openmesh_mr600-v1
|
||||
|
||||
define Device/openmesh_om2p-common
|
||||
DEVICE_VENDOR := OpenMesh
|
||||
DEVICE_PACKAGES := uboot-envtools
|
||||
|
||||
Loading…
x
Reference in New Issue
Block a user