Merge Official Source

2025-01-09 02:43:53 +08:00 · 2020-07-27 19:37:58 +08:00 · 2020-07-27 19:37:58 +08:00 · 2ceb8e57f9
commit 2ceb8e57f9
parent 8511aad15a 88689da65f
89 changed files with 1738 additions and 550 deletions
--- a/package/boot/tfa-layerscape/Makefile
+++ b/package/boot/tfa-layerscape/Makefile
@ -9,7 +9,7 @@ include $(TOPDIR)/rules.mk

 PKG_NAME:=tfa-layerscape
 PKG_VERSION:=LSDK-20.04
-PKG_RELEASE:=1
+PKG_RELEASE:=2

 PKG_SOURCE_PROTO:=git
 PKG_SOURCE_URL:=https://source.codeaurora.org/external/qoriq/qoriq-components/atf
@ -37,130 +37,115 @@ define Host/Install
 	$(INSTALL_BIN) $(HOST_BUILD_DIR)/plat/nxp/tools/byte_swap $(STAGING_DIR_HOST)/bin/tfa-byte-swap
 endef

-define Package/tfa-layerscape/ls1012afrdm
+define Package/tfa-generic
+  SECTION:=boot
+  CATEGORY:=Boot Loaders
+  DEPENDS:=@TARGET_layerscape_armv8_64b +layerscape-rcw +u-boot-fsl_$(subst tfa-,,$(1))
+  VARIANT:=$(subst tfa-,,$(1))
+endef
+
+define Package/tfa-ls1012a-frdm
+  $(Package/tfa-generic)
  TITLE:=NXP LS1012AFRDM Trusted Firmware
  PLAT:=ls1012afrdm
  BOOT_MODE:=qspi
-  BIN_BL2:=build/ls1012afrdm/release/bl2_qspi.pbl
-  BIN_FIP:=build/ls1012afrdm/release/fip.bin
 endef

-define Package/tfa-layerscape/ls1012ardb
+define Package/tfa-ls1012a-rdb
+  $(Package/tfa-generic)
  TITLE:=NXP LS1012ARDB Trusted Firmware
  PLAT:=ls1012ardb
  BOOT_MODE:=qspi
-  BIN_BL2:=build/ls1012ardb/release/bl2_qspi.pbl
-  BIN_FIP:=build/ls1012ardb/release/fip.bin
 endef

-define Package/tfa-layerscape/ls1012afrwy
+define Package/tfa-ls1012a-frwy-sdboot
+  $(Package/tfa-generic)
  TITLE:=NXP LS1012AFRWY Trusted Firmware
  PLAT:=ls1012afrwy
  BOOT_MODE:=qspi
-  BIN_BL2:=build/ls1012afrwy/release/bl2_qspi.pbl
-  BIN_FIP:=build/ls1012afrwy/release/fip.bin
 endef

-define Package/tfa-layerscape/ls1043ardb
+define Package/tfa-ls1043a-rdb
+  $(Package/tfa-generic)
  TITLE:=NXP LS1043ARDB Trusted Firmware
  PLAT:=ls1043ardb
  BOOT_MODE:=nor
-  BIN_BL2:=build/ls1043ardb/release/bl2_nor.pbl
-  BIN_FIP:=build/ls1043ardb/release/fip.bin
 endef

-define Package/tfa-layerscape/ls1043ardb-sdboot
+define Package/tfa-ls1043a-rdb-sdboot
+  $(Package/tfa-generic)
  TITLE:=NXP LS1043ARDB SD Boot Trusted Firmware
  PLAT:=ls1043ardb
  BOOT_MODE:=sd
-  BIN_BL2:=build/ls1043ardb/release/bl2_sd.pbl
-  BIN_FIP:=build/ls1043ardb/release/fip.bin
 endef

-define Package/tfa-layerscape/ls1046ardb
+define Package/tfa-ls1046a-rdb
+  $(Package/tfa-generic)
  TITLE:=NXP LS1046ARDB Trusted Firmware
  PLAT:=ls1046ardb
  BOOT_MODE:=qspi
-  BIN_BL2:=build/ls1046ardb/release/bl2_qspi.pbl
-  BIN_FIP:=build/ls1046ardb/release/fip.bin
 endef

-define Package/tfa-layerscape/ls1046ardb-sdboot
+define Package/tfa-ls1046a-rdb-sdboot
+  $(Package/tfa-generic)
  TITLE:=NXP LS1046ARDB SD Boot Trusted Firmware
  PLAT:=ls1046ardb
  BOOT_MODE:=sd
-  BIN_BL2:=build/ls1046ardb/release/bl2_sd.pbl
-  BIN_FIP:=build/ls1046ardb/release/fip.bin
 endef

-define Package/tfa-layerscape/ls1088ardb
+define Package/tfa-ls1088a-rdb
+  $(Package/tfa-generic)
  TITLE:=NXP LS1088ARDB Trusted Firmware
  PLAT:=ls1088ardb
  BOOT_MODE:=qspi
-  BIN_BL2:=build/ls1088ardb/release/bl2_qspi.pbl
-  BIN_FIP:=build/ls1088ardb/release/fip.bin
 endef

-define Package/tfa-layerscape/ls1088ardb-sdboot
+define Package/tfa-ls1088a-rdb-sdboot
+  $(Package/tfa-generic)
  TITLE:=NXP LS1088ARDB SD Boot Trusted Firmware
  PLAT:=ls1088ardb
  BOOT_MODE:=sd
-  BIN_BL2:=build/ls1088ardb/release/bl2_sd.pbl
-  BIN_FIP:=build/ls1088ardb/release/fip.bin
 endef

-define Package/tfa-layerscape/ls2088ardb
+define Package/tfa-ls2088a-rdb
+  $(Package/tfa-generic)
  TITLE:=NXP LS2088ARDB Trusted Firmware
  PLAT:=ls2088ardb
  BOOT_MODE:=nor
-  BIN_BL2:=build/ls2088ardb/release/bl2_nor.pbl
-  BIN_FIP:=build/ls2088ardb/release/fip.bin
-endef
-
-define Package/tfa-layerscape/Config
-  define Package/tfa-$(1)
-    SECTION:=boot
-    CATEGORY:=Boot Loaders
-    TITLE:=$(2)
-    DEPENDS:=@TARGET_layerscape_armv8_64b +layerscape-rcw +u-boot-$(1)
-    VARIANT:=$(1)
-    BIN_BL2:=$(3)
-    BIN_FIP:=$(4)
-  endef
 endef

 define Build/InstallDev
 	$(INSTALL_DIR) $(STAGING_DIR_IMAGE)
-	$(CP) $(PKG_BUILD_DIR)/$(BIN_BL2) $(STAGING_DIR_IMAGE)/$(BUILD_VARIANT)-bl2.pbl
-	$(CP) $(PKG_BUILD_DIR)/$(BIN_FIP) $(STAGING_DIR_IMAGE)/$(BUILD_VARIANT)-fip.bin
+	$(CP) $(PKG_BUILD_DIR)/build/$(PLAT)/release/bl2_$(BOOT_MODE).pbl \
+		$(STAGING_DIR_IMAGE)/fsl_$(BUILD_VARIANT)-bl2.pbl
+	$(CP) $(PKG_BUILD_DIR)/build/$(PLAT)/release/fip.bin \
+		$(STAGING_DIR_IMAGE)/fsl_$(BUILD_VARIANT)-fip.bin
 endef

 define Build/Compile
-	$(eval $(Package/tfa-layerscape/$(BUILD_VARIANT))) \
+	$(eval $(Package/tfa-$(BUILD_VARIANT))) \
 	$(MAKE) -C $(PKG_BUILD_DIR) CROSS_COMPILE=$(TARGET_CROSS) \
 		fip pbl PLAT=$(PLAT) BOOT_MODE=$(BOOT_MODE) \
-		RCW=$(STAGING_DIR_IMAGE)/$(BUILD_VARIANT)-rcw.bin \
-		BL33=$(STAGING_DIR_IMAGE)/$(BUILD_VARIANT)-uboot.bin \
+		RCW=$(STAGING_DIR_IMAGE)/fsl_$(BUILD_VARIANT)-rcw.bin \
+		BL33=$(STAGING_DIR_IMAGE)/fsl_$(BUILD_VARIANT)-uboot.bin \
 		FIPTOOL=$(STAGING_DIR_HOST)/bin/tfa-fiptool \
 		CREATE_PBL=$(STAGING_DIR_HOST)/bin/tfa-create-pbl \
 		BYTE_SWAP=$(STAGING_DIR_HOST)/bin/tfa-byte-swap
 endef

 TFAS := \
-  ls1012afrdm \
-  ls1012ardb \
-  ls1012afrwy \
-  ls1043ardb \
-  ls1043ardb-sdboot \
-  ls1046ardb \
-  ls1046ardb-sdboot \
-  ls1088ardb \
-  ls1088ardb-sdboot \
-  ls2088ardb
+  ls1012a-frdm \
+  ls1012a-rdb \
+  ls1012a-frwy-sdboot \
+  ls1043a-rdb \
+  ls1043a-rdb-sdboot \
+  ls1046a-rdb \
+  ls1046a-rdb-sdboot \
+  ls1088a-rdb \
+  ls1088a-rdb-sdboot \
+  ls2088a-rdb

 $(eval $(call HostBuild))
 $(foreach tfa,$(TFAS), \
-  $(eval $(Package/tfa-layerscape/$(tfa))) \
-  $(eval $(call Package/tfa-layerscape/Config,$(tfa),$(TITLE),$(BIN_BL2),$(BIN_FIP))) \
  $(eval $(call BuildPackage,tfa-$(tfa))) \
 )
--- a/package/boot/uboot-envtools/files/imx6
+++ b/package/boot/uboot-envtools/files/imx6
@ -14,10 +14,31 @@ touch /etc/config/ubootenv
 board=$(board_name)

 case "$board" in
-apalis*)
-	ubootenv_add_uci_config $(bootdev_from_uuid)boot0 -0x2200 0x2000 0x200 10
-	;;
-*gw5*)
+gw,imx6dl-gw51xx |\
+gw,imx6dl-gw52xx |\
+gw,imx6dl-gw53xx |\
+gw,imx6dl-gw54xx |\
+gw,imx6dl-gw551x |\
+gw,imx6dl-gw552x |\
+gw,imx6dl-gw553x |\
+gw,imx6dl-gw5904 |\
+gw,imx6dl-gw5907 |\
+gw,imx6dl-gw5910 |\
+gw,imx6dl-gw5912 |\
+gw,imx6dl-gw5913 |\
+gw,imx6q-gw51xx |\
+gw,imx6q-gw52xx |\
+gw,imx6q-gw53xx |\
+gw,imx6q-gw5400-a |\
+gw,imx6q-gw54xx |\
+gw,imx6q-gw551x |\
+gw,imx6q-gw552x |\
+gw,imx6q-gw553x |\
+gw,imx6q-gw5904 |\
+gw,imx6q-gw5907 |\
+gw,imx6q-gw5910 |\
+gw,imx6q-gw5912 |\
+gw,imx6q-gw5913 )
 	if [ -c /dev/mtd1 ]; then
 		# board boots from NAND
 		ubootenv_add_uci_config /dev/mtd1 0x0 0x20000 0x40000
@ -28,7 +49,12 @@ apalis*)
 		ubootenv_add_uci_config /dev/mmcblk0 0xd1400 0x20000
 	fi
 	;;
-wandboard)
+toradex,apalis_imx6q-eval |\
+toradex,apalis_imx6q-ixora |\
+toradex,apalis_imx6q-ixora-v1.1 )
+	ubootenv_add_uci_config $(bootdev_from_uuid)boot0 -0x2200 0x2000 0x200 10
+	;;
+wand,imx6dl-wandboard)
 	ubootenv_add_uci_config "/dev/mmcblk0" "0x60000" "0x2000" "0x2000"
 	;;
 esac
--- a/package/boot/uboot-layerscape/Makefile
+++ b/package/boot/uboot-layerscape/Makefile
@ -9,7 +9,7 @@ include $(TOPDIR)/rules.mk

 PKG_NAME:=uboot-layerscape
 PKG_VERSION:=LSDK-20.04
-PKG_RELEASE:=1
+PKG_RELEASE:=2

 PKG_SOURCE_PROTO:=git
 PKG_SOURCE_URL:=https://source.codeaurora.org/external/qoriq/qoriq-components/u-boot
@ -27,67 +27,67 @@ define U-Boot/Default
  ENV_SIZE:=0x2000
 endef

-define U-Boot/ls1012afrdm
+define U-Boot/fsl_ls1012a-frdm
  NAME:=NXP LS1012AFRDM
  UBOOT_CONFIG:=ls1012afrdm_tfa
  ENV_SIZE:=0x40000
 endef

-define U-Boot/ls1012ardb
+define U-Boot/fsl_ls1012a-rdb
  NAME:=NXP LS1012ARDB
  UBOOT_CONFIG:=ls1012ardb_tfa
  ENV_SIZE:=0x40000
 endef

-define U-Boot/ls1012afrwy
+define U-Boot/fsl_ls1012a-frwy-sdboot
  NAME:=NXP LS1012AFRWY
  UBOOT_CONFIG:=ls1012afrwy_tfa
  ENV_SIZE:=0x10000
 endef

-define U-Boot/ls1043ardb
+define U-Boot/fsl_ls1043a-rdb
  NAME:=NXP LS1043ARDB
  UBOOT_CONFIG:=ls1043ardb_tfa
 endef

-define U-Boot/ls1043ardb-sdboot
+define U-Boot/fsl_ls1043a-rdb-sdboot
  NAME:=NXP LS1043ARDB SD Card Boot
  UBOOT_CONFIG:=ls1043ardb_tfa
 endef

-define U-Boot/ls1046ardb
+define U-Boot/fsl_ls1046a-rdb
  NAME:=NXP LS1046ARDB
  UBOOT_CONFIG:=ls1046ardb_tfa
 endef

-define U-Boot/ls1046ardb-sdboot
+define U-Boot/fsl_ls1046a-rdb-sdboot
  NAME:=NXP LS1046ARDB SD Card Boot
  UBOOT_CONFIG:=ls1046ardb_tfa
 endef

-define U-Boot/ls1088ardb
+define U-Boot/fsl_ls1088a-rdb
  NAME:=NXP LS1088ARDB
  UBOOT_CONFIG:=ls1088ardb_tfa
 endef

-define U-Boot/ls1088ardb-sdboot
+define U-Boot/fsl_ls1088a-rdb-sdboot
  NAME:=NXP LS1088ARDB SD Card Boot
  UBOOT_CONFIG:=ls1088ardb_tfa
 endef

-define U-Boot/ls2088ardb
+define U-Boot/fsl_ls2088a-rdb
  NAME:=NXP LS2088ARDB
  UBOOT_CONFIG:=ls2088ardb_tfa
 endef

-define U-Boot/ls1021atwr
+define U-Boot/fsl_ls1021a-twr
  NAME:=NXP LS1021ATWR
  BUILD_SUBTARGET:=armv7
  UBOOT_CONFIG:=ls1021atwr_nor
  ENV_SIZE:=0x20000
 endef

-define U-Boot/ls1021atwr-sdboot
+define U-Boot/fsl_ls1021a-twr-sdboot
  NAME:=NXP LS1021ATWR SD Card Boot
  BUILD_SUBTARGET:=armv7
  UBOOT_CONFIG:=ls1021atwr_sdcard_ifc
@ -95,7 +95,7 @@ define U-Boot/ls1021atwr-sdboot
  ENV_SIZE:=0x20000
 endef

-define U-Boot/ls1021aiot-sdboot
+define U-Boot/fsl_ls1021a-iot-sdboot
  NAME:=NXP LS1021AIOT SD Card Boot
  BUILD_SUBTARGET:=armv7
  UBOOT_CONFIG:=ls1021aiot_sdcard
@ -104,19 +104,19 @@ define U-Boot/ls1021aiot-sdboot
 endef

 UBOOT_TARGETS := \
-  ls1012afrdm \
-  ls1012ardb \
-  ls1012afrwy \
-  ls1043ardb \
-  ls1043ardb-sdboot \
-  ls1046ardb \
-  ls1046ardb-sdboot \
-  ls1088ardb \
-  ls1088ardb-sdboot \
-  ls2088ardb \
-  ls1021atwr \
-  ls1021atwr-sdboot \
-  ls1021aiot-sdboot
+  fsl_ls1012a-frdm \
+  fsl_ls1012a-rdb \
+  fsl_ls1012a-frwy-sdboot \
+  fsl_ls1043a-rdb \
+  fsl_ls1043a-rdb-sdboot \
+  fsl_ls1046a-rdb \
+  fsl_ls1046a-rdb-sdboot \
+  fsl_ls1088a-rdb \
+  fsl_ls1088a-rdb-sdboot \
+  fsl_ls2088a-rdb \
+  fsl_ls1021a-twr \
+  fsl_ls1021a-twr-sdboot \
+  fsl_ls1021a-iot-sdboot

 define Build/InstallDev
 	$(INSTALL_DIR) $(STAGING_DIR_IMAGE)
--- a/package/boot/uboot-layerscape/files/fsl_ls1012a-frdm-uEnv.txt
+++ b/package/boot/uboot-layerscape/files/fsl_ls1012a-frdm-uEnv.txt
--- a/package/boot/uboot-layerscape/files/fsl_ls1012a-frwy-sdboot-uEnv.txt
+++ b/package/boot/uboot-layerscape/files/fsl_ls1012a-frwy-sdboot-uEnv.txt
--- a/package/boot/uboot-layerscape/files/fsl_ls1012a-rdb-uEnv.txt
+++ b/package/boot/uboot-layerscape/files/fsl_ls1012a-rdb-uEnv.txt
--- a/package/boot/uboot-layerscape/files/fsl_ls1021a-iot-sdboot-uEnv.txt
+++ b/package/boot/uboot-layerscape/files/fsl_ls1021a-iot-sdboot-uEnv.txt
--- a/package/boot/uboot-layerscape/files/fsl_ls1021a-twr-sdboot-uEnv.txt
+++ b/package/boot/uboot-layerscape/files/fsl_ls1021a-twr-sdboot-uEnv.txt
--- a/package/boot/uboot-layerscape/files/fsl_ls1021a-twr-uEnv.txt
+++ b/package/boot/uboot-layerscape/files/fsl_ls1021a-twr-uEnv.txt
--- a/package/boot/uboot-layerscape/files/fsl_ls1043a-rdb-sdboot-uEnv.txt
+++ b/package/boot/uboot-layerscape/files/fsl_ls1043a-rdb-sdboot-uEnv.txt
--- a/package/boot/uboot-layerscape/files/fsl_ls1043a-rdb-uEnv.txt
+++ b/package/boot/uboot-layerscape/files/fsl_ls1043a-rdb-uEnv.txt
--- a/package/boot/uboot-layerscape/files/fsl_ls1046a-rdb-sdboot-uEnv.txt
+++ b/package/boot/uboot-layerscape/files/fsl_ls1046a-rdb-sdboot-uEnv.txt
--- a/package/boot/uboot-layerscape/files/fsl_ls1046a-rdb-uEnv.txt
+++ b/package/boot/uboot-layerscape/files/fsl_ls1046a-rdb-uEnv.txt
--- a/package/boot/uboot-layerscape/files/fsl_ls1088a-rdb-sdboot-uEnv.txt
+++ b/package/boot/uboot-layerscape/files/fsl_ls1088a-rdb-sdboot-uEnv.txt
--- a/package/boot/uboot-layerscape/files/fsl_ls1088a-rdb-uEnv.txt
+++ b/package/boot/uboot-layerscape/files/fsl_ls1088a-rdb-uEnv.txt
--- a/package/boot/uboot-layerscape/files/fsl_ls2088a-rdb-uEnv.txt
+++ b/package/boot/uboot-layerscape/files/fsl_ls2088a-rdb-uEnv.txt
--- a/package/boot/uboot-mediatek/Makefile
+++ b/package/boot/uboot-mediatek/Makefile
@ -15,18 +15,18 @@ define U-Boot/Default
  DEFAULT:=y
 endef

-define U-Boot/mt7629
-  NAME:=MT7629
-  BUILD_SUBTARGET:=mt7629
-  UBOOT_CONFIG:=mt7629_rfb
-endef
-
 define U-Boot/mt7622
  NAME:=MT7622
  BUILD_SUBTARGET:=mt7622
  UBOOT_CONFIG:=mt7622_rfb
 endef

+define U-Boot/mt7623a_unielec_u7623
+  NAME:=UniElec U7623 (mt7623)
+  BUILD_SUBTARGET:=mt7623
+  UBOOT_CONFIG:=mt7623a_unielec_u7623_02
+endef
+
 define U-Boot/mt7623n_bpir2
  NAME:=Banana Pi R2 (mt7623)
  BUILD_SUBTARGET:=mt7623
@ -34,7 +34,13 @@ define U-Boot/mt7623n_bpir2
  UBOOT_CONFIG:=mt7623n_bpir2
 endef

-UBOOT_TARGETS := mt7629 mt7622 mt7623n_bpir2
+define U-Boot/mt7629
+  NAME:=MT7629
+  BUILD_SUBTARGET:=mt7629
+  UBOOT_CONFIG:=mt7629_rfb
+endef
+
+UBOOT_TARGETS := mt7629 mt7622 mt7623n_bpir2 mt7623a_unielec_u7623

 UBOOT_MAKE_FLAGS += $(UBOOT_IMAGE)

--- a/package/boot/uboot-mediatek/patches/008-board-mediatek-fix-mmc_get_boot_dev-for-platforms-wi.patch
+++ b/package/boot/uboot-mediatek/patches/008-board-mediatek-fix-mmc_get_boot_dev-for-platforms-wi.patch
@ -0,0 +1,51 @@
+From b0d1b85fb25a28a9532eaa9dda064b40a0e25f25 Mon Sep 17 00:00:00 2001
+From: David Woodhouse <dwmw2@infradead.org>
+Date: Sun, 12 Jul 2020 23:19:09 +0100
+Subject: [PATCH 1/3] board: mediatek: fix mmc_get_boot_dev() for platforms
+ without external SD
+
+On the UniElec U7623 board there is no external SD slot and the preloader
+doesn't fill in the magic field at 0x81dffff0 to indicate that it was
+booted from eMMC.
+
+Signed-off-by: David Woodhouse <dwmw2@infradead.org>
+---
+ board/mediatek/mt7623/mt7623_rfb.c | 7 +++++++
+ 1 file changed, 7 insertions(+)
+
+diff --git a/board/mediatek/mt7623/mt7623_rfb.c b/board/mediatek/mt7623/mt7623_rfb.c
+index 4ec2764976..984e75ccaf 100644
+--- a/board/mediatek/mt7623/mt7623_rfb.c
+++ b/board/mediatek/mt7623/mt7623_rfb.c
+@@ -4,6 +4,7 @@
+  */
+ 
+ #include <common.h>
+#include <mmc.h>
+ 
+ DECLARE_GLOBAL_DATA_PTR;
+ 
+@@ -15,10 +16,15 @@ int board_init(void)
+ 	return 0;
+ }
+ 
+#ifdef CONFIG_MMC
+ int mmc_get_boot_dev(void)
+ {
+ 	int g_mmc_devid = -1;
+ 	char *uflag = (char *)0x81DFFFF0;
+
+	if (!find_mmc_device(1))
+		return 0;
+
+ 	if (strncmp(uflag,"eMMC",4)==0) {
+ 		g_mmc_devid = 0;
+ 		printf("Boot From Emmc(id:%d)\n\n", g_mmc_devid);
+@@ -33,3 +39,4 @@ int mmc_get_env_dev(void)
+ {
+ 	return mmc_get_boot_dev();
+ }
+#endif
+-- 
+2.26.2
+
--- a/package/boot/uboot-mediatek/patches/009-board-mediatek-Add-support-for-UniElec-U7623-board.patch
+++ b/package/boot/uboot-mediatek/patches/009-board-mediatek-Add-support-for-UniElec-U7623-board.patch
@ -0,0 +1,310 @@
+From d13abe5b2c5b85228bdd34584fcbd642f1883668 Mon Sep 17 00:00:00 2001
+From: David Woodhouse <dwmw2@infradead.org>
+Date: Sun, 12 Jul 2020 23:23:05 +0100
+Subject: [PATCH 3/3] board: mediatek: Add support for UniElec U7623 board
+
+This is an MT7623A-based board, very similar to the Banana Pi R2.
+
+http://www.unielecinc.com/q/news/cn/p/product/detail.html?qd_guid=OjXwKCaRlN
+
+Signed-off-by: David Woodhouse <dwmw2@infradead.org>
+---
+ arch/arm/dts/Makefile                         |   1 +
+ .../arm/dts/mt7623a-unielec-u7623-02-emmc.dts | 211 ++++++++++++++++++
+ configs/mt7623a_unielec_u7623_02_defconfig    |  54 +++++
+ 3 files changed, 266 insertions(+)
+ create mode 100644 arch/arm/dts/mt7623a-unielec-u7623-02-emmc.dts
+ create mode 100644 configs/mt7623a_unielec_u7623_02_defconfig
+
+diff --git a/arch/arm/dts/Makefile b/arch/arm/dts/Makefile
+index 89fa448818..a140b1c8d4 100644
+--- a/arch/arm/dts/Makefile
+++ b/arch/arm/dts/Makefile
+@@ -938,6 +938,7 @@ dtb-$(CONFIG_SOC_K3_J721E) += k3-j721e-common-proc-board.dtb \
+ 
+ dtb-$(CONFIG_ARCH_MEDIATEK) += \
+ 	mt7622-rfb.dtb \
+	mt7623a-unielec-u7623-02-emmc.dtb \
+ 	mt7623n-bananapi-bpi-r2.dtb \
+ 	mt7629-rfb.dtb \
+ 	mt8512-bm1-emmc.dtb \
+diff --git a/arch/arm/dts/mt7623a-unielec-u7623-02-emmc.dts b/arch/arm/dts/mt7623a-unielec-u7623-02-emmc.dts
+new file mode 100644
+index 0000000000..fdeec75b05
+--- /dev/null
+++ b/arch/arm/dts/mt7623a-unielec-u7623-02-emmc.dts
+@@ -0,0 +1,211 @@
+/*
+ * Copyright (C) 2018 MediaTek Inc.
+ * Author: Ryder Lee <ryder.lee@mediatek.com>
+ *
+ * SPDX-License-Identifier: (GPL-2.0 OR MIT)
+ */
+
+/dts-v1/;
+#include "mt7623.dtsi"
+#include "mt7623-u-boot.dtsi"
+
+/ {
+	model = "UniElec U7623-02 eMMC";
+	compatible = "unielec,u7623-02-emmc", "mediatek,mt7623";
+
+	memory@80000000 {
+		device_type = "memory";
+		reg = <0 0x80000000 0 0x20000000>;
+	};
+
+	chosen {
+		stdout-path = &uart2;
+		tick-timer = &timer0;
+	};
+
+	reg_1p8v: regulator-1p8v {
+		compatible = "regulator-fixed";
+		regulator-name = "fixed-1.8V";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		regulator-boot-on;
+		regulator-always-on;
+	};
+
+	reg_3p3v: regulator-3p3v {
+		compatible = "regulator-fixed";
+		regulator-name = "fixed-3.3V";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-boot-on;
+		regulator-always-on;
+	};
+
+	reg_5v: regulator-5v {
+		compatible = "regulator-fixed";
+		regulator-name = "fixed-5V";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		regulator-boot-on;
+		regulator-always-on;
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		led3 {
+			label = "u7623-01:green:led3";
+			gpios = <&gpio 14 GPIO_ACTIVE_LOW>;
+			default-state = "off";
+		};
+
+		led4 {
+			label = "u7623-01:green:led4";
+			gpios = <&gpio 15 GPIO_ACTIVE_LOW>;
+			default-state = "off";
+		};
+	};
+};
+
+&eth {
+	status = "okay";
+	mediatek,gmac-id = <0>;
+	phy-mode = "rgmii";
+	mediatek,switch = "mt7530";
+	mediatek,mcm;
+
+	fixed-link {
+		speed = <1000>;
+		full-duplex;
+	};
+};
+
+&mmc0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc0_pins_default>;
+	status = "okay";
+	bus-width = <8>;
+	max-frequency = <50000000>;
+	cap-mmc-highspeed;
+	vmmc-supply = <&reg_3p3v>;
+	vqmmc-supply = <&reg_1p8v>;
+	non-removable;
+};
+
+&pinctrl {
+	ephy_default: ephy_default {
+		mux {
+			function = "eth";
+			groups = "mdc_mdio", "ephy";
+		};
+
+		conf {
+			pins = "G2_TXEN", "G2_TXD0", "G2_TXD1", "G2_TXD2",
+			       "G2_TXD3", "G2_TXC", "G2_RXC", "G2_RXD0",
+			       "G2_RXD1", "G2_RXD2", "G2_RXD3", "G2_RXDV",
+			       "MDC", "MDIO";
+			drive-strength = <12>;
+			mediatek,tdsel = <5>;
+		};
+	};
+
+	mmc0_pins_default: mmc0default {
+		mux {
+			function = "msdc";
+			groups =  "msdc0";
+		};
+
+		conf-cmd-data {
+			pins = "MSDC0_CMD", "MSDC0_DAT0", "MSDC0_DAT1",
+			       "MSDC0_DAT2", "MSDC0_DAT3", "MSDC0_DAT4",
+			       "MSDC0_DAT5", "MSDC0_DAT6", "MSDC0_DAT7";
+			input-enable;
+			bias-pull-up;
+		};
+
+		conf-clk {
+			pins = "MSDC0_CLK";
+			bias-pull-down;
+		};
+
+		conf-rst {
+			pins = "MSDC0_RSTB";
+			bias-pull-up;
+		};
+	};
+
+	pcie_default: pcie-default {
+		mux {
+			function = "pcie";
+			groups =  "pcie0_0_perst", "pcie1_0_perst";
+		};
+	};
+
+	uart0_pins_a: uart0-default {
+		mux {
+			function = "uart";
+			groups =  "uart0_0_txd_rxd";
+		};
+	};
+
+	uart1_pins_a: uart1-default {
+		mux {
+			function = "uart";
+			groups =  "uart1_0_txd_rxd";
+		};
+	};
+
+	uart2_pins_a: uart2-default {
+		mux {
+			function = "uart";
+			groups =  "uart2_0_txd_rxd";
+		};
+	};
+
+	uart2_pins_b: uart2-alt {
+		mux {
+			function = "uart";
+			groups =  "uart2_1_txd_rxd";
+		};
+	};
+};
+
+&pcie {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pcie_default>;
+	status = "okay";
+
+	pcie@0,0 {
+		status = "okay";
+	};
+
+	pcie@1,0 {
+		status = "okay";
+	};
+};
+
+&pcie0_phy {
+	status = "okay";
+};
+
+&pcie1_phy {
+	status = "okay";
+};
+
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_pins_a>;
+	status = "okay";
+};
+
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart1_pins_a>;
+	status = "okay";
+};
+
+&uart2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart2_pins_b>;
+	status = "okay";
+};
+diff --git a/configs/mt7623a_unielec_u7623_02_defconfig b/configs/mt7623a_unielec_u7623_02_defconfig
+new file mode 100644
+index 0000000000..72b5f31092
+--- /dev/null
+++ b/configs/mt7623a_unielec_u7623_02_defconfig
+@@ -0,0 +1,54 @@
+CONFIG_ARM=y
+CONFIG_SYS_THUMB_BUILD=y
+CONFIG_ARCH_MEDIATEK=y
+CONFIG_SYS_TEXT_BASE=0x81e00000
+CONFIG_SYS_MALLOC_F_LEN=0x4000
+CONFIG_ENV_SIZE=0x1000
+CONFIG_ENV_OFFSET=0x100000
+CONFIG_TARGET_MT7623=y
+CONFIG_NR_DRAM_BANKS=1
+CONFIG_DISTRO_DEFAULTS=y
+CONFIG_FIT=y
+CONFIG_FIT_VERBOSE=y
+CONFIG_BOOTDELAY=3
+CONFIG_SYS_CONSOLE_IS_IN_ENV=y
+CONFIG_DEFAULT_FDT_FILE="mt7623a-unielec-u7623-02-emmc.dtb"
+# CONFIG_DISPLAY_BOARDINFO is not set
+CONFIG_SYS_PROMPT="U-Boot> "
+CONFIG_CMD_BOOTMENU=y
+# CONFIG_CMD_ELF is not set
+# CONFIG_CMD_XIMG is not set
+CONFIG_CMD_GPIO=y
+CONFIG_CMD_GPT=y
+CONFIG_CMD_MMC=y
+CONFIG_CMD_READ=y
+# CONFIG_CMD_SETEXPR is not set
+# CONFIG_CMD_NFS is not set
+CONFIG_DEFAULT_DEVICE_TREE="mt7623a-unielec-u7623-02-emmc"
+CONFIG_ENV_IS_IN_MMC=y
+CONFIG_SYS_RELOC_GD_ENV_ADDR=y
+CONFIG_NET_RANDOM_ETHADDR=y
+CONFIG_REGMAP=y
+CONFIG_SYSCON=y
+CONFIG_CLK=y
+CONFIG_DM_MMC=y
+# CONFIG_MMC_QUIRKS is not set
+CONFIG_SUPPORT_EMMC_BOOT=y
+CONFIG_MMC_HS400_SUPPORT=y
+CONFIG_MMC_MTK=y
+CONFIG_PHY_FIXED=y
+CONFIG_DM_ETH=y
+CONFIG_MEDIATEK_ETH=y
+CONFIG_PINCTRL=y
+CONFIG_PINCONF=y
+CONFIG_PINCTRL_MT7623=y
+CONFIG_POWER_DOMAIN=y
+CONFIG_MTK_POWER_DOMAIN=y
+CONFIG_DM_SERIAL=y
+CONFIG_MTK_SERIAL=y
+CONFIG_SYSRESET=y
+CONFIG_SYSRESET_WATCHDOG=y
+CONFIG_TIMER=y
+CONFIG_MTK_TIMER=y
+CONFIG_WDT_MTK=y
+CONFIG_LZMA=y
+-- 
+2.26.2
+
--- a/package/boot/uboot-mediatek/patches/010-update-u7623-defconfig.patch
+++ b/package/boot/uboot-mediatek/patches/010-update-u7623-defconfig.patch
@ -0,0 +1,17 @@
+diff --git a/configs/mt7623n_bpir2_defconfig b/configs/mt7623n_bpir2_defconfig
+index 6b9fbd7e22..fb2a004803 100644
+--- a/configs/mt7623a_unielec_u7623_02_defconfig
+++ b/configs/mt7623a_unielec_u7623_02_defconfig
+@@ -52,3 +52,12 @@ CONFIG_TIMER=y
+ CONFIG_MTK_TIMER=y
+ CONFIG_WDT_MTK=y
+ CONFIG_LZMA=y
+CONFIG_CMD_BOOTZ=y
+CONFIG_OF_LIBFDT_OVERLAY=y
+#enables savenenv-command
+CONFIG_ENV_IS_IN_FAT=y
+CONFIG_ENV_FAT_INTERFACE="mmc"
+CONFIG_ENV_FAT_DEVICE_AND_PART="0:2"
+CONFIG_ENV_FAT_FILE="uboot.env"
+CONFIG_CMD_ASKENV=y
+CONFIG_CMD_SETEXPR=y
--- a/package/firmware/layerscape/fman-ucode/Makefile
+++ b/package/firmware/layerscape/fman-ucode/Makefile
@ -9,7 +9,7 @@ include $(TOPDIR)/rules.mk

 PKG_NAME:=fman-ucode
 PKG_VERSION:=LSDK-20.04
-PKG_RELEASE:=1
+PKG_RELEASE:=2

 PKG_SOURCE_PROTO:=git
 PKG_SOURCE_URL:=https://github.com/NXP/qoriq-fm-ucode.git
@ -31,9 +31,9 @@ endef
 define Build/InstallDev
 	$(INSTALL_DIR) $(STAGING_DIR_IMAGE)
 	$(CP) $(PKG_BUILD_DIR)/fsl_fman_ucode_ls1043_r1.1_106_4_18.bin \
-		$(STAGING_DIR_IMAGE)/ls1043ardb-fman.bin
+		$(STAGING_DIR_IMAGE)/fsl_ls1043a-rdb-fman.bin
 	$(CP) $(PKG_BUILD_DIR)/fsl_fman_ucode_ls1046_r1.0_106_4_18.bin \
-		$(STAGING_DIR_IMAGE)/ls1046ardb-fman.bin
+		$(STAGING_DIR_IMAGE)/fsl_ls1046a-rdb-fman.bin
 endef

 $(eval $(call BuildPackage,layerscape-fman))
--- a/package/firmware/layerscape/ls-dpl/Makefile
+++ b/package/firmware/layerscape/ls-dpl/Makefile
@ -9,7 +9,7 @@ include $(TOPDIR)/rules.mk

 PKG_NAME:=ls-dpl
 PKG_VERSION:=LSDK-20.04
-PKG_RELEASE:=1
+PKG_RELEASE:=2

 PKG_SOURCE_PROTO:=git
 PKG_SOURCE_URL:=https://source.codeaurora.org/external/qoriq/qoriq-components/mc-utils
@ -33,13 +33,13 @@ MAKE_VARS+= \
 define Build/InstallDev
 	$(INSTALL_DIR) $(STAGING_DIR_IMAGE)
 	$(CP) $(PKG_BUILD_DIR)/config/ls1088a/RDB/dpl-eth.0x1D_0x0D.dtb \
-		$(STAGING_DIR_IMAGE)/ls1088ardb-dpl.dtb
+		$(STAGING_DIR_IMAGE)/fsl_ls1088a-rdb-dpl.dtb
 	$(CP) $(PKG_BUILD_DIR)/config/ls1088a/RDB/dpc.0x1D-0x0D.dtb \
-		$(STAGING_DIR_IMAGE)/ls1088ardb-dpc.dtb
+		$(STAGING_DIR_IMAGE)/fsl_ls1088a-rdb-dpc.dtb
 	$(CP) $(PKG_BUILD_DIR)/config/ls2088a/RDB/dpl-eth.0x2A_0x41.dtb \
-		$(STAGING_DIR_IMAGE)/ls2088ardb-dpl.dtb
+		$(STAGING_DIR_IMAGE)/fsl_ls2088a-rdb-dpl.dtb
 	$(CP) $(PKG_BUILD_DIR)/config/ls2088a/RDB/dpc.0x2A_0x41.dtb \
-		$(STAGING_DIR_IMAGE)/ls2088ardb-dpc.dtb
+		$(STAGING_DIR_IMAGE)/fsl_ls2088a-rdb-dpc.dtb
 endef

 $(eval $(call BuildPackage,layerscape-dpl))
--- a/package/firmware/layerscape/ls-mc/Makefile
+++ b/package/firmware/layerscape/ls-mc/Makefile
@ -9,7 +9,7 @@ include $(TOPDIR)/rules.mk

 PKG_NAME:=ls-mc
 PKG_VERSION:=LSDK-20.04
-PKG_RELEASE:=1
+PKG_RELEASE:=2

 PKG_SOURCE_PROTO:=git
 PKG_SOURCE_URL:=https://github.com/NXP/qoriq-mc-binary.git
@ -31,9 +31,9 @@ endef
 define Build/InstallDev
 	$(INSTALL_DIR) $(STAGING_DIR_IMAGE)
 	$(CP) $(PKG_BUILD_DIR)/ls1088a/mc_10.20.4_ls1088a.itb \
-		$(STAGING_DIR_IMAGE)/ls1088ardb-mc.itb
+		$(STAGING_DIR_IMAGE)/fsl_ls1088a-rdb-mc.itb
 	$(CP) $(PKG_BUILD_DIR)/ls2088a/mc_10.20.4_ls2088a.itb \
-		$(STAGING_DIR_IMAGE)/ls2088ardb-mc.itb
+		$(STAGING_DIR_IMAGE)/fsl_ls2088a-rdb-mc.itb
 endef

 $(eval $(call BuildPackage,layerscape-mc))
--- a/package/firmware/layerscape/ls-rcw/Makefile
+++ b/package/firmware/layerscape/ls-rcw/Makefile
@ -9,7 +9,7 @@ include $(TOPDIR)/rules.mk

 PKG_NAME:=ls-rcw
 PKG_VERSION:=LSDK-20.04
-PKG_RELEASE:=1
+PKG_RELEASE:=2

 PKG_SOURCE_PROTO:=git
 PKG_SOURCE_URL:=https://source.codeaurora.org/external/qoriq/qoriq-components/rcw
@ -26,34 +26,34 @@ define Package/layerscape-rcw
 endef

 BOARDS := \
-  ls1012ardb \
-  ls1012afrdm \
-  ls1012afrwy \
-  ls1043ardb \
-  ls1043ardb-sdboot \
-  ls1046ardb \
-  ls1046ardb-sdboot \
-  ls1088ardb \
-  ls1088ardb-sdboot \
-  ls2088ardb \
-  ls1021atwr
+  ls1012a-rdb \
+  ls1012a-frdm \
+  ls1012a-frwy-sdboot \
+  ls1043a-rdb \
+  ls1043a-rdb-sdboot \
+  ls1046a-rdb \
+  ls1046a-rdb-sdboot \
+  ls1088a-rdb \
+  ls1088a-rdb-sdboot \
+  ls2088a-rdb \
+  ls1021a-twr

-RCW_ls1012ardb        :=ls1012ardb/R_SPNH_3508/rcw_1000_default.bin
-RCW_ls1012afrdm       :=ls1012afrdm/N_SSNP_3305/rcw_800.bin
-RCW_ls1012afrwy       :=ls1012afrwy/N_SSNP_3305/rcw_1000_default.bin
-RCW_ls1043ardb        :=ls1043ardb/RR_FQPP_1455/rcw_1600.bin
-RCW_ls1043ardb-sdboot :=ls1043ardb/RR_FQPP_1455/rcw_1600_sdboot.bin
-RCW_ls1046ardb        :=ls1046ardb/RR_FFSSPPPH_1133_5559/rcw_1800_qspiboot.bin
-RCW_ls1046ardb-sdboot :=ls1046ardb/RR_FFSSPPPH_1133_5559/rcw_1800_sdboot.bin
-RCW_ls1088ardb        :=ls1088ardb/FCQQQQQQQQ_PPP_H_0x1d_0x0d/rcw_1600_qspi.bin
-RCW_ls1088ardb-sdboot :=ls1088ardb/FCQQQQQQQQ_PPP_H_0x1d_0x0d/rcw_1600_sd.bin
-RCW_ls2088ardb        :=ls2088ardb/FFFFFFFF_PP_HH_0x2a_0x41/rcw_1800.bin
-RCW_ls1021atwr        :=ls1021atwr/SSR_PNS_30/rcw_1200.bin
+RCW_ls1012a-rdb         :=ls1012ardb/R_SPNH_3508/rcw_1000_default.bin
+RCW_ls1012a-frdm        :=ls1012afrdm/N_SSNP_3305/rcw_800.bin
+RCW_ls1012a-frwy-sdboot :=ls1012afrwy/N_SSNP_3305/rcw_1000_default.bin
+RCW_ls1043a-rdb         :=ls1043ardb/RR_FQPP_1455/rcw_1600.bin
+RCW_ls1043a-rdb-sdboot  :=ls1043ardb/RR_FQPP_1455/rcw_1600_sdboot.bin
+RCW_ls1046a-rdb         :=ls1046ardb/RR_FFSSPPPH_1133_5559/rcw_1800_qspiboot.bin
+RCW_ls1046a-rdb-sdboot  :=ls1046ardb/RR_FFSSPPPH_1133_5559/rcw_1800_sdboot.bin
+RCW_ls1088a-rdb         :=ls1088ardb/FCQQQQQQQQ_PPP_H_0x1d_0x0d/rcw_1600_qspi.bin
+RCW_ls1088a-rdb-sdboot  :=ls1088ardb/FCQQQQQQQQ_PPP_H_0x1d_0x0d/rcw_1600_sd.bin
+RCW_ls2088a-rdb         :=ls2088ardb/FFFFFFFF_PP_HH_0x2a_0x41/rcw_1800.bin
+RCW_ls1021a-twr         :=ls1021atwr/SSR_PNS_30/rcw_1200.bin

 define Build/InstallDev
 	$(INSTALL_DIR) $(STAGING_DIR_IMAGE)
 	$(foreach board,$(BOARDS), \
-		$(CP) $(PKG_BUILD_DIR)/$(RCW_$(board)) $(STAGING_DIR_IMAGE)/$(board)-rcw.bin;)
+		$(CP) $(PKG_BUILD_DIR)/$(RCW_$(board)) $(STAGING_DIR_IMAGE)/fsl_$(board)-rcw.bin;)
 endef

 $(eval $(call BuildPackage,layerscape-rcw))
--- a/package/kernel/kmod-sched-cake-oot/Makefile
+++ b/package/kernel/kmod-sched-cake-oot/Makefile
@ -13,9 +13,9 @@ PKG_RELEASE:=1

 PKG_SOURCE_PROTO:=git
 PKG_SOURCE_URL:=https://github.com/dtaht/sch_cake.git
-PKG_SOURCE_DATE:=2020-01-10
-PKG_SOURCE_VERSION:=aeff7a3e61ffa3159a8a95384d33e47a006211f4
-PKG_MIRROR_HASH:=3f634fdc05d30988abb4cae2f7fcb4bd55ff10b0b354ac16b8577e85a4b74f6f
+PKG_SOURCE_DATE:=2020-07-24
+PKG_SOURCE_VERSION:=48979385757f3408c3427b3ebbf5963efdada5aa
+PKG_MIRROR_HASH:=0e8ed53f55e28ad0c30f20293c16988876bae8d6f70f5629a43cf2ce1e49fc51
 PKG_MAINTAINER:=Kevin Darbyshire-Bryant <ldir@darbyshire-bryant.me.uk>

 include $(INCLUDE_DIR)/package.mk
--- a/package/kernel/mac80211/patches/subsys/600-mac80211-util-don-t-warn-on-missing-sband-iftype-dat.patch
+++ b/package/kernel/mac80211/patches/subsys/600-mac80211-util-don-t-warn-on-missing-sband-iftype-dat.patch
@ -0,0 +1,28 @@
+From db6d1e942f5a2828e1245e16ceb997f537a2d1a4 Mon Sep 17 00:00:00 2001
+From: David Bauer <mail@david-bauer.net>
+Date: Sat, 25 Jul 2020 01:43:26 +0200
+Subject: [PATCH] mac80211: util: don't warn on missing sband iftype data
+
+The kernel currently floods the ringbuffer with warnings when adding a
+mesh interface for a device not support HE 6GHz modes.
+
+Return without warning in this case, as mesh_add_he_6ghz_cap_ie calls
+ieee80211_ie_build_he_6ghz_cap regardless of the supported interface
+modes.
+
+Signed-off-by: David Bauer <mail@david-bauer.net>
+---
+ net/mac80211/util.c | 2 +-
+ 1 file changed, 1 insertion(+), 1 deletion(-)
+
+--- a/net/mac80211/util.c
+++ b/net/mac80211/util.c
+@@ -2875,7 +2875,7 @@ void ieee80211_ie_build_he_6ghz_cap(stru
+ 		return;
+ 
+ 	iftd = ieee80211_get_sband_iftype_data(sband, iftype);
+-	if (WARN_ON(!iftd))
+	if (!iftd)
+ 		return;
+ 
+ 	cap = le16_to_cpu(iftd->he_6ghz_capa.capa);
--- a/package/network/config/firewall/Makefile
+++ b/package/network/config/firewall/Makefile
@ -13,9 +13,9 @@ PKG_RELEASE:=1

 PKG_SOURCE_PROTO:=git
 PKG_SOURCE_URL=$(PROJECT_GIT)/project/firewall3.git
-PKG_SOURCE_DATE:=2019-11-22
-PKG_SOURCE_VERSION:=8174814a507489ebbe8bb85c1004e1f02919ca82
-PKG_MIRROR_HASH:=84e0cca2d47470bdb1788a8ae044cc425be8ff650a1137474ba43a15040085da
+PKG_SOURCE_DATE:=2020-07-25
+PKG_SOURCE_VERSION:=e9b90dfac2225927c035f6a76277b850c282dc9a
+PKG_MIRROR_HASH:=9164089058b5c8d62e81806dcd2261b9f78b050fb40cd84cbd127794ad7a940e
 PKG_MAINTAINER:=Jo-Philipp Wich <jo@mein.io>
 PKG_LICENSE:=ISC

--- a/package/system/procd/Makefile
+++ b/package/system/procd/Makefile
@ -12,9 +12,9 @@ PKG_RELEASE:=1

 PKG_SOURCE_PROTO:=git
 PKG_SOURCE_URL=$(PROJECT_GIT)/project/procd.git
-PKG_SOURCE_DATE:=2020-07-20
-PKG_SOURCE_VERSION:=66ae2d947ea463c53de1bf2ed5491c9926694f02
-PKG_MIRROR_HASH:=c66fb1d6f89c110b59cc53595754522272a9e62aaf1970a5aea34fe528ec3dcd
+PKG_SOURCE_DATE:=2020-07-25
+PKG_SOURCE_VERSION:=5cb3715a079c09d1e66a6455a246347c7cf7b998
+PKG_MIRROR_HASH:=ab4e79ba5d1180ce850c811d346de7275889ba4df6f82e373c416f30da89ad12
 CMAKE_INSTALL:=1

 PKG_LICENSE:=GPL-2.0
--- a/target/linux/ath79/dts/ar9344_compex_wpj344-16m.dts
+++ b/target/linux/ath79/dts/ar9344_compex_wpj344-16m.dts
@ -131,7 +131,7 @@

 		qca,ar8327-initvals = <
 			0x04 0x07600000 /* PORT0 PAD MODE CTRL */
-			0x10 0x80000080 /* POWER_ON_STRIP */
+			0x10 0x80000080 /* POWER_ON_STRAP */
 			0x50 0x00000000 /* LED_CTRL0 */
 			0x54 0xc737c737 /* LED_CTRL1 */
 			0x58 0x00000000 /* LED_CTRL2 */
--- a/target/linux/ath79/dts/ar9344_tplink_tl-wdr4300.dtsi
+++ b/target/linux/ath79/dts/ar9344_tplink_tl-wdr4300.dtsi
@ -99,7 +99,7 @@

 		qca,ar8327-initvals = <
 			0x04 0x07600000 /* PORT0 PAD MODE CTRL */
-			0x10 0x80000080 /* POWER_ON_STRIP */
+			0x10 0x80000080 /* POWER_ON_STRAP */
 			0x50 0xc737c737 /* LED_CTRL0 */
 			0x54 0x00000000 /* LED_CTRL1 */
 			0x58 0x00000000 /* LED_CTRL2 */
--- a/target/linux/ath79/dts/ar9344_wd_mynet-n750.dts
+++ b/target/linux/ath79/dts/ar9344_wd_mynet-n750.dts
@ -192,7 +192,7 @@

 		qca,ar8327-initvals = <
 			0x04 0x07600000 /* PORT0 PAD MODE CTRL */
-			0x10 0x80000080 /* POWER_ON_STRIP */
+			0x10 0x80000080 /* POWER_ON_STRAP */
 			0x50 0xc737c737 /* LED_CTRL0 */
 			0x54 0x00000000 /* LED_CTRL1 */
 			0x58 0x00000000 /* LED_CTRL2 */
--- a/target/linux/ath79/dts/qca9558_comfast_cf-wr650ac.dtsi
+++ b/target/linux/ath79/dts/qca9558_comfast_cf-wr650ac.dtsi
@ -51,7 +51,7 @@
 		qca,ar8327-initvals = <
 			0x04 0x87600000 /* PORT0 PAD MODE CTRL */
 			0x0c 0x00080080 /* PORT6 PAD MODE CTRL */
-			0x10 0x81000080 /* POWER_ON_STRIP */
+			0x10 0x81000080 /* POWER_ON_STRAP */
 			0x7c 0x0000007e /* PORT0_STATUS */
 			0x94 0x0000007e /* PORT6 STATUS */
 			>;
--- a/target/linux/ath79/dts/qca9558_tplink_tl-wr1043nd.dtsi
+++ b/target/linux/ath79/dts/qca9558_tplink_tl-wr1043nd.dtsi
@ -134,7 +134,7 @@
 		qca,ar8327-initvals = <
 			0x04 0x00080080 /* PORT0 PAD MODE CTRL */
 			0x0c 0x07600000 /* PORT6 PAD MODE CTRL */
-			0x10 0x81000080 /* POWER_ON_STRIP */
+			0x10 0x81000080 /* POWER_ON_STRAP */
 			0x50 0xcc35cc35 /* LED_CTRL0 */
 			0x54 0xca35ca35 /* LED_CTRL1 */
 			0x58 0xc935c935 /* LED_CTRL2 */
--- a/target/linux/ath79/dts/qca9558_trendnet_tew-823dru.dts
+++ b/target/linux/ath79/dts/qca9558_trendnet_tew-823dru.dts
@ -170,7 +170,7 @@
 		qca,ar8327-initvals = <
 			0x04 0x00080080 /* PORT0 PAD MODE CTRL */
 			0x0c 0x07600000 /* PORT6 PAD MODE CTRL */
-			0x10 0x81000080 /* POWER_ON_STRIP */
+			0x10 0x81000080 /* POWER_ON_STRAP */
 			0x7c 0x0000007e /* PORT0_STATUS */
 			0x94 0x0000007e /* PORT6 STATUS */
 		>;
--- a/target/linux/ath79/dts/qca9558_zyxel_nbg6716.dts
+++ b/target/linux/ath79/dts/qca9558_zyxel_nbg6716.dts
@ -210,7 +210,7 @@
 		qca,ar8327-initvals = <
 			0x04 0x87600000 /* PORT0 PAD MODE CTRL */
 			0x0c 0x00080080 /* PORT6 PAD MODE CTRL */
-			0x10 0x81000080 /* POWER_ON_STRIP */
+			0x10 0x81000080 /* POWER_ON_STRAP */
 			0x50 0xffb7ffb7 /* LED_CTRL0 */
 			0x54 0xffb7ffb7 /* LED_CTRL1 */
 			0x58 0xffb7ffb7 /* LED_CTRL2 */
--- a/target/linux/ath79/dts/qca9563_compex_wpj563.dts
+++ b/target/linux/ath79/dts/qca9563_compex_wpj563.dts
@ -0,0 +1,145 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/dts-v1/;
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+#include "qca956x.dtsi"
+
+/ {
+	model = "Compex WPJ563";
+	compatible = "compex,wpj563", "qca,qca9563";
+
+	aliases {
+		label-mac-device = &eth0;
+		led-boot = &led_sig4;
+		led-failsafe = &led_sig4;
+		led-running = &led_sig4;
+		led-upgrade = &led_sig4;
+	};
+
+	beeper {
+		compatible = "gpio-beeper";
+		gpios = <&gpio 19 GPIO_ACTIVE_HIGH>;
+	};
+
+	keys {
+		compatible = "gpio-keys";
+
+		reset {
+			label = "reset";
+			linux,code = <KEY_RESTART>;
+			gpios = <&gpio 2 GPIO_ACTIVE_LOW>;
+			debounce-interval = <60>;
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		sig1 {
+			label = "wpj563:green:sig1";
+			gpios = <&gpio 1 GPIO_ACTIVE_LOW>;
+		};
+
+		sig2 {
+			label = "wpj563:green:sig2";
+			gpios = <&gpio 5 GPIO_ACTIVE_LOW>;
+		};
+
+		sig3 {
+			label = "wpj563:green:sig4";
+			gpios = <&gpio 6 GPIO_ACTIVE_LOW>;
+		};
+
+		led_sig4: sig4 {
+			label = "wpj563:green:sig4";
+			gpios = <&gpio 7 GPIO_ACTIVE_LOW>;
+		};
+	};
+};
+
+&pcie {
+	status = "okay";
+};
+
+&spi {
+	status = "okay";
+
+	num-cs = <1>;
+
+	flash@0 {
+		compatible = "jedec,spi-nor";
+		reg = <0>;
+		spi-max-frequency = <25000000>;
+
+		partitions {
+			compatible = "fixed-partitions";
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			uboot: partition@0 {
+				label = "u-boot";
+				reg = <0x000000 0x030000>;
+				read-only;
+			};
+
+			partition@30000 {
+				compatible = "denx,uimage";
+				label = "firmware";
+				reg = <0x030000 0xfc0000>;
+			};
+
+			art: partition@ff0000 {
+				label = "art";
+				reg = <0xff0000 0x010000>;
+				read-only;
+			};
+		};
+	};
+};
+
+&mdio0 {
+	status = "okay";
+
+	phy-mask = <0>;
+
+	phy0: ethernet-phy@0 {
+		reg = <0>;
+		phy-mode = "sgmii";
+		qca,mib-poll-interval = <500>;
+
+		qca,ar8327-initvals = <
+			0x04 0x00080080 /* PORT0 PAD MODE CTRL */
+			0x7c 0x0000007e /* PORT0_STATUS */
+		>;
+	};
+};
+
+&eth0 {
+	status = "okay";
+
+	pll-data = <0x03000101 0x00000101 0x00001919>;
+
+	mtd-mac-address = <&uboot 0x2e010>;
+	phy-mode = "sgmii";
+	phy-handle = <&phy0>;
+};
+
+&usb_phy0 {
+	status = "okay";
+};
+
+&usb0 {
+	status = "okay";
+};
+
+&uart {
+	status = "okay";
+};
+
+&wmac {
+	status = "okay";
+
+	mtd-cal-data = <&art 0x1000>;
+};
--- a/target/linux/ath79/dts/qca9563_dlink_dir-842-c.dtsi
+++ b/target/linux/ath79/dts/qca9563_dlink_dir-842-c.dtsi
@ -109,7 +109,7 @@

 		qca,ar8327-initvals = <
 			0x04 0x00080080 /* PORT0 PAD MODE CTRL */
-			0x10 0x81000080 /* POWER_ON_STRIP */
+			0x10 0x81000080 /* POWER_ON_STRAP */
 			0x50 0xcc35cc35 /* LED_CTRL0 */
 			0x54 0xcb37cb37 /* LED_CTRL1 */
 			0x58 0x00000000 /* LED_CTRL2 */
--- a/target/linux/ath79/dts/qca9563_dlink_dir-859-a1.dts
+++ b/target/linux/ath79/dts/qca9563_dlink_dir-859-a1.dts
@ -144,7 +144,7 @@

 		qca,ar8327-initvals = <
 			0x04 0x00080080 /* PORT0 PAD MODE CTRL */
-			0x10 0x81000080 /* POWER_ON_STRIP */
+			0x10 0x81000080 /* POWER_ON_STRAP */
 			0x50 0xcc35cc35 /* LED_CTRL0 */
 			0x54 0xcb37cb37 /* LED_CTRL1 */
 			0x58 0x00000000 /* LED_CTRL2 */
--- a/target/linux/ath79/dts/qca9563_netgear_wndr.dtsi
+++ b/target/linux/ath79/dts/qca9563_netgear_wndr.dtsi
@ -187,7 +187,7 @@

 		qca,ar8327-initvals = <
 			0x04 0x00000080	/* PORT0 PAD MODE CTRL */
-			0x10 0x81000080	/* POWER_ON_STRIP */
+			0x10 0x81000080	/* POWER_ON_STRAP */
 			0x50 0xcc35cc35	/* LED_CTRL0 */
 			0x54 0xcb37cb37	/* LED_CTRL1 */
 			0x58 0x00000000	/* LED_CTRL2 */
--- a/target/linux/ath79/dts/qca9563_phicomm_k2t.dts
+++ b/target/linux/ath79/dts/qca9563_phicomm_k2t.dts
@ -114,7 +114,7 @@

 		qca,ar8327-initvals = <
 			0x04 0x00080080 /* PORT0 PAD MODE CTRL */
-			0x10 0x81000080 /* POWER_ON_STRIP */
+			0x10 0x81000080 /* POWER_ON_STRAP */
 			0x50 0xcc35cc35 /* LED_CTRL0 */
 			0x54 0xcb37cb37 /* LED_CTRL1 */
 			0x58 0x00000000 /* LED_CTRL2 */
--- a/target/linux/ath79/dts/qca9563_tplink_archer-x7-v5.dtsi
+++ b/target/linux/ath79/dts/qca9563_tplink_archer-x7-v5.dtsi
@ -155,7 +155,7 @@
 			0x04 0x80080080 /* PORT0 PAD MODE CTRL */
 			0x08 0x00000000 /* PORT5 PAD MODE CTRL */
 			0x0c 0x00000000 /* PORT6 PAD MODE CTRL */
-			0x10 0x00000080 /* POWER_ON_STRIP */
+			0x10 0x00000080 /* POWER_ON_STRAP */
 			0x7c 0x0000007e /* PORT0_STATUS */
 			0x94 0x00000200 /* PORT6_STATUS */
 			>;
--- a/target/linux/ath79/dts/qca9563_yuncore_xd4200.dtsi
+++ b/target/linux/ath79/dts/qca9563_yuncore_xd4200.dtsi
@ -42,7 +42,7 @@

 		qca,ar8327-initvals = <
 			0x04 0x00080080 /* PORT0 PAD MODE CTRL */
-			0x10 0x81000080 /* POWER_ON_STRIP */
+			0x10 0x81000080 /* POWER_ON_STRAP */
 			0x50 0xcf37cf37 /* LED_CTRL0 */
 			0x54 0xcf37cf37 /* LED_CTRL1 */
 			0x58 0xcf37cf37 /* LED_CTRL2 */
--- a/target/linux/ath79/generic/base-files/etc/board.d/02_network
+++ b/target/linux/ath79/generic/base-files/etc/board.d/02_network
@ -135,7 +135,8 @@ ath79_setup_interfaces()
 		ucidef_add_switch "switch0" \
 			"0@eth0" "1:lan" "2:lan" "3:lan" "4:lan" "5:wan" "6@eth1"
 		;;
-	compex,wpj344-16m)
+	compex,wpj344-16m|\
+	compex,wpj563)
 		ucidef_add_switch "switch0" \
 			"0@eth0" "3:lan" "2:wan"
 		;;
@ -383,7 +384,8 @@ ath79_setup_macs()
 		lan_mac=$(fritz_tffs -n maca -i $(find_mtd_part "tffs (1)"))
 		wan_mac=$(fritz_tffs -n macb -i $(find_mtd_part "tffs (1)"))
 		;;
-	compex,wpj344-16m)
+	compex,wpj344-16m|\
+	compex,wpj563)
 		wan_mac=$(mtd_get_mac_binary u-boot 0x2e018)
 		;;
 	devolo,magic-2-wifi)
--- a/target/linux/ath79/image/generic.mk
+++ b/target/linux/ath79/image/generic.mk
@ -502,6 +502,18 @@ define Device/compex_wpj531-16m
 endef
 TARGET_DEVICES += compex_wpj531-16m

+define Device/compex_wpj563
+  SOC := qca9563
+  DEVICE_PACKAGES := kmod-usb2 kmod-usb3
+  IMAGE_SIZE := 16128k
+  DEVICE_VENDOR := Compex
+  DEVICE_MODEL := WPJ563
+  SUPPORTED_DEVICES += wpj563
+  IMAGES += cpximg-7a02.bin
+  IMAGE/cpximg-7a02.bin := append-kernel | pad-to $$$$(BLOCKSIZE) | append-rootfs | pad-rootfs | mkmylofw_16m 0x694 2
+endef
+TARGET_DEVICES += compex_wpj563
+
 define Device/devolo_dvl1200e
  SOC := qca9558
  DEVICE_VENDOR := devolo
--- a/target/linux/ath79/mikrotik/base-files/etc/board.d/02_network
+++ b/target/linux/ath79/mikrotik/base-files/etc/board.d/02_network
@ -34,6 +34,10 @@ ath79_setup_macs()
 	local mac_base="$(cat /sys/firmware/mikrotik/hard_config/mac_base)"

 	case "$board" in
+	mikrotik,routerboard-wap-g-5hact2hnd)
+		label_mac="$mac_base"
+		lan_mac="$mac_base"
+		;;
 	*)
 		label_mac="$mac_base"
 		wan_mac="$mac_base"
--- a/target/linux/generic/files/drivers/net/phy/ar8327.c
+++ b/target/linux/generic/files/drivers/net/phy/ar8327.c
@ -553,15 +553,15 @@ ar8327_hw_config_pdata(struct ar8xxx_priv *priv,
 	t = ar8327_get_pad_cfg(pdata->pad6_cfg);
 	ar8xxx_write(priv, AR8327_REG_PAD6_MODE, t);

-	pos = ar8xxx_read(priv, AR8327_REG_POWER_ON_STRIP);
+	pos = ar8xxx_read(priv, AR8327_REG_POWER_ON_STRAP);
 	new_pos = pos;

 	led_cfg = pdata->led_cfg;
 	if (led_cfg) {
 		if (led_cfg->open_drain)
-			new_pos |= AR8327_POWER_ON_STRIP_LED_OPEN_EN;
+			new_pos |= AR8327_POWER_ON_STRAP_LED_OPEN_EN;
 		else
-			new_pos &= ~AR8327_POWER_ON_STRIP_LED_OPEN_EN;
+			new_pos &= ~AR8327_POWER_ON_STRAP_LED_OPEN_EN;

 		ar8xxx_write(priv, AR8327_REG_LED_CTRL0, led_cfg->led_ctrl0);
 		ar8xxx_write(priv, AR8327_REG_LED_CTRL1, led_cfg->led_ctrl1);
@ -569,7 +569,7 @@ ar8327_hw_config_pdata(struct ar8xxx_priv *priv,
 		ar8xxx_write(priv, AR8327_REG_LED_CTRL3, led_cfg->led_ctrl3);

 		if (new_pos != pos)
-			new_pos |= AR8327_POWER_ON_STRIP_POWER_ON_SEL;
+			new_pos |= AR8327_POWER_ON_STRAP_POWER_ON_SEL;
 	}

 	if (pdata->sgmii_cfg) {
@ -586,12 +586,12 @@ ar8327_hw_config_pdata(struct ar8xxx_priv *priv,
 		ar8xxx_write(priv, AR8327_REG_SGMII_CTRL, t);

 		if (pdata->sgmii_cfg->serdes_aen)
-			new_pos &= ~AR8327_POWER_ON_STRIP_SERDES_AEN;
+			new_pos &= ~AR8327_POWER_ON_STRAP_SERDES_AEN;
 		else
-			new_pos |= AR8327_POWER_ON_STRIP_SERDES_AEN;
+			new_pos |= AR8327_POWER_ON_STRAP_SERDES_AEN;
 	}

-	ar8xxx_write(priv, AR8327_REG_POWER_ON_STRIP, new_pos);
+	ar8xxx_write(priv, AR8327_REG_POWER_ON_STRAP, new_pos);

 	if (pdata->leds && pdata->num_leds) {
 		int i;
--- a/target/linux/generic/files/drivers/net/phy/ar8327.h
+++ b/target/linux/generic/files/drivers/net/phy/ar8327.h
@ -53,10 +53,10 @@
 #define   AR8327_PAD_RGMII_TXCLK_DELAY_EN	BIT(25)
 #define   AR8327_PAD_RGMII_EN			BIT(26)

-#define AR8327_REG_POWER_ON_STRIP		0x010
-#define   AR8327_POWER_ON_STRIP_POWER_ON_SEL	BIT(31)
-#define   AR8327_POWER_ON_STRIP_LED_OPEN_EN	BIT(24)
-#define   AR8327_POWER_ON_STRIP_SERDES_AEN	BIT(7)
+#define AR8327_REG_POWER_ON_STRAP		0x010
+#define   AR8327_POWER_ON_STRAP_POWER_ON_SEL	BIT(31)
+#define   AR8327_POWER_ON_STRAP_LED_OPEN_EN	BIT(24)
+#define   AR8327_POWER_ON_STRAP_SERDES_AEN	BIT(7)

 #define AR8327_REG_INT_STATUS0			0x020
 #define   AR8327_INT0_VT_DONE			BIT(20)
--- a/target/linux/imx6/base-files/etc/board.d/02_network
+++ b/target/linux/imx6/base-files/etc/board.d/02_network
@ -10,22 +10,34 @@ board=$(board_name)
 board_config_update

 case "$board" in
-cubox-i |\
-gw51xx |\
-gw52xx |\
-gw5904 |\
-gw5907 |\
-gw5910 |\
-gw5912 |\
-gw5913)
+gw,imx6dl-gw51xx |\
+gw,imx6dl-gw52xx |\
+gw,imx6dl-gw5904 |\
+gw,imx6dl-gw5907 |\
+gw,imx6dl-gw5910 |\
+gw,imx6dl-gw5912 |\
+gw,imx6dl-gw5913 |\
+gw,imx6q-gw51xx |\
+gw,imx6q-gw52xx |\
+gw,imx6q-gw5904 |\
+gw,imx6q-gw5907 |\
+gw,imx6q-gw5910 |\
+gw,imx6q-gw5912 |\
+gw,imx6q-gw5913 |\
+solidrun,cubox-i/dl |\
+solidrun,cubox-i/q )
 	ucidef_set_interface_lan 'eth0'
 	;;
-gw53xx |\
-gw54xx |\
-gw552x)
+gw,imx6dl-gw53xx |\
+gw,imx6dl-gw54xx |\
+gw,imx6dl-gw552x |\
+gw,imx6q-gw53xx |\
+gw,imx6q-gw5400-a |\
+gw,imx6q-gw54xx |\
+gw,imx6q-gw552x )
 	ucidef_set_interfaces_lan_wan 'eth0' 'eth1'
 	;;
-wandboard)
+wand,imx6dl-wandboard )
 	ucidef_set_interface_wan 'eth0'
 	;;
 esac
--- a/target/linux/imx6/base-files/lib/imx6.sh
+++ b/target/linux/imx6/base-files/lib/imx6.sh
@ -2,9 +2,6 @@
 # Copyright (C) 2010-2013 OpenWrt.org
 #

-IMX6_BOARD_NAME=
-IMX6_MODEL=
-
 rootpartuuid() {
 	local cmdline=$(cat /proc/cmdline)
 	local bootpart=${cmdline##*root=}
@ -31,103 +28,3 @@ apalis_mount_boot() {
 		mount -o rw,noatime $(bootpart_from_uuid) /boot > /dev/null
 	}
 }
-
-imx6_board_detect() {
-	local machine
-	local name
-
-	machine=$(cat /proc/device-tree/model)
-
-	case "$machine" in
-	"Gateworks Ventana i.MX6 DualLite/Solo GW51XX" |\
-	"Gateworks Ventana i.MX6 Dual/Quad GW51XX")
-		name="gw51xx"
-		;;
-
-	"Gateworks Ventana i.MX6 DualLite/Solo GW52XX" |\
-	"Gateworks Ventana i.MX6 Dual/Quad GW52XX")
-		name="gw52xx"
-		;;
-
-	"Gateworks Ventana i.MX6 DualLite/Solo GW53XX" |\
-	"Gateworks Ventana i.MX6 Dual/Quad GW53XX")
-		name="gw53xx"
-		;;
-
-	"Gateworks Ventana i.MX6 DualLite/Solo GW54XX" |\
-	"Gateworks Ventana i.MX6 Dual/Quad GW54XX" |\
-	"Gateworks Ventana GW5400-A")
-		name="gw54xx"
-		;;
-
-	"Gateworks Ventana i.MX6 Dual/Quad GW551X" |\
-	"Gateworks Ventana i.MX6 DualLite/Solo GW551X")
-		name="gw551x"
-		;;
-
-	"Gateworks Ventana i.MX6 DualLite/Solo GW552X" |\
-	"Gateworks Ventana i.MX6 Dual/Quad GW552X")
-		name="gw552x"
-		;;
-
-	"Gateworks Ventana i.MX6 DualLite/Solo GW553X" |\
-	"Gateworks Ventana i.MX6 Dual/Quad GW553X")
-		name="gw553x"
-		;;
-
-	"Gateworks Ventana i.MX6 DualLite/Solo GW5904" |\
-	"Gateworks Ventana i.MX6 Dual/Quad GW5904")
-		name="gw5904"
-		;;
-
-	"Gateworks Ventana i.MX6 DualLite/Solo GW5907" |\
-	"Gateworks Ventana i.MX6 Dual/Quad GW5907")
-		name="gw5907"
-		;;
-
-	"Gateworks Ventana i.MX6 DualLite/Solo GW5910" |\
-	"Gateworks Ventana i.MX6 Dual/Quad GW5910")
-		name="gw5910"
-		;;
-
-	"Gateworks Ventana i.MX6 DualLite/Solo GW5912" |\
-	"Gateworks Ventana i.MX6 Dual/Quad GW5912")
-		name="gw5912"
-		;;
-
-	"Gateworks Ventana i.MX6 DualLite/Solo GW5913" |\
-	"Gateworks Ventana i.MX6 Dual/Quad GW5913")
-		name="gw5913"
-		;;
-
-	"SolidRun Cubox-i Solo/DualLite" |\
-	"SolidRun Cubox-i Dual/Quad")
-		name="cubox-i"
-		;;
-
-	"Toradex Apalis iMX6Q/D Module on Ixora Carrier Board" |\
-	"Toradex Apalis iMX6Q/D Module on Ixora Carrier Board V1.1")
-		name="apalis,ixora"
-		;;
-
-	"Toradex Apalis iMX6Q/D Module on Apalis Evaluation Board")
-		name="apalis,eval"
-		;;
-
-	"Wandboard i.MX6 Dual Lite Board")
-		name="wandboard"
-		;;
-
-	*)
-		name="generic"
-		;;
-	esac
-
-	[ -z "$IMX6_BOARD_NAME" ] && IMX6_BOARD_NAME="$name"
-	[ -z "$IMX6_MODEL" ] && IMX6_MODEL="$machine"
-
-	[ -e "/tmp/sysinfo/" ] || mkdir -p "/tmp/sysinfo/"
-
-	echo "$IMX6_BOARD_NAME" > /tmp/sysinfo/board_name
-	echo "$IMX6_MODEL" > /tmp/sysinfo/model
-}
--- a/target/linux/imx6/base-files/lib/preinit/01_sysinfo
+++ b/target/linux/imx6/base-files/lib/preinit/01_sysinfo
@ -1,7 +0,0 @@
-do_sysinfo_imx6() {
-	. /lib/imx6.sh
-
-	imx6_board_detect
-}
-
-boot_hook_add preinit_main do_sysinfo_imx6
--- a/target/linux/imx6/base-files/lib/preinit/79_move_config
+++ b/target/linux/imx6/base-files/lib/preinit/79_move_config
@ -6,7 +6,9 @@ move_config() {
 	local board=$(board_name)

 	case "$board" in
-	apalis*)
+	toradex,apalis_imx6q-eval |\
+	toradex,apalis_imx6q-ixora |\
+	toradex,apalis_imx6q-ixora-v1.1 )
 		if [ -b $(bootpart_from_uuid) ]; then
 			apalis_mount_boot
 			[ -f "/boot/$BACKUP_FILE" ] && mv -f "/boot/$BACKUP_FILE" /
--- a/target/linux/imx6/base-files/lib/upgrade/platform.sh
+++ b/target/linux/imx6/base-files/lib/upgrade/platform.sh
@ -8,7 +8,9 @@ RAMFS_COPY_BIN='blkid jffs2reset'

 enable_image_metadata_check() {
 	case "$(board_name)" in
-		apalis*)
+		toradex,apalis_imx6q-eval |\
+		toradex,apalis_imx6q-ixora |\
+		toradex,apalis_imx6q-ixora-v1.1 )
 			REQUIRE_IMAGE_METADATA=1
 			;;
 	esac
@ -34,13 +36,39 @@ platform_check_image() {
 	local board=$(board_name)

 	case "$board" in
-	apalis*)
-		return 0
-		;;
-	*gw5*)
+	gw,imx6dl-gw51xx |\
+	gw,imx6dl-gw52xx |\
+	gw,imx6dl-gw53xx |\
+	gw,imx6dl-gw54xx |\
+	gw,imx6dl-gw551x |\
+	gw,imx6dl-gw552x |\
+	gw,imx6dl-gw553x |\
+	gw,imx6dl-gw5904 |\
+	gw,imx6dl-gw5907 |\
+	gw,imx6dl-gw5910 |\
+	gw,imx6dl-gw5912 |\
+	gw,imx6dl-gw5913 |\
+	gw,imx6q-gw51xx |\
+	gw,imx6q-gw52xx |\
+	gw,imx6q-gw53xx |\
+	gw,imx6q-gw5400-a |\
+	gw,imx6q-gw54xx |\
+	gw,imx6q-gw551x |\
+	gw,imx6q-gw552x |\
+	gw,imx6q-gw553x |\
+	gw,imx6q-gw5904 |\
+	gw,imx6q-gw5907 |\
+	gw,imx6q-gw5910 |\
+	gw,imx6q-gw5912 |\
+	gw,imx6q-gw5913 )
 		nand_do_platform_check $board $1
 		return $?;
 		;;
+	toradex,apalis_imx6q-eval |\
+	toradex,apalis_imx6q-ixora |\
+	toradex,apalis_imx6q-ixora-v1.1 )
+		return 0
+		;;
 	esac

 	echo "Sysupgrade is not yet supported on $board."
@ -51,12 +79,38 @@ platform_do_upgrade() {
 	local board=$(board_name)

 	case "$board" in
-	apalis*)
-		apalis_do_upgrade "$1"
-		;;
-	*gw5*)
+	gw,imx6dl-gw51xx |\
+	gw,imx6dl-gw52xx |\
+	gw,imx6dl-gw53xx |\
+	gw,imx6dl-gw54xx |\
+	gw,imx6dl-gw551x |\
+	gw,imx6dl-gw552x |\
+	gw,imx6dl-gw553x |\
+	gw,imx6dl-gw5904 |\
+	gw,imx6dl-gw5907 |\
+	gw,imx6dl-gw5910 |\
+	gw,imx6dl-gw5912 |\
+	gw,imx6dl-gw5913 |\
+	gw,imx6q-gw51xx |\
+	gw,imx6q-gw52xx |\
+	gw,imx6q-gw53xx |\
+	gw,imx6q-gw5400-a |\
+	gw,imx6q-gw54xx |\
+	gw,imx6q-gw551x |\
+	gw,imx6q-gw552x |\
+	gw,imx6q-gw553x |\
+	gw,imx6q-gw5904 |\
+	gw,imx6q-gw5907 |\
+	gw,imx6q-gw5910 |\
+	gw,imx6q-gw5912 |\
+	gw,imx6q-gw5913 )
 		nand_do_upgrade "$1"
 		;;
+	toradex,apalis_imx6q-eval |\
+	toradex,apalis_imx6q-ixora |\
+	toradex,apalis_imx6q-ixora-v1.1 )
+		apalis_do_upgrade "$1"
+		;;
 	esac
 }

@ -64,7 +118,9 @@ platform_copy_config() {
 	local board=$(board_name)

 	case "$board" in
-	apalis*)
+	toradex,apalis_imx6q-eval |\
+	toradex,apalis_imx6q-ixora |\
+	toradex,apalis_imx6q-ixora-v1.1 )
 		apalis_copy_config
 		;;
 	esac
@ -74,7 +130,9 @@ platform_pre_upgrade() {
 	local board=$(board_name)

 	case "$board" in
-	apalis*)
+	toradex,apalis_imx6q-eval |\
+	toradex,apalis_imx6q-ixora |\
+	toradex,apalis_imx6q-ixora-v1.1 )
 		[ -z "$UPGRADE_BACKUP" ] && {
 			jffs2reset -y
 			umount /overlay
--- a/target/linux/lantiq/ase/config-5.4
+++ b/target/linux/lantiq/ase/config-5.4
@ -14,8 +14,6 @@ CONFIG_GPIO_GENERIC_PLATFORM=y
 CONFIG_LANTIQ_ETOP=y
 CONFIG_LEDS_TRIGGER_HEARTBEAT=y
 CONFIG_NLS=y
-# CONFIG_PSB6970_PHY is not set
-# CONFIG_RTL8366_SMI is not set
 CONFIG_SGL_ALLOC=y
 CONFIG_SOC_AMAZON_SE=y
 # CONFIG_SOC_XWAY is not set
--- a/target/linux/lantiq/config-5.4
+++ b/target/linux/lantiq/config-5.4
@ -194,13 +194,10 @@ CONFIG_PINCTRL_LANTIQ=y
 CONFIG_PINCTRL_XWAY=y
 CONFIG_POWER_RESET=y
 CONFIG_POWER_RESET_SYSCON=y
-CONFIG_PSB6970_PHY=y
 CONFIG_REGMAP=y
 CONFIG_REGMAP_MMIO=y
 CONFIG_RESET_CONTROLLER=y
 CONFIG_RESET_LANTIQ=y
-CONFIG_RTL8366RB_PHY=y
-CONFIG_RTL8366_SMI=y
 # CONFIG_SERIAL_8250 is not set
 CONFIG_SERIAL_LANTIQ=y
 # CONFIG_SOC_AMAZON_SE is not set
--- a/target/linux/lantiq/falcon/config-5.4
+++ b/target/linux/lantiq/falcon/config-5.4
@ -4,8 +4,6 @@ CONFIG_MTD_NAND_ECC_SW_HAMMING=y
 CONFIG_MTD_RAW_NAND=y
 CONFIG_MTD_SPLIT_FIRMWARE_NAME="linux"
 CONFIG_PINCTRL_FALCON=y
-# CONFIG_PSB6970_PHY is not set
-# CONFIG_RTL8366_SMI is not set
 CONFIG_SOC_FALCON=y
 # CONFIG_SOC_XWAY is not set
 CONFIG_SPI_FALCON=y
--- a/target/linux/lantiq/files-5.4/arch/mips/boot/dts/lantiq/amazonse_netgear_dgn1000b.dts
+++ b/target/linux/lantiq/files-5.4/arch/mips/boot/dts/lantiq/amazonse_netgear_dgn1000b.dts
@ -136,8 +136,8 @@
 				read-only;
 			};

-			partition@500000 {
-				reg = <0x50000 0x003a0000>;
+			partition@50000 {
+				reg = <0x50000 0x3a0000>;
 				label = "kernel";
 			};
 		};
--- a/target/linux/lantiq/files-5.4/arch/mips/boot/dts/lantiq/danube_arcadyan_arv4518pwr01.dtsi
+++ b/target/linux/lantiq/files-5.4/arch/mips/boot/dts/lantiq/danube_arcadyan_arv4518pwr01.dtsi
@ -155,7 +155,7 @@
 				reg = <0x20000 0x3d0000>;
 			};

-			boardconfig: partition@400000 {
+			boardconfig: partition@3f0000 {
 				label = "boardconfig";
 				reg = <0x3f0000 0x10000>;
 				read-only;
--- a/target/linux/lantiq/files-5.4/arch/mips/boot/dts/lantiq/danube_arcadyan_arv4525pw.dts
+++ b/target/linux/lantiq/files-5.4/arch/mips/boot/dts/lantiq/danube_arcadyan_arv4525pw.dts
@ -126,7 +126,7 @@
 				reg = <0x20000 0x3d0000>;
 			};

-			boardconfig: partition@400000 {
+			boardconfig: partition@3f0000 {
 				label = "boardconfig";
 				reg = <0x3f0000 0x10000>;
 				read-only;
--- a/target/linux/lantiq/files-5.4/arch/mips/boot/dts/lantiq/danube_arcadyan_arv7518pw.dts
+++ b/target/linux/lantiq/files-5.4/arch/mips/boot/dts/lantiq/danube_arcadyan_arv7518pw.dts
@ -181,7 +181,7 @@
 				reg = <0x20000 0x7d0000>;
 			};

-			boardconfig: partition@400000 {
+			boardconfig: partition@7f0000 {
 				label = "boardconfig";
 				reg = <0x7f0000 0x10000>;
 				read-only;
--- a/target/linux/lantiq/files-5.4/arch/mips/boot/dts/lantiq/danube_arcadyan_arv7525pw.dts
+++ b/target/linux/lantiq/files-5.4/arch/mips/boot/dts/lantiq/danube_arcadyan_arv7525pw.dts
@ -119,7 +119,7 @@
 				reg = <0x20000 0x3d0000>;
 			};

-			boardconfig: partition@400000 {
+			boardconfig: partition@3f0000 {
 				label = "board_config";
 				reg = <0x3f0000 0x10000>;
 				read-only;
--- a/target/linux/lantiq/files-5.4/arch/mips/boot/dts/lantiq/vr9_lantiq_easy80920.dtsi
+++ b/target/linux/lantiq/files-5.4/arch/mips/boot/dts/lantiq/vr9_lantiq_easy80920.dtsi
@ -245,8 +245,8 @@
 				read-only;
 			};

-			partition@500000 {
-				reg = <0x50000 0x003a0000>;
+			partition@50000 {
+				reg = <0x50000 0x3a0000>;
 				label = "kernel";
 			};
 		};
--- a/target/linux/lantiq/xway/config-5.4
+++ b/target/linux/lantiq/xway/config-5.4
@ -29,10 +29,13 @@ CONFIG_PCI=y
 # CONFIG_PCIE_LANTIQ is not set
 CONFIG_PCI_DOMAINS=y
 CONFIG_PCI_LANTIQ=y
+CONFIG_PSB6970_PHY=y
 CONFIG_REGULATOR=y
 CONFIG_REGULATOR_FIXED_VOLTAGE=y
 CONFIG_RTL8306_PHY=y
+CONFIG_RTL8366RB_PHY=y
 CONFIG_RTL8366S_PHY=y
+CONFIG_RTL8366_SMI=y
 CONFIG_RTL8367B_PHY=y
 CONFIG_RTL8367_PHY=y
 CONFIG_SGL_ALLOC=y
--- a/target/linux/lantiq/xway_legacy/config-5.4
+++ b/target/linux/lantiq/xway_legacy/config-5.4
@ -22,10 +22,13 @@ CONFIG_PCI=y
 # CONFIG_PCIE_LANTIQ is not set
 CONFIG_PCI_DOMAINS=y
 CONFIG_PCI_LANTIQ=y
+CONFIG_PSB6970_PHY=y
 CONFIG_REGULATOR=y
 CONFIG_REGULATOR_FIXED_VOLTAGE=y
 CONFIG_RTL8306_PHY=y
+CONFIG_RTL8366RB_PHY=y
 CONFIG_RTL8366S_PHY=y
+CONFIG_RTL8366_SMI=y
 CONFIG_RTL8367B_PHY=y
 CONFIG_RTL8367_PHY=y
 CONFIG_SGL_ALLOC=y
--- a/target/linux/layerscape/image/armv7.mk
+++ b/target/linux/layerscape/image/armv7.mk
@ -13,18 +13,19 @@ define Device/Default
  KERNEL_NAME := zImage
  KERNEL_LOADADDR := 0x80008000
  KERNEL_ENTRY_POINT := 0x80008000
+  DEVICE_DTS = $(lastword $(subst _, ,$(1)))
+  SUPPORTED_DEVICES = $(subst _,$(comma),$(1))
  IMAGE_SIZE := 64m
  IMAGE/sysupgrade.bin := append-kernel | pad-to 16M | \
    append-rootfs | pad-rootfs | \
    check-size $(LS_SYSUPGRADE_IMAGE_SIZE) | append-metadata
 endef

-define Device/ls1021atwr
+define Device/fsl_ls1021a-twr
  DEVICE_VENDOR := NXP
  DEVICE_MODEL := TWR-LS1021A
  DEVICE_VARIANT := Default
  DEVICE_PACKAGES += layerscape-rcw
-  DEVICE_DTS := ls1021a-twr
  IMAGE/firmware.bin := \
    ls-clean | \
    ls-append $(1)-rcw.bin | pad-to 1M | \
@ -33,11 +34,10 @@ define Device/ls1021atwr
    ls-append-dtb $$(DEVICE_DTS) | pad-to 16M | \
    append-kernel | pad-to 32M | \
    append-rootfs | pad-rootfs | check-size
-  SUPPORTED_DEVICES := fsl,ls1021a-twr
 endef
-TARGET_DEVICES += ls1021atwr
+TARGET_DEVICES += fsl_ls1021a-twr

-define Device/ls1021atwr-sdboot
+define Device/fsl_ls1021a-twr-sdboot
  DEVICE_VENDOR := NXP
  DEVICE_MODEL := TWR-LS1021A
  DEVICE_VARIANT := SD Card Boot
@ -57,16 +57,16 @@ define Device/ls1021atwr-sdboot
    ls-append-sdhead $(1) | pad-to 16M | \
    append-kernel | pad-to $(LS_SD_ROOTFSPART_OFFSET)M | \
    append-rootfs | check-size $(LS_SD_IMAGE_SIZE) | append-metadata
-  SUPPORTED_DEVICES := fsl,ls1021a-twr-sdboot
 endef
-TARGET_DEVICES += ls1021atwr-sdboot
+TARGET_DEVICES += fsl_ls1021a-twr-sdboot

-define Device/ls1021aiot-sdboot
+define Device/fsl_ls1021a-iot-sdboot
  DEVICE_VENDOR := NXP
  DEVICE_MODEL := LS1021A-IoT
  DEVICE_VARIANT := SD Card Boot
  DEVICE_DTS := ls1021a-iot
  FILESYSTEMS := ext4
+  SUPPORTED_DEVICES :=
  IMAGES := sdcard.img
  IMAGE/sdcard.img := \
    ls-clean | \
@ -77,4 +77,4 @@ define Device/ls1021aiot-sdboot
    append-kernel | pad-to $(LS_SD_ROOTFSPART_OFFSET)M | \
    append-rootfs | check-size $(LS_SD_IMAGE_SIZE)
 endef
-TARGET_DEVICES += ls1021aiot-sdboot
+TARGET_DEVICES += fsl_ls1021a-iot-sdboot
--- a/target/linux/layerscape/image/armv8_64b.mk
+++ b/target/linux/layerscape/image/armv8_64b.mk
@ -12,20 +12,21 @@ define Device/Default
  KERNEL := kernel-bin | gzip | uImage gzip
  KERNEL_LOADADDR := 0x80080000
  KERNEL_ENTRY_POINT := 0x80080000
+  DEVICE_DTS = freescale/$(subst _,-,$(1))
+  SUPPORTED_DEVICES = $(subst _,$(comma),$(1))
  IMAGE_SIZE := 64m
  IMAGE/sysupgrade.bin := append-kernel | pad-to 16M | \
    append-rootfs | pad-rootfs | \
    check-size $(LS_SYSUPGRADE_IMAGE_SIZE) | append-metadata
 endef

-define Device/ls1012afrdm
+define Device/fsl_ls1012a-frdm
  DEVICE_VENDOR := NXP
  DEVICE_MODEL := FRDM-LS1012A
  DEVICE_PACKAGES += \
    layerscape-ppfe \
-    tfa-ls1012afrdm \
+    tfa-ls1012a-frdm \
    kmod-ppfe
-  DEVICE_DTS := freescale/fsl-ls1012a-frdm
  BLOCKSIZE := 256KiB
  IMAGE/firmware.bin := \
    ls-clean | \
@ -41,18 +42,16 @@ define Device/ls1012afrdm
    check-size $(LS_SYSUPGRADE_IMAGE_SIZE) | append-metadata
  KERNEL := kernel-bin | gzip | fit gzip $$(DTS_DIR)/$$(DEVICE_DTS).dtb
  KERNEL_INITRAMFS := kernel-bin | fit none $$(DTS_DIR)/$$(DEVICE_DTS).dtb
-  SUPPORTED_DEVICES := fsl,ls1012a-frdm
 endef
-TARGET_DEVICES += ls1012afrdm
+TARGET_DEVICES += fsl_ls1012a-frdm

-define Device/ls1012ardb
+define Device/fsl_ls1012a-rdb
  DEVICE_VENDOR := NXP
  DEVICE_MODEL := LS1012A-RDB
  DEVICE_PACKAGES += \
    layerscape-ppfe \
-    tfa-ls1012ardb \
+    tfa-ls1012a-rdb \
    kmod-ppfe
-  DEVICE_DTS := freescale/fsl-ls1012a-rdb
  IMAGE/firmware.bin := \
    ls-clean | \
    ls-append $(1)-bl2.pbl | pad-to 1M | \
@ -62,16 +61,15 @@ define Device/ls1012ardb
    ls-append-dtb $$(DEVICE_DTS) | pad-to 16M | \
    append-kernel | pad-to 32M | \
    append-rootfs | pad-rootfs | check-size
-  SUPPORTED_DEVICES := fsl,ls1012a-rdb
 endef
-TARGET_DEVICES += ls1012ardb
+TARGET_DEVICES += fsl_ls1012a-rdb

-define Device/ls1012afrwy
+define Device/fsl_ls1012a-frwy-sdboot
  DEVICE_VENDOR := NXP
  DEVICE_MODEL := FRWY-LS1012A
  DEVICE_PACKAGES += \
    layerscape-ppfe \
-    tfa-ls1012afrwy \
+    tfa-ls1012a-frwy-sdboot \
    kmod-ppfe
  DEVICE_DTS := freescale/fsl-ls1012a-frwy
  FILESYSTEMS := ext4
@ -94,17 +92,16 @@ define Device/ls1012afrwy
    ls-append-sdhead $(1) | pad-to 16M | \
    append-kernel | pad-to $(LS_SD_ROOTFSPART_OFFSET)M | \
    append-rootfs | check-size $(LS_SD_IMAGE_SIZE) | append-metadata
-  SUPPORTED_DEVICES := fsl,ls1012a-frwy-sdboot
 endef
-TARGET_DEVICES += ls1012afrwy
+TARGET_DEVICES += fsl_ls1012a-frwy-sdboot

-define Device/ls1043ardb
+define Device/fsl_ls1043a-rdb
  DEVICE_VENDOR := NXP
  DEVICE_MODEL := LS1043A-RDB
  DEVICE_VARIANT := Default
  DEVICE_PACKAGES += \
    layerscape-fman \
-    tfa-ls1043ardb \
+    tfa-ls1043a-rdb \
    fmc fmc-eth-config
  DEVICE_DTS := freescale/fsl-ls1043a-rdb-sdk
  IMAGE/firmware.bin := \
@ -116,17 +113,16 @@ define Device/ls1043ardb
    ls-append-dtb $$(DEVICE_DTS) | pad-to 16M | \
    append-kernel | pad-to 32M | \
    append-rootfs | pad-rootfs | check-size
-  SUPPORTED_DEVICES := fsl,ls1043a-rdb
 endef
-TARGET_DEVICES += ls1043ardb
+TARGET_DEVICES += fsl_ls1043a-rdb

-define Device/ls1043ardb-sdboot
+define Device/fsl_ls1043a-rdb-sdboot
  DEVICE_VENDOR := NXP
  DEVICE_MODEL := LS1043A-RDB
  DEVICE_VARIANT := SD Card Boot
  DEVICE_PACKAGES += \
    layerscape-fman \
-    tfa-ls1043ardb-sdboot \
+    tfa-ls1043a-rdb-sdboot \
    fmc fmc-eth-config
  DEVICE_DTS := freescale/fsl-ls1043a-rdb-sdk
  FILESYSTEMS := ext4
@ -137,7 +133,7 @@ define Device/ls1043ardb-sdboot
    ls-append $(1)-bl2.pbl | pad-to 1M | \
    ls-append $(1)-fip.bin | pad-to 5M | \
    ls-append $(1)-uboot-env.bin | pad-to 9M | \
-    ls-append ls1043ardb-fman.bin | pad-to 15M | \
+    ls-append fsl_ls1043a-rdb-fman.bin | pad-to 15M | \
    ls-append-dtb $$(DEVICE_DTS) | pad-to 16M | \
    append-kernel | pad-to $(LS_SD_ROOTFSPART_OFFSET)M | \
    append-rootfs | check-size $(LS_SD_IMAGE_SIZE)
@ -146,17 +142,16 @@ define Device/ls1043ardb-sdboot
    ls-append-sdhead $(1) | pad-to 16M | \
    append-kernel | pad-to $(LS_SD_ROOTFSPART_OFFSET)M | \
    append-rootfs | check-size $(LS_SD_IMAGE_SIZE) | append-metadata
-  SUPPORTED_DEVICES := fsl,ls1043a-rdb-sdboot
 endef
-TARGET_DEVICES += ls1043ardb-sdboot
+TARGET_DEVICES += fsl_ls1043a-rdb-sdboot

-define Device/ls1046ardb
+define Device/fsl_ls1046a-rdb
  DEVICE_VENDOR := NXP
  DEVICE_MODEL := LS1046A-RDB
  DEVICE_VARIANT := Default
  DEVICE_PACKAGES += \
    layerscape-fman \
-    tfa-ls1046ardb \
+    tfa-ls1046a-rdb \
    fmc fmc-eth-config
  DEVICE_DTS := freescale/fsl-ls1046a-rdb-sdk
  IMAGE/firmware.bin := \
@ -168,17 +163,16 @@ define Device/ls1046ardb
    ls-append-dtb $$(DEVICE_DTS) | pad-to 16M | \
    append-kernel | pad-to 32M | \
    append-rootfs | pad-rootfs | check-size
-  SUPPORTED_DEVICES := fsl,ls1046a-rdb
 endef
-TARGET_DEVICES += ls1046ardb
+TARGET_DEVICES += fsl_ls1046a-rdb

-define Device/ls1046ardb-sdboot
+define Device/fsl_ls1046a-rdb-sdboot
  DEVICE_VENDOR := NXP
  DEVICE_MODEL := LS1046A-RDB
  DEVICE_VARIANT := SD Card Boot
  DEVICE_PACKAGES += \
    layerscape-fman \
-    tfa-ls1046ardb-sdboot \
+    tfa-ls1046a-rdb-sdboot \
    fmc fmc-eth-config
  DEVICE_DTS := freescale/fsl-ls1046a-rdb-sdk
  FILESYSTEMS := ext4
@ -189,7 +183,7 @@ define Device/ls1046ardb-sdboot
    ls-append $(1)-bl2.pbl | pad-to 1M | \
    ls-append $(1)-fip.bin | pad-to 5M | \
    ls-append $(1)-uboot-env.bin | pad-to 9M | \
-    ls-append ls1046ardb-fman.bin | pad-to 15M | \
+    ls-append fsl_ls1046a-rdb-fman.bin | pad-to 15M | \
    ls-append-dtb $$(DEVICE_DTS) | pad-to 16M | \
    append-kernel | pad-to $(LS_SD_ROOTFSPART_OFFSET)M | \
    append-rootfs | check-size $(LS_SD_IMAGE_SIZE)
@ -198,20 +192,18 @@ define Device/ls1046ardb-sdboot
    ls-append-sdhead $(1) | pad-to 16M | \
    append-kernel | pad-to $(LS_SD_ROOTFSPART_OFFSET)M | \
    append-rootfs | check-size $(LS_SD_IMAGE_SIZE) | append-metadata
-  SUPPORTED_DEVICES := fsl,ls1046a-rdb-sdboot
 endef
-TARGET_DEVICES += ls1046ardb-sdboot
+TARGET_DEVICES += fsl_ls1046a-rdb-sdboot

-define Device/ls1088ardb
+define Device/fsl_ls1088a-rdb
  DEVICE_VENDOR := NXP
  DEVICE_MODEL := LS1088A-RDB
  DEVICE_VARIANT := Default
  DEVICE_PACKAGES += \
    layerscape-mc \
    layerscape-dpl \
-    tfa-ls1088ardb \
+    tfa-ls1088a-rdb \
    restool
-  DEVICE_DTS := freescale/fsl-ls1088a-rdb
  IMAGE/firmware.bin := \
    ls-clean | \
    ls-append $(1)-bl2.pbl | pad-to 1M | \
@ -223,18 +215,17 @@ define Device/ls1088ardb
    ls-append-dtb $$(DEVICE_DTS) | pad-to 16M | \
    append-kernel | pad-to 32M | \
    append-rootfs | pad-rootfs | check-size
-  SUPPORTED_DEVICES := fsl,ls1088a-rdb
 endef
-TARGET_DEVICES += ls1088ardb
+TARGET_DEVICES += fsl_ls1088a-rdb

-define Device/ls1088ardb-sdboot
+define Device/fsl_ls1088a-rdb-sdboot
  DEVICE_VENDOR := NXP
  DEVICE_MODEL := LS1088A-RDB
  DEVICE_VARIANT := SD Card Boot
  DEVICE_PACKAGES += \
    layerscape-mc \
    layerscape-dpl \
-    tfa-ls1088ardb-sdboot \
+    tfa-ls1088a-rdb-sdboot \
    restool
  DEVICE_DTS := freescale/fsl-ls1088a-rdb
  FILESYSTEMS := ext4
@ -245,9 +236,9 @@ define Device/ls1088ardb-sdboot
    ls-append $(1)-bl2.pbl | pad-to 1M | \
    ls-append $(1)-fip.bin | pad-to 5M | \
    ls-append $(1)-uboot-env.bin | pad-to 10M | \
-    ls-append ls1088ardb-mc.itb | pad-to 13M | \
-    ls-append ls1088ardb-dpl.dtb | pad-to 14M | \
-    ls-append ls1088ardb-dpc.dtb | pad-to 15M | \
+    ls-append fsl_ls1088a-rdb-mc.itb | pad-to 13M | \
+    ls-append fsl_ls1088a-rdb-dpl.dtb | pad-to 14M | \
+    ls-append fsl_ls1088a-rdb-dpc.dtb | pad-to 15M | \
    ls-append-dtb $$(DEVICE_DTS) | pad-to 16M | \
    append-kernel | pad-to $(LS_SD_ROOTFSPART_OFFSET)M | \
    append-rootfs | check-size $(LS_SD_IMAGE_SIZE)
@ -256,19 +247,17 @@ define Device/ls1088ardb-sdboot
    ls-append-sdhead $(1) | pad-to 16M | \
    append-kernel | pad-to $(LS_SD_ROOTFSPART_OFFSET)M | \
    append-rootfs | check-size $(LS_SD_IMAGE_SIZE) | append-metadata
-  SUPPORTED_DEVICES := fsl,ls1088a-rdb-sdboot
 endef
-TARGET_DEVICES += ls1088ardb-sdboot
+TARGET_DEVICES += fsl_ls1088a-rdb-sdboot

-define Device/ls2088ardb
+define Device/fsl_ls2088a-rdb
  DEVICE_VENDOR := NXP
  DEVICE_MODEL := LS2088ARDB
  DEVICE_PACKAGES += \
    layerscape-mc \
    layerscape-dpl \
-    tfa-ls2088ardb \
+    tfa-ls2088a-rdb \
    restool
-  DEVICE_DTS := freescale/fsl-ls2088a-rdb
  IMAGE/firmware.bin := \
    ls-clean | \
    ls-append $(1)-bl2.pbl | pad-to 1M | \
@ -280,11 +269,10 @@ define Device/ls2088ardb
    ls-append-dtb $$(DEVICE_DTS) | pad-to 16M | \
    append-kernel | pad-to 32M | \
    append-rootfs | pad-rootfs | check-size
-  SUPPORTED_DEVICES := fsl,ls2088a-rdb
 endef
-TARGET_DEVICES += ls2088ardb
+TARGET_DEVICES += fsl_ls2088a-rdb

-define Device/traverse-ls1043
+define Device/traverse_ls1043
  DEVICE_VENDOR := Traverse
  DEVICE_MODEL := LS1043 Boards
  KERNEL_NAME := Image
@ -314,4 +302,4 @@ define Device/traverse-ls1043
  MKUBIFS_OPTS := -m 2048 -e 124KiB -c 4096
  SUPPORTED_DEVICES := traverse,ls1043s traverse,ls1043v
 endef
-TARGET_DEVICES += traverse-ls1043
+TARGET_DEVICES += traverse_ls1043
--- a/target/linux/mediatek/image/Config.in
+++ b/target/linux/mediatek/image/Config.in
@ -1,4 +1,4 @@
-config BANANA_PI_BOOT_PARTSIZE
-       int "Boot (SD Card) filesystem partition size (in MiB)"
-       depends on TARGET_mediatek_mt7623_DEVICE_bpi_bananapi-r2 || TARGET_DEVICE_mediatek_mt7623_DEVICE_bpi_bananapi-r2
+config MTK_BOOT_PARTSIZE
+       int "Boot (SD Card/eMMC) filesystem partition size (in MiB)"
+       depends on TARGET_mediatek_mt7623_DEVICE_bpi_bananapi-r2 || TARGET_DEVICE_mediatek_mt7623_DEVICE_bpi_bananapi-r2 || TARGET_mediatek_mt7623_DEVICE_unielec_u7623-emmc || TARGET_DEVICE_mediatek_mt7623_DEVICE_unielec_u7623-emmc
       default 32
--- a/target/linux/mediatek/image/Makefile
+++ b/target/linux/mediatek/image/Makefile
@ -21,21 +21,17 @@ endef
 # default all platform image(fit) build 
 define Device/Default
  PROFILES = Default $$(DEVICE_NAME)
-  KERNEL_NAME := zImage
+  KERNEL_NAME := Image
+  KERNEL = kernel-bin | lzma | \
+	fit lzma $$(KDIR)/image-$$(firstword $$(DEVICE_DTS)).dtb
+  KERNEL_INITRAMFS = kernel-bin | lzma | \
+	fit lzma $$(KDIR)/image-$$(firstword $$(DEVICE_DTS)).dtb
  FILESYSTEMS := squashfs
  DEVICE_DTS_DIR := $(DTS_DIR)
  IMAGES := sysupgrade.bin
-  IMAGE/sysupgrade.bin := append-kernel | pad-to 128k | append-rootfs | pad-rootfs | append-metadata
+  IMAGE/sysupgrade.bin := append-kernel | pad-to 128k | append-rootfs | \
+	pad-rootfs | append-metadata
  SUPPORTED_DEVICES := $(subst _,$(comma),$(1))
-ifeq ($(SUBTARGET),mt7623)
-  KERNEL_NAME := zImage
-  KERNEL := kernel-bin | append-dtb | uImage none
-  KERNEL_INITRAMFS := kernel-bin | append-dtb | uImage none
-else
-  KERNEL_NAME := Image
-  KERNEL = kernel-bin | lzma | fit lzma $$(KDIR)/image-$$(firstword $$(DEVICE_DTS)).dtb
-  KERNEL_INITRAMFS = kernel-bin | lzma | fit lzma $$(KDIR)/image-$$(firstword $$(DEVICE_DTS)).dtb
-endif
 endef

 include $(SUBTARGET).mk
--- a/target/linux/mediatek/image/gen_mt7623_emmc_img.sh
+++ b/target/linux/mediatek/image/gen_mt7623_emmc_img.sh
@ -1,5 +1,8 @@
 #!/bin/sh
-
+#
+# This script is used only to create the "legacy" image for UniElec U7623,
+# suitable for upgrading from the vendor OpenWrt or from OpenWrt 19.07.
+#
 OUTPUT_FILE=$1
 KERNEL_FILE=$2
 RECOVERY_FILE=$3
@ -7,10 +10,19 @@ ROOTFS_FILE=$4

 BS=512

-#These to offsets are relative to the absolute location of the kernel on the mmc
-#(0xA00), so their position in the image is -2560 blocks
-RECOVERY_OFFSET=67072
-ROOTFS_OFFSET=87552
+# These two offsets are relative to the absolute location of the kernel on the mmc
+# (0xA00), so their position in the image is -2560 blocks
+#
+# They must be kept in sync with the default command line for U7623.
+# blkdevparts=mmcblk0:3M@6M(recovery),256M@9M(root)"
+#
+# For upgrading from the vendor firmware, the total image must fit in its
+# MTD 'firmware' partition, which is typically 36MiB.
+
+# In the legacy image, the uImage starts at block 0xa00. Allow 4864 KiB (9728) blocks.
+RECOVERY_OFFSET=9728
+# The recovery image is 3MiB, or 6144 blocks.
+ROOTFS_OFFSET=15872

 dd bs="$BS" of="$OUTPUT_FILE" if="$KERNEL_FILE"
 dd bs="$BS" of="$OUTPUT_FILE" if="$RECOVERY_FILE" seek="$RECOVERY_OFFSET"
--- a/target/linux/mediatek/image/gen_banana_pi_img.sh
+++ b/target/linux/mediatek/image/gen_banana_pi_img.sh
@ -27,7 +27,7 @@
 # The second partition is a FAT file system containing the kernel
 # image and a uboot.env file, which is provided to this script as
 # $4 (bootfs image). Its size is configurable with the
-# CONFIG_BANANA_PI_BOOT_PARTSIZE option; by default 32MiB.
+# CONFIG_MTK_BOOT_PARTSIZE option; by default 32MiB.
 #
 # The root filesystem comes next in the third partition.
 #
@ -56,7 +56,7 @@
 #   |----------------------|
 #   |   MBR partition #2   |
 #   |                      |
-#   |    FAT partition     |   ( BANANA_PI_BOOT_PARTSIZE
+#   |    FAT partition     |   ( MTK_BOOT_PARTSIZE
 #   .                      .     default 32MiB )
 #   .    (kernel, uEnv)    .
 #   |                      |
@ -79,7 +79,7 @@
 # with the preloader loading 512KiB of U-Boot starting at 0x50000.

 usage() {
-    echo "SYNTAX: $0 sd <file> <preloader image> <u-boot image> <bootfs image> <rootfs image> <bootfs size> <rootfs size>"
+    echo "SYNTAX: $0 sd <file> <preloader image> <u-boot image> <u-boot offset> <bootfs image> <rootfs image> <bootfs size> <rootfs size>"
    echo " OR:    $0 emmc <file> <preloader image>"
    exit 1
 }
@ -96,20 +96,21 @@ BRLYT="BRLYT\x00\x00\x00\x01\x00\x00\x00\x00\x08\x00\x00\

 case $1 in
 sd)
-	[ $# -eq 8 ] || usage
+	[ $# -eq 9 ] || usage
 	OUTPUT="$2"
 	PRELOADER="$3"
 	UBOOT="$4"
-	BOOTFS="$5"
-	ROOTFS="$6"
-	BOOTFSSIZE="$7"
-	ROOTFSSIZE="$8"
+	UBOOTOFS="$5"
+	BOOTFS="$6"
+	ROOTFS="$7"
+	BOOTFSSIZE="$8"
+	ROOTFSSIZE="$9"

 	head=4
 	sect=63

 	set $(ptgen -o $OUTPUT -h $head -s $sect -a 0 -l 1024 \
-		    -t 41 -p 512k@320k \
+		    -t 41 -p 512k@${UBOOTOFS} \
 		    -t c -p ${BOOTFSSIZE}M \
 		    -t 83 -p ${ROOTFSSIZE}M )

@ -123,7 +124,11 @@ case $1 in
 	echo -en "${SDMMC_BOOT}" | dd bs=1 of="${OUTPUT}" seek=0   conv=notrunc
 	echo -en "${BRLYT}"      | dd bs=1 of="${OUTPUT}" seek=512 conv=notrunc

-	dd bs=1024 if="${PRELOADER}" of="${OUTPUT}" seek="${PRELOADER_OFFSET}" conv=notrunc
+	# For eMMC-only boards like U7623 the preloader doesn't need to be included in the
+	# main image as it's only ever needed in the eMMC boot partition.
+	if [ -r ${PRELOADER} ]; then
+	    dd bs=1024 if="${PRELOADER}" of="${OUTPUT}" seek="${PRELOADER_OFFSET}" conv=notrunc
+	fi
 	dd bs=512  if="${UBOOT}"     of="${OUTPUT}" seek="${UBOOT_OFFSET}"     conv=notrunc
 	dd bs=512  if="${BOOTFS}"    of="${OUTPUT}" seek="${BOOTFS_OFFSET}"    conv=notrunc
 	dd bs=512  if="${ROOTFS}"    of="${OUTPUT}" seek="${ROOTFS_OFFSET}"    conv=notrunc
--- a/target/linux/mediatek/image/gen_scatterfile.sh
+++ b/target/linux/mediatek/image/gen_scatterfile.sh
@ -0,0 +1,75 @@
+#!/bin/sh
+#
+# Copyright © 2020 David Woodhouse <dwmw2@infradead.org>
+#
+# This is free software, licensed under the GNU General Public License v2.
+# See /LICENSE for more information.
+#
+# Generate as "scatter file" for use with the MediaTek SP Flash tool for
+# writing images to MediaTek boards. This can be used to write images
+# even on a bricked board which has no preloader installed, or broken
+# U-Boot.
+#
+# NOTE: At the time of writing (2020-07-20), the Linux tool linked from
+# the front page of https://spflashtool.com/ is out of date and does not
+# support MT7623. The newer v5.1916 found on the download page at
+# https://spflashtool.com/download/ has been tested on UniElec U7623 and
+# Banana Pi R2 from Linux, and does work.
+#
+
+SOC=$1
+IMAGE=${2%.gz}
+PROJECT=${3%-scatter.txt}
+DEVICENAME="$4"
+
+cat <<EOF
+# OpenWrt eMMC scatter file for ${DEVICENAME}
+# For use with SP Flash Tool: https://spflashtool.com/download/
+#
+# Unzip the file system file ${PROJECT}-${IMAGE}.gz before flashing.
+# Connect the device's USB port, although it won't appear to the host yet.
+# Load this scatter file into the SP Flash Tool, select 'Format All + Download'
+# After pressing the 'Download' button, power on the board.
+# The /dev/ttyACM0 device should appear on USB and the tool should find it.
+
+- general: MTK_PLATFORM_CFG
+  info:
+    - config_version: V1.1.2
+      platform: ${SOC}
+      project: ${PROJECT}
+      storage: EMMC
+      boot_channel: MSDC_0
+      block_size: 0x20000
+
+- partition_index: SYS0
+  partition_name: PRELOADER
+  file_name: ${PROJECT}-preloader.bin
+  is_download: true
+  type: SV5_BL_BIN
+  linear_start_addr: 0x0
+  physical_start_addr: 0x0
+  partition_size: 0x40000
+  region: EMMC_BOOT_1
+  storage: HW_STORAGE_EMMC
+  boundary_check: true
+  is_reserved: false
+  operation_type: BOOTLOADERS
+  d_type: FALSE
+  reserve: 0x00
+
+- partition_index: SYS1
+  partition_name: OPENWRT
+  file_name: ${PROJECT}-${IMAGE}
+  is_download: true
+  type: NORMAL_ROM
+  linear_start_addr: 0x00000
+  physical_start_addr: 0x00000
+  partition_size: 0x4000000
+  region: EMMC_USER
+  storage: HW_STORAGE_EMMC
+  boundary_check: true
+  is_reserved: false
+  operation_type: UPDATE
+  d_type: FALSE
+  reserve: 0x00
+EOF
--- a/target/linux/mediatek/image/mt7623.mk
+++ b/target/linux/mediatek/image/mt7623.mk
@ -1,53 +1,95 @@
 KERNEL_LOADADDR := 0x80008000
+DEVICE_VARS += UBOOT_TARGET UBOOT_OFFSET UBOOT_ENVSIZE

-ifneq ($(CONFIG_BANANA_PI_BOOT_PARTSIZE),)
+ifneq ($(CONFIG_MTK_BOOT_PARTSIZE),)
 BOOTFS_BLOCK_SIZE := 1024
-BOOTFS_BLOCKS := $(shell echo $$(($(CONFIG_BANANA_PI_BOOT_PARTSIZE)*1024*1024/$(BOOTFS_BLOCK_SIZE))))
+BOOTFS_BLOCKS := $(shell echo $$(($(CONFIG_MTK_BOOT_PARTSIZE)*1024*1024/$(BOOTFS_BLOCK_SIZE))))
 endif

-define Build/banana-pi-sdcard
+define Build/mtk-mmc-img
 	rm -f $@.boot
 	mkfs.fat -C $@.boot $(BOOTFS_BLOCKS)

-	./gen_banana_pi_img.sh emmc $@.emmc \
-		$(STAGING_DIR_IMAGE)/$(UBOOT_TARGET)-preloader.bin
-
-	mkenvimage -s 0x2000 -o $(STAGING_DIR_IMAGE)/$(UBOOT_TARGET)-uboot.env $(UBOOT_TARGET)-uEnv.txt
+	if [ -r $(STAGING_DIR_IMAGE)/$(UBOOT_TARGET)-preloader.bin ]; then \
+		./gen_mtk_mmc_img.sh emmc $@.emmc \
+			$(STAGING_DIR_IMAGE)/$(UBOOT_TARGET)-preloader.bin; \
+		mcopy -i $@.boot $@.emmc ::eMMCboot.bin; \
+	fi
+	mkenvimage -s $(UBOOT_ENVSIZE) -o $(STAGING_DIR_IMAGE)/$(UBOOT_TARGET)-uboot.env $(UBOOT_TARGET)-uEnv.txt
 	mcopy -i $@.boot $(STAGING_DIR_IMAGE)/$(UBOOT_TARGET)-uboot.env ::uboot.env
 	mcopy -i $@.boot $(IMAGE_KERNEL) ::uImage
-	mcopy -i $@.boot $@.emmc ::eMMCboot.bin
-	./gen_banana_pi_img.sh sd $@ \
+	./gen_mtk_mmc_img.sh sd $@ \
 		$(STAGING_DIR_IMAGE)/$(UBOOT_TARGET)-preloader.bin \
-		$(STAGING_DIR_IMAGE)/$(UBOOT_TARGET)-u-boot.bin \
+		$(STAGING_DIR_IMAGE)/$(UBOOT_TARGET)-u-boot*.bin \
+		$(UBOOT_OFFSET) \
 		$@.boot \
 		$(IMAGE_ROOTFS) \
-		$(CONFIG_BANANA_PI_BOOT_PARTSIZE) \
+		$(CONFIG_MTK_BOOT_PARTSIZE) \
 		$(CONFIG_TARGET_ROOTFS_PARTSIZE)
 endef

+define Build/preloader
+	$(CP) $(STAGING_DIR_IMAGE)/$1-preloader.bin $@
+endef
+
+define Build/scatterfile
+	./gen_scatterfile.sh $(subst mt,MT,$(SUBTARGET)) "$1" \
+		$(subst -scatter.txt,,$(notdir $@)) "$(DEVICE_TITLE)" > $@
+endef
+
 define Device/bpi_bananapi-r2
  DEVICE_VENDOR := Bpi
  DEVICE_MODEL := Banana Pi R2
  DEVICE_DTS := mt7623n-bananapi-bpi-r2
-  SUPPORTED_DEVICES := bananapi,bpi-r2
  DEVICE_PACKAGES := kmod-fs-vfat kmod-nls-cp437 kmod-nls-iso8859-1 kmod-mmc \
 	mkf2fs e2fsprogs kmod-usb-ohci kmod-usb2 kmod-usb3 kmod-ata-ahci-mtk
+  UBOOT_ENVSIZE := 0x2000
+  UBOOT_OFFSET := 320k
  UBOOT_TARGET := mt7623n_bpir2
  IMAGES := img.gz
-  IMAGE/img.gz := banana-pi-sdcard | gzip | append-metadata
-  KERNEL := kernel-bin | fit none $$(DTS_DIR)/$$(DEVICE_DTS).dtb
-  KERNEL_INITRAMFS :=
+  IMAGE/img.gz := mtk-mmc-img | gzip | append-metadata
+  ARTIFACT/preloader.bin := preloader $$(UBOOT_TARGET)
+  ARTIFACT/scatter.txt := scatterfile $$(firstword $$(FILESYSTEMS))-$$(firstword $$(IMAGES))
+  ARTIFACTS = preloader.bin scatter.txt
+  SUPPORTED_DEVICES := bananapi,bpi-r2
 endef
 TARGET_DEVICES += bpi_bananapi-r2

-define Device/unielec_u7623-02-emmc-512m
+# Full eMMC image including U-Boot and partition table
+define Device/unielec_u7623-emmc
+  DEVICE_VENDOR := UniElec
+  DEVICE_MODEL := U7623
+  DEVICE_VARIANT := eMMC
+  # When we use FIT images, U-Boot will populate the /memory node with the correct
+  # memory size discovered from the preloader, so we don't need separate builds.
+  DEVICE_DTS := mt7623a-unielec-u7623-02-emmc-512m
+  SUPPORTED_DEVICES := unielec,u7623-02-emmc-512m
+  UBOOT_ENVSIZE := 0x1000
+  UBOOT_OFFSET := 256k
+  UBOOT_TARGET := mt7623a_unielec_u7623
+  IMAGES := img.gz
+  IMAGE/img.gz := mtk-mmc-img | gzip | append-metadata
+  DEVICE_PACKAGES := kmod-fs-vfat kmod-nls-cp437 kmod-nls-iso8859-1 kmod-mmc \
+       mkf2fs e2fsprogs kmod-usb-ohci kmod-usb2 kmod-usb3 kmod-ata-ahci-mtk
+  ARTIFACT/scatter.txt := scatterfile $$(firstword $$(FILESYSTEMS))-$$(firstword $$(IMAGES))
+  ARTIFACTS := scatter.txt
+endef
+TARGET_DEVICES += unielec_u7623-emmc
+
+# Legacy partial image for U7623
+# This preserves the vendor U-Boot and starts with a uImage at 0xA00
+define Device/unielec_u7623-02-emmc-512m-legacy
  DEVICE_VENDOR := UniElec
  DEVICE_MODEL := U7623-02
-  DEVICE_VARIANT := eMMC/512MB RAM
+  DEVICE_VARIANT := eMMC/512MiB RAM (legacy image)
  DEVICE_DTS := mt7623a-unielec-u7623-02-emmc-512m
-  IMAGES := sysupgrade-emmc.bin.gz
-  IMAGE/sysupgrade-emmc.bin.gz := sysupgrade-emmc | gzip | append-metadata
+  KERNEL_NAME := zImage
+  KERNEL := kernel-bin | append-dtb | uImage none
+  KERNEL_INITRAMFS := kernel-bin | append-dtb | uImage none
  DEVICE_PACKAGES := kmod-fs-vfat kmod-nls-cp437 kmod-nls-iso8859-1 kmod-mmc \
 	mkf2fs e2fsprogs kmod-usb-ohci kmod-usb2 kmod-usb3 kmod-ata-ahci-mtk
+  IMAGES := sysupgrade-emmc.bin.gz
+  IMAGE/sysupgrade-emmc.bin.gz := sysupgrade-emmc | gzip | append-metadata
+  SUPPORTED_DEVICES := unielec,u7623-02-emmc-512m
 endef
-TARGET_DEVICES += unielec_u7623-02-emmc-512m
+TARGET_DEVICES += unielec_u7623-02-emmc-512m-legacy
--- a/target/linux/mediatek/image/mt7623a_unielec_u7623-uEnv.txt
+++ b/target/linux/mediatek/image/mt7623a_unielec_u7623-uEnv.txt
@ -0,0 +1,20 @@
+# Boot menu for UniElec U7623
+# Copyright © 2020 David Woodhouse <dwmw2@infradead.org>
+
+kernel=uImage
+loadaddr=0x88000000
+dtaddr=0x83f00000
+fdt_high=0xafffffff
+
+console=ttyS0,115200
+bootopts=rootfstype=squashfs,ext4 rootwait
+
+# Create the command line (with appropriate root=) and boot the Linux FIT image.
+boot1=setenv bootargs "console=${console} root=${rootdev} ${bootopts}";printenv bootargs;\
+ fatload mmc ${partition} ${loadaddr} ${kernel}; bootm
+
+bootmenu_0=Boot from eMMC.=setenv partition 0:2;setenv rootdev /dev/mmcblk0p3;run boot1
+bootmenu_default=0
+
+bootdelay=0
+bootcmd=bootmenu
--- a/target/linux/mediatek/mt7623/base-files/lib/preinit/07_set_iface_mac
+++ b/target/linux/mediatek/mt7623/base-files/lib/preinit/07_set_iface_mac
@ -42,16 +42,22 @@ preinit_set_mac_address() {
 	local rootpart

 	case $(board_name) in
-	bananapi,bpi-r2)
+	bananapi,bpi-r2|\
+	unielec,u7623-02-emmc-512m)
 		rootpart=$(cat /proc/cmdline)
 		rootpart="${rootpart##*root=}"
-		rootpart="${rootpart%%p3 *}"
-		if [ "$rootpart" = "/dev/mmcblk0" -o "$rootpart" = "/dev/mmcblk1" ]; then
-			set_recovery_mac_address ${rootpart}p2
-		fi
-		;;
-	unielec,u7623-02-emmc-512m)
-		set_recovery_mac_address /dev/mmcblk0p1
+		rootpart="${rootpart%% *}"
+		case $rootpart in
+		/dev/mmcblk0p2) # Legacy U7623 image
+			set_recovery_mac_address /dev/mmcblk0p1
+			;;
+		/dev/mmcblk0p3) # U7623 or Banana Pi R2 eMMC
+			set_recovery_mac_address /dev/mmcblk0p2
+			;;
+		/dev/mmcblk1p3) # Banana Pi R2 SD
+			set_recovery_mac_address /dev/mmcblk1p2
+			;;
+		esac
 		;;
 	esac
 }
--- a/target/linux/mediatek/mt7623/base-files/lib/preinit/79_move_config
+++ b/target/linux/mediatek/mt7623/base-files/lib/preinit/79_move_config
@ -10,7 +10,11 @@ move_config() {
 		partnum=2
 		;;
 	unielec,u7623-02-emmc-512m)
-		partnum=1
+		if grep -q root=/dev/mmcblk0p2 /proc/cmdline; then
+			partnum=1;
+		else
+			partnum=2;
+		fi
 		;;
 	*)
 		return 1
--- a/target/linux/mediatek/mt7623/base-files/lib/upgrade/platform.sh
+++ b/target/linux/mediatek/mt7623/base-files/lib/upgrade/platform.sh
@ -1,92 +1,113 @@
+
+REQUIRE_IMAGE_METADATA=1
+
+# Full system upgrade including preloader for MediaTek SoCs on eMMC or SD
+mtk_mmc_full_upgrade() {
+	local diskdev partdev diff oldrecovery
+
+	if grep -q root=/dev/mmcblk0p2 /proc/cmdline; then
+	    oldrecovery=1
+	else
+	    oldrecovery=2
+	fi
+
+	export_bootdevice && export_partdevice diskdev 0 || {
+		echo "Unable to determine upgrade device"
+		return 1
+	}
+
+	#Keep the persistent random mac address (if it exists)
+	mkdir -p /tmp/recovery
+	export_partdevice recoverydev $oldrecovery
+	if mount -o rw,noatime "/dev/$recoverydev" -tvfat /tmp/recovery; then
+		[ -f "/tmp/recovery/mac_addr" ] && cp /tmp/recovery/mac_addr /tmp/
+		umount /tmp/recovery
+	fi
+	sync
+
+	if [ "$SAVE_PARTITIONS" = "1" ]; then
+		get_partitions "/dev/$diskdev" bootdisk
+
+		#extract the boot sector from the image
+		get_image "$@" | dd of=/tmp/image.bs count=1 bs=512b
+
+		get_partitions /tmp/image.bs image
+
+		#compare tables
+		diff="$(grep -F -x -v -f /tmp/partmap.bootdisk /tmp/partmap.image)"
+	else
+		diff=1
+	fi
+
+	if [ -n "$diff" ]; then
+		get_image "$@" | dd of="/dev/$diskdev" bs=4096 conv=fsync
+
+		# Separate removal and addition is necessary; otherwise, partition 1
+		# will be missing if it overlaps with the old partition 2
+		partx -d - "/dev/$diskdev"
+		partx -a - "/dev/$diskdev"
+	else
+		# iterate over each partition from the image and write it to the boot disk
+		while read part start size; do
+			part="$(($part - 2))"
+			if export_partdevice partdev $part; then
+				echo "Writing image to /dev/$partdev..."
+				get_image "$@" | dd of="/dev/$partdev" ibs="512" obs=1M skip="$start" count="$size" conv=fsync
+			else
+			    echo "Unable to find partition $part device, skipped."
+			fi
+		done < /tmp/partmap.image
+
+		#copy partition uuid
+		echo "Writing new UUID to /dev/$diskdev..."
+		get_image "$@" | dd of="/dev/$diskdev" bs=1 skip=440 count=4 seek=440 conv=fsync
+	fi
+
+	export_partdevice recoverydev 2
+	if mount -o rw,noatime "/dev/$recoverydev" -t vfat /tmp/recovery; then
+		[ -f "/tmp/mac_addr" ] && cp /tmp/mac_addr /tmp/recovery
+
+		if [ "$diskdev" = "mmcblk0" -a -r /tmp/recovery/eMMCboot.bin ]; then
+			echo 0 > /sys/block/mmcblk0boot0/force_ro
+			dd if=/tmp/recovery/eMMCboot.bin of=/dev/mmcblk0boot0 conv=fsync
+			sync
+			echo 1 > /sys/block/mmcblk0boot0/force_ro
+		fi
+		sync
+		umount /tmp/recovery
+	fi
+}
+
 platform_do_upgrade() {
 	local board=$(board_name)

 	case "$board" in
 	bananapi,bpi-r2)
-		local diskdev partdev diff
-
-		export_bootdevice && export_partdevice diskdev 0 || {
-			echo "Unable to determine upgrade device"
-			return 1
-		}
-
-		#Keep the persistent random mac address (if it exists)
-		mkdir -p /tmp/recovery
-		export_partdevice recoverydev 2
-		if mount -o rw,noatime "/dev/$recoverydev" -tvfat /tmp/recovery; then
-			[ -f "/tmp/recovery/mac_addr" ] && cp /tmp/recovery/mac_addr /tmp/
-			umount /tmp/recovery
-		fi
-		sync
-
-		if [ "$SAVE_PARTITIONS" = "1" ]; then
-			get_partitions "/dev/$diskdev" bootdisk
-
-			#extract the boot sector from the image
-			get_image "$@" | dd of=/tmp/image.bs count=1 bs=512b
-
-			get_partitions /tmp/image.bs image
-
-			#compare tables
-			diff="$(grep -F -x -v -f /tmp/partmap.bootdisk /tmp/partmap.image)"
-		else
-			diff=1
-		fi
-
-		if [ -n "$diff" ]; then
-			get_image "$@" | dd of="/dev/$diskdev" bs=4096 conv=fsync
-
-			# Separate removal and addtion is necessary; otherwise, partition 1
-			# will be missing if it overlaps with the old partition 2
-			partx -d - "/dev/$diskdev"
-			partx -a - "/dev/$diskdev"
-		else
-			#iterate over each partition from the image and write it to the boot disk
-			while read part start size; do
-				part="$(($part - 2))"
-				if export_partdevice partdev $part; then
-					echo "Writing image to /dev/$partdev..."
-					get_image "$@" | dd of="/dev/$partdev" ibs="512" obs=1M skip="$start" count="$size" conv=fsync
-				else
-				    echo "Unable to find partition $part device, skipped."
-				fi
-			done < /tmp/partmap.image
-
-			#copy partition uuid
-			echo "Writing new UUID to /dev/$diskdev..."
-			get_image "$@" | dd of="/dev/$diskdev" bs=1 skip=440 count=4 seek=440 conv=fsync
-		fi
-
-		if mount -o rw,noatime "/dev/$recoverydev" -t vfat /tmp/recovery; then
-			[ -f "/tmp/mac_addr" ] && cp /tmp/mac_addr /tmp/recovery
-
-			if [ "$diskdev" = "mmcblk0" -a -r /tmp/recovery/eMMCboot.bin ]; then
-				echo 0 > /sys/block/mmcblk0boot0/force_ro
-				dd if=/tmp/recovery/eMMCboot.bin of=/dev/mmcblk0boot0 conv=fsync
-				sync
-				echo 1 > /sys/block/mmcblk0boot0/force_ro
-			fi
-			sync
-			umount /tmp/recovery
-		fi
+		mtk_mmc_full_upgrade "$1"
 		;;

 	unielec,u7623-02-emmc-512m)
-		#Keep the persisten random mac address (if it exists)
-		mkdir -p /tmp/recovery
-		mount -o rw,noatime /dev/mmcblk0p1 /tmp/recovery
-		[ -f "/tmp/recovery/mac_addr" ] && \
-			mv -f /tmp/recovery/mac_addr /tmp/
-		umount /tmp/recovery
+		local magic="$(get_magic_long "$1")"
+		if [ "$magic" = "53444d4d" ]; then
+			mtk_mmc_full_upgrade "$1"
+		else # Old partial image starting with uImage
+			# Keep the persistent random mac address (if it exists)
+			recoverydev=mmcblk0p1
+			mkdir -p /tmp/recovery
+			mount -o rw,noatime /dev/$recoverydev /tmp/recovery
+			[ -f "/tmp/recovery/mac_addr" ] && \
+				mv -f /tmp/recovery/mac_addr /tmp/
+			umount /tmp/recovery

-		#1310720 is the offset in bytes from the start of eMMC and to
-		#the location of the kernel (2560 512 byte sectors)
-		get_image "$1" | dd of=/dev/mmcblk0 bs=1310720 seek=1 conv=fsync
+			# 1310720 is the offset in bytes from the start of eMMC and to
+			# the location of the kernel (2560 512 byte sectors)
+			get_image "$1" | dd of=/dev/mmcblk0 bs=1310720 seek=1 conv=fsync

-		mount -o rw,noatime /dev/mmcblk0p1 /tmp/recovery
-		[ -f "/tmp/mac_addr" ] && mv -f /tmp/mac_addr /tmp/recovery
-		sync
-		umount /tmp/recovery
+			mount -o rw,noatime /dev/$recoverydev /tmp/recovery
+			[ -f "/tmp/mac_addr" ] && mv -f /tmp/mac_addr /tmp/recovery
+			sync
+			umount /tmp/recovery
+		fi
 		;;
 	*)
 		default_do_upgrade "$1"
@ -133,10 +154,21 @@ platform_check_image() {
 		fi
 		;;
 	unielec,u7623-02-emmc-512m)
+		# Can always upgrade to the new-style full image
+		[ "$magic" = "53444d4d" ] && return 0
+
+		# Legacy uImage directly at 0xA00 on the eMMC.
 		[ "$magic" != "27051956" ] && {
 			echo "Invalid image type."
 			return 1
 		}
+		rootpart=$(cat /proc/cmdline)
+		rootpart="${rootpart##*root=}"
+		rootpart="${rootpart%% *}"
+		[ "$rootpart" != "/dev/mmcblk0p2" ] && {
+			echo "Cannot downgrade to legacy image."
+			return 1
+		}
 		return 0
 		;;
 	*)
@ -148,25 +180,18 @@ platform_check_image() {
 	return 0
 }

-platform_copy_config_emmc() {
-	local partdev
-
-	if export_bootdevice && export_partdevice partdev $1; then
-		mkdir -p /recovery
-		mount -o rw,noatime "/dev/$partdev" -t vfat /recovery
-		cp -af "$UPGRADE_BACKUP" "/recovery/$BACKUP_FILE"
-		sync
-		umount /recovery
-	fi
-}
-
 platform_copy_config() {
 	case "$(board_name)" in
-	bananapi,bpi-r2)
-		platform_copy_config_emmc 2
-		;;
+	bananapi,bpi-r2|\
 	unielec,u7623-02-emmc-512m)
-		platform_copy_config_emmc 1
+		# platform_do_upgrade() will have set $recoverydev
+		if [ -n "$recoverydev" ]; then
+			mkdir -p /tmp/recovery
+			mount -o rw,noatime "/dev/$recoverydev" -t vfat /tmp/recovery
+			cp -af "$UPGRADE_BACKUP" "/tmp/recovery/$BACKUP_FILE"
+			sync
+			umount /tmp/recovery
+		fi
 		;;
 	esac
 }
--- a/target/linux/mediatek/mt7623/config-5.4
+++ b/target/linux/mediatek/mt7623/config-5.4
@ -70,6 +70,7 @@ CONFIG_CLKSRC_MMIO=y
 CONFIG_CLONE_BACKWARDS=y
 CONFIG_CMDLINE="earlyprintk console=ttyS0,115200 rootfstype=squashfs,jffs2"
 CONFIG_CMDLINE_FROM_BOOTLOADER=y
+CONFIG_CMDLINE_PARTITION=y
 CONFIG_COMMON_CLK=y
 CONFIG_COMMON_CLK_MEDIATEK=y
 CONFIG_COMMON_CLK_MT2701=y
--- a/target/linux/mediatek/patches-5.4/0227-arm-dts-Add-Unielec-U7623-DTS.patch
+++ b/target/linux/mediatek/patches-5.4/0227-arm-dts-Add-Unielec-U7623-DTS.patch
@ -44,7 +44,7 @@ Subject: [PATCH] arm: dts: Add Unielec U7623 DTS
 +};
 --- /dev/null
 +++ b/arch/arm/boot/dts/mt7623a-unielec-u7623-02-emmc.dtsi
-@@ -0,0 +1,349 @@
+@@ -0,0 +1,343 @@
 +/*
 + * Copyright 2018 Kristian Evensen <kristian.evensen@gmail.com>
 + *
@ -63,7 +63,7 @@ Subject: [PATCH] arm: dts: Add Unielec U7623 DTS
 +	};
 +
 +	chosen {
-+		bootargs = "root=/dev/mmcblk0p2 rootfstype=squashfs,f2fs";
+		bootargs = "root=/dev/mmcblk0p2 rootfstype=squashfs,f2fs console=ttyS0,115200 blkdevparts=mmcblk0:3M@6M(recovery),256M@9M(root)";
 +		stdout-path = "serial2:115200n8";
 +	};
 +
@ -141,12 +141,6 @@ Subject: [PATCH] arm: dts: Add Unielec U7623 DTS
 +			default-state = "off";
 +		};
 +	};
-+
-+	mt7530: switch@0 {
-+		compatible = "mediatek,mt7530";
-+		#address-cells = <1>;
-+		#size-cells = <0>;
-+	};
 +};
 +
 +&crypto {
@ -171,9 +165,9 @@ Subject: [PATCH] arm: dts: Add Unielec U7623 DTS
 +	mdio: mdio-bus {
 +		#address-cells = <1>;
 +		#size-cells = <0>;
-+		phy5: ethernet-phy@5 {
-+			reg = <5>;
-+			phy-mode = "rgmii-rxid";
+
+		mt7530: switch@0 {
+			compatible = "mediatek,mt7530";
 +		};
 +	};
 +};
--- a/target/linux/mediatek/patches-5.4/0402-net-ethernet-mtk_eth_soc-Always-call-mtk_gmac0_rgmii.patch
+++ b/target/linux/mediatek/patches-5.4/0402-net-ethernet-mtk_eth_soc-Always-call-mtk_gmac0_rgmii.patch
@ -0,0 +1,62 @@
+In-Reply-To: <trinity-fb0cdf15-dfcf-4d60-9144-87d8fbfad5ba-1586179542451@3c-app-gmx-bap62>
+References: <trinity-fb0cdf15-dfcf-4d60-9144-87d8fbfad5ba-1586179542451@3c-app-gmx-bap62>
+Subject: [PATCH] net: ethernet: mtk_eth_soc: Always call mtk_gmac0_rgmii_adjust() for mt7623
+MIME-Version: 1.0
+Content-Type: text/plain; charset=UTF-8
+Content-Transfer-Encoding: 8bit
+
+From: René van Dorst <opensource@vdorst.com>
+
+Modify mtk_gmac0_rgmii_adjust() so it can always be called.
+mtk_gmac0_rgmii_adjust() sets-up the TRGMII clocks.
+
+Signed-off-by: René van Dorst <opensource@vdorst.com>
+Signed-off-By: David Woodhouse <dwmw2@infradead.org>
+---
+ drivers/net/ethernet/mediatek/mtk_eth_soc.c | 19 ++++++++++++++-----
+ 1 file changed, 14 insertions(+), 5 deletions(-)
+
+diff --git a/drivers/net/ethernet/mediatek/mtk_eth_soc.c b/drivers/net/ethernet/mediatek/mtk_eth_soc.c
+index b5408c5b954a..f89f225ab144 100644
+--- a/drivers/net/ethernet/mediatek/mtk_eth_soc.c
+++ b/drivers/net/ethernet/mediatek/mtk_eth_soc.c
+@@ -171,11 +171,21 @@ static int mt7621_gmac0_rgmii_adjust(struct mtk_eth *eth,
+ 	return 0;
+ }
+ 
+-static void mtk_gmac0_rgmii_adjust(struct mtk_eth *eth, int speed)
+static void mtk_gmac0_rgmii_adjust(struct mtk_eth *eth,
+				   phy_interface_t interface, int speed)
+ {
+ 	u32 val;
+ 	int ret;
+ 
+	if (interface == PHY_INTERFACE_MODE_TRGMII) {
+		mtk_w32(eth, TRGMII_MODE, INTF_MODE);
+		val = 500000000;
+		ret = clk_set_rate(eth->clks[MTK_CLK_TRGPLL], val);
+		if (ret)
+			dev_err(eth->dev, "Failed to set trgmii pll: %d\n", ret);
+		return;
+	}
+
+ 	val = (speed == SPEED_1000) ?
+ 		INTF_MODE_RGMII_1000 : INTF_MODE_RGMII_10_100;
+ 	mtk_w32(eth, val, INTF_MODE);
+@@ -262,10 +272,9 @@ static void mtk_mac_config(struct phylink_config *config, unsigned int mode,
+ 							      state->interface))
+ 					goto err_phy;
+ 			} else {
+-				if (state->interface !=
+-				    PHY_INTERFACE_MODE_TRGMII)
+-					mtk_gmac0_rgmii_adjust(mac->hw,
+-							       state->speed);
+				mtk_gmac0_rgmii_adjust(mac->hw,
+						       state->interface,
+						       state->speed);
+ 
+ 				/* mt7623_pad_clk_setup */
+ 				for (i = 0 ; i < NUM_TRGMII_CTRL; i++)
+-- 
+2.26.2
+
--- a/target/linux/mpc85xx/files/arch/powerpc/boot/dts/tl-wdr4900-v1.dts
+++ b/target/linux/mpc85xx/files/arch/powerpc/boot/dts/tl-wdr4900-v1.dts
@ -97,7 +97,7 @@
 					0x00004 0x07600000 /* PAD0_MODE */
 					0x00008 0x00000000 /* PAD5_MODE */
 					0x0000c 0x01000000 /* PAD6_MODE */
-					0x00010 0x40000000 /* POWER_ON_STRIP */
+					0x00010 0x40000000 /* POWER_ON_STRAP */
 					0x00050 0xcf35cf35 /* LED_CTRL0 */
 					0x00054 0xcf35cf35 /* LED_CTRL1 */
 					0x00058 0xcf35cf35 /* LED_CTRL2 */
--- a/target/linux/mvebu/image/cortexa9.mk
+++ b/target/linux/mvebu/image/cortexa9.mk
@ -108,6 +108,7 @@ define Device/linksys_wrt1900ac-v1
  DEVICE_DTS := armada-xp-linksys-mamba
  DEVICE_PACKAGES += mwlwifi-firmware-88w8864
  KERNEL_SIZE := 3072k
+  DEFAULT := n
 endef
 TARGET_DEVICES += linksys_wrt1900ac-v1

@ -141,6 +142,7 @@ define Device/linksys_wrt32x
  DEVICE_PACKAGES += kmod-btmrvl kmod-mwifiex-sdio mwlwifi-firmware-88w8964
  KERNEL_SIZE := 3072k
  KERNEL := kernel-bin | append-dtb
+  DEFAULT := n
 endef
 TARGET_DEVICES += linksys_wrt32x

--- a/target/linux/oxnas/image/ox810se.mk
+++ b/target/linux/oxnas/image/ox810se.mk
@ -6,15 +6,16 @@ define Device/Default
  KERNEL_INSTALL := 1
  FILESYSTEMS := squashfs ext4
  PROFILES := Default
+  SUPPORTED_DEVICES := $(subst _,$(comma),$(1))
+  DEVICE_DTS := ox810se-$(subst _,-,$(1))
  IMAGES := sysupgrade.tar
  IMAGE/sysupgrade.tar := sysupgrade-tar | append-metadata
 endef

-define Device/wd-mbwe
-  DEVICE_DTS := ox810se-wd-mbwe
+define Device/wd_mbwe
  DEVICE_VENDOR := Western Digital
  DEVICE_MODEL := My Book
  DEVICE_VARIANT := World Edition
  KERNEL := kernel-bin | append-dtb | uImage none
 endef
-TARGET_DEVICES += wd-mbwe
+TARGET_DEVICES += wd_mbwe
--- a/target/linux/ramips/dts/mt7621_dlink_dir-1960-a1.dts
+++ b/target/linux/ramips/dts/mt7621_dlink_dir-1960-a1.dts
@ -0,0 +1,57 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/dts-v1/;
+
+#include "mt7621_dlink_dir-xx60-a1.dtsi"
+
+/ {
+	compatible = "dlink,dir-1960-a1", "mediatek,mt7621-soc";
+	model = "D-Link DIR-1960 A1";
+
+	aliases {
+		led-boot = &led_power_orange;
+		led-failsafe = &led_power_white;
+		led-running = &led_power_white;
+		led-upgrade = &led_net_orange;
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		led_power_orange: power_orange {
+			label = "dir-1960-a1:orange:power";
+			gpios = <&gpio 8 GPIO_ACTIVE_LOW>;
+		};
+
+		led_power_white: power_white {
+			label = "dir-1960-a1:white:power";
+			gpios = <&gpio 16 GPIO_ACTIVE_LOW>;
+		};
+
+		led_net_orange: net_orange {
+			label = "dir-1960-a1:orange:net";
+			gpios = <&gpio 4 GPIO_ACTIVE_LOW>;
+		};
+
+		net_white {
+			label = "dir-1960-a1:white:net";
+			gpios = <&gpio 3 GPIO_ACTIVE_LOW>;
+		};
+
+		usb_white {
+			label = "dir-1960-a1:white:usb";
+			gpios = <&gpio 14 GPIO_ACTIVE_LOW>;
+			trigger-sources = <&xhci_ehci_port1>;
+			linux,default-trigger = "usbport";
+		};
+	};
+};
+
+&wifi0 {
+	mtd-mac-address = <&factory 0xe000>;
+	mtd-mac-address-increment = <1>;
+};
+
+&wifi1 {
+	mtd-mac-address = <&factory 0xe000>;
+	mtd-mac-address-increment = <2>;
+};
--- a/target/linux/ramips/dts/mt7621_dlink_dir-xx60-a1.dtsi
+++ b/target/linux/ramips/dts/mt7621_dlink_dir-xx60-a1.dtsi
@ -0,0 +1,163 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+
+#include "mt7621.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+/ {
+	aliases {
+		label-mac-device = &gmac0;
+	};
+
+	keys {
+		compatible = "gpio-keys";
+
+		reset {
+			label = "reset";
+			gpios = <&gpio 15 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_RESTART>;
+		};
+
+		wps {
+			label = "wps";
+			gpios = <&gpio 18 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_WPS_BUTTON>;
+		};
+	};
+};
+
+&nand {
+	status = "okay";
+
+	partitions {
+		compatible = "fixed-partitions";
+		#address-cells = <1>;
+		#size-cells = <1>;
+
+		partition@0 {
+			label = "Bootloader";
+			reg = <0x0 0x80000>;
+			read-only;
+		};
+
+		partition@80000 {
+			label = "config";
+			reg = <0x80000 0x80000>;
+			read-only;
+		};
+
+		factory: partition@100000 {
+			label = "factory";
+			reg = <0x100000 0x40000>;
+			read-only;
+		};
+
+		partition@140000 {
+			label = "config2";
+			reg = <0x140000 0x40000>;
+			read-only;
+		};
+
+		partition@180000 {
+			label = "firmware";
+			compatible = "sge,uimage";
+			reg = <0x180000 0x2800000>;
+		};
+
+		partition@2980000 {
+			label = "private";
+			reg = <0x2980000 0x2000000>;
+			read-only;
+		};
+
+		partition@4980000 {
+			label = "firmware2";
+			compatible = "sge,uimage";
+			reg = <0x4980000 0x2800000>;
+		};
+
+		partition@7180000 {
+			label = "mydlink";
+			reg = <0x7180000 0x600000>;
+			read-only;
+		};
+
+		partition@7780000 {
+			label = "reserved";
+			reg = <0x7780000 0x880000>;
+			read-only;
+		};
+	};
+};
+
+&pcie {
+	status = "okay";
+};
+
+&pcie0 {
+	wifi0: wifi@0,0 {
+		compatible = "mediatek,mt76";
+		reg = <0x0000 0 0 0 0>;
+		mediatek,mtd-eeprom = <&factory 0x0000>;
+		ieee80211-freq-limit = <2400000 2500000>;
+
+		led {
+			led-active-low;
+		};
+	};
+};
+
+&pcie1 {
+	wifi1: wifi@0,0 {
+		compatible = "mediatek,mt76";
+		reg = <0x0000 0 0 0 0>;
+		mediatek,mtd-eeprom = <&factory 0x8000>;
+		ieee80211-freq-limit = <5000000 6000000>;
+
+		led {
+			led-active-low;
+		};
+	};
+};
+
+&gmac0 {
+	mtd-mac-address = <&factory 0xe000>;
+};
+
+&switch0 {
+	ports {
+		port@0 {
+			status = "okay";
+			label = "lan4";
+		};
+
+		port@1 {
+			status = "okay";
+			label = "lan3";
+		};
+
+		port@2 {
+			status = "okay";
+			label = "lan2";
+		};
+
+		port@3 {
+			status = "okay";
+			label = "lan1";
+		};
+
+		port@4 {
+			status = "okay";
+			label = "wan";
+			mtd-mac-address = <&factory 0xe006>;
+		};
+	};
+};
+
+&state_default {
+	gpio {
+		groups = "i2c", "uart3", "jtag", "wdt";
+		function = "gpio";
+	};
+};
--- a/target/linux/ramips/dts/mt7621_winstars_ws-wn583a6.dts
+++ b/target/linux/ramips/dts/mt7621_winstars_ws-wn583a6.dts
@ -0,0 +1,150 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/dts-v1/;
+
+#include "mt7621.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+/ {
+	compatible = "winstars,ws-wn583a6", "mediatek,mt7621-soc";
+	model = "Winstars WS-WN583A6";
+
+	aliases {
+		led-boot = &led_status_red;
+		led-failsafe = &led_status_red;
+		led-running = &led_status_blue;
+		led-upgrade = &led_status_red;
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		night_light_white {
+			label = "ws-wn583a6:white:night_light";
+			gpios = <&gpio 15 GPIO_ACTIVE_HIGH>;
+		};
+
+		led_status_blue: status_blue {
+			label = "ws-wn583a6:blue:status";
+			gpios = <&gpio 22 GPIO_ACTIVE_LOW>;
+		};
+
+		status_amber {
+			label = "ws-wn583a6:amber:status";
+			gpios = <&gpio 24 GPIO_ACTIVE_LOW>;
+		};
+
+		led_status_red: status_red {
+			label = "ws-wn583a6:red:status";
+			gpios = <&gpio 25 GPIO_ACTIVE_LOW>;
+		};
+	};
+
+	keys {
+		compatible = "gpio-keys";
+
+		reset {
+			label = "reset";
+			gpios = <&gpio 18 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_RESTART>;
+		};
+
+		wps {
+			label = "wps";
+			gpios = <&gpio 13 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_WPS_BUTTON>;
+		};
+	};
+};
+
+&spi0 {
+	status = "okay";
+
+	flash@0 {
+		compatible = "jedec,spi-nor";
+		reg = <0>;
+		spi-max-frequency = <104000000>;
+		m25p,fast-read;
+
+		partitions {
+			compatible = "fixed-partitions";
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			partition@0 {
+				label = "bootloader";
+				reg = <0x0 0x30000>;
+				read-only;
+			};
+
+			partition@30000 {
+				label = "config";
+				reg = <0x30000 0x10000>;
+				read-only;
+			};
+
+			factory: partition@40000 {
+				label = "factory";
+				reg = <0x40000 0x10000>;
+				read-only;
+			};
+
+			partition@50000 {
+				compatible = "denx,uimage";
+				label = "firmware";
+				reg = <0x50000 0x7b0000>;
+			};
+		};
+	};
+};
+
+&pcie {
+	status = "okay";
+};
+
+&pcie0 {
+	wifi@0,0 {
+		compatible = "mediatek,mt76";
+		reg = <0x0000 0 0 0 0>;
+		mediatek,mtd-eeprom = <&factory 0x0000>;
+	};
+};
+
+&pcie1 {
+	wifi@0,0 {
+		compatible = "mediatek,mt76";
+		reg = <0x0000 0 0 0 0>;
+		mediatek,mtd-eeprom = <&factory 0x8000>;
+	};
+};
+
+&gmac0 {
+	mtd-mac-address = <&factory 0xe000>;
+};
+
+&switch0 {
+	ports {
+		port@0 {
+			status = "okay";
+			label = "wan";
+			mtd-mac-address = <&factory 0xe006>;
+		};
+
+		port@1 {
+			status = "okay";
+			label = "lan";
+		};
+	};
+};
+
+&state_default {
+	gpio {
+		groups = "jtag", "wdt", "rgmii2";
+		function = "gpio";
+	};
+};
+
+&xhci {
+	status = "disabled";
+};
--- a/target/linux/ramips/image/mt7621.mk
+++ b/target/linux/ramips/image/mt7621.mk
@ -232,6 +232,29 @@ define Device/dlink_dir-8xx-a1
 	check-size
 endef

+define Device/dlink_dir-xx60-a1
+  BLOCKSIZE := 128k
+  PAGESIZE := 2048
+  KERNEL_SIZE := 4096k
+  IMAGE_SIZE := 40960k
+  UBINIZE_OPTS := -E 5
+  DEVICE_VENDOR := D-Link
+  DEVICE_PACKAGES := kmod-mt7615e kmod-mt7615-firmware wpad-basic \
+	kmod-usb3 kmod-usb-ledtrig-usbport
+  KERNEL := $$(KERNEL) | uimage-padhdr 96
+  IMAGES += factory.bin
+  IMAGE/sysupgrade.bin := sysupgrade-tar | append-metadata
+  IMAGE/factory.bin := append-kernel | pad-to $$(KERNEL_SIZE) | append-ubi | \
+	check-size
+endef
+
+define Device/dlink_dir-1960-a1
+  $(Device/dlink_dir-xx60-a1)
+  DEVICE_MODEL := DIR-1960
+  DEVICE_VARIANT := A1
+endef
+TARGET_DEVICES += dlink_dir-1960-a1
+
 define Device/dlink_dir-860l-b1
  $(Device/seama)
  BLOCKSIZE := 64k
@ -1018,6 +1041,18 @@ define Device/wevo_w2914ns-v2
 endef
 TARGET_DEVICES += wevo_w2914ns-v2

+define Device/winstars_ws-wn583a6
+  $(Device/uimage-lzma-loader)
+  IMAGE_SIZE := 7872k
+  DEVICE_VENDOR := Winstars
+  DEVICE_MODEL := WS-WN583A6
+  DEVICE_ALT0_VENDOR := Gemeita
+  DEVICE_ALT0_MODEL := AC2100
+  KERNEL_INITRAMFS_SUFFIX := -WN583A6$$(KERNEL_SUFFIX)
+  DEVICE_PACKAGES := kmod-mt7603 kmod-mt7615e kmod-mt7615-firmware wpad-basic
+endef
+TARGET_DEVICES += winstars_ws-wn583a6
+
 define Device/xiaomi-ac2100
  $(Device/uimage-lzma-loader)
  BLOCKSIZE := 128k
--- a/target/linux/ramips/mt7621/base-files/etc/board.d/01_leds
+++ b/target/linux/ramips/mt7621/base-files/etc/board.d/01_leds
@ -26,6 +26,9 @@ d-team,pbr-m1|\
 gehua,ghl-r-001)
 	ucidef_set_led_netdev "internet" "internet" "$boardname:blue:internet" "wan"
 	;;
+dlink,dir-1960-a1)
+	ucidef_set_led_netdev "wan" "wan" "$boardname:white:net" "wan"
+	;;
 dlink,dir-860l-b1|\
 dlink,dir-867-a1|\
 dlink,dir-878-a1|\
--- a/target/linux/ramips/mt7621/base-files/etc/board.d/02_network
+++ b/target/linux/ramips/mt7621/base-files/etc/board.d/02_network
@ -9,7 +9,8 @@ ramips_setup_interfaces()
 	local board="$1"

 	case $board in
-	asiarf,ap7621-001)
+	asiarf,ap7621-001|\
+	winstars,ws-wn583a6)
 		ucidef_set_interfaces_lan_wan "lan" "wan"
 		;;
 	asiarf,ap7621-nv1|\
@ -119,6 +120,7 @@ ramips_setup_macs()
 		wan_mac=$label_mac
 		lan_mac=$(macaddr_add $label_mac 1)
 		;;
+	winstars,ws-wn583a6|\
 	zbtlink,zbt-we1326|\
 	zbtlink,zbt-wg3526-16m|\
 	zbtlink,zbt-wg3526-32m)
--- a/target/linux/ramips/mt7621/base-files/etc/board.d/03_gpio_switches
+++ b/target/linux/ramips/mt7621/base-files/etc/board.d/03_gpio_switches
@ -7,9 +7,6 @@ board_config_update
 board=$(board_name)

 case "$board" in
-mikrotik,routerboard-750gr3)
-	ucidef_add_gpio_switch "poe_passthrough" "PoE Passthrough" "17"
-	;;
 telco-electronics,x1)
 	ucidef_add_gpio_switch "modem_reset" "Modem Reset" "16"
 	;;
--- a/target/linux/ramips/mt7621/base-files/lib/upgrade/platform.sh
+++ b/target/linux/ramips/mt7621/base-files/lib/upgrade/platform.sh
@ -44,6 +44,7 @@ platform_do_upgrade() {
 	case "$board" in
 	asus,rt-ac65p|\
 	asus,rt-ac85p|\
+	dlink,dir-1960-a1|\
 	hiwifi,hc5962|\
 	linksys,ea7300-v1|\
 	linksys,ea7500-v2|\