/* * $smu-mark$ * $name: usage.c$ * $author: Salvatore Sanfilippo $ * $copyright: Copyright (C) 1999 by Salvatore Sanfilippo$ * $license: This software is under GPL version 2 of license$ * $date: Fri Nov 5 11:55:50 MET 1999$ * $rev: 8$ */ /* $Id: usage.c,v 1.13 2003/08/07 23:55:55 antirez Exp $ */ #include #include #include void show_usage(void) { printf( "usage: hping host [options]\n" " -h --help show this help\n" " -v --version show version\n" " -c --count packet count\n" " -i --interval wait (uX for X microseconds, for example -i u1000)\n" " --fast alias for -i u10000 (10 packets for second)\n" " --flood sent packets as fast as possible. Don't show replies.\n" " -n --numeric numeric output\n" " -q --quiet quiet\n" " -I --interface interface name (otherwise default routing interface)\n" " -V --verbose verbose mode\n" " -D --debug debugging info\n" " -z --bind bind ctrl+z to ttl (default to dst port)\n" " -Z --unbind unbind ctrl+z\n" "Mode\n" " default mode TCP\n" " -0 --rawip RAW IP mode\n" " -1 --icmp ICMP mode\n" " -2 --udp UDP mode\n" " -6 --ipv6 IPv6 mode\n" " -8 --scan SCAN mode.\n" " Example: hping --scan 1-30,70-90 -S www.target.host\n" " -9 --listen listen mode\n" "IP\n" " -a --spoof spoof source address\n" " --rand-dest random destionation address mode. see the man.\n" " --rand-source random source address mode. see the man.\n" " -t --ttl ttl (default 64)\n" " -N --id id (default random)\n" " -W --winid use win* id byte ordering\n" " -r --rel relativize id field (to estimate host traffic)\n" " -f --frag split packets in more frag. (may pass weak acl)\n" " -x --morefrag set more fragments flag\n" " -y --dontfrag set dont fragment flag\n" " -g --fragoff set the fragment offset\n" " -m --mtu set virtual mtu, implies --frag if packet size > mtu\n" " -o --tos type of service (default 0x00), try --tos help\n" " -G --rroute includes RECORD_ROUTE option and display the route buffer\n" " --lsrr loose source routing and record route\n" " --ssrr strict source routing and record route\n" " -H --ipproto set the IP protocol field, only in RAW IP mode\n" "ICMP\n" " -C --icmptype icmp type (default echo request)\n" " -K --icmpcode icmp code (default 0)\n" " --force-icmp send all icmp types (default send only supported types)\n" " --icmp-gw set gateway address for ICMP redirect (default 0.0.0.0)\n" " --icmp-ts Alias for --icmp --icmptype 13 (ICMP timestamp)\n" " --icmp-addr Alias for --icmp --icmptype 17 (ICMP address subnet mask)\n" " --icmp-help display help for others icmp options\n" "UDP/TCP\n" " -s --baseport base source port (default random)\n" " -p --destport [+][+] destination port(default 0) ctrl+z inc/dec\n" " -k --keep keep still source port\n" " -w --win winsize (default 64)\n" " -O --tcpoff set fake tcp data offset (instead of tcphdrlen / 4)\n" " -Q --seqnum shows only tcp sequence number\n" " -b --badcksum (try to) send packets with a bad IP checksum\n" " many systems will fix the IP checksum sending the packet\n" " so you'll get bad UDP/TCP checksum instead.\n" " -M --setseq set TCP sequence number\n" " -L --setack set TCP ack\n" " -F --fin set FIN flag\n" " -S --syn set SYN flag\n" " -R --rst set RST flag\n" " -P --push set PUSH flag\n" " -A --ack set ACK flag\n" " -U --urg set URG flag\n" " -X --xmas set X unused flag (0x40)\n" " -Y --ymas set Y unused flag (0x80)\n" " --tcpexitcode use last tcp->th_flags as exit code\n" " --tcp-timestamp enable the TCP timestamp option to guess the HZ/uptime\n" "Common\n" " -d --data data size (default is 0)\n" " -E --file data from file\n" " -e --sign add 'signature'\n" " -j --dump dump packets in hex\n" " -J --print dump printable characters\n" " -B --safe enable 'safe' protocol\n" " -u --end tell you when --file reached EOF and prevent rewind\n" " -T --traceroute traceroute mode (implies --bind and --ttl 1)\n" " --tr-stop Exit when receive the first not ICMP in traceroute mode\n" " --tr-keep-ttl Keep the source TTL fixed, useful to monitor just one hop\n" " --tr-no-rtt Don't calculate/show RTT information in traceroute mode\n" "ARS packet description (new, unstable)\n" " --apd-send Send the packet described with APD (see docs/APD.txt)\n" ); exit(0); }; void tos_help(void) { printf( "tos help:\n" " TOS Name Hex Value Typical Uses\n" "\n" " Minimum Delay 10 ftp, telnet\n" " Maximum Throughput 08 ftp-data\n" " Maximum Reliability 04 snmp\n" " Minimum Cost 02 nntp\n" ); exit(0); } void icmp_help(void) { printf( "ICMP help:\n" " ICMP concerned packet options:\n" " --icmp-ipver set ip version ( default 4 )\n" " --icmp-iphlen set ip header lenght ( default IPHDR_SIZE >> 2)\n" " --icmp-iplen set ip total lengtht ( default real lenght )\n" " --icmp-ipid set ip id ( default random )\n" " --icmp-ipproto set ip protocol ( default IPPROTO_TCP )\n" " --icmp-ipsrc set ip source ( default 0.0.0.0 )\n" " --icmp-ipdst set ip destination ( default 0.0.0.0 )\n" " --icmp-srcport set tcp/udp source port ( default random )\n" " --icmp-dstport set tcp/udp destination port ( default random )\n" " --icmp-cksum set icmp checksum ( default the right cksum)\n" ); exit(0); } void route_help(void) { printf( "route help:\n" " A route has the following format: [ptr:]IP1[/IP2[/IP3...]]\n" " where ptr is the exact value of the pointer that will be used for the IP\n" " option (be careful, no check is performed on this pointer), and defaults\n" " to 8, or 4 if provided route is too short for 8;\n" " and each IPx field is an IP address to include in the source route.\n"); }