mirror of
https://github.com/hanwckf/immortalwrt-mt798x.git
synced 2025-01-10 03:09:08 +08:00
mediatek: mt7623: prepare for full sysupgrade support on UniElec U7623
An upcoming commit will add a full system image for U7623 which will contain the MBR partition table and U-Boot too. That contrasts with the current image which only owns the eMMC from sector 0xa00 onwards, and must start with a legacy uImage. Prepare for sysupgrade to the new images, and cope with the fact that the recovery partition will be /dev/mmcblk0p2 instead of /dev/mmcblk0p1 after the upgrade. This commit could potentially be backported to 19.07 to allow for direct sysupgrade to the new image layout. Signed-off-by: David Woodhouse <dwmw2@infradead.org>
This commit is contained in:
David Woodhouse
Chuanhong Guo
parent
7a1eaa446b
commit
29fa5526a2
@ -10,7 +10,11 @@ move_config() {
|
||||
partnum=2
|
||||
;;
|
||||
unielec,u7623-02-emmc-512m)
|
||||
partnum=1
|
||||
if grep -q root=/dev/mmcblk0p2 /proc/cmdline; then
|
||||
partnum=1;
|
||||
else
|
||||
partnum=2;
|
||||
fi
|
||||
;;
|
||||
*)
|
||||
return 1
|
||||
|
||||
@ -1,92 +1,113 @@
|
||||
|
||||
REQUIRE_IMAGE_METADATA=1
|
||||
|
||||
# Full system upgrade including preloader for MediaTek SoCs on eMMC or SD
|
||||
mtk_mmc_full_upgrade() {
|
||||
local diskdev partdev diff oldrecovery
|
||||
|
||||
if grep -q root=/dev/mmcblk0p2 /proc/cmdline; then
|
||||
oldrecovery=1
|
||||
else
|
||||
oldrecovery=2
|
||||
fi
|
||||
|
||||
export_bootdevice && export_partdevice diskdev 0 || {
|
||||
echo "Unable to determine upgrade device"
|
||||
return 1
|
||||
}
|
||||
|
||||
#Keep the persistent random mac address (if it exists)
|
||||
mkdir -p /tmp/recovery
|
||||
export_partdevice recoverydev $oldrecovery
|
||||
if mount -o rw,noatime "/dev/$recoverydev" -tvfat /tmp/recovery; then
|
||||
[ -f "/tmp/recovery/mac_addr" ] && cp /tmp/recovery/mac_addr /tmp/
|
||||
umount /tmp/recovery
|
||||
fi
|
||||
sync
|
||||
|
||||
if [ "$SAVE_PARTITIONS" = "1" ]; then
|
||||
get_partitions "/dev/$diskdev" bootdisk
|
||||
|
||||
#extract the boot sector from the image
|
||||
get_image "$@" | dd of=/tmp/image.bs count=1 bs=512b
|
||||
|
||||
get_partitions /tmp/image.bs image
|
||||
|
||||
#compare tables
|
||||
diff="$(grep -F -x -v -f /tmp/partmap.bootdisk /tmp/partmap.image)"
|
||||
else
|
||||
diff=1
|
||||
fi
|
||||
|
||||
if [ -n "$diff" ]; then
|
||||
get_image "$@" | dd of="/dev/$diskdev" bs=4096 conv=fsync
|
||||
|
||||
# Separate removal and addition is necessary; otherwise, partition 1
|
||||
# will be missing if it overlaps with the old partition 2
|
||||
partx -d - "/dev/$diskdev"
|
||||
partx -a - "/dev/$diskdev"
|
||||
else
|
||||
# iterate over each partition from the image and write it to the boot disk
|
||||
while read part start size; do
|
||||
part="$(($part - 2))"
|
||||
if export_partdevice partdev $part; then
|
||||
echo "Writing image to /dev/$partdev..."
|
||||
get_image "$@" | dd of="/dev/$partdev" ibs="512" obs=1M skip="$start" count="$size" conv=fsync
|
||||
else
|
||||
echo "Unable to find partition $part device, skipped."
|
||||
fi
|
||||
done < /tmp/partmap.image
|
||||
|
||||
#copy partition uuid
|
||||
echo "Writing new UUID to /dev/$diskdev..."
|
||||
get_image "$@" | dd of="/dev/$diskdev" bs=1 skip=440 count=4 seek=440 conv=fsync
|
||||
fi
|
||||
|
||||
export_partdevice recoverydev 2
|
||||
if mount -o rw,noatime "/dev/$recoverydev" -t vfat /tmp/recovery; then
|
||||
[ -f "/tmp/mac_addr" ] && cp /tmp/mac_addr /tmp/recovery
|
||||
|
||||
if [ "$diskdev" = "mmcblk0" -a -r /tmp/recovery/eMMCboot.bin ]; then
|
||||
echo 0 > /sys/block/mmcblk0boot0/force_ro
|
||||
dd if=/tmp/recovery/eMMCboot.bin of=/dev/mmcblk0boot0 conv=fsync
|
||||
sync
|
||||
echo 1 > /sys/block/mmcblk0boot0/force_ro
|
||||
fi
|
||||
sync
|
||||
umount /tmp/recovery
|
||||
fi
|
||||
}
|
||||
|
||||
platform_do_upgrade() {
|
||||
local board=$(board_name)
|
||||
|
||||
case "$board" in
|
||||
bananapi,bpi-r2)
|
||||
local diskdev partdev diff
|
||||
|
||||
export_bootdevice && export_partdevice diskdev 0 || {
|
||||
echo "Unable to determine upgrade device"
|
||||
return 1
|
||||
}
|
||||
|
||||
#Keep the persistent random mac address (if it exists)
|
||||
mkdir -p /tmp/recovery
|
||||
export_partdevice recoverydev 2
|
||||
if mount -o rw,noatime "/dev/$recoverydev" -tvfat /tmp/recovery; then
|
||||
[ -f "/tmp/recovery/mac_addr" ] && cp /tmp/recovery/mac_addr /tmp/
|
||||
umount /tmp/recovery
|
||||
fi
|
||||
sync
|
||||
|
||||
if [ "$SAVE_PARTITIONS" = "1" ]; then
|
||||
get_partitions "/dev/$diskdev" bootdisk
|
||||
|
||||
#extract the boot sector from the image
|
||||
get_image "$@" | dd of=/tmp/image.bs count=1 bs=512b
|
||||
|
||||
get_partitions /tmp/image.bs image
|
||||
|
||||
#compare tables
|
||||
diff="$(grep -F -x -v -f /tmp/partmap.bootdisk /tmp/partmap.image)"
|
||||
else
|
||||
diff=1
|
||||
fi
|
||||
|
||||
if [ -n "$diff" ]; then
|
||||
get_image "$@" | dd of="/dev/$diskdev" bs=4096 conv=fsync
|
||||
|
||||
# Separate removal and addtion is necessary; otherwise, partition 1
|
||||
# will be missing if it overlaps with the old partition 2
|
||||
partx -d - "/dev/$diskdev"
|
||||
partx -a - "/dev/$diskdev"
|
||||
else
|
||||
#iterate over each partition from the image and write it to the boot disk
|
||||
while read part start size; do
|
||||
part="$(($part - 2))"
|
||||
if export_partdevice partdev $part; then
|
||||
echo "Writing image to /dev/$partdev..."
|
||||
get_image "$@" | dd of="/dev/$partdev" ibs="512" obs=1M skip="$start" count="$size" conv=fsync
|
||||
else
|
||||
echo "Unable to find partition $part device, skipped."
|
||||
fi
|
||||
done < /tmp/partmap.image
|
||||
|
||||
#copy partition uuid
|
||||
echo "Writing new UUID to /dev/$diskdev..."
|
||||
get_image "$@" | dd of="/dev/$diskdev" bs=1 skip=440 count=4 seek=440 conv=fsync
|
||||
fi
|
||||
|
||||
if mount -o rw,noatime "/dev/$recoverydev" -t vfat /tmp/recovery; then
|
||||
[ -f "/tmp/mac_addr" ] && cp /tmp/mac_addr /tmp/recovery
|
||||
|
||||
if [ "$diskdev" = "mmcblk0" -a -r /tmp/recovery/eMMCboot.bin ]; then
|
||||
echo 0 > /sys/block/mmcblk0boot0/force_ro
|
||||
dd if=/tmp/recovery/eMMCboot.bin of=/dev/mmcblk0boot0 conv=fsync
|
||||
sync
|
||||
echo 1 > /sys/block/mmcblk0boot0/force_ro
|
||||
fi
|
||||
sync
|
||||
umount /tmp/recovery
|
||||
fi
|
||||
mtk_mmc_full_upgrade "$1"
|
||||
;;
|
||||
|
||||
unielec,u7623-02-emmc-512m)
|
||||
#Keep the persisten random mac address (if it exists)
|
||||
mkdir -p /tmp/recovery
|
||||
mount -o rw,noatime /dev/mmcblk0p1 /tmp/recovery
|
||||
[ -f "/tmp/recovery/mac_addr" ] && \
|
||||
mv -f /tmp/recovery/mac_addr /tmp/
|
||||
umount /tmp/recovery
|
||||
local magic="$(get_magic_long "$1")"
|
||||
if [ "$magic" = "53444d4d" ]; then
|
||||
mtk_mmc_full_upgrade "$1"
|
||||
else # Old partial image starting with uImage
|
||||
# Keep the persistent random mac address (if it exists)
|
||||
recoverydev=mmcblk0p1
|
||||
mkdir -p /tmp/recovery
|
||||
mount -o rw,noatime /dev/$recoverydev /tmp/recovery
|
||||
[ -f "/tmp/recovery/mac_addr" ] && \
|
||||
mv -f /tmp/recovery/mac_addr /tmp/
|
||||
umount /tmp/recovery
|
||||
|
||||
#1310720 is the offset in bytes from the start of eMMC and to
|
||||
#the location of the kernel (2560 512 byte sectors)
|
||||
get_image "$1" | dd of=/dev/mmcblk0 bs=1310720 seek=1 conv=fsync
|
||||
# 1310720 is the offset in bytes from the start of eMMC and to
|
||||
# the location of the kernel (2560 512 byte sectors)
|
||||
get_image "$1" | dd of=/dev/mmcblk0 bs=1310720 seek=1 conv=fsync
|
||||
|
||||
mount -o rw,noatime /dev/mmcblk0p1 /tmp/recovery
|
||||
[ -f "/tmp/mac_addr" ] && mv -f /tmp/mac_addr /tmp/recovery
|
||||
sync
|
||||
umount /tmp/recovery
|
||||
mount -o rw,noatime /dev/$recoverydev /tmp/recovery
|
||||
[ -f "/tmp/mac_addr" ] && mv -f /tmp/mac_addr /tmp/recovery
|
||||
sync
|
||||
umount /tmp/recovery
|
||||
fi
|
||||
;;
|
||||
*)
|
||||
default_do_upgrade "$1"
|
||||
@ -133,10 +154,21 @@ platform_check_image() {
|
||||
fi
|
||||
;;
|
||||
unielec,u7623-02-emmc-512m)
|
||||
# Can always upgrade to the new-style full image
|
||||
[ "$magic" = "53444d4d" ] && return 0
|
||||
|
||||
# Legacy uImage directly at 0xA00 on the eMMC.
|
||||
[ "$magic" != "27051956" ] && {
|
||||
echo "Invalid image type."
|
||||
return 1
|
||||
}
|
||||
rootpart=$(cat /proc/cmdline)
|
||||
rootpart="${rootpart##*root=}"
|
||||
rootpart="${rootpart%% *}"
|
||||
[ "$rootpart" != "/dev/mmcblk0p2" ] && {
|
||||
echo "Cannot downgrade to legacy image."
|
||||
return 1
|
||||
}
|
||||
return 0
|
||||
;;
|
||||
*)
|
||||
@ -148,25 +180,18 @@ platform_check_image() {
|
||||
return 0
|
||||
}
|
||||
|
||||
platform_copy_config_emmc() {
|
||||
local partdev
|
||||
|
||||
if export_bootdevice && export_partdevice partdev $1; then
|
||||
mkdir -p /recovery
|
||||
mount -o rw,noatime "/dev/$partdev" -t vfat /recovery
|
||||
cp -af "$UPGRADE_BACKUP" "/recovery/$BACKUP_FILE"
|
||||
sync
|
||||
umount /recovery
|
||||
fi
|
||||
}
|
||||
|
||||
platform_copy_config() {
|
||||
case "$(board_name)" in
|
||||
bananapi,bpi-r2)
|
||||
platform_copy_config_emmc 2
|
||||
;;
|
||||
bananapi,bpi-r2|\
|
||||
unielec,u7623-02-emmc-512m)
|
||||
platform_copy_config_emmc 1
|
||||
# platform_do_upgrade() will have set $recoverydev
|
||||
if [ -n "$recoverydev" ]; then
|
||||
mkdir -p /tmp/recovery
|
||||
mount -o rw,noatime "/dev/$recoverydev" -t vfat /tmp/recovery
|
||||
cp -af "$UPGRADE_BACKUP" "/tmp/recovery/$BACKUP_FILE"
|
||||
sync
|
||||
umount /tmp/recovery
|
||||
fi
|
||||
;;
|
||||
esac
|
||||
}
|
||||
|
||||
Loading…
x
Reference in New Issue
Block a user